Used Briquetting Presses Comafer 70N 2012 for sale (13,146)

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Nwedov Rpxlopfx Aazjl Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x1170x1510 mm Weight 650 kg Njdpfxsvz Eqfj Aazowl Total power requirement 6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1850x1500x1230 mm Weight 870 kg Nwedpfxsvz Eqlj Aazjl Total power requirement 8 kw

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Nwodpfxsxy E H Hj Aazel Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x1600x1500 mm Nedpfx Aevz Efvjazswl Weight 1550 kg Total power requirement 11,5 kw

Condition: as good as new (ex-display), Demonstration machine The new briquetting press 35F from Holzprofi impresses with its sophisticated, simple and solid construction. The press is designed for trade and industry. Made in EU! Technical data: Total motor output 6.0 kW (5.1 kW S1) Briquette diameter 50 mm Power consumption approx. 2200 W/h Capacity 25 - 40 kg/hr Chip bunker 0.33 m³ Weight 400 kg Weight of briquettes approx. 900 kg/m³ Nodjvrvp Hopfx Aazewl Sound pressure level less than 70 dB Dimensions: 1860 x 890 x 1100 mm Special equipment as standard: Automatic change of direction of rotation of the shaft Automatic switch-off Symbolic photo! Prices subject to change, errors, printing and typesetting errors reserved

Condition: as good as new (ex-display), Demonstration Machine Nwedpjvr I N Sofx Aazel The new 70F briquetting press from Holzprofi impresses with its sophisticated, simple, and robust design. The press is designed for commercial and industrial applications. Made in the EU! Technical data: Motor output (continuous duty): 7.5 kW Briquette diameter: 70 mm Power consumption approx.: 4900 W/h Output capacity: 60–80 kg/h Chip hopper: 0.75 m³ Weight: 810 kg Briquette density approx.: 900–1100 kg/m³ Sound pressure level: less than 70 dB Dimensions: 2220 x 1200 x 1510 mm Standard special equipment: Automatic shaft rotation direction reversal Automatic shutdown Sample image! Price subject to change. Errors and omissions excepted.

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Tank diameter: 1000 mm Tank height: 930+1000+2400 (filter) mm Capacity: ~60 kg/h Power supply: 380V Motor power: 5.5 kW Safety switch Option to purchase the filter separately Filter dimensions: Nedpfx Aaozd Erdjzswl Connection diameter: 1000 mm Width: 1700 mm Height: 2400 mm Overall dimensions: Length: 1600 mm Width: 1200 mm Height: 1500+1000+2400 mm

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 27 h, one machine directly available *Prior sale expressly reserved *Round silo at extra charge Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction Hydraulic briquetting press for rectangular briquettes Type R - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics + 25 years of experience . * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material . Drive motor: 22 kW - IE 3 400 V / 50 Hz / 3 phases Oil cooler: 2.2 kW Agitator: 0.55 kW Screw: 1.5 kW Nwedsgbpm Tspfx Aazsl . Hopper: 400x800mm Capacity of approx. 150 liters . Soft start for hydraulic motor Siemens PLC S7-1200 . Auto start and stop via a light barrier integrated in the feed hopper Up to 560 briquettes per hour . Specific pressing pressure: 1,700 kg / cm² Up to 300 bar pressing pressure Briquette format 150x60 mm Briquette length: 40 to 110 mm (adjustable) Dimensions: 2.9 x 2.0 x 2.1 m Weight: 3,800 kg. 600 liter hydraulic oil tank The control is designed for operation from + 10 degrees to +35 degrees . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - Installation temperature: temperature-controlled room at at least + 8 ° C Otherwise, we recommend heating for an extra charge - The loading must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result.

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Nwodsgfm Ryopfx Aazel Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: like new (used), Year of construction: 2014, briquette diameter: 150 mm, overall weight: 3,000 kg, power: 30 kW (40.79 HP), Capacity: 450-500 kg/h Max. pressure force: 1700kg/cm2 Batch moisture content: 15% Length: 1800 mm Width: 1800 mm Height: 1900 mm Transport height: 2200 mm Nedoqd Uy Aopfx Aazowl Weight: 3000 kg Total power: 33 kW

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Nodpfx Ao E Dqusazjwl Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: new, Year of construction: 2026, THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips produced in the wood processing industry. The briquetting process can generate additional revenue and reduce storage and transportation costs. Another advantage is the flexibility of our wood briquetting presses. You can press different material grains into high-quality briquettes without any binding agents. As a valuable source of energy, RUF briquettes therefore have a higher utility value and an optimum CO2 balance. Our LIGNUM series also shines thanks to the innovative RUF hydraulics with high energy efficiency and low wear. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Long service life - Low maintenance costs - Compact design - Direct integration into existing production systems possible - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquettes - Without binder - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Nsdpfx Aeq Rut Teazewl Technical data RUF LIGNUM CLASSIC Max. throughput of wood (kg/h) 410 Motor power (kW) 30 Max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Dimensions (m) length x width x height 2.1 x 1.9 x 2.0 Approx. weight (t) 3.3 t Availability/delivery time after consultation

Condition: new, Year of construction: 2026, BRIQUETTING WOOD CHIPS AND GENERATING MORE REVENUE Nwodpfx Asq Ruvvoazjl With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way - without the use of binding agents. The briquetting process allows you to achieve higher yields while reducing transportation and storage costs. Our robust wood briquetting presses from the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Long service life & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - More revenue for briquettes - Without binding agent - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Technical data RUF LIGNUM R4 Max. throughput of wood (kg/h) 590 Motor power (kW) 30 max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Dimensions (m) length x width x height 2.9 x 2.1 x 2.1 Approx. weight (t) 4.1 t Availability/delivery time after consultation

Condition: good (used), Used machine, good condition. Delivery time appr. 7 weeks after ordering The basic machine starts at 135.000 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Nodpfx Aefmqq Eeazowl Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: like new (used), Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Nwedpfsgl Nlmsx Aazsl Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW. Nwjdpfx Aaogv I N Uozjl SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 200mm 2. Capacity: 12.000 kg/hour ( Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 850 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 10 - 12 sec 7. Electric Motor Power: 6x37=222 kW (Main Motors) 8. Machine Dimensions : 11.000mm x 10.000mm 9. Machine Weight: 60.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: Eco Ring Rotor (for reduced energy consumption) Options: Veneer and paper scraper + €970 net * recommended for extremely thin materials with a thickness of less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction lumber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos. Machine data: Motor: 11 kW; 400 V - 50 Hz - 3 phase, Knives: multi-reversible, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Hydraulically operated slide, Screen size optional (10 - 40mm), Suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30% (dry basis). Standard included: • Fast hydraulics • Profile rotor Nsdpfx Asd Db N Ijazewl • Control cabinet with Siemens PLC control • Automatic star/delta start • Automatic OFF when the rotor is idling • Removable suction channel • Speed 70 - 100 RPM for higher throughput • Cycle control to avoid idle times • Performance-enhancing step control of the hydraulic slide • Stable guides for the hydraulic slide Further shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Over-belt magnet + €5,980 net - Control for conveyor belt and over-belt magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the input/raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 80mm 2. Capacity: 700-900 kg/hour ( Copper ) Nwjdpegwa Urjfx Aazel 3. Preliminary Compression Ram Thrust: 12.5 tons 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 seconds 7. Electric Motor Power: 30 kW 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: used, Technical data: Briquette diameter: 50 mm Nodsy N Taijpfx Aazewl Briquette length: 50 mm Hopper diameter: 1000 mm Hopper height: 920+1000 mm Throughput: approx. 50 kg/h Power supply: 380 V Motor power: 4 kW Emergency stop switch Overall dimensions: Length: 1600 mm Width: 1100 mm Height: 1500+1000 mm

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Nwodpfefhql Tox Aazsl Total power consumption of the briquette press: approx. 33 KW Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x1800x1900 mm Weight 3000 kg Total power requirement 33,5 kw Nedpfx Aasvz Ex Njzowl

Condition: like new (used), Year of construction: 2025, functionality: fully functional, briquette diameter: 50 mm, overall weight: 340 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 60 l, pressing force: 8 t, operating pressure: 270 bar, Equipment: cooling unit, Hydraulic briquetting press with 4 kW main motor. It produces 50mm diameter briquettes. Capacity of the machine is: 20-30 kg/hour. The raw material hopper is 50 liter. The machine has an oil cooler for the continous work. Nwedpfxef Hmi Ee Aazol

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Nwjdpfxefci D Ae Aazjl Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) ---

Condition: new, The new 100F briquetting press from Holzprofi impresses with its mature, simple and solid construction. The press is designed for trade and industry. Made in EU ! Technical data: Motor output power 100% ED 11 kW Nsdpfxjvrvfne Aazswl Briquette diameter 70 mm Power consumption approx. 8200 W/h Capacity 90 - 120 kg/h Chip bunker 0.75 m³ Weight 810 kg weight briquettes approx. 900 - 1100 Kg/m³ Sound pressure level 68 dB Dimensions: 2220 x 1200 x 1510 mm standard equipment: With built-on oil cooler Vibration unit to prevent bridging of sawdust Automatic change of direction of rotation of the shaft Automatic switch-off Timer to start machine Special equipment on request: Carousel with 5 containers Filtering unit Modification of silo to fit filter systems of all manufacturers (eg AL-KO, Felder, Scheuch Lingo, Airmex, Nestro, Schuko, Höcker)