Briquetting Press

mütek MAP 1200

Refurbished machine
Basic machine starts at 145.000 € net
*Options at additional cost, see below

with a full 1 year warranty
one machine is directly available

Technical specifications:
Throughput up to 1200 kg / h depending on the material
(e.g. sawdust with a bulk weight of 150/180 kg / qbm)
Briquette Ø 75 mm
including 2 m press channel
Main motor power 45 kW
Feed screw gear motor 2 x 2.2 kw
Compressor screw 2 x 5.5 kw
Distribution auger 2.2 kw
Hydraulic pump motor 0.37 kW
Total connected load 65 KW
Control panel with plain text display for operating states
and utilization display for main drive and feed screws
PLC control Siemens S7 / 300 with operating hours counter in the control cabinet
Machine hat CE mark
Automatic start / stop function of the machine
Dimensions 3100x860x1800 mm lxwxh
Weight 4500 kg

Options:

-Silo for MAP series
Storage silo above the machine -
Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator.
19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo

if you need to place two machines MAP 1200 below one silo it needs to be build completely different.
the price for this silo is 37.900 € net

-Temperature control device for the pressing tools
to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat
Wired ready for connection - must be left for operation
including corresponding control
€ 7.850 net

Oil heater
1.950 € net

-Guillotine, to cut the briquettes to length
Create a compressed air connection on site
€ 6,940 net plus VAT

-Transport line / cooling section (nominal value: 4x2m)
990 euros net per 2 meters

- Control System
4.995 € net

Assembly / commissioning (nominal value approx. 2-3 days on site to install one press)
based on effort and upon proof against separate invoice. The following sentences apply:
Service technician/mechatronics technician per assembly and hour of travel: €129.00
Ledpfe E Dqusx Afwshk
Overtime: 25% surcharge
50% surcharge per Saturday and night hour
100% surcharge for every Sunday and public holiday hour
Release per fitter per day: country dependent
Per car, van and driving kilometer: €0.98 / km
Arrival and overnight stay against receipt or flat rate bill at the client's expense.
.
Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate

---
Recognition from the raw material:
- The moisture content must be between a minimum of 6 and a maximum of 18%
- Maximum span 20 mm
- Excessive temperature: temperate room at at least + 5 ° C.
- The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result