Used Cfs Frozen Block Grinder for sale (4,807)

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Block, transformer type B 9412234 -Power: 8000 VA -Technical data: see photo identification plate -Number: 6 x transformer available Lhsdsh Hbxijpfx Aggsl -Price per piece -Dimensions: 295/120/H280 mm -Weight: 32 kg/pc.

Condition: used, PLC control, electronic module, interference filter, power supply line filter, ballast, line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Sew Block, line filter interference filter -Type: NF 063-503 HLD 110-500/55 -Voltage: 3x 500/520V 50 - 60Hz -Dimensions: 250/85/H95 mm Ljdsrfzt Tspfx Aggohl -Weight: 2.8 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1190 mm -Cross-section: 150 x 65 mm Ledjpm Thdopfx Aggohl -Photo: 600 mm (see sketch in the photos) -Transport dimensions: 1430/910/H190 mm -Weight: 280 kg

Condition: good (used), Circuit breaker, electrical circuit breaker, electronic circuit breaker -Manufacturer: Block, Electronic circuit breaker 24 V -Type: PCInput: DC 24 V / 70 A Ljdpfxjxn Ik De Aggjhl -Output: DC 24V / 8x 2-10A -Number: 2x circuit breakers available -Price: per piece -Dimensions: 125/40/H130 mm -Weight: 0.4 kg/piece

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, cutting knife, knife set, bacon cutter, gate, cutting gate -Manufacturer:CFS Convenience Food Systems,Cutting knife set for cut knife 300/400 -Type: .: 39441 1 set = 4 pieces -Quantity: 6 sets available -Price: Per set -Dimensions Bos: 135/70/H55 mm Lhjdpfxjwy Uqko Aggjl -Weight: 1.2 kg

Condition: good (used), Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer, unstab. DC power supply, Contactor -Manufacturer: Block, Unstab. DC power supply -Type: SDV 400/24-15 -Entrance: 3Ph. 400V V -Output 24V - 15A -Technical data: see photo nameplate Ledpfx Aerw A U Dsggshl -Dimensions: 170/200/H270 mm -Weight: 8.5 kg

Condition: good (used), Power supply unit, DIN rail power supply unit, switching power supply unit -Manufacturer: Block, DIN rail power supply Ledpfxsxw R Sij Aggjhl -Type: PVSB 400/24-40 -Input: 400-500 VAC/50-60 Hz/2.2-1.8 A -Output: 24 V 40 A -Dimensions: 205/130/H130 mm -Weight: 3.1 kg

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Block, Transformer DS-Autotransformer type B 9403139 -Power: 7500 VA Lsdjh Hbw Tspfx Aggjhl -Technical data: see photo of the nameplate -Number: 10 transformers available -Price: per piece -Dimensions: 295/120/H280 mm -Weight: 31 kg/pc.

Condition: used, Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines Lodpjgnzykofx Aggohl -Forklift tines: 2 pieces/1 pair -Length: 1180 mm -Cross-section: 150 x 60 mm -Recording: see technical drawing in the photos -Transport dimensions: 1400/905/H185 mm -Weight: 264 kg

Condition: used, PLC control, electronic module, noise filter -Block .: B 0901031 -UR: 520 V 50-60 Hz 30 Aac Lhjdpfoflk Htox Aggel -Dimensions: 270/70/H95 mm -Weight: 1.7 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair Lhsdpfezg Ur Esx Aggel -Length: 1190 mm -Cross-section: 120 x 45 mm -Image: 410 mm (see sketch in the photos) -Transport dimensions: 1360/600/H125 mm -Weight: 146 kg

Condition: refurbished (used), Year of construction: 2013, Grinder LASKA WW-200 2013 year After technical inspectrion 3 months warranty for parts. All bearings, bushings and rollers new. Lhodpfx Aezy Hmnsggsl New cutting set Delivery time: ready

Condition: ready for operation (used), functionality: fully functional, Fatosa Frozen Meat Slicer, Frozen Blok Cutter Sold on behalf of a customer – functioning machine, sold as is, without warranty, no returns. Lsdezmp Rpspfx Aggohl

Condition: used, This listing is for a CFS Protemist DT II Automated Protein Synthesizer Abnova presents a new generation, fully automated robotic desktop protein synthesizer, Protemist® DT II, for high throughput eykaryotic protein production. The system is developed and manufactured by CellFree Sciences Co., Ltd. It synthesizes the protein of interest using a special wheat germ lysate and a bi-layer reaction. Protemist® DT II can run two scales of translational reaction, 1.2 ml (24 well) or 6 ml (6 well). Batch affinity purification is available for affinity tagged fusion protein synthesized in 6-ml (6 well) reaction scale. This is an expert system in transcription, translation, and purification. The protocol and automation is designed for easy operation obviating the need for manual handling and production. Specifications Dimensions: 79cm(h) x 50cm(d) x 70cm(w) Weight: 100 kg Power: 100~240 V 50/60 Hz Voltage Fluctuation Tolerance: ±10% Power Consumption: 350 VA Max. Number of Samples Per Run: 6 samples: transcription, translation and affinity purification (6 ml/sample) 24 samples: transcription, translation (1.2 ml/sample) Processing Volumes: 100 ul to 800 ul Reagent Unit: Temperature Control Method: Peltier moduleTemperature Setting: 4°C (Fixed) Dispensing Volume Variation: Within ±5%, CV < 1% (in dispensing 100 µl distilled water) Ambience for Installation: 15~30°C, humidity < 75%, dew condensation to be avoided Lhodsxzh Ucepfx Aggel

Condition: excellent (used), NH3 (ammonia) Ljdpfx Ageiimu Ijgohl net belt width 600 mm spiral belt with 19 tiers 150 kW product height: ± 55 mm Belt length 290 m with belt washing systems

Condition: like new (used), Gea CFS Koppens Thermal oil fryer BR 3500/600 Ljdpfjkvni Aex Aggehl Suitable for thermal oil heating; Net belt length: 3.500 mm Net belt width: 600 mm Machine dimensions (LxWxH): 6.000x900x1.600 mm Machine weight: 750 kg. Capacity: 250 kg/h in 600 liter oil

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, The GEA MultiFormer 400 is the ideal solution for companies seeking to diversify their food products. It can form products in a variety of shapes, such as rectangular, round, triangular or three-dimensional, suitable for a variety of foods: meat, vegetables, fish and vegetarian products. Thanks to a quick-change mold system, this machine is versatile and meets the needs of mass production. Its 2500 kg/h capacity ensures high output for intensive production lines. What's more, its design facilitates cleaning and reduces downtime, saving considerable time. The MultiFormer's user interface, featuring a GEA touchscreen, is extremely easy to control. Each recipe stores essential parameters, guaranteeing consistent quality and reducing the need for manual adjustments. This machine also includes options such as a paper interleaver, perfect for preparing ready-to-pack products. Lhsdou E I D Hopfx Aggol The patented GEA Vario Seal system reduces waste and improves efficiency, as it virtually eliminates product loss. What's more, thanks to its modular structure, the MultiFormer easily integrates additional forming accessories. These features enhance its adaptability, making this corrugator an essential tool for companies wishing to innovate in the creation of diverse products. Technical specifications: Production capacity: up to 2500 kg/h Machine dimensions: configurable to suit requirements Interface: GEA touch screen Modular forming system Energy consumption: optimized to reduce costs

Condition: good (used), Block DTT 10000 Transformer Manufacturer: Block Type: DTT 10000 10000 VA 50-60 Hz Switching Rating: Dyn 5 Code: 9129 IP: 23 Lhsdsxl Tbvspfx Aggol Primary: 500 V 12 A Secondary: 399/231 V 380/220 V 361/209 V 15.15 A HxWxD: 580 x 700 x 430 mm Weight: approx. 170 kg Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: Lsdszka Rujpfx Aggjhl temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-25 concrete block making machine is an excellent solution for plants producing concrete blocks, bricks, paving stones, and bims, offering high efficiency and flexible production capabilities. Developed in line with modern production concepts, this machine can easily produce various products such as paving stones, curb stones, and hollow blocks using different molds thanks to its single-layer structure. Thanks to its scalable facility structure, investors can quickly and economically increase their production capacity according to their needs. The BS-25's fully automatic PLC control system allows a single operator to manage the entire production process. The touchscreen LCD control panel offers the ability to monitor and print production data in real time with its user-friendly interface and advanced reporting system. With its remote access feature, the system can be controlled via LAN or internet connection, allowing for easy detection of potential malfunctions and remote software updates. This smart automation technology ensures consistent quality and maximum production in every shift. BS-25 - Concrete Block Machine Technical Specifications Production Capacity: 110–120 pallets/hour Pallet Size: 1,200 x 980 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.5 m³ Hydraulic Oil Capacity: 500 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Production Capacity in 8 Hours: 10,000 concrete blocks / 25,000 interlock blocks Why Should You Choose the BS-25 Concrete Block Machine? CONSTMACH stands out in the production of concrete block, brick, and paving stone making machines with its reliability, engineering quality, and after-sales support. The BS-25 model reduces your production costs while increasing your capacity with its energy-efficient design, long-lasting components, and smart control system. Each machine is delivered after passing quality control tests and can be customized upon request. For investors seeking high durability, minimal maintenance requirements, and world-class production performance, the BS-25 is a symbol of long-term profitability and reliability. What Do We Do at Constmach? Lhsdjxp Uurspfx Aggsl Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-20 concrete block machine is a fully automatic block production facility equipped with modern production technologies and a hydraulic system. Thanks to its PLC-controlled structure, it produces with high precision without the need for operator intervention. Operating at a pressure of 100-160 bar, the system has the capacity to produce 20 interlocks and 8 20x40x20 blocks per press. Furthermore, it minimizes labor requirements thanks to a collection robot that automatically stacks and packages dried products. The BS-20 offers an environmentally friendly production approach with its A+ energy-efficient motor system, EFF3 class electric motors, and low energy consumption. It meets European quality standards with its ISO 9001:2008 quality management system, CE certificate, and DIN-TSEK compliant structure. It provides a user-friendly experience with its automatic/manual switching system that increases operational flexibility, remote fault detection via the internet, and forklift-compatible design. BS-20 Concrete Block Machine Technical Specifications Production Capacity: 100–110 pallets per hour Pallet Size: 1,000 x 920 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.2 m³ Lsdpoxp Uwyjfx Aggshl Hydraulic Oil Capacity: 400 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Product Height (max): 3,000 mm Product Length (max): 600 mm Machine Chassis: 10 mm Production in 8 Hours: 8,000 blocks / 18,000 interlocks Why Should You Choose the Constmach BS-20 Concrete Block Making Machine? The BS-20 Concrete Block Machine offers high efficiency, low operating costs, and long-lasting use for medium-sized businesses. Manufactured with the assurance of CONSTMACH engineering, this system delivers uninterrupted production performance thanks to its automation capabilities and robust construction. With spare parts warranty, fast service network, and 24/7 technical support, CONSTMACH ensures your investment operates reliably for many years. Therefore, by choosing the BS-20 model, you can maximize both your production quality and operational efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), functionality: fully functional, Slicer line CFS type UniSlicer with MC control, fully stainless steel, including: - CFS Check DC 2000 MK3 (scale) - CFS Horizontal Distributor - CFS discharge conveyor ATB 3100 MM - Accessories & documentation - Several spare parts Machine entirely made of stainless steel. Lhjdpfjyk D Hbsx Aggjl

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Complete Slicing & packing line from CFS & Variovac! CFS-Uni slicer whit check controller / Scale year of construction 2006 updated firmware whit touch display. Ljdpexmh Rbefx Aggehl Variovac Multipower year of construction 2008 built in vacuum pump + booster pump foil wide 542 mm, Rejection 430 mm, MAP machine, ELS Labeling system! Very nice and well maintained line ready to work!

Condition: excellent (used), Complete slicing & packing line from CFS & Variovac consisting of 1x CFS Uni slicer whit scale and outfield conveyor, 1x Variovac Primus thermoformer whit 2x tools No 1. 1:2 277 x 177 mm Maximum deep 110 mm made for Swedish Wallet packets. No 2. 1:3 202 x 111 mm Maximum deep 110 mm. The line is fully complete and there is a knife sharpener including for the slicer. Convenience Food Systems automatic slicer line, consisting of: type: UNI-SLICER, number: 450.2251, year of construction: 2004, plastic belt, belt width: 230 mm, clearance: 260 mm x 140 mm, diameter knife: 420 mm, slicer dimensions: 2550 mm x 880 mm x 2170 mm. Dividing belt, wire belt, belt width: 270 mm, dimensions: 850 mm x 610 mm x 1110 mm. Check weigher, type: CW2000MK3 091.1992, year of construction: 2004, plastic belt, belt width: 275 mm, dimensions: 700 mm x 780 mm x 1100 mm. Outfeed belt, type: ATB 791 991.1994, plastic belt, belt width: 400 mm, dimensions: 3030 mm x 900 mm x 1260 mm. Knife sharpener, Lhedpfx Ajxl Tzijggsl

Condition: excellent (used), Year of construction: 2004, Used CFS FRESHGRIND 200 grinder for sale. Equipped with a loading device. Please let me know if you are interested. Ledozmwk Repfx Aggohl