Used Comandulli Comandulli Omega 60 Sx for sale (22,175)

Condition: excellent (used), Year of construction: 2019, Refrigeration dryer OMEGA Kdsdpfxow Ipabs Ag Ust Capacity 9.5 m3/min year of manufacture 2019 THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,154 h, load capacity: 4,500 kg, lifting height: 5,980 mm, free lift: 1,870 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 2,000 mm, tire condition: 25 %, front tire type: superelastic tires (black), front tire size: 355/50-15, rear tire type: superelastic tires (black), rear tire size: 21x8-9, overall weight: 7,082 kg, total height: 2,800 mm, total length: 2,950 mm, total width: 1,400 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-45 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 4.500 kg Lifting height: 5.980 mm Closed height: 2.800 mm Free lift: 1.870 mm Mast: Triplex (3F598) Fork length: 2.000 mm Fork carriage: 3 A Drive: Elektro 80V Battery: 80 V/930 Ah (2015) Charger: 80 V - not tested Tyres: Superelastik SE 355/50-15 (25%) / 21x8-9 (15%) Service weight: 7.082 kg Length: 2.950 mm Kodpfxsz Aqirj Ag Uodt Width: 1.400 mm Year of manufacture: 2010 Operating hours: 15.154 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Internal no.: 1309115 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: CON.07.10.0154, compressed air connection: 8 bar, input voltage: 230 V, total width: 1,329 mm, total length: 1,150 mm, total height: 1,725 mm, overall weight: 812 kg, pneumatic connection: 8 bar, Equipment: documentation/manual, 6-color pad printing machine from the manufacturer TAMPOPRINT, model Concentra 60-6 Max. printing area diameter (circle diameter) 55mm, total of 6 colors Year of manufacture 2010, weight 812 kg Air consumption 48 standard liters per cycle Good overall condition, machine fully functional, minimal air loss on one of the main valves. Visual condition as shown in the current photos. Scope of supply: TAMPOPRINT Concentra 60-6 as a stand model + Foot pedal + Hand crank for height adjustment of the tilting table + 6 used ink pots 60mm + 6 used printing rings (for the ink pots) + 2 used mounting tables (for ink pot and cliché mounting) + 2 used gripper tongs (for ink pot and cliché mounting) + 2 used pad coupling devices plus mounting screws (4 pad coupling devices still need to be purchased) + 1 heavy-duty hook for transporting the machine + Documentation (operating manual, parts list, wiring diagram) Option 1 6 additional used ink pots 60mm, EUR 420,- excl. VAT. Option 2 4 pad coupling devices (new) from the manufacturer, EUR 1,098,- Packaging: The machine can only be packaged by wrapping it completely in cardboard and bubble wrap; it will not be placed on a pallet. The pad printing machine can be inspected and tested in Pottendorf by appointment. Delivery: Ex works Pottendorf (Austria). For collection, only trucks with a tail lift are permitted; please note the machine's weight. The transport of this machine is at the buyer's expense and risk. Packaging costs EUR 120,- Kedpozwv Rwefx Ag Ujdt Selling price EUR 18,200,- excl. VAT. New price approx. EUR 70,000,-

Year of construction: 1998, operating hours: 1,776 h, condition: used, functionality: fully functional, machine/vehicle number: 37, - Motor 35 kW / Maximum screw speed 72 rpm - 2-part, smooth cylinder Kodozmurrspfx Ag Ujdt - 5 cylinder heating zones - 1 flange heating zone - 2 tool heating zones - KS 40 controller - Measurement of melt pressure and melt temperature - 3-zone screw - Tool connection IDE M100x3 - From a single owner, in very good condition, only 1,776 operating hours, used solely in a pilot plant.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 15,004 h, load capacity: 5,000 kg, lifting height: 3,050 mm, fuel type: electric, mast type: telescopic, construction height: 2,320 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 2,000 mm, tire condition: 10 %, front tire type: superelastic tires (black), front tire size: 355/50 - 15, rear tire type: superelastic tires (black), rear tire size: 21 x 8 - 9, overall weight: 7,450 kg, total height: 2,320 mm, total length: 3,100 mm, total width: 1,400 mm, fuel: electricity, Equipment: cabin, sideshift, STILL RX 60-50 / 600 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 5.000 kg Lifting height: 3.050 mm Closed height: 2.320 mm Mast: Standard (2W305) Fork length: 2.000 mm Fork carriage: 3A Drive: Elektro 80V Battery: 80 V/ 930 Ah (2016) Charger: 80 V - not tested Tyres: Superelastik SE 355/50 - 15 (10%) / 21 x 8 - 9 (0%) Ksdpfx Aez Aqh Uog Uedt Service weight: 7.450 kg Length: 3.100 mm Width: 1.400 mm Year of manufacture: 2013 Operating hours: 15.004 h Condition: ready to drive EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Full cabin ATTACHMENTS Sideshift, Fork positioner Internal no.: 1309204 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 4514927-4514928, Printed manuals are available both for the SLAU 80-60 shrink wrapper and the TR 65-150 shrink tunnel. Automatic “L” sealer packaging machine, brand ULMA, model SLAU, equipped with a shrink tunnel, designed for packaging all types of products using either shrink film or non-shrink film, reaching outputs of up to 45 cycles/min. Highly versatile machine: its simple adjustment systems allow for rapid adaptation to different products to be packaged. Produces seamless packages on both the top and bottom of the product, ensuring high product visibility, whether shrink wrapping is applied or not. The SLAU was specifically designed to facilitate frequent size/format changes, and therefore features systems that enable all changes to be carried out easily and quickly, with no need for additional tools. Automatic in-line feeding via conveyor belt, featuring product separation and alignment, as well as manual belt width adjustment. Motorized 90° film reel holder, with mechanical perforation system and end-of-film detection. Manually adjustable former triangle height. Horizontal and vertical photocells for product detection. Three film sealing and cutting options: STD: by nichrome wire, OPC: knife or hot bar for PE films. The latter two feature electronic temperature control. Jaw opening adjustment by pneumatic actuator in three positions, increasing output with low-profile products. Sealing die equipped with safety end-pieces to prevent products from getting stuck should obstacles be encountered along the path. Belt closure system facilitates the transfer of small and/or unstable products. Sealing center alignment via jaw height adjustment. Kdodeykqhfspfx Ag Uot Easy-access automatic film waste rewinder with film break detector. Function and parameter control and adjustment via programmable PC. Sturdy frame built from painted welded steel tubing. Fitted with wheels and adjustable feet for transport and positioning. Right-to-left machine version. Easy integration into existing production lines. Full accessibility to all components. Ventilated electrical cabinet. Guards and safety systems compliant with CE regulations. Available in both painted and stainless steel versions. --- ULMA TR 65-150 hot air tunnel, designed for film shrink-wrapping of products discharged from side-seal wrappers, bundlers, flow packers, overlap, and other types of packaging machines. High thermal efficiency tunnel, low consumption, and minimal heat loss. Robust frame built from painted rolled steel. Easily integrated into existing production lines. Fitted with wheels and adjustable-height feet. Right-to-left working direction. Electronic adjustment of temperature and conveyor speed. Homogeneous distribution system of hot air flow inside the chamber to ensure significant energy savings. Maximum insulation minimizes heat loss.

Condition: defective spare-parts repository (used), Year of construction: 1990, functionality: not functional, turning length: 600 mm, turning diameter: 300 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 670 mm, spindle motor power: 11 W, rotational speed (min.): 3,500 rpm, total length: 2,620 mm, total width: 1,480 mm, overall weight: 4,000 kg, bar passage: 65 mm, spindle nose: MT-NO.7, Equipment: documentation/manual, DAINICHI F25 CNC turning center, manufactured in Japan. A robust and reliable CNC lathe suitable for precision turning and general production applications. The machine features a rigid construction, hydraulic chucking, and automatic tool changing, making it suitable for both small and medium production runs. The machine is available for inspection and can be demonstrated upon request. TECHNICAL SPECIFICATIONS CNC control: FANUC CNC turning center Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 600 mm Swing over bed: approx. 500 mm Spindle bore: approx. 65–77 mm* Spindle speed: up to approx. 3,000–3,500 rpm* Turret: automatic turret, 10 stations* Hydraulic chuck Hydraulic tailstock Coolant system Chip conveyor *Specifications to be confirmed according to the individual machine configuration. ADVANTAGES DAINICHI, Japanese machine construction Robust and rigid CNC turning center FANUC CNC control Hydraulic chuck and tailstock Suitable for general turning and production work Machine available for inspection Immediate availability < < < THE MACHINE HAS A FAULT ON THE REGULATOR AND IT IS NOT FUNCTIONAL. IT CAN BE REPAIRED OR USED FOR SPARE PARTS. > > > IT HAS AN ALMOST NEW 3-JAW CHUCK. Kjdpfxjzwdqrs Ag Uodt

Condition: used, Year of construction: 2001, functionality: fully functional, Straight Down Punching Machine, EME brand, 60 KVA, 380V, Single-phase, Used. Kdsdpfxozhuctj Ag Uet

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, operating hours: 50,000 h, Equipment: CE marking, documentation/manual, Trumpf TruBend V200 bending cell + BendMaster 60 Kedpfx Agozrxfas Usdt Year of manufacture: 2004 Maximum pressing force: 2000 kN Maximum stroke: 365 mm Maximum operating pressure: 340 bar 1 unit B0401A0009 = BendMaster 60 1 unit B0106A0073 = TRB V200-6A 1 unit protective enclosure including lighting 1 unit BendMaster track, 14 meters in 2-meter segments 1 unit Trumpf system control

Condition: used, Rip saw - Saw for lengthening boards. Kdjdstq Eblepfx Ag Uot - Manufacturer: omega T55 300 - Year: 1996 - Electric motor - Frequency counter

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, DOOR PRODUCTION LINE CMS PRO EVOLUTION TWIN 60 Year 2011 Kodpfxjzr H Tfe Ag Usdt This machine has a very low number of working hours, wrong investment by client . The machine is connected and can be inspected in Poland at any time after agreement. For all technical information please click below on included PDF document .

Condition: excellent (used), Year of construction: 2021, Grader Make: Marel Model: CG600 Compact Grader Ksdozzq Ifjpfx Ag Uodt 2021 6 Station Little use.

Year of construction: 2025, operating hours: 255 h, condition: like new (used), functionality: fully functional, We are offering for sale a large-format, 5-axis CNC waterjet cutting machine, PTV WJ4080. The machine was manufactured in 2025, has only approximately 255 operating hours, and is in new condition (like new/demonstration machine). Regular service and maintenance have been performed exclusively by authorized technicians from the manufacturer, PTV. The machine is equipped with superior optional features for maximum precision (5-axis cutting head with bevel compensation) and gentle cutting of brittle materials. The machine is connected and ready for a demonstration. Technical specifications: • Manufacturer: PTV s.r.o. (Czech Republic) • Model: WJ4080-1Z-UJ-PJ-5AX (60°) • Year of manufacture: 2025 • Serial number: 70-1457 • Machine condition: Like new (as new, minimally used) • Operating hours: approx. 255 hours • Working dimensions: 4,000 x 8,000 mm x +-180 mm • Enclosure protection class: IP54 • Electrical parameters and connection: • Voltage system: TN-C-S, 3+N+PE-400/230 V AC • Network frequency: 50 Hz • Infeed fuse: 25 A • Installed power: 5.5 kW • Power factor COS φ: 0.85 • Control circuit voltage: 24 V DC • Maximum short-circuit current of busbars: 10 kA Kjdpfxszg Dgxs Ag Uedt Key features and technologies: • 5-axis cutting head (60°) with Progress Jet function: A system for active bevel elimination, which ensures a perfectly perpendicular cut and maximum dimensional accuracy, even at high speeds. • Gentle Piercing function: Controlled piercing with a smooth increase in cutting pressure. Ideal for brittle materials (glass, tiles, ceramics, stone, composites), where it completely prevents cracking or delamination of the material. • PTV JETS 3.8/60 Classic high-pressure pump: - Equipped with a frequency converter (dampens shocks, saves electrical energy, and extends the life of high-pressure components). - Integrated auxiliary pump for compensating low pressure in the supply water. • ARSA automatic sludge removal: Continuous mechanical cleaning of the tank/collector from used abrasive + integrated vacuum tube for easy manual cleaning. • Abrasive handling system: Pressurized abrasive feed unit PDA 1500. Bonus to the offer: We will provide 4 tons of high-quality abrasive free of charge with the machine, which allows the new owner to immediately start production without additional initial investment. The machine is fully functional, connected, and can be viewed and tested by prior arrangement. If you have any questions, need further information, or are interested in viewing the machine, please do not hesitate to send us a message or contact us by phone. We will get back to you promptly.

Condition: excellent (used), Year of construction: 2022, Available immediately. Behringer LPS 60 TA, manufactured in 2022, in excellent condition. This is a very special band saw; it operates fully automatically! - Auto feed control with cut monitoring - Saw band drive 5.5 KW - 10-120 M/min - 54 mm band - Clamping device for saw sections - Line laser Advantages of the LPS-TA table band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long band life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force transmission of the saw feed is located directly below the cutting point. Advantages in material procurement By producing flat materials from large sheets, efficiency gains can be achieved in both storage and the purchase of raw materials. Clamping device for layered cuts (option) For sawing larger batch sizes, sheets can be stacked in layers and securely held in place using the optional vertical additional clamping device. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large-sized chip conveyor with an integrated coolant tank. Chips and coolant are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be extended out of the machine frame. Powered duplex chip brushes effectively clean the saw band, thereby increasing tool life. The brushes are automatically adjusted to the saw band and ensure consistent cleaning performance. Automatic feed device Through the combination of an NC-controlled feed device and intelligent control, sheets can be separated into strips fully automatically. Servo feed system The use of the Behringer servo feed system creates a constant chip removal rate and utilizes the performance of modern saw bands more effectively. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloading and premature wear of the saw bands. Quick saw band change ensures the shortest possible setup times. In just two to three steps, the saw band can be moved to the change position. Band-guiding parts made of gray cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thereby increasing tool life. Compact Due to its compact dimensions, the table band saw can be installed even in confined spaces. Kdjdpfszubxhsx Ag Uet Movable material support table For easy loading and unloading by crane, the material table can be extended out from under the saw unit.

Year of construction: 2004, condition: good (used), functionality: fully functional, Wrapping machine Manufacturer: Böhl Kedpoznczdsfx Ag Uodt Type: BSB-45 SX-2 Year of manufacture: 2004 Total power consumption: 2.5 kW Product dimensions: Width: 5-250 mm Height: 5-250 mm Length: 600-6000 mm Machine weight: 950 kg Includes roller tables: 2 x 4 m

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, production capacity: 6,000 unit/h, The machine is operating flawlessly and has been under continuous Quadient maintenance. The latest service report from December 2025 is attached! TECHNICAL DETAILS Processing speed max.: 6,000 items/hour Document speed max.: 6,000 documents/hour Monthly volume max.: 300,000 filled envelopes/month Package thickness max.: 10 mm Package thickness for minimum clearance: less than 3 mm Minimum clearance in the depth direction with package thickness less than 3 mm: 6 mm Minimum clearance in the width direction with package thickness less than 3 mm: 16 mm Package thickness for increased clearance: 3–6 mm Minimum clearance in the depth direction with package thickness 3–6 mm: 12 mm Minimum clearance in the width direction with package thickness 3–6 mm: 19 mm Envelope hopper capacity up to C5 max.: 800 pieces Envelope hopper capacity C4 max.: 500 pieces Envelope weight up to C5 min.: 70 g/m² Envelope weight above C5 min.: 90 g/m² Envelope weight max.: 110 g/m² Refilling possible during operation Envelope width min.: 225.5 mm Envelope width max.: 330 mm Envelope depth min.: 98.5 mm Envelope depth max.: 254 mm Flap length min.: 32 mm Flap length max.: 65 mm Envelope neck depth min.: 10 mm Envelope neck depth max.: 25 mm Minimum opening in the neck area: 70 mm Flap shoulder angle: 50–90° Neck angle: 5–20° MACHINE DETAILS Counter reading: 3,617,695 Voltage: 230 V AC Frequency: 50 Hz Fuse for envelope inserting head: 6.3 A Operating temperature: 18–28 °C Relative humidity: 30–80 % EQUIPMENT Tower feeder with 2 stations CIS reading Datamatrix reading Inserter for inserts up to A4 Enveloping module Output conveyor Conversion with C4 float switch Gluing possible with distilled water Kdedpfx Agezzqabo Uet Matching base cabinet

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 6 ft, color: grey-black, overall weight: 2,500 kg, maximum load weight: 5,000 kg, loading space width: 4,876 mm, loading space length: 6,058 mm, loading space height: 285 mm, Equipment: cooling unit, Double Office Container / Living Container / Welfare Container Price: 13,500 Euros net Description: OMEGA CONTAINERS has been active in the market since January 2017. We specialize in the complex production of office, welfare, living, and technical containers. We offer professional services ranging from planning and production to transport and installation. OMEGA containers are built on a solid steel frame, which allows the modules to be transported or moved with a crane without risk of damage. It is possible to transport the container multiple times. If required, we also build containers with structural calculations and specified documentation, as well as technical planning. The specific standard dimensions of our container: Length: 6058 mm Width: 4876 mm External height: 2850 mm Internal height: 2500 mm We also manufacture custom containers that are perfectly adapted to the customer's requirements. Steel construction: It consists of 3 mm thick open steel profiles with 5 mm thick sheet metal reinforcements. The surface is coated with an epoxy primer and painted with polyurethane paint. Color selection based on RAL color palettes. Kdedpfxozb D Rbs Ag Ust Roof: It is a steel structure with sandwich panels filled with 100 mm thick PUR foam polyurethane foam. The roof sealing consists of 1 mm thick galvanized sheet metal over the entire surface. Walls: Made of sandwich panel with 100 mm PUR foam polyurethane foam. The exterior facade is made of sheet metal in silver, white, or graphite. The interior facade is made of sheet metal in white. Flooring: Made of tightly welded steel profiles. The sealing consists of trapezoidal sheet metal t-14. Insulation made of 100 mm pressed wool. Floor 25 mm OSB. Finished with an industrial PVC lining with increased abrasion resistance + cover sheet. Fittings: - 1 piece - 900mm x 2000mm sheet metal door, in white or anthracite. - 3 pieces - Window 1200mm x 1200mm tilt-and-turn window - 3 pieces – External roller shutter Electrical installation: 2x electrical distribution boxes - residual current circuit breakers + fuses residual current + fuses 2x electrical connection 32A 5P 2x external plug 32A 5P 4x LED lamp (2x36W) 6x double socket 2x electric heater 2kW Additional options: - It is possible to equip the container with a toilet, a shower, a sink, including water connection, heating, etc. - Installation of several windows in various sizes. - Installation of glass doors - Installation of roller shutters. - Installation of air conditioning systems with room heating - Partitioning of containers into rooms - Connection of several containers to form a single unit. We cordially invite you to contact us!

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, Tool changer with 60 positions Spindle speed 12,000 rpm Heidenhain iTNC 530 control unit Kdedezva Uwopfx Ag Ujt Internal coolant supply (ICS) Chip conveyor 3D quickset

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 17370, functionality: fully functional, TIGER 352 SX EVO - SEMI-AUTOMATIC Kdjdpfey T Eh Tex Ag Uet HIGH-CAPACITY > The robust cast iron frame absorbs vibrations and ensures consistent cutting quality as well as a longer service life for the saw blade. > The two-stage gearbox ensures high cutting performance and rigidity. > The pneumatic vertical vice ensures efficient and secure clamping, even when cutting pipes. > The control panel, equipped with a thermal relay and minimum voltage coil, guarantees the highest level of protection. In combination with an automatic pusher stop and label printing, the machine is the optimal solution for sawing your reinforcing steel in PVC window construction. The machine is still in use until June. It can be inspected at the customer's site in 49811.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 39 cm³, injection weight: 36 g, mold height (min.): 200 mm, power: 10.2 kW (13.87 HP), Year of manufacture: 2003 Clamping force: 25 tons Distance between columns: 270 x 270 mm Screw diameter: 25 mm Injection volume: 39 ccm Injection weight: 36 g for PS Equipment: Conveyor belt, sprue picker, core pull, Euromap Fully inspected! PRICE REDUCED FROM 6500 TO 4950 EUR!!! Kdjdpsxgiaqsfx Ag Uet

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,360 h, load capacity: 3,000 kg, lifting height: 5,380 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,460 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 250/60 - 12, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 5,491 kg, total height: 2,460 mm, total length: 2,500 mm, total width: 1,350 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-30 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 5.380 mm Closed height: 2.460 mm Kdodpfx Ajz Aqhzsg Uot Free lift: 1.800 mm Mast: Triplex (3F538) Fork length: 1.200 mm Fork carriage: FEM 3A Drive: Elektro 80V Battery: 80V 620Ah v. 2024 Charger: Dreiphasig 80V 100A not tested Tyres: Superelastik SE 250/60 - 12 (40%) / 18 x 7 - 8 (10%) Service weight: 5.491 kg Length: 2.500 mm Width: 1.350 mm Year of manufacture: 2015 Operating hours: 6.360 h Condition: ready to drive EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309278 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034612, Technical characteristics: Core Specifications Bar Diameter (Round): 6 mm – 50 mm Bar Diameter (Hexagonal): 6 mm – 45 mm Bar Diameter (Square): 6 mm – 37 mm Bar Length Options: 1200 mm – 3200 mm Maximum Feed Speed: 30 m/min Maximum Remnant Length: 300 mm Required Air Pressure: 6.5 – 7.5 bar Operating Voltage: 230V / 50 Hz Weight: 1200 kg Design & Features Guide Channel: Manually interchangeable, made of Vulkollan-type plastic, suitable for high-speed bar rotation. Front Steady Block: Interchangeable every 5 mm for optimal bar support. Remnant Management: Rear extraction via self-centering extractor or front ejection available. Repositioning System: An optional rail system enables axial or radial displacement up to 600 mm for lathe servicing. Automation: Fully PLC-controlled, equipped with a brushless motor and digital pneumatic valves for speed and thrust control. Bar Storage: Single-level magazine with a 235 mm loading capacity. Bar Feeder: TOP Automazione Model FU 352 SX SEMI-AUTOMATIC BAR FEEDER FOR HORIZONTAL LOADING TO LATHE (AUTONOMY DEPENDS ON BAR DIAMETER) Dimensions Kedjxx Sfaepfx Ag Ujdt Bar Feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: DIGITAL HMI CONTROLLER FOR MANUAL OPERATIONS Machine Status: OPERATING

Condition: good (used), Year of construction: 2015, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or any errors. Kodpfx Agjz A T E Ho Ujdt This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: excellent (used), Year of construction: 2012, operating hours: 20,101 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 70 kVA, controller manufacturer: Siemens, controller model: 3D-Control Siemens 840D, workpiece height (max.): 525 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 240 kg, total height: 2,800 mm, total length: 4,700 mm, total width: 6,000 mm, table load: 240 kg, rotary table diameter: 500 mm, overall weight: 12,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 20,101 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 300 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 500 Z-axis travel mm: 500 C-axis degrees: 360º (0,001) Kdodpfx Aezd Agrsg Uot B-axis degrees: -5 / +110º Distance spindle nose - table surface mm: 600 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: 500x525 Max. workpiece weight kg: 240 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Max tool weight kg: 6 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Mist collector Programmable coolant nozzles DXF import function Internal coolant supply Electrical cabinet active cooling unit Temperature compensation Paper band filter DMG AUTOshutdown DMG GREENmode DMG MACHINEcheck High-Speedd-Setting DMG Netservice-client DMG Service Agent Machine running times Under power: 35687 Spindle Working: 20101 Rated power kVA: 70 Basic machine dimensions / weight Length mm: 4700 Width mm: 6000 Height mm: 2800 Weight kg: 12000

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total width: 9,500 mm, total length: 29,325 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Lisec jumbo cutting line for float and laminated glass, year 2008, consisting of following: LBR-60/30, 2-part, 1x650, 1x360 and 17x180 mm glass storage multi-rack ATF-60/30, moveable glass loader to pick up sheets from the glass storage multi-rack GFB-60/30RE-S, float glass cutting table Kdsdpszxgt Sjfx Ag Uet VB-60 + roller transport field, laminatd glass cutting table for maximum cutting length of 6000 mm LKT-21/33, air cushion transport field LKT-21/33, air cushion transport field with glass turning support LKT-21/33, air cushion transport field BHK-50/33, break out table with tilting function CE-safety fences The cutting line is in very good condition and is available immediately from current place within EU.