Used Elte Pe4 Engine for sale (21,846)

Condition: new, Roller diameter: 140 mm Roller width: 50 mm Bore diameter: 35 mm Keyway: 10 mm Laodpfx Aeyucufob Njh Price per piece: 37 EUR

Condition: new, Equipment: CE marking, 2 deck screener, including a built-in RPM meter of the screen box and aluminum wheel locking wedges. Possibility of delivery with petrol generator. Drawbar for easy transport for being towed by tractor or truck. The conveyor for fine fraction. Meshes mounted from 2mm to 100mm. Lodpoz Hyalsfx Ab Neah

Condition: new, pressing force: 30 t, stroke length: 300 mm, - Capacity: 30 tonnes - Cylinder stroke: 300 mm - Working width: 700 mm - Pressure gauge Laodpfx Abswd I Hts Neh - Emergency stop - 400 V

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so Lajdpfx Aoz Dmn Rob Noh

Condition: new, Equipment: CE marking, • Stationary drum screener • Double drum with replaceable screen on the outer diameter • Mesh sizes range from 2mm to 80mm, screen width 1260mm • Drum drive: electric, speed adjustable via frequency converter • Outer drum diameter: 1300mm • Inner drum diameter: 1000mm • Screening capacity: up to 30m³/h (depending on input material) Lsdpfx Aoz H Iv Uob Noah • Input feeding conveyor: electric drive, speed adjustable via frequency converter, hopper width (side of the machine): 1879mm • 2100 kg

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, Beavertail rear, Ramp Equipment: - Spare wheel - Shovel holder - Loading ramp Net: €5,621.85 / Gross: €6,690.00 Article number: VB4235401810.02 Technical data: • Brand: Variant • Model: 3518 B4 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 400 x 180 x 30 cm • External dimensions (L x W x H): 600 x 234 x 168 cm • Loading height of the floor: 30 cm • Permissible total weight: 3,500 kg • Tare weight: 815 kg • Payload: 2,685 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced aluminum diamond-plate fenders, walkable • Lateral grid steps, non-slip • Screen-printed plywood floor, 18 mm, non-slip and waterproof • Extremely stable, welded grid tube frame • Frame completely hot-dip galvanized • Steel loading ramp, upright on shaft, 130 cm • Stable eccentric locks • Support blocks on loading ramp • Very low chassis for a low loading angle • Beavertail rear / low loading for work platforms and excavators • Excavator bucket holder at the front • Spare wheel, mounted under the excavator bucket holder • 10x lashing eyes mounted in the outer frame (1000dAN/kg) • 8x lashing points on the inside • Parabolic axle from KNOTT • Parabolic axle for absolute heavy-duty use • Reverse automatic • KNOTT inertia brake and parking brake • Lockable tow hitch • Spare wheel, mounted under the excavator bucket holder • Very stable, bolted V-drawbar, REINFORCED • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear marker lights at the rear with rubber arm • Heavy-duty support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. Laedpfoyyw N Aex Ab Nsh - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: used, all stainless steel with top hold down belt water circulation net belt length 4.500 mm net belt width 600 mm adjustable speed sediment removal system Ledpoz Sqm Ijfx Ab Nsah lifting unit with electrical hoists dimensions (l x w x h) : ± 6.800 x 1.400 x 3.000 mm

Condition: ready for operation (used), Year of construction: 1991, A WT Wickeltechnik slitter rewinder is offered. Maximum web width: 1100mm, minimum slit width: 70mm, aluminum foil thickness range: 20µm-120µm, laminate thickness range: 20µm-300µm, maximum speed: 600m/min, maximum unwind roll diameter: 1300mm, maximum rewind roll diameter: 1000mm, maximum web tension: 1000N. An on-site inspection is possible. Laedpfxszrhhke Ab Noh

Condition: ready for operation (used), Year of construction: 2020, An optical 2D coordinate measuring machine Werth is available. Measuring range X/Y: 400mm/200mm, electrics: VDE 0113, magnification: 0.2x. Machine dimensions X/Y/Z: approx. 800mm/600mm/1200mm, weight: approx. 200kg. Including two computers, software, and one replacement glass pane. Documentation available. An inspection on site is possible. Lajdpfjyxq U Asx Ab Nsh

Condition: ready for operation (used), Year of construction: 2018, stroke length: 160 mm, table width: 4,325 mm, total height: 2,630 mm, overall weight: 33,000 kg, product length (max.): 2,750 mm, Mechanical stamping press manufactured in 2018. This PME PE 400-1700 C features a nominal pressing force of 4000 kN and a machine weight of 33,000 kg. It has a maximum ram adjustment of 180 mm and can accommodate tool dimensions of up to 1100 x 800 mm. If you are looking to get high-quality stamping capabilities, consider the PME PE 400-1700 C machine we have for sale. Contact us for further details. - Total Power: 50 kW- Voltage: 400 V- Frequency: 50 Hz- Basic Machine Position: Top Dead Center (O.T.)- Max. Engagements in Single Stroke: 15 /min- Max. Permissible Speed of Flywheel: 290 1/min- Max. Ram Adjustment: 180 mm- Stroke Height Min./Max.: 30 mm / 160 mm- Stroke Rate Min./Max.: 10 /min / 60 /min- Max. Shut Height : 660 mm- Max. Tool Dimensions (L x W): 1100 x 800 mm- Upper Tool Weight: 2400 kg- Lower Tool Weight: 2400 kg- Pneumatic System Pressure Min./Max.: 3.5 / 10 bar- Pneumatic Clutch-Brake Combination Pressure Min./Max.: 3.5 / 6 bar- Lubrication System Power: 1.0 kW- Lubrication Operating Pressure: 50 bar Technical Specification Laodj Adp E Sspfx Ab Neh Stamping Force 4000 Kn

Year of construction: 2018, condition: ready for operation (used), Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation. Ljdpfxeihp Ipj Ab Njah

Condition: new, Year of construction: 2022, Electric furnace MELTEC Typ ZC20/120F ECO V2 incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: Ledpjy E Tybefx Ab Njah - Good accessibility for cleaning purposes via flexibly mountable flap cover - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Crucible content: 420,0 kg/Zn Melting capacity: 120,0 kg/Zn/h Electrical connection: 21,5 kW Type: ZC 20/120 F ECO V2 suitable for DAW 20F and W20Zn

Condition: new, Year of construction: 2023, Electric furnace MELTEC Typ ZC80/180F ECO V2 incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) Lodpoy E Tyhsfx Ab Nsah The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: - Good accessibility for cleaning purposes via flexibly mountable flap cover - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 80/180 F ECO V2 suitable for DAW 80F and W80Zn

Condition: new, rotational speed (max.): 1,600 rpm, rotational speed (min.): 75 rpm, – MK4 – 75/1600 rpm – Right- and left-hand rotation – Thread cutting function – Height-adjustable drilling unit Lodpfx Aboy Rx Die Neah – Swiveling drilling unit – Gear drive – Safety cover – Emergency stop – Documentation – 400V

Year of construction: 2026, condition: new, functionality: fully functional, Bucket Screen buckets for screening all loose materials. 8mm and 16mm sizes of screened fractions, both of which are already included in the price of the bucket. HARDOX as standard on the most used parts of the bucket. ANTISTICK the non-stick surface of part of the bucket, for faster and easier work. Lasdpfxsv D Hb Do Ab Noh Various sizes, 2,3,4,5 or 6 shaft buckets

Condition: used, Year of construction: 2014, functionality: fully functional, Single-shaft machine. Dimensions of the feed hopper: 1300 x 1400 mm. Hydraulic pusher with adjustable pressure and speed, depending on the power consumption of the rotating drum. Drive via gear motor with V-belt. Robust rotor made of certified construction steel. Rotor width: 1300 mm. Hopper length: 1400 mm. Rotor diameter: 368 mm. Main motor power: 30 kW. Teeth and counter-blades made from wear-resistant material. Replaceable reversible blades. Ledpfxsx Anq Hj Ab Noah Dimensions of reversible blades: 40x40x20 mm. Replaceable screen basket. Total weight: approx. 3,100 kg. Supply voltage: 380 V – 50 Hz.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension +100km/h, ramp, aluminum floor Equipment: - Aluminum floor - Loading flap - 10x lashing eyes - Loading angle 20° Net: €7,703.36 / Gross: €9,167.00 Article number: ILF335401791.12 Ljdozu N Nzopfx Ab Njah Technical data: • Brand: Hapert Trailers • Model: Indigo LF-3 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 405 x 179 x 19 cm • External dimensions (LxWxH): 589 x 238 x 145 cm • Loading height of the floor: 42 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,101 kg • Payload: 2,399 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic • 100km/h approval: Yes DESCRIPTION • 3x parabolic spring axles, each 1,800kg • Robust steel fenders, walkable • 4x HAPERT Safety Steps (non-slip surface) • Grid grating step plates on the rear side • Aluminum profile floor • Very stable steel frame, welded • Frame completely hot-dip galvanized • 1x continuous loading flap in 150cm length mounted on a shaft, instead of a 120cm ramp • Length of loading flap: 150cm • Loading angle: 13° • Stable eccentric locks • Corner posts with locks for the rear flap, can be removed without tools • Option to insert at all 4 corners for tarpaulin frames, grating extensions, side extensions or front wall extensions • Robust support feet on the loading flap • Lifting aid for the loading flap • Very low chassis for a low loading angle • Optionally with bucket storage • 10x lashing eyes recessed in the side of the frame profile (1000dAN/kg), TÜV certified • Hole railing three-sided 6cm (Combi Protect Rail), can also be used with locking bars and lashing straps - round holes 25mm, oblong holes 54x25mm • Parabolic spring axle from KNOTT • Reverse driving automatic • KNOTT overrun device and parking brake • Very stable bolted V-drawbar, REINFORCED • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Rear position lights • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: used, Technical specifications: Number of rollers: 3 Roller size: 120 x 60 mm Maximum stroke: 20 mm Number of speeds: 8 Distance between the first and last roller: 286 mm Distance between rollers: 133-153 mm Motor power: 0.75 kW Lasdozvm Rfepfx Ab Nsh Motor speed: 1400/2800 rpm Feed rate: 2-4-5.5-6.5-11-13-16.5-33 m/min.

Condition: new, Technical specifications: Number of rollers: 6 Roller size: 120x60 mm Maximum feed: 20 mm Number of speeds: 8 Feed speed: 2-4-5.5-6.5-11-13-16.5-33 m/min Distance between rollers: 133-154-133-133-133 mm Distance between the first and last roller: 686 mm Motor speed: 1400/2800 rpm Laodszvm Sispfx Ab Noh Motor power: 0.75 kW

Condition: used, all stainless steel nett width 450 mm Motor Type MS 6 - 25 HZ Ljdpfx Ajzzaxmjb Nsah 380 - 440 V GN 128,50 kg dimensions : ± 2.060 x 750 x 600 mm Opening for filter or sieve No base/frame

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, Smooth exterior walls Equipment: - Lashing rails - 10x lashing points - Smooth GRP coating Net price: €7,058.82 / Gross price: €8,400.00 Article number: ULK226431819.02 Technical data: • Brand: Unsinn • Model: UKU 421719-26-14 • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU: 2 years from first registration • Interior dimensions (LxWxH): 426 x 175 x 194 cm • Exterior dimensions (LxWxH): 569 x 227 x 252 cm • Loading height of the floor: 55 cm • Permissible total weight: 2,600 kg • Unladen weight: 665 kg • Payload: 1,935 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant aluminum chassis for safe driving characteristics • Side walls made of Unique Panels, consisting of GRP-steel-sandwich, similar to white RAL 9016. Transparent roof for good visibility during loading • Loading area made of multiple-layer glued screen-printed plywood 18mm, non-slip and waterproof • Rear frame and edge profiles made of special aluminum profiles, anodized for attractive aesthetics • Tailgate with gas struts and non-slip surface • Twist lock and hinges galvanized • Reversing aid • ALKO overrun device and parking brake • Plastic mudguards • 13-pole connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! Lsdpfjzy Anuox Ab Noah We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, Sandwich construction Equipment: - Lashing rails - 8x Lashing eyes - 30mm insulated wall Net price: €7,542.02 / Gross price: €8,975.00 Article number: TKD227402020.02 Technical data: • Brand: Vezeko • Model: TK D • Vehicle type: Box trailer • Vehicle condition: New • First registration: Not yet registered Lasdpfezy A T Dsx Ab Neh • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 405 x 204 x 205 cm • External dimensions (L x W x H): 563 x 255 x 269 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 913 kg • Payload: 1,787 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust design • Floor panel made of Finnish multiplex • Numerous crossmembers, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Aluminum ramp • Non-slip with gas struts • With 4 outriggers, hot-dip galvanized • Instead of 2 rear doors • With twist-lock latch, lockable • Load capacity max: 800 kg • 2x maneuvering handles at the front • Rear frame on hot-dip galvanized steel, massively welded • 8 lashing brackets recessed in the floor (750 DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection all around in the interior • Maintenance-free rubber spring axles from ALKO • Automatic reversing system • ALKO inertia braking system and parking brake • Plastic mudguards • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Ramp Equipment: - Spare wheel - Robust steel body - Highly customizable Net price: €7,092.44 / Gross price: €8,440.00 Article number: GP3235401702.01 Technical data: • Brand: Brian James • Model: General Plant • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 400 x 170 x 30 cm • External dimensions (L x W x H): 569 x 230 x 210 cm • Loading height of the floor: 48 cm • Permissible total weight: 3,500 kg • Tare weight: 847 kg • Payload: 2,653 kg • Chassis: Low loader (wheels beside the body) • Tires: 185/70R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Universal all-round construction machinery trailer - unique on the market • Every available option can be flexibly added or removed, allowing for needs-based customization for almost any application • Attachment option on all 4 corners for side panels, tarpaulin frames, side panel extensions, or front wall extensions • Vehicle also designed for all options after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, other ramps, attachments, etc. can be retrofitted at any time • Robust steel fenders with non-slip perforated profile • Reinforced screen-printed plywood floor, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with additional longitudinal beam under the loading area • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Very low chassis for a low approach angle • Lashing points at the bottom and top of the side panel (1000 dAN/kg), TÜV certified • Side panels color: black • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse assist system • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock, ALKO • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED side marker lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Automatic heavy-duty support wheel • 5-year chassis warranty Laodpfxozy Di Tj Ab Nsh _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, SHARPENING MACHINE MOD. APE 40 UP TECHNICAL SPECIFICATIONS: Sharpening diameter from 2 to 40 mm Right and left cutting edges from 1 to 12 Drill angle 40°-180° Horizontal wheel center electric spindle power 0.76 kW Vertical wheel center electric spindle power 0.18 kW Laodpfszhplcex Ab Njh Pump motor power 0.06 kW Approximate weight 230 kg Machine dimensions mm 1040 x 750 x 1330

Condition: used, mileage: 28,246 km, power: 110 kW (149.56 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 8,500 kg, maximum load weight: 9,500 kg, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2011, operating hours: 28,246 h, construction height: 2,900 mm, Equipment: ABS, air conditioning, onboard computer, 281,098 km 28,246 hours Are you looking for a reliable transfer vehicle for professional in-plant transport tasks? The Mercedes-Benz KAMAG WBH 25 offers an interesting combination of specialized technology, comfortable equipment, and exceptionally low mileage. As a transfer vehicle, the KAMAG is specifically designed for demanding shunting and transport tasks. The automatic transmission enables comfortable and precise handling, while the air conditioning ensures pleasant working conditions in the cab. The mileage of only 28,246 km is particularly noteworthy. Combined with the 4,249 cm³ engine displacement and the initial registration date of 12/2011, this represents an attractive opportunity for companies looking for a specialized vehicle with low mileage. Laedpfx Abozhptyj Nsh Only 28,246 km, automatic transmission, and air conditioning – an interesting overall package for professional shunting and transfer operations. Specialized, comfortable, and ready for new tasks – see for yourself the possibilities of this Mercedes-Benz KAMAG WBH 25! For sale only to businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.