Used Engel Es 1800/250 Hl. for sale (22,087)

Condition: new, Year of construction: 2025, clamping force: 6,500 kN, Equipment: documentation/manual, ENGEL duo 3660/650 tech Year: 2025 Control: CC300 Integrated robot: ENGEL VIPER 40 Clamping force: 650 t Injection unit: 810 Screw diameter: 80 mm Possible screw diameters: 55 / 60 / 70 / 80 mm Shot volume: 1810 cm³ Injection capacity: 1660 g PS Injection pressure: 1800 bar (max. 2000 bar) Injection speed: 493 cm³/s Screw stroke: 510 mm Screw torque: 3600 Nm Max. screw speed: 210 rpm Plasticising rate: up to 118 g/s Nozzle orifice: 12 mm Tie bar distance (H x V): 1110 x 960 mm Platen size (H x V): 1510 x 1440 mm Opening stroke: 1800 mm Max. daylight opening: 1950 mm Mould height min./max.: 350 - 1200 mm Dry cycle: 2.8 s Itjdpfx Asza Au Njaxjk Ejector stroke: 250 mm Ejector force: 105 / 51 kN Installed drive power: 74 kW Oil tank capacity: 750 l Equipment: * ENGEL VIPER 40 integrated robot * 2-fold hydraulic core pull on moving platen * Tool heating with 32 control circuits * Hydraulic machine

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. Itodpfx Aaevvlyijxjk The machine can be inspected at the production site.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, total length: 2,610 mm, total width: 1,100 mm, total height: 1,030 mm, WILK MAREL – a machine for grinding fresh and frozen products. The machine can be used as a stand-alone unit or as part of an integrated production line. Power: 45 kW Voltage: 3x400V – 50 Hz or as required Control voltage: 24 V DC Material: AISI 304 stainless steel Auger: stainless steel Itsdpfxozlgvgs Aaxok Hopper capacity: 300 l Cutting blade: ø250 mm

Condition: excellent (used), CATALOG NUMBER 7212 TECHNICAL DATA - Track width: 250mm - Shaft width: 400mm - Shaft diameter: 80mm - Maximum blade diameter: 400mm - Blade bore diameter: 80mm - Maximum cutting height: 140mm - Table width with clearance: 730mm Iodpfx Aaezrmrusxetk - Table length: 2130mm From the top: - Pawls - Pressure shaft, slip type - Pawls - Pressure shaft, smooth - Saw shaft - Smooth pressure shaft, 4 pcs From the bottom: - Smooth slip shaft - Pawls - Track Infeed table + guide rail: - Roller width: 460mm - Feeder dimensions (L/W): 1660x630mm - Overall dimensions (L/W/H): 2010x630x900mm Outfeed table: - Feed rollers: 8 pcs - Roller width: 800mm - Overall dimensions (L/W/H): 4400x980x880mm - Centralized lubrication - Electric body raising/lowering: 0.55kW - Electric adjustment of saw shaft: 0.55kW - Stepless feed speed adjustment: 1–39m/min - Feed motor: 1.1kW - Main motor: 30kW - Extraction port diameter: 210mm - Overall dimensions of multirip saw (L/W/H): 2520x1870x2000mm + control panel - Total weight: approx. 2500kg ADVANTAGES – German-made – High cutting height – Infeed and outfeed tables – Used multirip saw, very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 1986, Engel ES 80/35 ST Itodpfx Aaetwmv Soxsk Closing 35 tons Year 1986 Scrow 22mm EC 88

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, clamping force: 6,374 kN, screw diameter: 90 mm, injection weight: 2,400 g, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Isdpfjy Ewxuox Aaxstk Clamping force: 650 t Tie bar spacing: 102.5 mm x 92.5 mm Screw diameter: 90 mm Shot weight: 2,400 g Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced dismantling and loading costs.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, clamping force: 7,845 kN, screw diameter: 105 mm, injection weight: 3,760 g, overall weight: 64,000 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 800 tons Tie bar spacing: 100 mm x 100 mm Screw diameter: 105 mm Shot weight: approx. 3,760 g MACHINE DETAILS Itjdpsy Ewqqefx Aaxek Weight: 64 t Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lower costs for dismantling and loading.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, pressing force: 35 t, operating speed: 10 mm/s, table width: 60 mm, total height: 2,510 mm, overall weight: 3,250 kg, travel distance Y-axis: 590 mm, working width: 1,250 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 1,000 mm, height adjustment type: electric, rapid traverse Y-axis: 110 m/min, working length: 1,250 mm, Servo-electric press brake SAFANDARLEY type E-Brake Premium 35-1250 ES Manufacturer Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - stroke 300 mm - CNC control in Y1 / Y2 / X / R axes - rear bumper in 2 CNC axes - X and R - 2D graphic control - model EC20 - light curtain - programmable - WILA tool system - upper clamp Iodpfx Aasv Eam Nexotk - WILA tool system - lower clamp possible dies 4V / 2V / 1V / type T with a base of 60 mm Machine in very good condition after technical inspection by the manufacturer. Max. pressure kN 350 Max. bending length mm 1,250 Max. construction height Q, standard (without tool adapter and table) mm 650 Max. press stroke mm 300 Upper beam positioning accuracy mm +/- 0.01 Max. correction for Y1 - Y2 programmable mm +/- 2.50 Max. Y-axis approach speed* mm/sec 180 Max. bending speed* mm/sec 10 Max. return speed mm/sec 180 X-axis positioning speed mm/sec 350 Max. range of stop movement - X axis mm 550 Max. range of stop movement (second stop point) - X axis mm 575 Max. range of stop movement (third stop point) - X axis mm 1,000 Repeatability of back stop positioning mm +/- 0.02 Max. range of movement of the stop - R axis mm 150 Repeatability of positioning R axis mm +/- 0.10 Speed of positioning R axis mm/sec 100 Weight kg 3,250 Connected power kW 11 Machine length mm 2,230 Machine width mm 1,775 Machine height - transport dimension mm 2,510 Mains voltage 3/N/PE 50Hz – 400/230V Machine connected - ready for presentation at the headquarters in Warsaw. Immediate availability

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 9,806 kN, screw diameter: 105 mm, displacement volume: 4,160 cm³, opening stroke: 1,100 mm, No reserve price – guaranteed sale to the highest bidder! Engel injection moulding machine with Engel ERC 83/2 - CL robot! TECHNICAL DETAILS Clamping force: 1,000 tons Screw diameter: 105 mm Injection volume: 4,160 cm³ Locking force: 1,100 tons Opening stroke: 1,100 mm Tie bar spacing: 1,400 x 1,150 mm MACHINE DETAILS Number of heating zones: 7 Pump drive power: 130 kW Machine weight: 64 t + 18 t EQUIPMENT Iedpfsy Ew Aasx Aaxetk Engel ERC 83/2 - CL robot Separate control cabinet Note: For the purchase of multiple items from the same location (see offers below), you will benefit from reduced costs for dismantling and loading.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 76,988 h, clamping force: 800 kN, screw diameter: 30 mm, total length: 4,050 mm, total width: 1,930 mm, total height: 2,200 mm, overall weight: 5,200 kg, warehouse no.: 503561 manufacturer: ENGEL type: VICTORY 200-80 Tech controller: CC100 year of construction: 2005 operation hours: 76988 h clamping force: 800 kN size of mould plates h x v: 670 x 600 mm min. mould height: 250 mm max. open daylight: 700 mm opening stroke: 450 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A measures of machine l x w x h: 4.05m x 1.93m x 2.2m total weight: 5200KG technical data robot-system handling type: Linearhandling manufacture: Engel controller: ER-HLI 31 VC year of construction: 2005 handling weight: 2 kg screen-text: deutsch total weight: 250 kg Itsdezt Sdfepfx Aaxsk

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 4,903 kN, screw diameter: 80 mm, injection weight: 1,402 g, overall weight: 25,500 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Iedpfx Aasy Ewqwjxstk Clamping force: 500 tonnes Tie bar distance: 840 x 840 mm Screw diameter: 80 mm Injection weight: 1,402 g Mould height (min – max): 250 mm – 850 mm MACHINE DETAILS Machine weight: 25,500 kg Note: When purchasing multiple items from the same location (see offers below), the most favourable costs for dismantling and loading will be applied.

Condition: excellent (used), Year of construction: 2000, Engel ES 330H80V/125HL .2F Year of manufacture: 2000 Closing force: 125 tons Multi-component injection molding machine Control system: CC100 Cylinder H: 35 Cylinder V: 18 Itsdpfxoigrine Aaxsk 1x Hydraulic core pull unit, BAP 1x Proportional hydraulic indexing plate connection, BAP 16x Hot runner zones 2x Magnetic clamping plates for BAP and FAP

Condition: used, Year of construction: 1994, 25,000-liter stainless steel tank Dimensions: 3.4 x 3.5 m Itsdpfx Aew I R Srjaxsk Used in the milk industry

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) Itsdpfoyw Aa Ujx Aaxek 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours and in like-new condition. The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in like-new condition. This is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but has now been released for sale as part of a site relocation. • The order confirmation from ENGEL to NYPRO can be found in the documents. The original new price was approximately €330,000. The selling price is €78,500 including crane. Iedpfx Aswb Dl Teaxjtk I can provide you with the technical data upon request, but it is also available in the documents below. Included in the price: Dismantling the crane onto two Euro pallets, as well as removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. If you are interested or have any questions, please do not hesitate to contact me. The machine is located near Karlsruhe and can be inspected there. Delivery is possible within a few days. You can find the order confirmation from ENGEL to NYPRO in the documents below!

Condition: used, Year of construction: 2007, Lamination press Manufacturer: Dimter Type: PROFIPRESS L2500 Year of manufacture: 2007 Isdpfxjzuzwqs Aaxstk Technical data Wood dimensions to be processed Wood width, panels: 30 - 150 mm Wood thickness: 11 - 60 mm Wood inlet length: 800 - 2500 mm Panel widths, variable: max. 1300 mm Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2 The pressing surface per press cycle must not be smaller than 100 cm2 Filling width of the press per cycle: min. 650 mm / max. 1300 mm Max. filling area of the press per cycle: 3.25 m2 (The max. usable press width depends on the widths of the individual lamellas.) Wood type Softwood/hardwood Press without options Electrical connection, press: 7 kW Electrical connection, 40 kW generator: 56 kW Operating voltage: approx. 400 Volt / 50 Hz (C/s) Collection table extended to 3700 x 1300 mm, with stainless steel wood support Motor-driven multi-function slider Lamination press Profipress L 2500 Press bed area approx. 2500 x 1300 mm Sturdy base frame with lower press table made of stainless steel as a grounding electrode Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances In multi-lane operation, filling widths may vary by a maximum of 15 mm Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement Integrated hydraulic unit for generating pressing force and driving the hydraulic motors Control cabinet and control panel Protective cladding Additional individual pressure elements from above Automatic gluing station with precision gluing head Infeed for different widths Camera Washing and rinsing device for gluing head Modem incl. software for online connection Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/650 pico injection molding machine ENGEL robot Control system: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Technical data Clamping unit Clamping force: 6500 kN (650 tons) Distance between columns (H × V): 1100 × 960 mm Platen dimensions (H × V): 1510 × 1440 mm Mold height (min./max.): 650 / 1150 mm Mold opening stroke: 1400 mm Maximum distance between platens: 2050 mm Maximum mold weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit Itsdpeywrtwsfx Aaxjk Screw diameter: 90 mm Maximum injection volume: 2740 cm³ Maximum injection weight (PS): 2520 g Maximum injection pressure: 2180 bar Standard injection pressure: 1910 bar Screw L/D ratio: 20:1 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plastication rate: 77 g/s Nozzle clamping force: 150 kN Drive and power supply Drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1000 l Hydraulic equipment 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the stationary platen 4 cascade valves on the stationary platen ENGEL robot ENGEL linear robot Integrated with the machine control system Designed for automatic part removal Robot control from the CC200 system Synchronization of robot operation with the injection molding machine cycle

Condition: like new (used), Year of construction: 2024, clamping force: 27,000 kN, ENGEL DUO 36060/2700 TECH Iodpfx Aozvc N Reaxstk Manufacturer: ENGEL Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Condition: excellent (used), Year of construction: 2018, 2500 litre system for cooking and cooling ready meals, soups, broths, fruit preparations, jams and marmalades, traditional and international dishes, sauces and pastes, confectionery. Installed new in 2018 at a cost of over £450,000 Itsdpew Rn S Usfx Aaxek

Condition: good (used), Year of construction: 2009, clamping force: 1,500 kN, Equipment: documentation/manual, ENGEL VC 1050/150Tech Itsdoy Rn E Aopfx Aaxsk Screw: Ø 50 mm CLAMPING UNIT Clamping force: 1500 kN Opening stroke: 607 mm Ejector stroke: 150 mm Ejector force: 61 kN DRIVE Pump drive power: 30 kW INJECTION UNIT 1 Screw diameter: 50 mm Max swept volume: 422 cm³ Screw speed max: 250 r/min Screw speed current: 250 r/min Injection rate: 210 cm³/s Injection rate incr.: 165 cm³/s Spec. inj. pressure: 1955 bar Spec. inj. pressure+: 2332 bar Nozzle stroke: 350 mm Nozzle cont. pressure: 67.2 kN

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Max. cutting length: 1,550 mm Itsdpsvaatlofx Aaxok Throat depth (side clearance in frame): 50 mm Sheet passage: 16 mm Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front 2 swing-away backgauges Finger guard with handle recess Ball rollers integrated in the support table Angle gauge with vernier scale Foot switch Condition:Used, in good condition

Condition: used, Year of construction: 1994, type of input current: three-phase, Equipment: documentation/manual, I am offering a continuous-flow rotary mixer from Wöhr, available due to a company liquidation. Includes control system, sand hopper, and sand feeder. Spare blades for the mixing screw are also included. The machine is currently still connected and was operational until the company closed. Year of manufacture: 1994 Capacity: up to 5 t/h Siemens spare parts, as well as a laptop with software and memory chips, are included. 2 folders with documentation. For self-dismantling. More photos and details, as well as a viewing appointment, are available upon request. Ijdpfozb Eh Uox Aaxstk Please feel free to contact me via classified ads with your price offer. For self-dismantling. Dismantling can be organized for an additional cost. Sale ONLY to businesses. An invoice with VAT will be issued. Without warranty.

Condition: new, Year of construction: 2025, operating hours: 5 h, NEW - Arjes Impaktor 250 EVO 2 with a set of paddle shafts (green cuttings, wood). Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight 14,500 kg Standard configuration Engine: Volvo-Penta, Stage V / 129 kW Hook lift Track drive Overband magnet with discharge hopper Water spraying for reduced dust widening Paddle shafts incl. quick-change cassette Crusher bars Factory paint finish in orange-grey Optional on request: Itjdpotql S Tsfx Aaxek Star shafts (tires, waste, plastic) Concrete shafts (building rubble, asphalt) Concrete crusher basket

Year of construction: 2020, operating hours: 6,134 h, condition: like new (used), functionality: fully functional, We are offering this like-new Bedo and Lantech carton erector/carton sealer with a conveyor system, manufactured in 2020. Manufacturer: Bedo and Lantech Model: Carton erector/carton sealer/conveyor system Year of manufacture: 2020 Condition: like new Machine type: Carton erector/carton sealer Iedpfxozbix Do Aaxstk If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2020, condition: excellent (used), Laiyi LY-ASCP100-1800 is a single-sided extrusion laminating line for paper packaging applications, specifically for paper cups and bowls. The machine is designed to extrude a thermoplastic polymer directly onto a substrate and bond them together in a single, continuous process. Year of installation: 2020 Condition: very good Iedpfx Aozt Rzijaxetk Main technical specifications: Media width up to 1800 mm Laminating width 800 - 1700 mm Rewinder/unwinder diameter Ø1600–1800mm Media thickness 30-400 gsm Extruded resin: LDPE/PP/PBS/EAA (Screw No.1, 110kW, max 400kg/h) Coating thickness: LDPE 8 - 20gsm, PLA 25-45 gsm Machine speed up to 250 m/min 3 Corona units (12kW + 8kW + 8 kW)