Used Ewd Esterer Complete Saw Frame Hde for sale (21,424)

Condition: used, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, cutting length (max.): 6,100 mm, total length: 8,000 mm, overall weight: 3,000 kg, type of input current: three-phase, height adjustment type: electric, cutting width (max.): 650 mm, saw band width: 50 mm, Equipment: chassis, Seldom-used Woodmizer LT70 Mobile Cutting length: 6.10m Electric motor: 25 HP Model for 50mm saw bands Cut thickness calculator: Accuset2 Band lubrication system: Lube-Mizer Electric height adjustment Electric feed Dcsdpfx Answn Tygjfog Hydraulic package Plus3: log turner, log loader, 2x vertical side supports, manual side support, support rollers (one powered), center clamp A-bed rails Chassis (3000kg) with road approval Debarker Radio remote control Approx. 300 hours of use Year of manufacture: 2023 Viewing possible in 16775 Gransee OT Neulögow

Year of construction: 2002, condition: good (used), Complete Desoutter screwdriver system consisting of: 1 x Transducer controlled angle screwdriver Desoutter ERA40J Art.Nr .: 6151650800 Torque range: 8 to 40 Nm Output: 3/8 " Number of revolutions. 900 min-1 Length: 458 mm Weight: 2.1 kg 1 x Transducer controlled angle screwdriver Desoutter ERA60J Art.Nr .: 6151650810 Torque range: 15 to 60 Nm Output: 3/8 " Number of revolutions. 570 min-1 Length: 469 mm Weight: 2.2 kg 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Moeliche screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 2 x motor cable for hand screwdriver 5 m length Art.Nr .: 6159170720 Dedpfsdcmizox Anfscg 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: new, Year of construction: 2022, functionality: fully functional, We offer this stationary WOOD MIZER EG300, in new condition, year of manufacture 2022. Manufacturer: WOOD MIZER Model: EG300 Dcsdpfxeyngfbe Anfog Year of manufacture: 2022 Condition: new Type: stationary If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: used, functionality: fully functional, Equipment: cabin, For Sale: Complete Log Sawing Line Complete log sawing line in excellent condition, ideal for professionals in the wood industry. This robust and high-performance equipment will allow you to optimize your production. Technical details: 23.5 m bark conveyor Storage capacity for 30 logs over a 16 m length 5 stops 4 log turners 5 flippers Double-guided log clamp with independent HYDRAULIC output Straightening function for better log alignment Powerful and precise winch for optimal control 30 m ejection rollers with 4 Left/Right ejections Djdpfx Aexdc H Ejnfecg Complete operator cabin, excellent condition Other features: 140 frame LBL slabber Loader Pre-crosscut saw Hydraulic carriage with 5 stops, Gillet brand Complete mechanization for increased performance For more information, photos, or to arrange a visit, please contact us!

Condition: good (used), Complete Resaw Line from intake to stacker with an Dcodpfjm Uylpjx Anfeg AKE TB2B twin rebandsaw

Condition: excellent (used), Complete saw line with infeed,ARI SKR 600 reducer, ARI KS 122 Saw, ARI BKR 600 2:nd reduser, ARI DS 70 multi rip and ARI KT 52 eding line with full scanner Dcsdoikvl Ropfx Anfeg Full bottom floor for waste handling All electrical cabinets and hydraulics

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Söderhamn 447 infeed 240-12 chipper canters Block tilt and infeed 240-12 chipper canter Dodpfx Ajwp E E Dsnfjcg Euromill profiles Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: excellent (used), functionality: fully functional, ARI high capacity line for big logs Dcsdpfx Ajwp E Tnonfeg Log deck 2 sections Step feeder Log conveyor Debarker infeed (Remill) Debarker Cambio 90-75/6 (or a Cambio 500) 2d scanner for reject boxes Log conveyor with 2 reject boxes Log conveyor, kickers to the left Buffering deck and step feeder Log conveyor Rema 3d scanner AriVislanda LT2 auto log turner 2006 AriVislanda LI-600 log centering infeed 2006 AriVislanda RL-600 Reducer AriVislanda QSS-700 Saw 2011 AriVislanda VFW 600 L 2011 AriVislanda board separator 2006 Block tilt AriVislanda block infeed type Nils AriVislanda RC-600 Reducer Ingvar Persson turn table AriVislanda 500A Infeed AriVislanda 509-7F Multirip AriVislanda boardseparator Beltconveyor Dual Edging lines Söderhamn (1 left 1 right) 2 x 300 m/min Cross conveyors Söderhamn Elevator Söderhamn 483 Scanners Söderhamn 528 Infeed Söderhamn 5100 Edger Söderhamn 5400 Edger outfeed with reject displacement EdgeIT system

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 25/111/615/18, Cutting line for medium-sized wood Circular sawmill - minimum log diameter: 120mm - maximum log diameter: 400mm - minimum log length: 1500mm - maximum log length: 3200mm - feed rate: 7.5-24m/min - power of main motors: 75+90 kW - saw diameter 600mm WP210 multi saw Djdpfx Aevdtzqonfjcg - maximum cutting height: 210mm - minimum cutting height: 30 mm - maximum cutting width: 500 mm - minimum cutting length: 1500 mm - feeding speed: 5-25 m/min - power of main electric motors: 2x75 kW - diameter of saws 350mm The line includes: PK2200 log feeder Prism roller conveyor TT5/600/400 G caterpillar circular sawmill Control panel Roller table with a mechanism for dropping offsets and side boards Powered roller table 4m SB4000 base roller table WP210 multi-sawing machine Conveyor belt L=25000 More information available at the indicated e-mail address or by phone. Possibility of line presentation from Monday to Friday 08:00-16:00

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. Dodpfxjxg Ubyj Anfscg The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Chipper canter 2 Linck VM 50 Scaner before profiling Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Linck resaw, max. cutting height 285 mm Transport to timber sorting Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer

Condition: used, Year of construction: 2000, functionality: fully functional, Trolley with belt for 1500 cm saw, log loading ramp, and 8 m board conveyor with retention. Saw motor 37 kW. Dcsdpfsxvpd Isx Anfjg

Condition: used, Year of construction: 2007, functionality: fully functional, cutting length (max.): 5 mm, overall weight: 3,000 kg, Includes: -Complete log sawmill -Log loading ramp -Roller track 6 meters It is in excellent condition and fully functional Dcjdpfxov Stdbo Anfog

Condition: excellent (used), Year of construction: 2021, Year of construction: 2021/2022 Space requirement for entire system: 10x32 meters Total connected load: approx. 350 kW Peak value: approx. 120 kW Average value: approx. 90 kW Personnel requirement: min. 2 people Cutting capacity: maximum 80-100 fm/8h Round log diameter: min. 10cm max. 100cm Round log lengths: min. 100cm max. 600cm Edging system: 3-stack variable / 120mm cutting height Due to a restructuring of the company, a new, complete band sawmill is for sale as follows: - Round log feeder - Block puller - Balz debarking machine BG 90 6W-GR - Steep conveyor with feeder - Tension carriage ELCA Legno CRO 17 - Band saw ELCA Legno SNI 14 - Conveyor belt - Trimming machine Möhringer 323 001 12 - Stacking system M-TEC - Disposal line / chipping system ZENO ZTI 600/520/160 Dsdpfevw Ry Dsx Anfocg

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 Dcsdpfx Ajvtwzmsnfsg - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Dedpfx Ansx Tpzdsfecg

Condition: good (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 141-8300, cutting length (max.): 7,000 mm, saw blade width: 100 mm, year of last overhaul: 2022, Zenz BN 110 S saw with mechanization 22 kW drive motor 7 m cutting length 5 vertical supports 2 tensioners (+ 2 supports) Log lifter 4 leveling devices with claws 1 log roller 1 pre-cutter 20 l water lubrication drum PLC control Seat mounted on armrests PLC on the left - joystick on the right Mechanization, built in 2022, consisting of: Hydraulic flap frame for removal from the saw with electrically driven roller conveyor Roller conveyor with hydraulic ejectors Dcsdswhcwhopfx Anfog 4 m roller conveyor All electrical and hydraulic elements can be operated from the operator's station. Zenz automatic sharpening machine, type AHB No. S-1012

Condition: good (used), Year of construction: 1998, functionality: fully functional, Canter Linea COSTA, model Prisma 30, with roller infeed for 6 m and roller outfeed left and right Dcjdpfx Anjwt Uqqjfjg

Condition: used, type of input current: three-phase, cutting length (max.): 6,000 mm, cutting height (max.): 650 mm, roll diameter: 700 mm, saw drive: 27,200 W, input voltage: 380 V, conveyor belt speed: 30,000 mm/s, Equipment: documentation/manual, For sale: used but well-maintained automated wood cutting line NG-700L, manufactured in Lithuania. The machine has been lightly used and is still connected; last time it was operated about a year ago and worked without issues. The line is offered complete with: log loading ramp, receiving and sorting table, auxiliary outfeed table (roller conveyor), control cabinet, detailed technical drawing and leg layout scheme for relocation. Technical specifications: Djdpow N S S Aefx Anfecg Log length capacity: 2.5 – 6 m Max. log diameter: 65 cm Saw wheel diameter: 700 mm Saw linear speed: 30 m/s Productivity: 1.5 – 3.0 m³/h Rated supply voltage: 380 V ±19 Maximum power consumption: 27.2 kW Log clamping and turning: hydraulic Dimension setting: programmable Line operation: operator console Additional information: The equipment is in good condition and ready for further use. Full documentation and drawings are included to facilitate transport and installation.

Condition: used, functionality: fully functional, The primary breakdown section of the saw line is available for sale. The package includes a Heinola (Ahlström) chipper canter and a quad band saw (BM1500), together with centering, infeed, and outfeed conveyors. The equipment is offered as a complete, fully operational solution. Dcodpfsyka Nrex Anfjg

Condition: used, Complete sawmill, for now only for sale as a whole. Reservation for individual purchase possible at any time. Sawmill consisting of: 01. Log infeed 3-strand Mayrhofer with separator with inserter Total length: 8 meters Width: 3.5 meters 02. Fully hydraulic carriage Mayrhofer with auxiliary carriage with rails Track gauge: 90 cm 03. Pini & Kay FN65 HH frame saw Passage width: 650 mm Drive motor: 33 kW With saw blades With suspension With intermediate gear With splitting wedge With scraper conveyor for sawdust 04. Frame roller table with 3 extractors and steep conveyor Length: 8.5 meters Width: 1.8 meters Roller width: 1.6 meters 05. Extraction table 4-strand Length: 4.5 meters Width: 2 meters 06. Steep conveyor 4-strand Conveyor length: 3.6 meters Width: 3.8 meters 07. Double edger Paul KME 2 0-line left Right-hand machine Drive motor: 22 kW With 2 under-table crosscut saws With hydraulic roller lifting With hydraulic width adjustment With sliver separator With extraction table/cross conveyor for slivers With elevator for main material With conveyor belt With spiral roller conveyor With manual box sorting (10 boxes/carts) 08. Sharpening room consisting of: Frame saw sharpener Vollmer CNHV 1978 Set device Loroch SGB 6 1983 09. Drying chamber Vanicek Internal dimensions: Length: 4.53 m Width: 9.16 m Height: 4.4 m Dcjdewptuyspfx Anfeg External dimensions: Length: 4.6 m Width: 9.3 m Height: 4.62 m Location: Austria, near Vienna

Condition: used, Year of construction: 1970, functionality: fully functional, Complete operational sawmill line for sale due to restructuring Dcodpsx E Sn Dsfx Anfeg

Condition: good (used), Year of construction: 1996, functionality: fully functional, Complete Kara Master sawmill Year of construction 1996 CE mark The sawing line consists of Dcsdpfeum I S Esx Anfeg 2 Kara Master 08M sawing machines 1 Kara edger Technical data of the KARA MASTER machine Motor: 37kW / 1500 rpm Hydraulic unit: 5.5kW / 1500 rpm / 50 Hz Transfer table 9.5 m long, 0.7 m wide Weight, kg approx. 4900 kg Saw blade diameter 800-1200 mm (with undercarriage 800...1100 mm) Cutting height: 295...495 mm Recommended speed for the saw blade diameter 800mm 1300r/min 900mm 1170r/min 950mm 1100r/min 1000mm 1050 rpm 1100mm 960r/min 1200mm 880 rpm Diameter of the blade hole: 50 mm 015 mm, distance from blade hole 50 mm 9 m x 660 mm Additional equipment Pump: 34 l/min, 150 bar (blade shaft speed 1100 rpm) 180 bar from the tractor hydraulics (only in mobile) Stepless feed 0...130 m/min Kara Pro 200 control unit Programmable up to 120 sizes in steps of 0.1 mm. Programming addition during sawing, storage of the last dimension used. 9 Feed speed, m / min infinitely variable 0-130 m / min Kara Edger Type 32-250 Year of construction 1996

Condition: like new (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 6,100 mm, roll diameter: 1,150 mm, saw drive: 30,000 W, Equipment: scorer, Industrial Bandsaw – High Performance Model: - WRC 1150 AC Motor Power: - 30 kW Cutting Capacity: - up to 30 m³ / 8 hours Maximum Log Diameter: - Ø 1150 mm Applications: - industrial wood processing - joinery - pallet production - beams - solid wood cutting Maximum Cutting Length: - 6,100 mm (extendable) Total Length: - 6,100 mm - 6,000 mm with automatic log infeed - 6,300 mm long automatic outfeed roller conveyor, reversible (right/left) Input Power Type: - three-phase Height Adjustment: - electric Maximum Cutting Width: - 650 mm Bandsaw Blade Width: - 130 mm Dodpsx Hqpvofx Anfecg Equipment: - chassis Key Advantages (according to manufacturer datasheet): Performance and Efficiency: - High motor output enables fast and efficient cutting. - Exceptional productivity with up to 30 m³ cutting capacity during an 8-hour shift, with minimal energy consumption and low maintenance costs. High Precision and Accurate Cutting: - Perfectly straight cuts with minimal deviation. - Achieved through advanced technology and stable construction. Rugged Construction: - Withstands the toughest working conditions. Easy Operation and User Friendly: - Thanks to intuitive controls, quick installation, and straightforward adjustments, this saw is ideal for both industrial operations and individual craftsmen. Versatility and Durability: - Manufactured from high-quality materials, this machine is suitable for working with a wide range of wood types – from soft to hard, solid or composite. Intelligent Technology: - The innovative control system automatically adapts to different working conditions, saving time and resources. Safety Systems: - Integrated safety mechanisms ensure secure operation. Ecological and Energy Efficient: - Low energy consumption reduces operating costs and is environmentally friendly. High Degree of Automation: - Siemens / Schneider PLC and Wravor FastSmartCut program, always with manual operation option.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, saw drive: 6,000 W, Industrial Crosscut Saw – Precision in Every Cut • Manual operation • Automatic infeed roller conveyor • Infeed length: 5.5 m • Outfeed length: 3 m • Laser dimension indicator Dcedpfxsx Hqn Eo Anfeg Model: o Wravor 700 B Motor power: o 6 kW Applications: o industrial wood processing o carpentry o pallets o beams o solid wood cutting Input power type: o three-phase

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, Complete fully automatic sawmill line STORTI year of production 2020 Conditon as new, complete set contain all equipment for installation as steel supports, communication walkways, air compressor with whole installation. Machinery set: - Chainbelt log loading station - Multiprisma Storti MP350 - Belt transporting/sorting station - Chainbelt transport to multiblade saw - Multiblade saw Storti MP350 Dsdpfx Anet H Nm Rofocg - Double saw with automatic positioning Storti RM500 Whole line is fully equipped for immediate production start