Trimming saw

Esterer DKV

Condition: used, Esterer DKV double edger Maximum pass-through height: 160 mm Maximum pass-through width: 800 mm Zero line on the right Left-hand machine (adjustable saw blade on the left) with 2 crosscut saws Nwsdpfoy Da Iijx Anfof with roller infeed with lath head with sliver separator with drive motor (45 kW) with control cabinet with saw blades Location: Germany, near Lake Chiemsee

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C Nwsdpfxswp Rqfo Anfjf • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Nwjdpfx Anov Uq Tlofef Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces Nodouz Hmxopfx Anfowf - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Year of construction: 2010, condition: excellent (used), Autoclave Brand Spomasz Model WSA 18 Nodpfx Anjwfz Rnofewf Serial number: 106 Year of construction: 2010 Voltage 3 x 400 V, 50 Hz, 16 A Dimensions: 5400 mm x 2600 mm x 2300 mm It has a current UDT inspection

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm Njdpfeh Di H Dox Anfewf -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Condition: used, Year of construction: 1989, functionality: fully functional, Used dip installation, manufacturer Bachhäubl HS2 12.5 - 12.50 m long x 1.50 m wide x 1.50 m high, clear internal dimensions; - Year of manufacture: 1989; - Control unit with timer relay for setting immersion time. - Wooden support with frame approx. 7 m long, hold-down device with 7 prongs, approx. 7 m long; - Basin interior in good condition, - single-walled, without collection tray! - Weight approx. 8.5 tons - Transport dimensions approx. 13.00 x 2.35 x 2.80 m Nodpfsx Aktwsx Anfjwf - Installation is supplied without impregnation agent and without sludge, - free loaded on truck!

Year of construction: 1993, condition: good (used), Clamping carriage Braun WES fully hydraulic with auxiliary carriage with tracks Track width: 79 cm Nwodpefuh Dysfx Anfef good condition - immediately available Visit also my other advertisements. I am looking forward to your inquiry.

Condition: not inspected (used), Year of construction: 1991, Torwegge multirip saw Chain width 250mm cutting height 100mm Total connection 39kW Nwjdpfxoucnukj Anfof

Year of construction: 1993, condition: used, - working width (mm): 2200 - engine power (kW): 22 - top rollers: with PU rings - bottom rollers: knurled - Saw shaft: included Nsden I Twyjpfx Anfswf