Used Gea Gea Vm 400 30 for sale (40,309)

Condition: like new (used), functionality: fully functional, Hydraulic 3-jaw chuck, Samchully, diameter 300 mm and diameter 400 mm, and hydraulic clamping cylinder, type: Y-1550 RE. Sold individually or as a set! Redpfxozlcc Nj Am Tocd

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Rcodpfjzfx Uhjx Am Tsd Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: not inspected (used), Manufacturer: Stork Capacity: 660 m3/h Engine: 160 kW Rodpfx Amsm Uc R Uj Tecd

Condition: new, Year of construction: 2026, overall weight: 5,500 kg, fuel type: diesel, tank capacity: 1,000 l, color: red, power: 400 kW (543.85 HP), output current: 720 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 440 kW (598.23 HP), nominal power (apparent): 500 kVA, total length: 4,450 mm, total width: 1,600 mm, total height: 2,550 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, Are you looking for a professional energy storage solution for industry, commerce, agriculture, photovoltaic systems, or emergency power supply? With the APS battery storage system, Albari Power Systems GmbH offers a high-quality and scalable energy storage system for demanding applications. Technical data: * Storage capacity per unit: 233 / 254 / 440 kWh * Power: 115 / 125 / 220 kWp * Lithium iron phosphate technology (LFP) * High-quality battery modules based on CATL technology * Liquid-cooled battery system * Integrated battery management system (BMS) * Suitable for indoor and outdoor installation * Expandable to larger storage systems up to 2 MWh per application Areas of application: * Self-consumption optimization * Peak shaving (load peak reduction) * Electricity cost reduction * PV surplus storage * Emergency and backup power supply * Industrial and commercial enterprises * Agriculture * Charging infrastructure * Municipal utilities and energy suppliers Rodpfet Aa Idsx Am Tecd Optionally available: * APS Energy Management System (EMS) * Island operation / microgrid solutions * Integration of photovoltaic systems * Integration of diesel generators * Integration of charging infrastructure / charging stations * Remote monitoring and energy management * Container solutions up to several MWh per unit Your advantages: ✓ High safety thanks to LFP cell technology ✓ Long service life and high cycle stability ✓ German EMS with high safety standards ✓ German system design by Albari Power Systems ✓ German system integration by Albari Power Systems ✓ Individual project planning and commissioning ✓ Service and support We will gladly create an individual concept for your application. Albari Power Systems GmbH 21376 Salzhausen Price on request according to project configuration.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Trotec, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, SP3000 400 Watt CO2 • 2.210 x 3.210 mm working area • Laser pointer • Gas kit • InPack Technology™ • 2.5” lens, 5.0” lens • Software-controlled Z-axis Rodpfxszaq Iks Am Tjcd • Active laser deflector shield • Air-cooled optics • Operator console without PC • Laser system complies with laser safety class 2 with integrated laser safety class 4 laser source • Traveling exhaust • Digital table exhaust system • Sonar Technology™ • Tandem operation • Standard PC for the operator console with mouse, keyboard, and 24” Full-HD monitor, Windows® 10 Multi-Language, JobControl® Expert pre-installed • Cooler for 400W/380V • Aluminum grid table SP3000 • Matching extractor for optimal results. 3-phase power supply Advantages of the Trotec SP 3000 Spacious working area: The SP 3000’s working area of 2,210 x 3,310 mm is designed for large sheet sizes. The working area is easily accessible from all four sides. The loading width is 2,500 mm, and it is open at the front and rear. The open design allows the system to be loaded from all sides, even during cutting. This makes daily work as productive as possible. Extremely fast cutting with the highest quality: Even at the highest speeds, up to 1 m/sec and 1g acceleration, the SP 3000 delivers the best cutting quality. The innovative drive concept, the precise linear guides, and the innovative drive concept testify to excellent construction, made in Austria. Air-cooled optics for optimal cutting quality: All optics are air-cooled with clean compressed air during laser processing. The optics are kept free from contamination that arises during laser processing. This guarantees maintenance-free operation and a long service life for these high-quality components. Fully enclosed beam path for 24/7 operation: The laser beam is protected along its entire path through the machine. Safe operation is guaranteed. The class 4 laser system can be used as safely as a class 2 system. No additional safety measures are required. Reliability through InPack Technology™ and Harsh Environment Protection: The core of Trotec’s unparalleled mechanical reliability is the fully dust-proof and maintenance-free axis system. Traveling exhaust package: The sophisticated airflow concept with extraction above and below the workpiece guarantees high-quality engraving and unparalleled cutting results. JobControl® software package: Much more than a standard printer driver. With JobControl software, you can optimize the use of your material and customize the workflow to your own needs. Service and support: Your direct connection to the manufacturer of your system guarantees the best service and availability of parts.

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 425 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 17,000 W, total height: 2,230 mm, total width: 1,800 mm, overall weight: 6,460 kg, controller manufacturer: FAGOR, product length (max.): 5,530 mm, number of axes: 2, This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information. • Max. swing over bed: approx. 400 mm • Max. turning diameter: approx. 400 mm • Distance between centers: 3,000 mm • Bar capacity: approx. 105 mm • Spindle • Main spindle: horizontal • Spindle bore: 105 mm • Spindle nose: A2-type (depending on configuration) • Speed range: variable (CNC-controlled) • High-torque spindle suitable for heavy turning • Range I: 0 - 424 rpm • Range II: 425 - 1700 rpm • Axes Rjdpfx Amsybbiuj Tecd • X-axis: cross slide • Z-axis: longitudinal slide • CNC-controlled feed and rapid traverse • Tool system • Turret: CNC tool turret • Number of tool stations: depending on configuration • Suitable for internal and external turning • Control system • CNC control: Fanuc / Siemens (depending on configuration) • Full CNC contouring and threading capability • Application • Medium to heavy-duty turning • For shafts, pipes, flanges, and general production parts • Suitable for series and job-shop production • A ball screw was replaced about 3 years ago • Accessories: 1 Lynette and various tool holders Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Kistler NC joining module with dual-station/spindle unit Kistler NCFH 60 servo press with feed slide & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial dual-station/spindle unit designed for automated series production (e.g., friction welding or precision pressing). The system is characterized by exceptional precision, integrated force-displacement monitoring (piezoelectric sensor technology), and an extremely robust design capable of withstanding continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electronics manufacturing, or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Using built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process in relation to position. Rcsdpfx Aezcpnzjm Tsd Flexible process control: Enables advanced functions such as "joining to block," position-controlled pressing, or force-controlled joining (when combined with a suitable controller, e.g., Kistler maXYmos). Automated workpiece holding: The coupled spindle station features an automated clamping function (pneumatically or hydraulically actuated via integrated cylinders), making it perfect for automated series production and assembly lines. Sturdy machine bed: The entire mechanical assembly is mounted on a heavy-duty welded steel frame to withstand the immense forces (up to 6 tons per side) generated during operation. Joining module manufacturer: Dr. Staiger Mohilo+Co GmbH / Kistler Group Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal force: 60 kN (equivalent to a pressing force of approx. 6 tonnes) Max. total spindle stroke: 400 mm Max. travel speed: 300 mm/s Motor type: AC hollow-shaft servo motor (165H-180E) Holding brake: 18 Nm Certification: CE marking Scope of delivery: Kistler NCFH 60 joining module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 250,000 kg, overall weight: 400,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. Rjdpfxoytrxke Am Tecd * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), modernized machine with new LTG StoreControl L control system currently 6 identical machines available External dimensions: Overall height 4889 mm Overall width 2785 mm Overall depth 2810 mm Redsd Sphiepfx Am Tocd Total load capacity of the machine up to 2 x 15,000 kg 63 supports with a central web for up to 400 kg load each in the clear internal dimensions: W = 2460 mm D = 825 mm Usable height up to 55 to 750 mm Start of the opening at 875 mm above floor level, then 875 mm high Motor power: Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Color: gray/blue Surface cleaned, signs of use possible Subject to errors and technical changes, as well as minor deviations in photos. Delivery and installation are currently mainly in Germany, Austria, and several neighboring countries.

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with arch and straight GF 3130-550-400 RA2507 Technical data: Conveying length (NL): 3130 mm (ascending conveyor 2475 mm + arch 655 mm) Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope/slope: adjustable Optionally available: Supports Side guides Redpsy R Hb Asfx Am Tjcd frequency converter for stepless speedcontrol Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK screw compressors are a guarantee of quality and reliability. Our many years of experience in compressor sales have enabled us to develop models that offer an excellent price-to-performance ratio. This model is ideally suited for small workshops and small manufacturing companies. It features high air delivery (380 l/min) relative to its compact dimensions, allowing several devices to operate simultaneously. Its very low noise level (60 dB) makes working in the same room comfortable and unobtrusive. Are you looking for an efficient and reliable compressor for smaller workshops, service points, or hobby applications, while requiring a single-phase power supply? The CORMAK LUFT 400 screw compressor is the perfect solution. With a 3.0 kW motor and an impressive actual air delivery of up to 400 l/min, it provides a constant supply of compressed air necessary for the efficient operation of impact wrenches, blow guns, spray painting equipment, and other pneumatic tools. The LUFT 400 features a reliable and robust direct-drive transmission system, eliminating vibrations and the need for belt drive adjustments. This proven solution ensures stable operation and a long service life by providing direct power transfer from the motor to the screw airend. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving access to key compressor information and increasing operational flexibility and process control. Rcsdpfx Ameza Al Uo Tsd Permanent Magnet Motors (PM Motors) represent an innovative approach to electric drive technology, offering a number of significant advantages over traditional induction motors. An inverter (also known as a variable frequency drive, VFD) is an advanced electronic device that revolutionizes the operation of screw compressors. Its use allows smooth adjustment of the compressor motor speed according to the current demand for compressed air. High-quality CORMAK screw compressors, such as the LUFT 400 model, are based on technologically advanced screw airends that determine their efficiency and reliability. By combining proven solutions with innovation, CORMAK ensures that every airend is refined down to the smallest detail to meet the demands of even the most intensive operation. In CORMAK screw compressors, such as the LUFT 400, a key element ensuring reliability and work optimization is the advanced MAM-series control panel. Designed for efficient compressed air system management, this controller enables continuous monitoring and rapid response to all operating parameters. TECHNICAL SPECIFICATIONS Motor power: 3.0 kW / 4 HP Power supply: 230V / 50Hz Air delivery at 0–6 bar: average 400 L/min Air delivery at 6 bar: 390 L/min Air delivery at 8 bar: 380 L/min Air delivery at 10 bar: 380 L/min Outlet connection (G): 1/2" Dimensions: 1130 × 520 × 1300 mm Weight: 170 kg

Condition: new, Year of construction: 2026, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Key Features: Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Rcjdpfxjv Iqaxj Am Tjd Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Year of construction: 2026, condition: new, functionality: fully functional, working width: 400 mm, drive type: Direktgetriebe, funnel diameter: 400 mm, nominal power: 7.5 kW (10.20 HP), number of blades: 33, rotational speed (max.): 150 rpm, rotor diameter: 300 mm, rotor width: 400 mm, sieve perforation: 6 mm, Direct driven staggered rotor Special knife design makes adjustment unnecessary Easy access for maintenance and cleaning Rodpen Hqxfjfx Am Tjcd Gegqxgljx Slow rotor speed creates less noise and dust Easily customizable to suit different applications Rotor diameter (mm) 300 Rotor width (mm) 400 Rotor speed (rpm) 150 Drive capacity (kW) 7.5 Rotor knives (pcs) 33 Stator blades (rows) 2 Screen size (mm) > 6 Weight approx. (kg) 550

Condition: new, Year of construction: 2024, load capacity: 300 kg, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. Rcsdpfxjrypmgo Am Ted incl. foot remote control Digital display with welding time limiter (if required)

Condition: new, Year of construction: 2024, load capacity: 300 kg, Equipment: foot remote control, rotational speed infinitely variable, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Rcedpjvbrqxsfx Am Tsd Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding rotary table Protec KT 300 H, 170/400 special version Load horizontal 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-change chuck diameter 300mm, surcharge €450.- Quick-change chuck diameter 400mm, surcharge €550.- Crank gear motor 0 - 90° stepless adjustment Speed stepless 0.01 to approx. 5 rpm. Rjdpfxovu Anzs Am Tscd Incl. foot remote control Digital display with welding time limit (if required)

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle speeds : 18000 [rpm] - Spindle power : 25 [kW] LINEAR AXES - Travels on X/Y/Z axes : 760 / 510 / 520 [mm] - Rapid traverses rates (X/Y/Z) : 45 / 45 / 40 [mm/min] A ROTARY AXIS - Travel : -110 / +30 [°] - C ROTARY AXIS Redpey Tzctjfx Am Tecd - Travel : 360 [°] - Rapid traverse rate : 25 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : Ø248 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 48 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.940 x 4.060 [mm] - Machine height : 2.865 [mm] - Machine weight : 6000 [kg] EQUIPMENT - CNC : Hurco WinMax / MAX5 - Interactive programming - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Behringer Eisele VMS 400 A metal circular saw for processing almost all steel qualities. Integrated coolant unit and micro-spraying system, selectable in the control system as required Hydraulic saw feed and quick clamping vice with clamping pressure reduction NC control with graphic display and keypad 3 selectable operating modes (manual mode, series and single cuts) Convenient stroke adjustment of the saw unit via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Type: VMS 400 A metal circular saw Year: 2013 Condition: used, very good Flat 90 ° [mm] 200 x 120 Flat 45 ° [mm] 140 x 120 Flat 30 ° [mm] 100 x 100 Square 90 ° [mm] 120 Square 45 ° [mm] 120 Square 30 ° [mm] 100 Round 90 ° [mm] 140 Round 45 ° [mm] 140 Round 30 ° [mm] 110 Feed length 800 mm Drive power 2.0 / 2.6 kW Speeds 8 / 16 / 32 / 64 min-1 Saw blade diameter 400 mm Saw blade feed hydraulic Rcjdpoy S Eygefx Am Tod Material feed ball screw Hydraulic clamping device Minimum quantity lubrication Chip clearing brush Length 3,100 mm Width 1,500 mm Height 2,000 mm Weight 1,350 kg Material support height 920 mm Scope of delivery: Documentation 4x saw blades 1x feed roller conveyor 2m

Condition: used, FAS belt conveyor 850-530-400 RA2427 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 850 mm Nominal/outer width (NB): 530 mm Belt width (GB): 400 mm Profile height: 170 mm Drive roller: Head drive Rcodpfx Amow Nq Tle Tjd Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2001, Lippert belt conveyor riser with arch GF 9530-550-400 RA1627 Technical data: Conveying length (NL): 9530 mm (riser 2000 mm + bow 7530 mm) Frame width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): 0.3 Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Redpfx Aoxqt Ruem Tscd Optionally available: Supports Side guide one and both sides feed belt/lead belt frequency converter for stepless speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2017, Transnorm conveyor belt GF 2100-400-300 RA2405 Technical data: Make: Transnorm Model: TS 6565 motor-driven belt diverter D=65mm Rcjdpfx Aswhd H Rem Tsd Conveyor length (NL): 2100 mm Frame width (NB): 400 mm, 600 mm with motor Belt width (GuB): 300 mm Overall height (BH): 200 mm Support feet: optionally available Conveyor speed (v m/s): 2.0 Drive: Nord Electrical data: 50Hz V380-500, kW 1.1 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Dematic incline belt conveyor 10300-500-400 RA2347 Conveyor length (FL): 10300 mm (800 mm forward run, 8400 incline segment and 1100 mm arch) Outer width/nominal width (NB): 500 mm Outer width/nominal width with motor: 750 mm Belt width (GB): 400 mm Profile height: 135 mm Climbing belt with curved section Infeed conveyor with overdrive Arched section with 2 adjustable bends Rubberized drive drum Drive: SEW 400 V 0.55 kW Optionally available supports side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik Rodpfsvp S Ruox Am Tscd

Condition: used, Year of construction: 2001, Lippert belt conveyor riser with arch GF 6530-550-400 RA1634 Technical data: Rcjdpfx Amjxqt Rhs Tsd Conveying length (NL): 6530 mm (riser 2000 mm + bow 4530 mm) Frame width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): 0.3 Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Optionally available: Supports Side guide one and both sides feed belt/lead belt frequency converter for stepless speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor riser with arch GF 7630-550-400 RA1626 Technical data: Conveying length (NL): 7630 mm (riser 4000mm + bow 3630 mm) Frame width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): 0.3 Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Redpfoxnth Usx Am Tecd Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Optionally available: Supports Side guide one and both sides feed belt/lead belt frequency converter for stepless speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor riser with arch GF 9216-550-400 RA2434 Technical data: Rjdpfx Asxqt Rnsm Tocd Conveying length (NL): 9216 mm (riser 2000 mm + bow 6530 mm) Frame width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): 0.3 Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Optionally available: Supports Side guide one and both sides feed belt/lead belt frequency converter for stepless speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics