Used Roadtec Sb 2500 for sale (4,448)

Condition: used, Year of construction: 2005, edge thickness (max.): 3 mm, plate width: 3,000 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Plate thickness: min. 10 mm Plate thickness: max. 60 mm Plate width: max. 3,000 mm Edge thickness: min. 0.4 mm Edge thickness: max. 3 mm Number of magazine positions for edge rollers: 2 Gbjdpe Aihtdefx Aanew Feed rate: max. 40 m/min Distance between carriers: 500 mm Machining units Number of edge machining units: 8 End capping unit Number of motors: 2 Motor power: 0.35 kW Speed: 12,000 rpm Fine milling unit for flush milling and rounding Number of motors: 2 Motor power: 1.03 kW Speed: 12,000 rpm Edge rounding unit Number of motors: 4 Motor power: 0.35 kW Speed: 12,000 rpm Pre-milling unit 1 Number of motors: 1 Motor power: 5.5 kW Pre-milling unit 2 Number of motors: 1 Motor power: 5.5 kW EQUIPMENT Carrier chain Pressure system with rubber belt Preheating lamps for the plate side Edge roller magazine with 2 positions EVA hot melt adhesive tank EVA hot melt pre-melter Pressure roller unit End capping unit Fine milling unit for flush milling and rounding Edge rounding unit 2 pre-milling units Automatic, time-controlled activation of the second pre-milling unit Edge trimming unit Glue application unit Air heating unit with 2 motors PC WIN EDGE control system WIN EDGE programming software CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7818

Condition: used, Year of construction: 1995, inner dimension length: 1,450 mm, inner dimension width: 1,050 mm, inner dimension height: 1,750 mm, overall weight: 1,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Oven chamber Capacity: 2,500 l Number of chambers: 1 Internal width: 1,050 mm Internal depth: 1,450 mm Internal height: 1,750 mm Number of doors: 1 Material: Structural steel MACHINE DETAILS Heating and fan Burner: Weishaupt, Type WG-10N/1A Burner output: 10–42 kW Fan motor power: 2.2 kW Gsdpfxj Ai Ncue Aansbw Dimensions and weight Footprint: 2.0 x 2.2 m Overall height: 3.2 m Weight: 1,500 kg EQUIPMENT Gas heating Fan Control cabinet (as is) CE marking

Condition: reconditioned (used), Year of construction: 1995, operating hours: 18,000 h, functionality: fully functional, rotor diameter: 370 mm, number of blades: 71, rotor length: 2,500 mm, power: 75 kW (101.97 HP), rotational speed (max.): 130 rpm, year of last overhaul: 2026, VAZ2500 (VAZ145/250U) Gedpfj Ah E Ngjx Aanjbw

Condition: used, Year of construction: 2010, functionality: unexamined, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, overall weight: 16,000 kg, spindle speed (max.): 6,000 rpm, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, input voltage: 50 V, number of spindles: 10, Equipment: motor brake, Description Weinig Powermat 2500 10 spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed rate: 37 kW / 12-120 m/min, Spindle arrangement: 1- Bottom (22 kW) - with hydraulic clamping and fully automatic straight-edge jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) - with fully automatic straight-edge jointer 5– Bottom (18.5 kW) with hydraulic clamping and fully automatic straight-edge jointer 6– Top (18.5 kW) - with hydraulic clamping and fully automatic straight-edge jointer 7- Top (53 kW) - with hydraulic clamping, speed 3000-6000 RPM 8- Bottom (53 kW) - with hydraulic clamping, speed 3000-6000 RPM 9- Top (53 kW) - with hydraulic clamping, speed 3000-6000 RPM 10- Bottom (53 kW) - with hydraulic clamping, speed 3000-6000 RPM Short infeed table 1.3 meters (4 rollers) with 2 driven rollers above the table, and 2 driven rollers in the table. Both table rollers are adjustable in height. Table height adjustment with electronic digital display. Incl. 2 heavy-duty side pressure rollers, diameter 140mm, pneumatic. Support feet, height 320 mm for table height 1190 mm Marathon P O W E R Coating for machine table, fences, and guide rails (excluding infeed table and special table plates). Special coating to protect table plates, fences and Gsdpfo Airx Sex Aanebw guide rails from excessive wear. Recommended for processing abrasive materials (e.g. tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table lubrication. Dwoc Arfjz S U Upj Nbnsd Driven rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above with diameter 120 mm. In the area of the right and left spindles. Supplier Iurchiv Hobelmaschinen 91320 Ebermannstadt, DE

Condition: used, Year of construction: 2022, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. Gbodpfed Nxn Nsx Aanow hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 06/2022, loading space length: 13,590 mm, loading space width: 2,490 mm, loading space height: 2,720 mm, total length: 14,000 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,770 mm, color: white, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 8.400 kg Carrying capacity: 21.600 kg GVW: 30.000 kg Functional Tail lift: Dhollandia DHLMR.20, tail lift, 2500 kg Gbsdpfx Aas Ai E Aaonsw Make of bodywork: Kassbohrer Maxima XJ2 Plywood Box Maintenance, history and condition Number of owners: 2 APK (MOT): tested until 06/2027 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 08/2023, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, total length: 13,980 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,770 mm, color: white, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 75%; Tyre profile right: 75% Gjdpfe Ai E Ahex Aanjbw Weights Empty weight: 8.140 kg Carrying capacity: 21.860 kg GVW: 30.000 kg Functional Tail lift: Dhollandia DHLMR, tail lift, 2500 kg Make of bodywork: Kassbohrer Plywood Box Maintenance, history and condition Number of owners: 2 APK (MOT): tested until 08/2027 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, ## 2021 Star SB-20R Type G – 20 mm CNC Sliding Head Lathe 7 axis | Twin spindles | Driven tooling | Guide-bush / non-guide-bush operation | FMB magazine bar feeder Available from Swiss CNC, this 2021 Star SB-20R Type G CNC sliding head lathe combines 20 mm bar capacity, twin-spindle machining and a versatile tooling platform for precision component production. Equipped with FANUC CNC control, it offers turning, milling, drilling, tapping and back-working capability within a compact machine layout. The 10,000 rpm main spindle and 9,000 rpm sub-spindle both feature C-axis control, supporting accurately positioned machining operations on the front and rear of the component. The fully independent sub-spindle allows front- and back-working operations to overlap where the component and programme permit, helping reduce cycle times and minimise additional handling. ### Guide-bush and non-guide-bush flexibility A key feature of the SB-20R Type G is its ability to switch between guide-bush and non-guide-bush operation. Guide-bush mode supports the material close to the cutting point, making it particularly suited to slender components and longer turned features. For shorter components, non-guide-bush operation can reduce bar remnant length and improve material utilisation. This flexibility allows manufacturers to adapt the machine to different component geometries and production requirements. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SB-20R Type G | | Year of manufacture | 2021 | | Maximum machining diameter | 20 mm | | Controlled axes | Seven: X1, Y1, Z1, C1, X2, Z2 and C2 | | Maximum headstock stroke — guide-bush mode | 205 mm | | Headstock stroke — non-guide-bush mode | Up to 2.5 × bar diameter, maximum 50 mm | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 9,000 rpm | | Sub-spindle chucking capacity | 20 mm | | Spindle positioning | C-axis control on both spindles | | CNC control | FANUC CNC | | Rapid traverse | Up to 35 m/min | ### Tooling capability - Gang-type turning-tool arrangement, with six 12 mm or seven 10 mm square turning-tool positions, depending on the fitted tool block. - Four front-working sleeve positions for end-working operations. - Cross-drilling and milling capability, with modular cartridge tooling configurations available for different machining requirements. - Four-position back-working station, supporting static or driven tooling according to configuration. - Independent sub-spindle movement for component transfer and rear machining. ### Included equipment - FMB Turbo 2-20 automatic magazine bar feeder for 3.2 m bar stock. - Filtermist FX mist extraction system. - LNS MH500 Turbo swarf conveyor. - FireTrace fire suppression system. - Selection of tooling and workholding. Gedoz U Acmepfx Aanjbw The supplied bar feeder, extraction and swarf-handling equipment provide a practical package for manufacturers looking to add automated 20 mm bar-machining capacity. ### Machine hours and availability Power-on and cutting hours to be confirmed. 2021 machines available in the UK, offered individually. Price on application, plus VAT. Delivery, installation and training available. Contact Swiss CNC for pricing, machine videos, inspection arrangements and further information.

Condition: new, Year of construction: 2026, Combined brushing, polishing, and belt sanding machine – conventional, semi-automatic, or CNC-controlled. A universal machine for processing plates, panels, profiles, and structures up to 650 mm in height by brushing, polishing, and sanding with a long belt or a brush. Work table size available from 2,500 mm x 1,000 mm (optional 3,000 mm x 1,250 mm) to 5,900 x 1,300 mm. Dimensions of the brushing or polishing disc: Ø 250 mm x width 200 mm. Sanding belt dimensions: 8,200 mm x width 150 mm (depending on the size, up to 14,500 x 150). Drive power of the brushing and polishing unit: 3 kW. Sanding belt drive: 3 kW. Weight: approximately 900 kg. We also supply the machines with 2 workstations / two sanding belts – for example, with 1 workstation for manual operation and an opposing workstation for manual and automatic operation. The work table is moved to the respective workstation on linear guides. Gedpfx Aj Ai D Unjanobw

Condition: new, Year of construction: 2026, Combined brushing, polishing, and belt sanding machine – conventional, semi-automatic, or CNC-controlled. A universal machine for processing plates, panels, profiles, and structures up to 650 mm in height by brushing, polishing, and sanding with a long belt or a brush. Work table size available from 2,500 mm x 1,000 mm (optional 3,000 mm x 1,250 mm) to 5,900 x 1,300 mm. Dimensions of the brushing or polishing disc: Ø 250 mm x width 200 mm. Sanding belt dimensions: 8,200 mm x width 150 mm (depending on the size, up to 14,500 x 150). Gedps Ai Ealofx Aanebw Drive power of the brushing and polishing unit: 3 kW. Sanding belt drive: 3 kW. Weight: approximately 900 kg. We also supply the machines with 2 workstations / two sanding belts – for example, with 1 workstation for manual operation and an opposing workstation for manual and automatic operation. The work table is moved to the respective workstation on linear guides.

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Turning length 705 mm Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm X-axis travel 260 mm Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Total power consumption 40 kVA Gjdpfx Aaszwvv Tsnsbw Machine weight approx. 6.4 t Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Material length: 250-1650 mm Length: 2400 mm Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, HSBM 2020-20 SB – Manual Swivel Bending Machine HSBM SB – Manual swivel bending machine in a heavy-duty design with segmented upper tools Easy to operate Segmented upper tools Swivel bending function with secure clamping of the workpiece through pre-tensioning of the upper die Heavy, compact welded construction For simple bending with precise adjustment of the bending angle using a stop with a scale Particularly low maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note regarding technical data: Sheet thickness max.: Performance data refer to material with a tensile strength of 400N/mm²; Bending capacity stainless steel: Factor 0.75; Bending capacity aluminum: Factor 1.2; Hardened upper tools are required for bending stainless steel. Model: HSBM 2020-20 SB Article no.: 3772920 Technical data Working width max.: 2,020 mm Bending capacity max. steel 400 N/qmm: 2 mm Bending capacity max. steel 400 N/qmm without die extension: Bending capacity max. steel 400 N/qmm with die extension: Bending capacity max. stainless steel: 1.5 mm Bending capacity max. aluminum: 2.4 mm Bending angle max.: 135° Gsdpfx Aaocnxc Nonsbw Segment division Clearance between upper and lower die max.: 120 mm Length: 2500 mm Width: 710 mm Height: 1500 mm Weight: 1,020 kg Location: Ex works - free loading -

Condition: excellent (used), warranty duration: 6 months, Used WP Kemper SBR 2500 belt rounding machine For doughs with high rye content and high stickiness. Technical data: Gbsdsuwqufepfx Aansw Capacity up to 2000 pcs/hour. Weight range: 500-2000g. Electrical connection: 400V; 1.3 kW. Dimensions: 2700 x 660 x 1500 mm.

Condition: used, The Nagema FBFC/1 is a heavy-duty, industrial Continuous Butter Making Machine (CBM) engineered for the commercial dairy sector. Manufactured by the historic German engineering brand Nagema, this machine processes bulk cream into high-quality butter via a fully continuous automated cycle. A detailed technical breakdown of the machine's specifications and functional systems is outlined below. ----- Technical Specifications - Production Capacity: Up to 2,500 kg/h of finished butter output. - Raw Material Suitability:Sweet / Cultured Cream: 45% to 50% fat content. - Sour Cream: 38% to 42% fat content. - Dimensions: Approx. 390 cm (Length) × 100 cm (Width) × 255 cm (Height). - Total Machine Weight: Approx. 3,100 kg. - Main Drive Motor (Beater): 22 kW to 30 kW operating at 650 to 1,950 rpm (manually adjustable via an external handwheel or modernized variable frequency inverter). - Auxiliary Drives:Auger feeder motor: 0.4 kW (925 rpm). - Raw material pump engine: 1.1 kW (2,760 rpm). - Water pump motor: 1.1 kW (2,760 rpm). - Integrated Centrifugal Pumps: 2x Nagema pumps with a maximum capacity of 13 m³/h. - Electrical Parameters: 380V / 50Hz, 3-phase power supply. ----- Structural Design & Materials - Hygienic Construction: All areas that come into contact with the product are made entirely of premium stainless chromium-nickel steel to satisfy strict food safety regulations. - Frame: Heavily reinforced painted steel, cladded completely with a stainless steel outer shell. - Controls: Simple, user-friendly control interface deployed directly on the machine body. Modernized variations often feature integrated variable frequency drives (VFD/Inverters) for smooth, digital speed management of the main churning drum. ----- Step-by-Step Functional Sections The FBFC/1 achieves continuous production by arranging its mechanical processes sequentially within its horizontal frame: [[1]()] Gsdpez S Ni Ujfx Aanobw - The Churning Cylinder (Beater): Cream is continuously pumped into the front end of a cooling-jacketed cylinder. Inside, the high-speed rotating beater strikes the cream forcefully. This mechanical action rapidly disrupts the fat globule membranes, reversing the emulsion to separate raw butter grains from liquid buttermilk. - Separation and Additional Churning: The resulting mix moves into a designated separation block. The buttermilk is systematically drained and collected by integrated centrifugal pumps, leaving behind a concentrated formation of pure butter granules. - The Kneading Zone: Dual counter-rotating augers push the raw butter grains forward. This mechanical kneading forces out remaining pockets of buttermilk moisture, tightly binds the butter matrix, and distributes water particles evenly. This process ensures the exact moisture profile (ranging from 16% to 25% based on settings) before the final product exits the machine. - Outfeed Distribution: The dense, finished butter is continuously extruded from the mouthpiece, frequently feeding directly into bulk packing systems or automatic wrapping machines. Technical Data & Specifications - Machine Type: Semi-automatic auger-fed system - Maximum Output: Up to 150 to 151 cartons per hour (depending on operator speed) - Product...

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, working width: 2,500 mm, welding power (max.): 500 kVA, wire diameter (max.): 10 mm, type of input current: three-phase, mesh size: 25,002,500 mm, continuous power (apparent): 500 kVA, The VARO SARG-2500 is an automatic line designed for the production of welded wire mesh for fencing applications, equipped with medium-frequency welding technology. Gbjdpfo Ahnkdsx Aanew The machine is designed to process mesh panels up to 2,500 x 2,500 mm, using longitudinal and cross wires with diameters ranging from 3.0 to 8.0 mm. The minimum adjustable pitch is 30 mm for longitudinal wires and 10 mm for cross wires. The welding system consists of 12 welding heads with double-stage pneumatic cylinders and 2 TECNA 250 kVA welding transformers, controlled by inverters. The production speed specified in the technical documentation is 70–90 welds/min. The line includes automatic loading of the longitudinal wires, an electronically controlled pushing system for feeding the wires into the welding station, and an automatic system for loading the upper cross wires. Mesh advancement is electronically controlled by a brushless motor, with adjustable mechanical grippers. After welding, an electronically controlled carriage transfers the mesh to the next processing stage. The system is equipped with two hydraulic side trimming units for cutting the protruding wire ends. The line also includes a bending station with an hydraulic press, needed for the 3D panels. After bending, the finished mesh is automatically transferred to the unloading station and deposited onto a supporting table or pallet. Machine operation is managed through a dedicated electrical control cabinet with Siemens S7 PLC, PC and operator panel for setting and controlling the production cycle parameters. Main Technical Specifications • Manufacturer: VARO • Model: SARG-2500 • Maximum mesh size: 2,500 x 2,500 mm • Longitudinal wire diameter: 3.0–8.0 mm • Cross wire diameter: 3.0–8.0 mm • Minimum longitudinal wire pitch: 25 mm, adjustable • Minimum cross wire pitch: 10 mm, adjustable • Number of welding heads: 12 • Welding transformers: 2 x TECNA 250 kVA three phases • Welding speed: 70–90 welds/min • Power supply: 400 V / 50 Hz • Hydraulic bending press: yes • Control system: Siemens S7 PLC + PC • Cross wire loading: Upper and lower • Side trimming: 2 hydraulic trimming units • Mesh feeding: Electronically controlled, brushless motor - optional: double wire automatic system installation

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. Gbedpfxjz R T Exj Aanjw The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: used, Year of construction: 1997, - Brand : Omme - Type: 2500 EBDZ - Year of construction: 1997 Gjdpe Agw H Esfx Aanebw - Weight: 2920 kg. - Hours: 9333 hours - Drive: Kubota diesel + Battery + 220 volt - Working height: 25 meters - Lateral reach: 12.7 meters - Wheel Drive / Movers - Extra nose wheel - Stamp plates 4x - Driving plates 6 x - Dutch license plate - Safety inspection possible - Aerial work platform book available - Maintenance history available - CE document available * Brand: around *Type: 2500 EBDZ * Construction year: 1997 * Weight: 2920 kg. * Hours: 9333 uur * Working height: 25 meters * Lateral reach: 13 meters

Condition: good (used), Year of construction: 2000, operating hours: 118,400 h, functionality: fully functional, machine/vehicle number: 182854, clamping force: 2,500 kN, overall weight: 14,000 kg, heating capacity: 23.1 kW (31.41 HP), type of input current: three-phase, For sale is an Arburg 630 S 2500-130 injection moulding machine. The machine is in good condition and ready for immediate operation. Technical data: Year of manufacture: 11/2000 Place of production: Made in Germany Clamping force: 2500 kN Operating hours: 118,400 h Injection unit: 1300 (shot volume/capacity) Total machine weight: 14,000 kg Gbodpfx Aasyx Daxensw Operating voltage: 400 V (3 ~ AC) Frequency: 50 Hz Heating capacity: 23.1 kW Pump motor: 45.0 kW Total connected load: 68.1 kW Transport and loading can be organised throughout Europe for an additional charge, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: new, empty load weight: 410 kg, maximum load weight: 2,090 kg, overall weight: 2,500 kg, loading space length: 3,010 mm, loading space width: 1,500 mm, loading space height: 350 mm, tire size: 185/70R13, Sturdy braked low-loader with tandem axle from the manufacturer ANSSEMS model BSX2500 301x150. As standard equipment, the Anssems box trailer with brake has aluminum side walls, internal locks, external lashing eyes, profile channels for mounting accessories or load securing, very stable welded steel frame, railing on the side, front high frame, front flap, pull-out supports for tailgate, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, tool box, lashing eyes, straps and lock. Godpfx Aaerz Rydsnebw

Year of construction: 2020, condition: ready for operation (used), Metal Band Saw manufactured in 2020. This BOMAR Extend 800.620 ANC 2500 features a hydraulic bundle clamping system and a mist lubrication system for efficient operation. It includes a laser alignment line and adjustable vise clamping pressure for precision cutting. The machine comes with selected accessories such as material stop systems and height-adjustable roller conveyors. If you are looking to get high-quality sawing capabilities, consider the BOMAR Extend 800.620 ANC 2500 machine we have for sale. Contact us for further details. • Saw blade deviation monitoring • Hydraulic bundle clamping system • Micronizer – mist lubrication system (24V unit) • Laser Liner – laser alignment line • Adjustable vise clamping pressure • Hydraulic saw blade tensioning • Version with 54 mm saw blade • Version with 5.5 kW drive motor Gjdpfs Ai D Tfex Aanjbw • Digital display for saw arm descent speed (feed rate) • Condition: Very good; used for about 6 months Additional equipment • Material stop system • Modification of the vise and top clamp at the machine’s exit side • Increased jaw height (500 mm) • Roller conveyors: • Infeed roller conveyors (X850), height-adjustable 740–840 mm, non-driven, 8 m long • Outfeed roller conveyors (X850), height-adjustable 740–840 mm, non-driven, 6 m long

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: VT 2573, spindle bore: 54 mm, spindle speed (max.): 2,500 rpm, swing diameter over bed slide: 400 mm, turning diameter over cross slide: 246 mm, distance between centers: 1,250 mm, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Gbodpfx Aajz Im Nijnjw Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800Kg Machine in Metric execution Machine Equipped with Acu-Rite 2 Axis Digital Readout System 3 Jaw chuck Quick change toolpost 5 Position turret Bedstop Single Bedstop Saddle guard Lighting Coolant system Chuck guard Rear splashguard

Condition: excellent (used), functionality: fully functional, Year of construction: 1983, working width: 2,500 mm, overall weight: 50,000 kg, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, pressing force: 50 t, type of input current: three-phase, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Technical data of the pres brake : Manufacturer: GÉFI Type: LE 50/2500 Year of manufacture: 1983 Gbjdpfxeyznhls Aansw Pressing force: 50 tons Maximum bending length: 2500 mm Dimensions: 2720x1550x2245 mm Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated.

Condition: excellent (used), Year of construction: 2023, Great opportunity to purchase this high-end CNC turning machine with driven tools, Y-axis and counter-spindle. This machine was built in 2022, but installed and first used in February 2023. Only 1545 actual operating hours on the counter. Including: Subspindle and Y-axis Built-in Motor Turret with 12 tool stations Chip conveyor Manual in-machine tool presetter (pivoting type) Manual in-machine tool presetter (removable type) (Spindle 2) Standard Workpiece Unloader (Built-ln Type) Coolant system with increased pressure of 5 bar Gbsdpfx Aae Aigt Rsnow Full technnical specifications available in the attached document. Optional: set of tooling and tool holders (availability is to be discussed) This machine is in very good condition and can be inspected in operation in Belgium. Immediately available for delivery. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: excellent (used), Year of construction: 2018, 2500 litre system for cooking and cooling ready meals, soups, broths, fruit preparations, jams and marmalades, traditional and international dishes, sauces and pastes, confectionery. Installed new in 2018 at a cost of over £450,000 Gbedpjw Rn S Uefx Aansw

Condition: used, Year of construction: 2020, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Gbedpfx Aozw D Haeanow Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment