Used Graule Carpentry Machine for sale (64,609)

Condition: used, Dimo Vertical Casting Machine, Top Platen 695mm x 696mm, Sat on Bottom Melting Pot Location: These lots are located in Warwick, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Tedpfx Aljz Akaqe Asc Lot 3 of Auction 3495

Condition: used, Year of construction: 2002, Chiron FZ 15 W High Speed Twin Pallet Vertical Machining Centre. Serial No. 147-18 (2002) with Fanuc Series 18i-M Control, Dual Peiseler AWUP 160 NC Rotary Units, Air Bench Mist Filtration Unit, Swarf Conveyor. Country of Origin: Germany Tjdpfx Alez Ar Ezo Aoc Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: reconditioned (used), Year of construction: 2004, machine/vehicle number: 63237, clamping force: 350 kN, total length: 2,759 mm, total width: 886 mm, total height: 1,900 mm, overall weight: 1,310 kg, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 35M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Tjdpfx Asz Armfjl Aoc Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Year of construction: 2000, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,200 kg, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Tsdpfjz Ak Diex Al Ajc Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2013, A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine is equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Specification Tjdpfxszzwg Uj Al Asc Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain. With following options fitted : - Pneumatic tool change ISO 30 - Drilling unit with ER25 collet. - Extended Y axis stroke 400mm - Increased clamping capacity 200mm. Year - 2013 CE Compliant Serial Number - 22170

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Tsdpfswkkpqsx Al Aec Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1131578, SPECIFICATION Trunnion table size 630mm x 500mm X axis traverse 762mm Y axis traverse 508mm Z axis traverse 508mm B axis tilt +110 deg -35 deg C axis rotation 360 degree Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate X, Y, Z axis 30.5/min Rapid feed rate B, C axis 150 degrees a second Toolchanger capacity 40 + 1 Tools Approx. weight 8900kg   Todpfx Alozr Nf Dj Aoc MACHINE EQUIPPED WITH: - Haas CNC Control System Through Spindle Coolant, with Auxiliary Filtration Swarf Conveyor Renishaw Wireless Intuitive Probing System High Speed Machining Lighting Enclosed Guarding

Condition: ready for operation (used), * Brand: Derrick Corporation * Type: F36-126D-3DD * Surface: 3200 x 800 mm - 2 Decks * Driving: 1 vibration motor * On stock: 2 pieces Tjdpeywmzcjfx Al Asc

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM TRAVERSES - 762 X 406 X 508 MM MAX CUTTING RATE 16.5 M/MIN SPINDLE MOTOR 20 HP Tedpfx Alez Ehxys Aoc 20 ATC 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT OVERALL DIMESIONS - 2790 X 2350 X 2650 MM WEIGHT 3.5 TON ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE .

Condition: ready for operation (used), functionality: fully functional, Konica Minolta Accurio Press C 4080 with 6.3 million copies, in good condition, tested and ready to print! Equipment: FS 532 RU 518 m IQ 501 + Video interface available as an option Todpfxsy U Ubls Al Aec PF 707 m As an experienced retailer of used copiers, we have developed significant expertise in packing and pallet shipping to guarantee that our customers receive machines in perfect condition. We ship copiers that originated from and were maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the largest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: ready for operation (used), Konica Minolta AccurioPress C 4080 with a capacity of 8 million copies. Equipped with: FS 532 RU 518 m PF 707 m IC 609 Tjdpfx Aszadfvsl Aec As an experienced retailer of used copiers, we have developed significant expertise in packing and pallet shipping to ensure that our customers receive machines in perfect condition. We ship copiers that originate from and have been maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: ready for operation (used), Konica Minolta Bizhub 1100, with only 2.3 million copies, tested and ready to print. Drum and developer with less than 10% usage! Equipment: Tedpez Dt Anofx Al Aec - PF 709 - FS 532 As an experienced retailer of used copiers, we have developed genuine expertise in packing and pallet/container shipping, to guarantee that our customers receive machines in perfect condition. Our company offers the largest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Todpfjz D D N Eex Al Aec Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Year of construction: 2015, condition: good (used), machine/vehicle number: 31650, Used cleaning machine Tedsv Htn Aepfx Al Aoc Make: MTM Type: RoJet Year of manufacture: 2015

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-1AWS_2, The VOGEL MH-FJ-1AWS carton sealing machine has a side drive belt system. The machine is specially designed for cartons in smaller formats. Carton formats: Length 160 - ∞ mm Width: 90 - 320 mm Height: 60 - 280 mm Tjdpfx Aez E Iqisl Aec Technical data: Length 1,090 mm Width 890 mm Weight 85 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-1AWS, The VOGEL MH-FJ-1AWS carton sealing machine has a side drive belt system. The machine is specially designed for cartons in smaller formats. Carton formats: Length 160 - ∞ mm Width: 90 - 320 mm Height: 60 - 280 mm Technical data: Length 1,090 mm Width 890 mm Tjdpfez E Iw Aox Al Aoc Weight 85 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Technical data: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 Tedpfx Alez E Iw Nj Aec CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 30019513, CNC machining center Hedelius RS 505 K18 Magnum, Year of manufacture: 2012 with Tsdpfoz E A Shex Al Aec - Heidenhain control system - AME chip conveyor - Machine cooling system - Hedelius KM500 lubricant filtration system The machine is available for purchase via online auction (due to insolvency) on our website. You can access the website by clicking on the link in the advertisement. Auction end date: October 7, 2026, starting at 6:00 PM.

Condition: ready for operation (used), functionality: fully functional, spindle bore: 20 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 65 rpm, overall weight: 170 kg, total length: 1,200 mm, total width: 450 mm, Single-phase 230-volt, 2-speed motor is running smoothly. Geared headstock, gears running in oil. 8 spindle speeds adjustable from 65 to 2800 RPM. Power feed in sideways directions. Thread cutting possible, gear changes included. MT2 tailstock spindle. Made in Austria. Emco cabinet. Quick-change toolpost. Distance between centers: 620mm Center height: 105mm Spindle bore: 20mm Emco FB2 milling column. Geared head, gears running in oil. 6 spindle speeds adjustable from 120 to 2000 RPM. Head adjustable in height and angle. MT2 spindle. Overall dimensions: 120x45x115cm Includes all accessories as shown in front of the machine. Contact us for shipping options! Tjdpsz E Rymefx Al Ajc €2,650.00

Condition: excellent (used), JBT Proseal GT2 direct from UK snack food factory. Available with optional 6 metre Proseal OC indexing conveyor (at extra cost). In beautiful condition. Also available with optional date coder and inline check weigher / metal detector. Tsdpfxsz E Nyfe Al Aec We have three identical lines.

Condition: good (used), Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinding machine, center grinding machine -Max. shaft diameter: 320 mm -Max. grinding length: 345 mm -Chuck size: Ø 133 mm -Dimensions: 1925/1135/H1755 mm Tedpoduiw Aefx Al Ajc -Weight: 1592 kg -functionally tested

Condition: used, Year of construction: 2022, Sanding machine Manufacturer: SCM Type: DMC System / E83 2000 Year of manufacture: 2022 Technical data Position 1 RC 250-2620 working unit for rollers with a diameter of 250 mm - RA-250 steel grooved roller - Time-controlled oscillating blower for cleaning the sanding belt - Motor with 22 kW - PR-E pressure unit with 2 rubber-coated rollers at the inlet of the unit Position 2 TIE-5000 working unit for internal, adjustable cross sliding shoe - PE 32T PWM3 electronic segmented shoe EPICS pitch 32 mm with PWM3 - Motorized rotary blower - Inverter-controlled motor, power up to 15 kW Position 3 Tjdpfxsz E Uxto Al Asc SC-2620 working unit for superfinish sliding shoe - PE 32/C PWM3 electronic segmented shoe EPICS pitch 32 mm with PWM3 - Time-controlled oscillating blower for cleaning the sanding belt - Inverter-controlled motor, power up to 15 kW Position 4 BSH 250 working unit for textured roller with a diameter of 250 mm - STY 250 brush roller with a diameter of 250 mm with Tynex bristles with a diameter of 1.27 mm - Pneumatic on/off switching of the brush roller - Inverter-controlled motor with 11 kW At the outlet SP/U 200 working unit at the outlet for cleaning rollers, diameter 250 mm - SPC 200 brush roller with a diameter of 200 mm - Motor with 1.1 kW - Time-controlled rotary blower for workpiece cleaning at the outlet of the brush unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, total width: 1,300 mm, total length: 1,750 mm, total height: 2,400 mm, Colour: Grey Empty weight: 2.000 kg - Documentation available: No - CE certificate present: No - Serial number: 955 - Drive system: Conventional - Positieklemming: Hydraulic - Arm length [mm]: 1570 - Y-axis travel [mm]: 1320 - Table length [mm]: 650 - Table width [mm]: 1300 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 0 - Min. Reach [mm]: 300 - Max. Reach [mm]: 1100 - Tool holder: MK4 - Min. spindle speed [rpm]: 102 - Max. spindle speed [rpm]: 2000 - Options: Drill unit feed, Tapping function, Clamping block Tedpfx Aozrgc Hel Aec - Transport dimensions: 1750mm x 1300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Alcohol Disinfectant Etc. Tedporivxcefx Al Asc A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00.

Condition: good (used), Year of construction: 2006, Used milling machine from Hartford Type: VMC-1600S Heidenhain iTNC530 CNC control X = 1600 mm Y = 800 mm Z = 660 mm Todpfx Aljz Hbf No Aoc Table dimensions: 1700 x 750 mm / max. 2000 kg 20-tool automatic tool changer Equipped with a 4th axis on the table