Used Haas Vf 6B 40 He for sale (27,200)

Condition: refurbished (used), Year of construction: 2005, operating hours: 14,923 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 41246 - Manufacturing date: 04/05 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm Nedpfx Aksyanlaocold - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: excellent (used), Year of construction: 2022, Ref: 11080 . 2022 Horizon CABS 4000-VF EVA Line Nledpey Awcbefx Akcjd Excellent Condition! Only 985,000 books produced! 'Computer Aided Binding System' designed for bind-on-demand production. ‘V’ = Variable, book on demand capability ‘F’ = Flap cover feeding capability Comprising: (2020) Tecnograf ‘MettaLibro’ Book block feeder SB-09VF Variable binder with hand feed station and 9 clamps LCD screen operator console for various functions/set-ups ‘PX-Core’ Central control computer system SI-15 book block sensor unit for auto system set-ups & quick book size/thickness make-ready S-09S Automatic feed unit Auto cover score & register settings from data input Milling & roughing station with DB-15 milling blower unit PM-20II EVA hot-melt pre-melt unit MU-09 EVA hot-melt spine glue unit with side glue discs Pile rotary grip cover feeder with double sheet detection LD-09 lay-down delivery belt PP-101 pre-stacking unit with approx. 9m conveyor to; HT-110 Automatic three knife trimmer HC-110 manual feed conveyor to use trimmer as standalone LCD screen operator console for various functions/set-ups Quick book size/thickness make-ready unit Dust bag extraction unit Roller delivery unit Including tools, accessories & manuals. Specification: Binder - book size: Max: 400 x 330mm (manual) Portrait Max: 330 x 250mm (auto) Min: 148 x 105mm Max: 330 x 320mm Landscape Min: 135 x 185mm Book thickness: 1 - 45mm Open cover size: Max: 400 x 660mm Min: 135 x 220mm Trimmer, book sizes: Max: 330 x 330mm untrimmed Max: 300 x 300mm trimmed Mechanical speed: Max: 4,000 cycles/hr. auto

Condition: new, Heidenhain LS 106C length measuring system, ML 440 mm, item no. 336961-40, serial no. 15510392F, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Nlodpfx Akji Eap Rscod

Condition: good (used), Year of construction: 2010, operating hours: 2,702 h, lifting height: 3,430 mm, fuel type: electric, mast type: duplex, battery manufacturer: Midac, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,000 mm, Empty weight: 3.360 kg Battery: 750 Ah, 48 V, Year of manufacture 2020, Brand of battery Midac Nljdpfx Akjzlithjcsd Lifting capacity: 2.000 kg Number of valves: 3 CE mark: yes Technical condition: good Visual appearance: good Fork carriage: Sideshifter Please contact Theo Lelie for more information

Condition: good (used), Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder -Quick-change turning tool holder: 16 B 1 -Shooting dimensions: see photos -Clamping height: 40 mm -Support length: 200 mm Nodpfx Ajpk Iqhjkceld -Quantity: 2x holders available -Price per piece -Dimensions: 200/65/H150 mm -Weight: 3.6 kg/piece

Condition: used, Sprockets, triplex sprocket, sprocket, conveyor sprocket Nljdpfxsiq Th Ij Akcsd -Pitch triplex sprockets: 1"x 17.02 mm -Number of teeth: 40 teeth -Diameter: 340mm -Total width: 105mm -Dimensions: see photos -Intake: Ø 75 - 76 mm -Total dimensions: Ø340 x 105 mm -Weight: 45.3 kg -other sprockets in stock

Condition: good (used), Weld studs, ceramic rings, tip ignition studs, head studs -Welding studs: with ceramic rings, 40 different types Quantity/Version: see photo parts list Njdpfsmxpt Iox Akcold -Delivery/Price: only complete set -Dimensions: 1200/800/H120 mm Total weight: 64 kg

Condition: used, maximum load weight: 35,750 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Braking system according to ECE-R13 Electrical system according to ECE-R48 The Kögel superstructure guideline must be observed! It can be accessed at [website address] Frame Chassis frame made of high-quality steel, but without an outer frame Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended), b) 2 x 20' ISO containers (frame extended), c) 1 x 30' ISO container flush at the rear (frame extended), d) 1 x 20' ISO container flush at the rear (frame retracted), e) 1 x 20' ISO container in the middle (frame retracted) 4 pairs of heavy-duty lashing rings Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable, adjustable in length via 1 pneumatic cylinder, low-maintenance guide on special plastic sliders and 2 extension rollers Automatic pneumatic locking of the extension Suspension Axle lift mechanism on axle 1 Control of the axle lift fully automatic, load-dependent Starting aid: activation via 3x brake, 30%, overload up to a speed of 25 km/h Operation on the chassis via switch, also possible from the driver's cab (switch in the cab required - PIN 12) Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120 Air suspension with approx. 180 mm travel Vehicle tires Tires 6-fold 385/55 R 22.5, 160J 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120) Chassis components Landing gear, mechanical with leveling foot, 24 t lifting capacity, single-sided operation on the right-hand side while driving Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with spray flaps 2 chock blocks with bracket Lateral protection device, according to ECE-R73, closed Underrun protection made of square steel tube according to ECE-R58 with a light carrier arranged above, protected Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection cables), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection Nlodpfjzkx Ifex Akcjd Air suspension system incl. 1 raising and lowering valve, mounted on the left-hand side in the direction of travel in front of the axle unit 2 non-interchangeable coupling heads at the front ISO 1728 Air tanks for braking system and air supply made of steel (EN 286-2) Rear impact guard Solid steel rear impact guard on the rear end cross member Electrical system / Electronics Light carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED side marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights 2 LED outline lights with arm, mounted on multi-chamber tail light 2 LED multi-chamber tail lights (without LCG) Plug connection at the front, 15-pole ISO 12098 (without connection cables) Corresponds to vehicle class FL, AT Information systems Kögel Telematics System BasicTrailer incl. location monitoring, coupling status, EBS data The monthly fees are regulated in a separate contract Signage Orange

Condition: used, maximum load weight: 34,250 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt from Equipment List: 09010.001 Braking system in accordance with ECE-R13 09020.001 Electrical system in accordance with ECE-R48 09050.001 The Kögel superstructure guideline must be observed! It can be accessed at [URL removed]. Chassis 10110.020 Chassis frame made of high-quality steel, but without an outer frame. Nledpfx Akszkx Hnjcsd 10300.010 Coupling plate with a 2-inch fifth-wheel coupling pin according to DIN 74080 / ISO 337 11110.105 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended) b) 2 x 20' ISO containers (frame extended) c) 1 x 30' ISO container flush at the rear (frame extended) d) 1 x 20' ISO container flush at the rear (frame retracted) e) 1 x 20' ISO container in the middle (frame retracted). 15200.140 4 pairs of heavy-duty lashing rings 27850.030 Rear frame extension, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable. Length adjustable via 1 pneumatic cylinder, low-maintenance guide on special plastic slides and 2 extension rollers. Automatic pneumatic locking of the extension. Suspension I 17160.013 Axle lift mechanism on axle 1 I 17165.113 Axle lift control fully automatic, load-dependent. Start assist: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). I 18330.210 Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120. Air suspension with approx. 180 mm suspension travel. Vehicle Tires 20540.170 Tires 6x 385/55 R 22.5, 160J (manufacturer of our choice) 20865.005 6 steel rims 22.5 x 11.75, offset 120 mm. Chassis Components 20110.010 Fifth wheel (manufacturer at Kögel's choice) mechanically with equalizing plate, 24 t lifting capacity. Single-sided operation on the right when driving forward. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular mudguards with spray flaps. 21300.001 2 chock blocks with holder I 22070.020 Lateral protective device, according to ECE-R73, closed. 27510.050 Underrun protection made of square steel tube according to ECE-R58 with a lamp carrier arranged above, protected. 27511.010 Height of the underrun protection profile min. 120 mm, designed for increased test loads. Brake / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638, (without connecting lines), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 connection. 33420.070 Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving forward in front of the axle unit. 34320.001 2 non-interchangeable coupling heads in front ISO 1728 34410.010 Air reservoirs for the brake system and air supply made of steel (EN 286-2). Rear Impact Guard 42551.040 Solid steel rear impact guard at the rear end beam. Electrical / Electronics 60500.021 Lamp carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED position lights and reflectors in front - flashing LED side marker lights - Superseal and bayonet connectors for the lights I 61500.110 2 LED outline lights with arm, mounted on multi-chamber tail light I 61910.120 2 LED multi-chamber lights

Condition: good (used), Year of construction: 1997, Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer of gearbox: Bonfiglioli type MVF 49/F -Speed: 50 rpm i= 28 -Manufacturer Motor elsto ES FC 80M4A-40 -Power: 0.55 kW -Hollow shaft: Ø 25 x 80 mm Nsdpozd S Eksfx Akceld -Protection class: IP 54 -Dimensions: 375/200/H210 mm -Weight: 12.1 kg

Condition: new, Universal milling machine with variable speed on vertical axis. Horizontal shaft speed adjustable by means of V-belts. Machine is delivered including: - Digital readout on 3 axes (Sino) - Feed on longitudinal and transverse displacement table - Pull rod M16 - collets set - Drill chuck 3 – 16 mm incl. ISO40 B18 mounting - Adapter sleeve ISO40-MC3 - Adapter sleeve ISO40-MC2 - cooling pump - work light - Horizontal arbor ISO40 – Ø22/Ø27 - T-slot bolts M14x55 (for mounting accessories on the table) Marke: KMS Typ : VF 420 Vario Spindelaufnahme: ISO 40 Spindeldrehzahl - : Vertikal: Variabel (100-600 / 350-2000 U/min) - : Horizontal: 9 Stück (600-1350 U/min) Abstand vertikale Spindel - Säule: Einstellbar 250 - 650 mm Abstand Vertikalspindel - Tischfläche : 60 - 360 mm Abstand horizontale Spindel - Tischfläche: 20 - 320 mm Spindelverschiebung vertikal: 120 mm Tischgröße: 1000 x 240 mm Tischverschiebung: 580 x 230 mm Motor: - Vertikale Spindel 2,2 kW (3 PS) Nljdjg Ul Nzjpfx Akcod - Horizontalspindel 1,5 kW (2 PS) Maschinenabmessungen : 1500 x 1220 x 2100 mm Maschinengewicht : 850 kg Netzspannung: 400V

Condition: ready for operation (used), Siemens 1FT5062-1AF71-4EB0 permanent magnet motor SN EF186446104001 + HE-65-M rotary encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos Nljdpfx Aksmbr Irocod

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 001/003, used, normal signs of use, 100% functional, scope of delivery as per photos Nljdexaigkopfx Akcjd

Condition: ready for operation (used), Tailstock from HAAS grinding machine, manufacturer unknown, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for costs of packaging and shipping! Nedpfxox Et T Us Akcjld

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 002/003, used, normal signs of use, 100% functional, scope of delivery as per photos Nledpfx Aksxaigqjcod

Condition: ready for operation (used), Fanuc A06B-6164-H311 #H580 Amplifier VSP 20/20/40-7.5 SN V12145549, used, good condition, 100% functional, scope of delivery as per photos Nsdpfx Akjrcuz Ejcold

Condition: ready for operation (used), Fanuc A06B-6164-H311 #H580 amplifier VSP 20/20/40-7.5 SN V12145477, used, in good condition, 100% functional, delivery as shown in photos Nljdpfx Asx Erggokcsd

Condition: ready for operation (used), High-speed spindle from HAAS grinding machine, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery according to photos, ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nedpfxoul Ipbo Akceld

Condition: ready for operation (used), High-performance tool spindle (presumably a WERA custom build) with Widia KM 40 clamping system, max. 8500 rpm. Housing dimensions: 265x152x139mm, connection flange dimensions: 120x125x42mm, with multi-tooth coupling, used, normal signs of wear, 100% functional. ATTENTION: Please request separate pricing for packaging and shipping! Nlodpfxji D Idio Akced

Condition: used, total width: 800 mm, total height: 1,600 mm, total length: 1,200 mm, Empty weight: 500 kg - Documentation available: No - CE certificate present: No - Serial number: 4234 - Power [A]: 450 - Power [kVa]: 50 - Transport dimensions: 1200mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg Nlodewyktnepfx Akcjd - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 70,205 km, power: 100 kW (135.96 HP), first registration: 02/2020, fuel type: gas, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 3,300 mm, loading space width: 1,910 mm, loading space height: 1,950 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, 2-seater, power steering, driver airbag, automatic transmission, tachometer, power steering, electric windows, cruise control, on-board computer, electric exterior mirrors, driver's air-suspension seat, central locking with remote control, Siemens tachograph, Thermo King V-500 dual cooling unit, wing doors, side door/right, power connection, wheelbase: 3,450 mm, etc. Subject to errors, prior sale, and typographical errors. For sale to commercial businesses and for export only. Test drive/inspection at TÜV Dekra or Iveco is possible!!!! On request, a new TÜV certificate can be provided!!!! All documents can be sent in advance via email or WhatsApp to check mileage, accident history, vehicle history, etc.!!!! WhatsApp!!!! !!!! Fg-40282 !!!! Key number 224!!!! Nodpfszkxbxjx Akcjld

Condition: good (used), Year of construction: 2022, functionality: fully functional, For sale: 1 x lightly used tent hall from HallGruppen: A tent hall, 40 meters long x 2 meters wide, with 2 doors at one end + 5 small doors (requires self-dismantling). Internal wall height 6 meters and peak height 8.2 meters. External wall height 7 meters and peak height 9.6 meters. Eurocode wind load: 24 m/s, terrain class I Anchoring with ground stakes or other method Weight of fabric: 900 g/m2 Fire class of fabric: B-s2,d0 Consequence class: CC1/KK1 Nlodpfezgccljx Akcsd Sales only to businesses (B2B) – price is net for export or + VAT – viewings welcome in Denmark – subject to errors and omissions Information about the manufacturer: “ Hallgruppen is a well-known supplier of tent halls and temporary structures, especially in the Scandinavian region. The company specializes in the supply of tents, halls, and related structures. Here are some key aspects of Hallgruppen's tent halls: • Large projects: Hallgruppen, for example, built a 30,000 square meter tent camp for a NATO exercise in Inner Troms. • Applications: The tent halls are used for various purposes, including temporary storage, accommodation, and events. • Product range: The range includes robust tent and hall solutions, including specialized constructions such as a 40x20 meter tent hall. • Market position: In addition to the Scandinavian region, the company is also active in the Baltic countries (Hallgruppen Baltics, SIA). Hallgruppen offers customized solutions for temporary space requirements in various industries.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2975/1999, functionality: fully functional, operating hours: 20,637 h, power: 48 kW (65.26 HP), input voltage: 400 V, pressing force: 100 t, stroke length: 820 mm, operating speed: 470 mm/s, reverse speed: 447 mm/s, table width: 1,000 mm, table length: 720 mm, table height: 950 mm, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 910 mm, oil tank capacity: 2,100 l, total length: 3,100 mm, total width: 2,300 mm, total height: 4,850 mm, overall weight: 17,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, The machine was used in single-shift operation for prototype production, with CNC 50 control, impact damping, drawing cushion force of 400 kN, stroke of 150 mm, drawing cushion area of 600x550 mm, and regular UVV inspections. Includes a light curtain and a mechanically adjustable depth stop. Features hydraulic die clamping. Dismantling and transport are not included in the price. Nledpfx Akozkrl Dscod