Used Homag I/O Module 32 for sale (82,123)

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: Rcedpfxjzina Ie Am Tjd - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, machine/vehicle number: 006574, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Rcedpfx Asvxxuxom Ted

Condition: used, machine/vehicle number: 007134, Type of edging: Thin edge, Thick edge, Solid wood Rcedpfjt Hmtzsx Am Tsd Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: used, machine/vehicle number: 008516, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Redpfx Aezbrn Iom Tecd Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, - 5-axis spindle DRIVE 5C+ 15kW - Working area: 4200x1550mm - Tool magazine: 14 positions Rcedpfsw Dv Hzex Am Tjd - Drills: 9x vertical, 2+2 horizontal - Chip conveyor - WoodWOP 6.1

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker Rcsdpezmrw Ssfx Am Ted 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: P260713249, The HOMAG SAWTEQ B-300 profiLine is a high-performance industrial beam saw designed for the precision cutting of coated and uncoated wood-based panels. Engineered for continuous production environments, it combines robust mechanical construction, high cutting performance, automated material handling, and intelligent digital control to maximize productivity while maintaining exceptional cut quality. Key performance features include a 3,800 mm cutting length, ±0.1 mm/m positioning accuracy, and a powerful 24 kW main saw motor with a 2.2 kW scoring saw, ensuring clean, chip-free cuts even on laminated materials. The saw carriage reaches feed speeds of up to 130 m/min, enabling short cycle times and high daily output. Material handling is highly automated through a 4-ton hydraulic lifting table, dual micro-feeders, automatic loading for thin panels, alignment units, and an optimized pusher system equipped with 11 lifting clamps. Air cushion tables with integrated air nozzles facilitate effortless panel movement while protecting sensitive surfaces from scratches. The machine is built around a heavy-duty steel frame with precision rack-and-pinion drives, maintenance-free measuring systems, and a patented central squaring system that reduces cycle times by up to 25% compared with conventional designs. The robust construction ensures long-term dimensional accuracy, minimal vibration, and excellent repeatability. Operation is managed through the PowerControl V2.1 system with a 24-inch Full HD multi-touch display, HOMAG powerTouch interface, CADmatic 5 software, integrated diagnostics, tool management, and network connectivity. The machine is also tapio Ready, enabling future integration with HOMAG's digital production ecosystem and Industry 4.0 services. Additional features such as ecoPlus energy-saving technology, automatic cutting height adjustment, optimized dust extraction, pneumatic saw movements, electric scoring saw adjustment, and remote diagnostics via TeleServiceNet further enhance machine efficiency, reduce operating costs, and simplify maintenance. Rcedezmglkepfx Am Ted Overall, the SAWTEQ B-300 profiLine provides an ideal solution for manufacturers seeking high productivity, precision, automation, and digital connectivity in industrial panel processing.

Condition: used, Year of construction: 2022, PANEL SAW Manufacturer: HOMAG Type: SAWTEQ B-200 Optimat HPL200/38/22 Rodpezkmrfefx Am Tecd Year: 2022 With loading system

Condition: used, machine/vehicle number: 006079, Max. panel width: 1200 mm Rodpou N Slvofx Am Tscd Max. panel length: 3200 mm

Condition: used, machine/vehicle number: 003935, Max Panel Width: 1200 mm Max Panel Length: 40 mm Max feed speed: 60 m/min Rcjdpfswucknsx Am Ted Operating Units: 3 nr

Condition: used, machine/vehicle number: 008148, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 210 AMBITION 2274 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 210 AMBITION 2274 Rcodpfx Amoxtugce Tjd

Condition: used, machine/vehicle number: 008146, Type of edging: Thin edge, Thick edge Rodpfx Amjw Tiv Ts Tecd Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Operating Units: 7 nr

Condition: used, machine/vehicle number: 007906, Position 1: Roller Conveyors HOMAG-PROFI KFL 350/10/A3/WZ Rodpfx Amswucm Aj Tocd Position 2: Single Edgebanders HOMAG-PROFI KFL 350/10/A3/WZ Position 3: Panel Return Systems HOMAG-PROFI KFL 350/10/A3/WZ

Condition: used, machine/vehicle number: 007956, Position 1: Roller Conveyors HOMAG-PROFI KFL 350/11/A3/WZ14 Rcedpfx Amewuudmj Ted Position 2: Single Edgebanders HOMAG-PROFI KFL 350/11/A3/WZ14 Position 3: Panel Return Systems HOMAG-PROFI KFL 350/11/A3/WZ14

Condition: used, machine/vehicle number: 006375, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Rcedpfep Apx Tsx Am Tsd Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Redpfx Asx Swf Uom Tjcd Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Rcodpfxjwd Itmj Am Tsd Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 005385, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Corner Rounding Unit: yes Rjdpfx Asg Iy Duem Tocd Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, Year of construction: 2018, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 0-250-11-2763, Used drilling center Optimat BHX 055 Built-in features: □ Horizontal drilling head with 4 spindles (X axis) □ Horizontal drilling head with 2 spindles (Y axis) □ Drilling head with 13 spindles □ Grooving saw D=100 mm (X direction) □ Pneumatic positioning stopper for workpiece alignment □ Workpiece clamping system Redsx Tz Shspfx Am Tjcd Units / Equipment: □ 10 kW milling motor with frequency inverter (HSK63) □ 4-position tool magazine □ WOODWOP 7 software Workpiece dimensions: □ Maximum: 3050 × 850 mm □ Minimum: 200 × 70 mm □ Material thickness: 12–60 mm General information: Year of manufacture: 2018 □ POWERCONTROL with POWERTOUCH system □ CE marking □ Condition: ready for operation / demonstration possible □ Availability: in stock Documentation: □ Language: Polish □ Documentation: paper + digital media

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, overall weight: 4,000 kg, TECHNICAL DETAILS Overall height: 2,200 mm Overall length: 7,500 mm Overall width: 1,500 mm MACHINE DETAILS Weight: 4,000 kg Year of manufacture: 2007 Voltage: 400 V Power consumption: 46 A Fuse: 63 A Transport dimensions: 7,500 mm x 1,500 mm x 2,200 mm (L x W x H) Transport weight: 4,000 kg EQUIPMENT Tools included: Yes (for 1st, 3rd, 4th, 5th, 7th, and 8th unit) Tools included: No (for 6th unit) Rcsdpfey Akytjx Am Tsd

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Rcedpfszgc U Uex Am Ted Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: used, Year of construction: 2012, power: 7.5 kW (10.20 HP), travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, number of slots in tool magazine: 12, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working area X 4000 mm Working area Y 1550 mm Working area Z 300 mm 1 milling spindle Main motor 7.5 kW Maximum speed 24000 rpm Tool clamping system HSK-F63 12 tool changer positions 17 vertical drilling spindles 2 horizontal drilling spindles X Rsdpjy S Edxofx Am Tecd 2 horizontal drilling spindles Y Grooving saw, 90° swiveling Edge banding unit Separate Y-axis Console table, 6 consoles Vacuum pump Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, In this offer you purchase a used "EMC Isilon X400 - 32 TB " Agility and Flexibility: EMC Isilon X-Series is the first scale-out storage solution capable of scaling throughput from a few terabytes to over 20 petabytes and over 100 gigabytes per second (GBps), all within a single file system. Sale item: 1 x EMC Isilon X400 - 32 TB + 400G SSD/ 48G/ 2x10GE SFP + 2x1GE with the following equipment: 3x32 TB HDD/400GB SSD 3.5" 3x48GB Ram, 12X4G 6x6 metre CX42QSFP Hybrid Cable 3x KIT 2SFP + Optic 10GB (ISO00125223, -227, -388) 2x QLogic 18 Port QDR Switch (CNVS491200146, CNVS491200150) 10 GBE, Dual-Port SFP + Without Optic Isilon Software Upgrade Enterprise Snapshot IQ Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been functionally tested and is equipped with the latest Isilon OneFS8 software. Rcjdpfx Aerxcvdem Tod Shipping is possible on request!

Condition: used, Year of construction: 2014, Modell: Brandt Optimat KDF 430 C Rcsdpszkd Nzjfx Am Tsd Production year: 2014 Feed speed: 11m/min Workpiece thickness: 8-60mm. Edge thickness: 0,4-8mm. Premilling unit: Yes Gluing unit: Yes, EVA End trimming unit: Yes Fine trimming unit: Yes Corner rounding unit: Yes Profile/Glue srapper: Yes Buffing unit: Yes

Condition: used, Year of construction: 2011, machine/vehicle number: 0-201-50-1289, operating hours: 7,062 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,400 mm, controller model: POWERCONTROL PC 85, plate height: 300 mm, spindle speed (max.): 24,000 rpm, CNC machining center for milling, drilling, and edge banding! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 1,400 mm Maximum panel passage height: 300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Number of controlled axes: 5 axes Number of working stations: 4 Maximum edge height: 65 mm Number of drilling units: 1 Total number of drilling spindles: 21 Total number of vertical + horizontal spindles: 25 Number of milling spindles: 2 Total number of tool changer positions: 77 Barcode reader model: DATALOGIC Work table and workpiece clamping Number of rails: 12 Number of pumps: 1 Flow rate of vacuum pump: 300 m³/h Positioning via NC Vacuum suction cups for workpiece clamping Positioning of vacuum suction cups via NC Drilling unit Drilling unit 1: Top Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Total number of vertical + horizontal spindles: 25 Milling units Milling spindle 1: Top Number of controlled axes milling spindle 1: 5 Motor power milling spindle 1: 15 kW Speed milling spindle 1: 24,000 rpm Automatic tool change Milling spindle 2: Top Number of controlled axes milling spindle 2: 4 Automatic tool change milling spindle 2: Yes Motor power milling spindle 2: 11 kW Speed milling spindle 2: 12,000 rpm Edge banding unit Number of edge banding units: 1 Maximum panel height: 60 mm Model: POWER EDGE 360° Positioning: Mounted on the main beam of the machine Number of positions edge band roll magazine: 2 Gluing unit Glue tank for hot melt adhesive Pre-melter for hot melt adhesive Tool magazines Number of tool magazines: 4 Positions tool magazine 1: 72 Position tool magazine 1: At the rear of the machine Positions tool magazine 2: 2 Position tool magazine 2: At the rear of the machine Positions tool magazine 3: 2 Position tool magazine 3: At the rear of the machine Positions tool magazine 4: 1 Use tool magazine 4: Only for saw unit D: 350 mm MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: POWERCONTROL PC 85 EQUIPMENT Work table pod and rail NC-positioned workpiece clamping Vacuum suction cups Vacuum pump Drilling unit on top 2 milling spindles POWER EDGE 360° edge banding unit Glue tank for hot melt adhesive Rcodoy Uviwepfx Am Tod Pre-melter for hot melt adhesive Edge band roll magazine 4 tool magazines Barcode reader DATALOGIC Protective screen Chip conveyor CE marking Safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8527