Used Koch Sbd-60-Ptp for sale (21,030)

Year of construction: 1995, condition: reconditioned (used), multi-spindle drilling machine Koch 25 automatic spindle drill spacing 32 mm setting in the X and Y axes and using a ruler. The machine has been overhauled. Machine type SPRINT Hedpfx Aljkytcfo Iel 4kW motor. cylinder stroke 300 mm year of manufacture 1995 machine complete and ready to work Heads 25 spindeln pins size width between pins 32 mm standard

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Hjdewc Afhjpfx Al Iol Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: like new (used), Year of construction: 2008, volume flow: 3,700 m³/h, power: 2.1 kW (2.86 HP), input frequency: 50 Hz, Systemair KTEX 60-35-4 Atex fan 2.1kw 3700m3 duct mount KTEX fans feature a compact, streamlined design, high-performance forward-curved radial impeller and reliable ATEX-rated AC motors. power 2.1 Kw Hedpfxevu Hrkj Al Iel Voltage 230/ 400V 50Hz 5.8/3.8A IP44 power 2.1 KW Air flow max 3.704 m³/h Pressure: 580 Pa Impeller rotation: 1.392 rpm Air flow max 3.704 m³/h Minimum static back pressure 225 Pa Conveyed air temperature max 40 °C Maximum temperature of the conveyed air when speed is controlled 40 °C Insulation class F Explosion-proof designation II 2 G Ex eb h IIB+H₂ T3 Gb Certificate Presafe 17ATEX9970X Ambient and pipe temperature -20 to 40 °C Dimensions and weights inlet (height x width) 350 x 600 mm outlet (height x width) 350 x 600 mm Weight 42 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, stroke adjustment: 75 mm, Equipment: documentation/manual, safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Hsdpfxsu Hav Rj Al Ijl required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, ram adjustment: 75 mm, stroke adjustment: 75 mm, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD Hjdpfx Aeu Hautol Iel type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: excellent (used), Year of construction: 2003, Conveyor devices Cook Type 603 Hsdpfx Aljmxkmxs Isl Year ca,2003

Condition: used, Year of construction: 1984, CNC Milling Machine Heckler & Koch BA 20 CNC Manufacturer: Heckler & Koch (Germany) Type: Vertical CNC Machining Center (Milling Machine) Control system: Depending on the version – Siemens, Heidenhain, or proprietary HK system (the photos show a panel with a monitor and traditional keyboard, most likely Heidenhain or Siemens Sinumerik control). Worktable: typically 2000 × 500 mm (designation BA 20 = 2000 mm table length) Working travels (X/Y/Z axes): X: approx. 2000 mm Y: approx. 500 mm Z: approx. 500–600 mm Hjdpjw Uac Hjfx Al Iol Spindle power: usually 10–15 kW Spindle speed: up to approx. 6000 rpm (depending on the version) Tool holder: SK40 or SK50 (SK40 holders visible in the photos) Tool magazine: usually 16–20 tools Cooling: via external coolant nozzle (flexible blue pipe visible in the photos) Total weight: approx. 6–8 tons Power supply: 400 V, 50 Hz, connected load approx. 20–25 kVA Applications: - Production of medium-sized metal parts - Defense, machinery, and automotive industries - Suitable for batch and single-piece production Equipment: control panel, keyboard, mouse, vices, guards 📌 Applications: - Metalworking - Batch and single-piece production - Metalworking shops, manufacturing plants

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). Hjdpfxerfucfj Al Isl 1 x HIGHYAG LASER WELDING HEAD. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Year of construction: 1997, condition: good (used), I sell the multiple drilling machine with inserting KOCH WinDoor Hedjfyn Tyjpfx Al Iol Year: 1997 Number of drilling spindles 1 (suitable for dowels 8x60mm) Number of inserting heads 1 Motorical axes adjustment Workpc. length 200-3500mm Workpc. width 20-200mm Workpc. height 30-100mm Available immediately

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm No of Top Units: 2 Hsdpfsg E Th Sex Al Isl Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008343, Max. panel width: 70 mm Hsdpsx A Tl Nofx Al Iel Lateral horizontal groups: yes

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Hjdpjy Hki Aofx Al Iel Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm Hsdpfey Du N Usx Al Ijl MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: used, This listing is for Agilent Carey 60 UV-Vis Spectrophotometer The unit is in full working condition and ready for immediate use UV-Vis spectrophotometer designed for accurate absorbance and transmission measurements in research and QC laboratory environments. Transparency Report and Technical Audit: Hedoy Hrlfopfx Al Ijl Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 11/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods Hodpfx Alsy H U Ico Ijl FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels Spare wheel (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets TrailerConnect S.KO COOL country package wave 3

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: Hjdpfx Aovn Tg Ijl Iel The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor Hsdeviwdmspfx Al Isl 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 04/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Hodpfx Aljywtxuo Ijl Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: ready for operation (used), Specifications of NEUE Herbold SB 60/145 S7-3 Motor Power: 70kw Feed Opening: (approximately 620 mm x 565 mm) Rotor Configuration: 5-knife open rotor staggered Bed Knives: 2 Installed Screen: 3/16" (approximately 4.76 mm) Additional Equipment: Control panel with soft-start feature Voltage: 460V / 3-phase / 60 Hz Hedpfx Asw R Un Ajl Iel Extras: Includes seven extra screens We supply a wide range of granulators designed for plastics recycling, manufacturing, and waste reduction. Whether you need compact units for light-duty use or heavy-duty machines for high-output production, we have the right solution.

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: ADVU-50-60-APA -Piston: Ø 50 mm -Piston rod: Ø 16 mm -Stroke: 60 mm -Max. Pressure: 10 bar -Price: per piece Hedpfx Aljd S Dafo Isl -Number: 2 pieces -Dimensions: 137/70/H70 mm -Weight: 1 kg

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 06/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Hsdpfx Aljyvfzkj Ijl Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: good (used), workpiece weight (max.): 80,000 kg, grinding diameter: 1,580 mm, grinding length: 7,500 mm, Manufacturer: Farrel Type: 60" x 24" Heavy Duty Year of manufacture: 1960 Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Specifications Metric US Standard Center height 930 mm Grinding diameter Ø 1860 mm Grinding length 7500 mm Grinding stone dimensions 1080 x 180 mm Grinding stone speed 400 - 100 rpm Tailstock 260 x 1250 Mk Coolant system Yes filter Yes Dimensions (estimate) length 13200 mm width 4250 mm height 3200 mm weight 80000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Share on Hedper Ikvmofx Al Iol download Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanges / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930mm Grinding diameter Ø: 1860mm Grinding length: 7500mm Grinding stone dimensions: 1080 x 180mm Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 13200mm Width: 4250mm Height: 3200mm Weight: 80000kg Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930inch Grinding diameter Ø: 1860inch Grinding length: 7500inch Grinding stone dimensions:1080 x 180inch Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 519.684inch Width: 167.323inch Height: 125.984inch Weight: 176449.6lbs Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,298 h, load capacity: 4,000 kg, lifting height: 4,650 mm, free lift: 1,700 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, battery capacity: 930 Ah, battery voltage: 80 V, DGUV certified until: 04/2027, fork length: 1,500 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 Electric Forklift with the following specifications: Hedsywd Awepfx Al Iel - Operating hours: 3,296 - Lifting capacity: 4,000 kg - Lifting height: 4,650 mm - Overall height: 2,350 mm - Year of manufacture: 2012 STILL 4.0-ton electric forklift with semi-cab, battery from 2019, non-marking tyres (new at the rear), triplex mast with full free lift, side shifter, 4th hydraulic valve, four-lever control, road-legal lighting (StVZO compliant), 1,500 mm fork length, and charger included. Price includes service according to STILL manufacturer specifications and valid UVV safety inspection upon sale. The following options are available at additional cost: - Full cab - Other attachments (fork positioner, rotator, etc.) - Different fork length Viewing, demonstrations, and test drives available by prior telephone arrangement. Sale exclusively to businesses. Subject to prior sale, errors, and typing mistakes. We can deliver your new forklift cost-effectively with our own low-loader ramp trailer (transport costs upon request). For further information and offers, please visit our website.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 12/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Hedpfoyuf E Tjx Al Iel Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels Spare wheel (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets TrailerConnect S.KO COOL country package wave 3

Condition: used, Year of construction: 2002, Suitable for automatic grinding of all types of tools. Accessories: Total enclosure Knoll E53319 bandfilter system Numrotoplus software Numroto software for simple milling cutters and cords, Numroto software for simple and complex drills Hodpfx Asyv Hv Rsl Iol Pallet loader CNC handwheel Control cabinet cooler, automatic tailstock automatic central lubrication Glass scales on the X, Y, Z linear axes Measuring probe Hydraulic workpiece clamping Oil collection tray 2 loading pallets, 1 grinding wheel holder. X axis travel: 800 mm Y axis travel: 270 mm Z-axis travel: 660 mm B axis travel: 400 ° Rapid traverse: 30/15/30 m/min Workpiece mount: ISO 50 Tool holder cone: ISO 50 Grinding spindle drive power: 12 kW Grinding spindle speed stepless: max. 9000 rpm, Grinding wheel diameter: max 203mm Connected load approx.: (400V/50Hz) Dimensions L x W x H: 1900 x 2300 x 2300 mm Weight approx: 5400 kg Colour: Grey / yellow