Used Labeling And Date Printing for sale (13,269)

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Ncedpfjvy Aipjx Agpou Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Capacity of peeled product depending of onion size: Pjtx Eswb Uuxodn Dorc Nedexta U Eopfx Agpjcu 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Machine is fully stainless steel ! Very little used after full service ready to work, we help you with technical support and with spare parts ! Machine require air screw compressor min 2700 l/m 5-8 bar We can help configurate your factory!

Condition: good (used), Letterpress printing press, foot operated Made in Germany Njdpfxsvac S De Agpecu Fully original machine. A brilliant looking exhibit to put in a company lobby. A manually added piston. Rollers Format of the pressure 35x24cm

Condition: ready for operation (used), D&K System Jr. Year 2006 Format max 68x76 cm Format min 20x28cm Till 500 gsm can work Single Sided Thermal Film Laminator Accufeed Jr. Automatic Sheet Feeder, Acculam Jr. Laminator, Ncjdpfx Agowhcfxjpsu Accu-III Jr. Automatic Sheet Separator, Jogger Catch Tray Delivery

Year of construction: 2019, condition: used, functionality: fully functional, Used decorative galvanizing line Njdey Hcmtepfx Agpecu NICKEL CHROME The line consists of 19 tanks with dimensions 3m x 1.2m x 1.4m (4.5 tons) 1 dryer with 2 motors 2 transformers 12V–15V, 1200A 1 transformer 12V–15V, 4000A 1 oil transformer 2 pumps with a voltage of 400V (three-phase) and a power of 1.5 kW If required, we can also offer a water treatment (purification) line, and the line can also be used as a plant for DEMI water production.

Condition: excellent (used), functionality: fully functional, Line of Quenching and Tempering Furnaces Bought new in Asia rebuilt with German technology Dephosphating washing machine Ncsdpfxet Ty Sds Agpsu Automatic weighing to dose the load Software with batch traceability management New thermal insulation on top, bottom and walls New refractory stainless steel mesh belt New Ceramic Recuperative Burners from IBS General retrofitting for electrical panels and automation Mainly is used to quenching and tempering, fasteners, nuts and special parts for automotive industry Class 8.8, 10.9 and 12.9 Capacity: 1.000 kg/hour Possibility to load, transport and install the line at your facilities Price to be agreed

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Ncsdpfx Ajhg Rcxegpeu Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: good (used), Fuchs Terex MHL430 machine for sale. The machine is from 2002. Ncsdpfxspq R Sxo Agpju Liebherr 924 Litronic machine for sale. The equipment is from 2007

Condition: used, High-capacity funicular mounted on a MAN 6x4 chassis truck - Maximum working length, line of 2,000 m - MAN 400 CP truck chassis - 12 m tower equipped with 6 hydraulic anchors - Possibility of mounting the funicular in the lower position (valley) or in the upper position (mountain), in other words, the funicular can pull logs from top to bottom or from bottom to top - Trolleys with 50 m cable reserve (for easy manipulation), verbally activated with remote control station + 2 additional Trolleys - Various spare parts - The machine is registered in Romania and can be driven on public roads - Good working condition. It was used very little. Purchased from the Austrian Forestry Directorate. Njdpfet Nf Ipex Agpjcu Installation in very good working condition. Belwo you can find our offer for VOLVO L180E. For this machine, no professional description is needed, as you can see all the details in the attached photos.

Condition: new, functionality: fully functional, fuel type: hydrogen, color: other, Year of construction: 2026, Equipment: cabin, The fixed sand washing and screening plant is an advanced system designed for the high-efficiency separation and cleaning of natural sand and gravel. Developed with CONSTMACH engineering, these plants can be customized according to different production capacities, final product sizes, and washing requirements. Thanks to the plant's modular design, it can be easily integrated into any project area with different layout plans. It offers flawless washing performance with options such as a high-vibration feed bunker, a washing nozzle vibrating screen, and a helical or bucket washer. The hydrocyclone system ensures maximum efficiency in separating fine material. Furthermore, thanks to the PLC-controlled automation system, all processes are managed from a single point, minimizing the margin of error. CONSTMACH stationary sand washing and screening plants are equipped with SIEMENS and SCHNEIDER brand electronic components, offering long-term use and high durability. With these features, they are an ideal solution for companies that want to maintain high quality standards in aggregate production. Stationary Washing and Screening Plant Technical Specifications Production Capacity: 100 – 250 t/h Maximum Feed Size: 200 mm Feed Height: 4.5 meters Main Configuration: Feed Bunker + Washing Nozzle Vibrating Screen + Helical Washer / Bucket Washer / Dewatering Screen and Hydrocyclone + Conveyor Belts Total Motor Power: Varies according to production capacity Electric Generator Requirement: Varies according to production capacity Weight: Varies according to production capacity Why Should You Choose CONSTMACH Stationary Washing and Screening Plants? CONSTMACH combines its long-standing engineering experience in washing and screening technologies with high quality standards. All systems provide long-term use with low maintenance costs thanks to their durable steel construction and energy-efficient motors. In addition, with project-based customization options, it offers full compliance with each customer's production goals. Thanks to its superior service network and fast spare parts supply, CONSTMACH plants preserve the value of your investment in the long term. What Does Constmach Do? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Nodpfx Agexpxqqjpecu

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Nodpfowhvq Iex Agpjcu Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. Nedpjwqcrqefx Agpocu - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 401 Aluminyum Pvc Alttan Çıkma Kesim Makinası, functionality: fully functional, • Complies with CE standards. • Performs precise cutting at 0 - 180 degrees and intermediate angles. • Quick setting stops for 15, 22.5, 30, 45, 60, and 90 degree angles. • Table locking lever for intermediate angles. Nsdpoq U Tctofx Agpscu • Saw output speed regulator reduces speed when cutting aluminium, decreasing motor load. • Safety guard for secure cutting. • Diamond saw blade diameter: 450 mm, output distance: 12.5 cm. • Standard with measurement and transport conveyor (2.5 metres right and left). OPTIONAL • Cooling system and Hydro check system available for aluminium cutting. • Capability to work with a digital meter.

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, We offer these ready-to-use AUMA actuators and JC Spain gate valves, 10" to 42" gate valves with actuators, model "Valves for Oil Industry," year of manufacture 2016. High-performance gate valves Sizes: 10" to 42" Pressure class: 600 lbs, Stellite 6 hardfacing and 13% Cr trim (internal parts) BWE (butt-weld ends), wedge type gate valve, bolted bonnet, OS&Y ASTM A-216 WCB (cast carbon steel) The majority of units are equipped with explosion-proof, intelligent AUMA AUMATIC ExC actuators. Optionally, we can refurbish the actuators and gate valves and provide a factory acceptance test (FAT). Actuator manufacturer: AUMA Riester GmbH & Co. KG Model: 10" to 42" gate valves with actuator - 42" gate valves (2 units): equipped with AUMA SAEX 30.1 actuators. - 32" gate valve (1 unit): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (4 units): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (2 units): handwheel (can be fitted with actuators). - 16" gate valves (9 units): equipped with AUMA SAEX 14.6/GK30.2 Germany actuators (Ex-proof). - 10" gate valve (1 unit): handwheel Location: Ras al Khaimah, UAE Ncodpfx Agsy D Ilijpju If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Nsdpoq Nx Aljfx Agpscu Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Ncodoh Uyg Njpfx Agpju

Condition: used, SAF Column and Boom approx 8 m high column and 8m boom. with Nertamatic 450 Conrol. Nedpfx Agjzgxg Hspscu

Condition: excellent (used), Year of construction: 2017, Ref: 11038 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. Ncedpfx Agoxyxr Njpsu 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: used, Year of construction: 1998, functionality: unexamined, 1ST MACHINE TOSH S.R.L. TOSH LOGICA 200 Industrial Pad Printing Machine – 1998 Heavy-duty industrial pad printing machine manufactured by TOSH S.R.L. Italy, designed for precision multi-application tampography and industrial component printing. The LOGICA 200 is a larger-format automated pad printing system suitable for demanding production environments requiring accurate and repeatable print registration across industrial products and components. Machine Details Manufacturer: TOSH S.R.L. – Italy Model: LOGICA 200 Year of Manufacture: 1998 Serial Number: 07980248 CE Marked Industrial pneumatic/electronic operation Features Large-format pad printing system Enclosed guarded print area Heavy-duty industrial construction Integrated electronic controls Precision shuttle/work table Pneumatic print head operation Adjustable tooling/fixture platform Industrial production capability Applications Ideal for: Automotive component printing Industrial product branding Promotional product manufacturing Electronics housings Plastic moulded parts Technical component marking High-volume tampography operations Condition Used industrial condition with cosmetic signs of workshop use and age-related wear. Machine removed from working production environment. Electronics and control boards remain installed. Included TOSH LOGICA 200 machine Installed control system Integrated work table/shuttle assembly Safety guarding Ncodsy Shxfjpfx Agpju Components and fittings shown in photographs Shipping & Inspection Loading assistance available. Inspection welcome by appointment. Worldwide shipping can be arranged at buyer’s cost 2ND MACHINE Kent Pad Printer Canada Inc. KENT Pad Printer – Industrial Pneumatic Pad Printing Machine Industrial pad printing machine manufactured by Kent Pad Printer Canada Inc., suitable for precision tampography and component marking applications. Compact and robust pneumatic-operated system designed for reliable industrial printing onto plastics, metals, promotional products and engineered components. Machine Details Manufacturer: Kent Pad Printer Canada Inc. Machine Type: Pad Printer Voltage: 230V / 50–60Hz Power: 30W CE Marked Pneumatic operation Bench/floor mounted industrial unit Features Industrial pad printing system Adjustable print table/work platform Pneumatic print head operation Safety guarding installed Electronic control interface Compact production footprint Heavy-duty cast construction Suitable for repetitive production work Applications Ideal for: Promotional product printing Plastic component marking Automotive parts printing Electronics branding Industrial product coding Small parts tampography Batch production environments Condition Used industrial condition with visible cosmetic wear from workshop use. Machine appears complete with controls, guarding and pneumatic components installed. Included Kent pad printing machine Installed control panel/interface Adjustable work table Safety guards Foot pedal/control accessories shown Components visible in photographs Shipping & Inspection Inspection welcome by appointment. Loading assistance available. Worldwide shipping can be arranged at buyer’s expense.

Condition: used, input voltage: 230 V, Teca-Print TPX 500 industrial pad printing machine. Professional industrial pad printer used for printing onto plastics, components, promotional items and industrial products. Machine details: Model: TPX 500 Manufacturer: Teca-Print AG 230V supply Pneumatic operation Adjustable print table Industrial production machine Suitable for: promotional product printing industrial component marking plastics printing product branding manufacturing environments Nodoy Sgxqepfx Agpscu Previously used in commercial production environment. Condition: Sold as seen / untested. Inspection welcome. Buyer responsible for removal and transport.

Condition: used, Year of construction: 1996, functionality: fully functional, 1ST MACHINE TOSH S.R.L. TOSH LOGICA 150 Pad Printing Machine – 1996 High-quality Italian-built industrial pad printing machine manufactured by TOSH S.R.L., designed for precision printing applications across plastics, metal, engineering and promotional product industries. Machine Details Model: LOGICA 150 Manufacturer: TOSH S.R.L. – Italy Year of Manufacture: 1996 Serial No: 02960-05 Nsdpfx Agey Shdzepscu CE Marked Pneumatic operation Digital programmable control panel Heavy-duty industrial frame Features Precision pad printing head assembly Adjustable work table and fixtures Electronic programmable controls Industrial pneumatic system Compact production footprint Foot pedal operation included Access to internal electronics and service panels Suitable Applications Promotional products Automotive components Plastic mouldings Industrial part marking Electronics branding Engineering components Condition Used industrial condition with cosmetic wear consistent with age and factory use. Removed from operational environment. Sold as seen in photographs. Included Machine base unit Control system Pneumatic connections Foot pedal Installed fixtures/components shown in images Shipping & Viewing 2ND MACHINE TOSH S.R.L. TOSH LOGICA 150 with PS160 Shuttle – Industrial Pad Printing Machine Heavy-duty industrial pad printing system manufactured by TOSH S.R.L. of Italy, fitted with PS160 shuttle table assembly for precision multi-position printing applications. Designed for continuous industrial production environments, this machine combines robust mechanical construction with programmable electronic controls for accurate repeat printing on engineered components and manufactured products. Machine Details Manufacturer: TOSH S.R.L. – Italy Model: LOGICA 150 Shuttle System: PS160 Year: 1996 CE Marked Pneumatic operation Digital programmable control panel Industrial steel base construction Features PS160 shuttle worktable system Adjustable printing fixture platform Precision tampography head assembly Electronic programmable controls Dual foot pedal operation Accessible rear electronics cabinet Compact industrial footprint Heavy-duty production frame Applications Condition Used industrial condition with cosmetic signs of workshop use and age-related wear. Machine removed from working environment. Electronics and internal control hardware present as photographed. Included TOSH LOGICA 150 machine PS160 shuttle assembly Control panel Foot pedals Pneumatic fittings Fixtures/components shown in images Shipping & Inspection 3RD MACHINE TOSH S.R.L. TOSH LOGICA 01 Shuttle Pad Printing Machine – 2011 Modern compact industrial pad printing machine manufactured by TOSH S.R.L. Italy, fitted with Shuttle L190 system for accurate and repeatable component printing operations. Machine Details Manufacturer: TOSH S.R.L. – Italy Model: LOGICA 01 Shuttle System: Shuttle L190 Year of Manufacture: 2011 Serial Number: D04 CE Marked Electrical Supply: 220–240V Frequency: 50/60Hz Power: 0.3 kW Weight: Approx. 180kg Features Compact shuttle pad printing system Precision print head assembly Safety guarding and CE compliance Foot pedal operation Adjustable fixture platform Modern control interface Pneumatic industrial operation Compact production footprint Applications

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Nedpfx Asyvav Negpecu

Condition: good (used), Several hundred retort trolleys with trays. Lovely condition. Ncedpfxer Iyu To Agpeu

Condition: new, Unused bin washer. Bought for a contract which never materialised. Nsdpfx Aotpv T Njgpecu

Condition: good (used), Handtmann VF628 vacuum filler with PVLS143 high speed linker cutter from 2021 and GS300 auto tray loading system consisting of GM310 and ZB311. Rarely available. We can offer an additional similar setup with VF622 instead of VF628. Nsdpfxsvvxumj Agpecu