Used Leadermac 6 Spindle Fourside Moulder Pre-Surface for sale (66,690)

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm Hjdpfein Ub Tjx Acrol number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: used, used Manufacturer: Schneider Model: SK 1/2 Machine number: 10144 GS-tested Motor: 5.5 kW Tiltable from -5° to +45° Motor brake Motor with 2 speeds / pole-changeable 6 speed settings: 4000/5000/6000/8000/10000/12000 rpm Right and left rotation Hedow Dgbijpfx Acrjl Table size: 1150 mm x 850 mm Spindle diameter: 30 mm Spindle fence with fine adjustment Control panel Extraction port D 100 / 120 mm Required space approx. 1600 mm x 1200 mm x 1500 mm Weight approx. 1000 kg Total connected load 5.5 kW Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition No guarantee or warranty

Condition: used, with 7 spindles used Machine inspected, test run performed Adjustments checked, lubricated Manufacturer: Hemag Type: Milling Rotor 190 Machine No.: 703134 Motor: 7.5 kW Mechanical brake 3 speed stages Forward and reverse operation Hedpowrtldjfx Acrel Spindle: 7 units Spindle diameter: 30 mm Max. tool diameter with fence: 210 mm Max. tool diameter in machine: 140 mm Table size: 1300 mm x 1050 mm Extendable frame support Milling fence with fine adjustment Extraction connection D 120 mm Required space approx. 1300 mm x 1100 mm x 1200 mm Weight approx. 1100 kg Total connected load: 7.5 kW Location: 97447 Gerolzhofen, free loaded, unpacked Handover in current condition as inspected, without guarantee or warranty.

Condition: new, Main motor with 7.0 kW (S6) and automatic star-delta switching Reverse rotation direction with electrical interlock during switching Fixed milling fence with aluminum rulers (version with electrical safety devices) complete with extraction hood (max. tool diameter 240 mm) Interchangeable milling spindle Controls on the front side Electrically adjustable spindle height and tilt Electrical pre-wiring for power feed unit (CE version) with table extension: 2,500 x 1,200 mm (length/width of milling table, incl. extension and workpiece support) Operating hours counter Technical data: Power 7 kW Working table dimensions (extendable workpiece support) 2500 x 855 mm (1200 mm x 855 mm) Spindle diameter 30 mm Spindle tilt 0-45° Spindle clamping length 90 mm Tool diameter under table 240 mm Spindle base protrusion from table 38 mm Spindle speeds 3500/6000/8000/10,000 rpm Extraction port diameter 120/120 mm Hodpfxoxnqx Ds Acrjl

Condition: new, Robust craftsman’s machine with a spindle moulder tiltable 45° on both sides and MK4 interchangeable spindle. Stable steel and cast iron construction. Dynamically balanced milling unit anchored to the worktable. Exceptionally robust build. Smooth operation due to precision components and high intrinsic weight. Standard features include reversible rotation (left/right) with electronic interlock when changing direction. Five speeds from 3,000 to 10,000 rpm. Speed change is operated easily and conveniently from the machine's side. Comes as standard with MK 4 interchangeable spindle system. Large grey cast iron worktable for sustained precision. Easy handling via controls and speed display on the machine's front. Large-dimensioned milling fence with fine adjustment and aluminium fence jaws included as standard. Fence adjustment via hand crank with numerical digital display of spindle height in 0.1 mm increments. Powerful industrial motors. Delivery includes: Technical Data: Dimensions and Weight: Weight (net): approx. 510 kg _____ Dust Extraction Connection: Extraction port diameter fence: 1 x 120 mm Extraction port diameter machine: 2 x 80 mm _____ Worktable: Worktable length: 2,500 mm Worktable width: 810 mm Table height: 923 mm _____ Setup Information: Space requirement details: dimensions take into account maximum travels or working lengths. Working area length: 3,700 mm Working area width/depth: 5,000 mm Note: Please add these working area dimensions to the space requirement to determine the recommended free installation area for the machine. _____ Equipment: Milling fence: heavy-duty professional design with aluminium fence jaws and fine adjustment, adjustable from the front via hand crank with numerical digital display. Arc milling safety guard: YES Spindle height adjustment: manual Spindle tilting adjustment: manual Control: manual height and angle adjustment of the milling unit Position of controls: on the machine body Table features: table extension left and right and pull-out workpiece support (total width 2,500 mm) _____ Electrical Data: Supply voltage: 400 V Mains frequency: 50 Hz Drive motor power: 7.0 kW _____ Milling Spindle: Spindle tilt: -45 to +45 ° Usable spindle length: 140 / 180 mm Clarification of usable spindle length: for spindle Ø 30-35 / for spindle Ø 40-50 mm Milling spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm Hsdexnqx Ropfx Acrel _____ Max. milling tool diameters: Max. sinkable tool diameter: 320 x 60 mm Max. profile milling diameter: 250 mm Max. tenoning diameter: 350 mm Max. contour milling diameter: 160 mm

Condition: used, Year of construction: 1980, machine/vehicle number: 18.742, Table milling machine with rigid milling spindle Hjdpfoul Sfmox Acrel Table size 1,920 x 900 mm, Motor 6/8 kW (8/11 HP), 4 speeds 3,000/6,000/4,500/9,000 rpm, Milling arbor D = 30 mm with Morse taper MK 5, weight approx. 700 kg, ex location Seevetal, Sale in "as is" condition as inspected, without transportation, subject to prior sale

Condition: new, Year of construction: 2025, machine/vehicle number: 6939, functionality: fully functional, Fimal Swing Spindle Moulder TX 160 "Partnership Edition" Fence including parallel adjustment with handwheel and digital readout, Handwheel adjustment with digital readout for front fence jaw, Electric travel swing mechanism for the complete fence, Quick-release lever for locking, Aluminium fence jaws and pressure device, curved fence, Electromotive spindle height adjustment, including digital display and decimal impulse setting, Table insert adjustable to the milling tool diameter (instead of table insert rings), Indicator lights for the selected spindle speed, Electrics and safety devices according to CE standards, Table dimensions: 2,500 x 780 mm, Spindle: diameter = 30 mm, height = 140 mm, Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm, Max. tool size under table: diameter = 320 mm, height = 50 mm, Motor: 7.5 kW / 10 HP, 400 Volt, 50 Hz, Including automatic star-delta switch, Hjdpfx Aovlw Idecrel Sound level according to EN 27960: 83.9 – 87.3 dB(A), Spindle tilt: -45° to +45°, Electromotive spindle tilt adjustment including electronic readout and decimal impulse setting, "Partnership Edition" complete with: "L" version with bilateral table extension and pull-out workpiece support with EMERGENCY STOP button, Upper control panel including electronic display, Swiveling mounting plate for feed device, mounted on the vertical column of the upper control panel, Socket for feed device, Forward/reverse rotation in accordance with CE standards, Prepared for installation of AIGNER integral fence jaws, Available ex-location Seevetal, without pre-carriage, freight, or commissioning, As inspected, subject to prior sale.

Condition: used, used, in good condition, low running hours Manufacturer: Bäuerle Model: SFM 2 Machine No.: B1533 Tiltable from -5° to +45° Mechanical brake 6 speed levels: 2800/4500/5600/9000/6000/12000 rpm Reversible (right/left hand rotation) Table size: 1100 mm x 900 mm Spindle diameter: 30 mm Cast iron fence jaws Cutter fence with fine adjustment Extraction port D 120 mm Required space approx. 1100 x 1100 x 1200 mm Weight approx. 1000 kg Hjdpfx Ajycxg Hjcrel Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, without any warranty or guarantee

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Hjdpfx Ajyfxa Eecrsl

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1240x710x1200 mm Hodpfx Acjv A Hilsrol Weight 225 kg Total power requirement 2,8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Hjdpfx Asv A Hifscrjl Weight 530 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Hsdjv A Hhzspfx Acrol Weight 190 kg Total power requirement 2,8 kw

Condition: new, functionality: fully functional, input voltage: 400 V, rotational speed (max.): 9,000 rpm, rotational speed (min.): 1,800 rpm, table width: 360 mm, table length: 1,000 mm, overall weight: 218 kg, Equipment: CE marking, Smooth and effortless movement of the sliding table carriage ensures easy and convenient processing of large workpieces. A robust spindle moulder safety hood with precisely adjustable aluminium limiting rails guarantees accuracy and operational safety. The electronic display allows for quick and legible spindle speed readings. The equipment includes a tilting fence with an eccentric tensioner for stable material guidance. The dynamically balanced spindle ensures exceptionally quiet and smooth performance. Spindle speed changes are quick and convenient via the poly-V belt. A stable outrigger table (optional) allows processing of large components without the need for additional support. All aluminium parts (sliding table, fences, etc.) are anodised, increasing durability and resistance to corrosion. The large spindle moulder unit, made from cast iron and tiltable from +5° to -45°, ensures versatile application. The backward tilting spindle offers added benefits – better utilisation of feed, maximum safety, and precise machining. Technical specifications: Table size - width: 1000 mm Hjdjyt I Egjpfx Acrel Table size - depth: 360 mm Sliding table length - format/roller: 1000 mm Sliding table width - format/roller: 240 mm Sliding carriage type: Sliding table Outrigger table dimensions (optional): 600 x 410 mm Working height: 895 mm Spindle diameter: 30 mm Tilt range of spindle: +5° to -45° Spindle height adjustment: 100 mm Clamping length: 100 mm Max. tool diameter: 200 mm Max. retractable tool diameter: 180 mm Table opening: 200 mm Spindle speed min.: 1800 rpm Spindle speed max.: 9000 rpm Number of speed settings: 4 (1800 / 3000 / 6000 / 9000) Extraction port diameter: 100 mm Motor power: 3.9 kW Motor power S1 100%: 2.8 kW Voltage: 400 V Dimensions - width: 1240 mm Dimensions - depth: 710 mm Dimensions - height: 1200 mm Weight approx.: 218 kg

Condition: excellent (used), Year of construction: 2015, WEINIG POWERMAT 1200 (6 SPINDLE) YEAR 2015 WIDTH 230MM HEIGHT 160MM ALL SPINDLES 8000 RPM ALL SPINDLES 50MM SHORT INFEED TABLE 1: BOTTOM 7.5 KW 2: RIGHT 7.5 KW 3: LEFT 7.5 KW 4: TOP 15 KW 5: TOP 15 KW 6: BOTTOM 11 KW CNC AXIAL CONTROL ON SPINDLES 3, 4 AND 5 40 M/MIN+ ELECTRIC. FEED 7 x DRIVEN TOP FEED ROLLERS 3 x DRIVEN BED FEED ROLLERS ANTI-KICKBACK DEVICE AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS Hsdpfx Ajyub Dxecrjl DIMENSION: APPR 3400 X 2000 X 1800 MM WEIGHT: APPR. 4500 KGS DUSTHOODS: 6 x 140 MM DIAMETER DUST MANIFOLD INCLUDED POSSIBLE TO SUPPLY WITH MOULDER INFEED AND DROP LEAF OUTFEED POSSIBLE TO SUPPLY TOOLING IF NEEDED

Year of construction: 2017, condition: like new (used), I sell the moulding heads for the automatic fourside moulder WACO Weinig Gruppe. Inside diameter 50mm Outside diameter (with knives) 170mm Body diameter 155mm 15 pcs. working length 200mm (without knives). 8 pcs. working length150mm (with knives) Hodpfxehzr Sts Acrol Each with Hydro holding. Price per pc. 500 Euro. Sellable per pc. or totally together. Available immediately.

Condition: reconditioned (used), functionality: fully functional, 4 speeds 3000/6000/4500/9000 rpm. right/left rotation Spindle lock by foot control Milling stop with fine adjustment spindle diameter 30 mm suction top+bottom each 120 mm spindle wrench open-end wrench 41 mm Cable + plug 16 Amp. Hodpfx Acsittnzorjl

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Hedpfx Acexqp Ngjrel

Condition: reconditioned (used), Year of construction: 2000, machine/vehicle number: KK052469, functionality: fully functional, Connected load 380V 4kW table size 1070 x 620 mm swiveling with hand crank 45 height adjustment with hand crank right/left rotation motor brake socket for feed unit Protective covers for hand milling spindle Ø 30 mm Hedpfjiinm Hox Acrjl Aigner stop suction connection 2x 120 mm speeds: 1400/3500/6000/8000 rpm Instruction manual

Condition: reconditioned (used), machine/vehicle number: 591, functionality: fully functional, Motor power 4kW table size 800 x 800 mm spindle Ø 30 mm Hedpfx Ajiw D Uhjcrol suction nozzle 120 mm Handwheel height adjustment fence jaws individually adjustable right/left rotation speeds 3/4/6/9000 rpm no brake

Condition: reconditioned (used), functionality: fully functional, Power consumption 380V 4,5kW table size LxW 1050 x 950 mm suction Ø 120 mm Hjdpfx Aeiw D Upscrel spindle-Ø 30 mm right/left rotation electrical change-over for two speeds 3 speeds fence jaws individually adjustable

Condition: reconditioned (used), Year of construction: 1966, machine/vehicle number: 662310, functionality: fully functional, Connected load 380V 3kW + 4kW right/left rotation Hjdpfxjiw D N Do Acrsl Star-delta switch 2800/4500/6000 rpm and 5600/9000/12000 rpm

Condition: reconditioned (used), Year of construction: 1962, machine/vehicle number: 7867/162, functionality: fully functional, Power connection 400V 4,0kW suction connection 1x Ø 100 mm, 1x rectangular 300x140 mm spindle Ø 30 mm height adjustable via handwheel spindle brake via line pull Spindle lock via locking pin right/left rotation 2 speeds spindle not tiltable LxDxH: 1060 x 960 x 1100 mm weight approx. 650 kg Hsdpfx Aoh Ux Rwjcrsl Unfortunately, we cannot answer inquiries without complete contact information.

Condition: not inspected (used), Milling fence with wooden stop jaws, each 760 mm long 30 milling arbor incomplete control panel on top cable w. plug 16 A Hjdei Atftjpfx Acrsl 130 mm suction diameter table 1000 mm wide, 800 mm deep motor approx. 4 kW, total power consumption 12,5 Amp. belt tension via handwheel spindle height adjustment via handwheel infeed jaws individually adjustable via handwheel

Condition: excellent (used), Year of construction: 1982, BALESTRINI Double Tenoner: Maximum working width: 360 mm Maximum working height: 120 mm Minimum working length: 240 mm 2 spindle heads with 2 x 7.5 HP motors Hsdpfx Aexuwa Iecrol Feed motor: 1 HP Weight: 1,100 kg 2 return conveyors for workpieces

Condition: new, Table dimensions 1.200 x 780 mm Hodpfxoxyafqj Acrel Motor output 7,5 kW Spindle diameter 30 mm