Spindle moulders with tiltable spindle

WINTER SF-45 MINI

Condition: used, Year of construction: 2017, working width 4 m Number of gangs . 0 Number of folders 2 0 Number of rollers 1 St. Lhedpfx Aeyv Iu Usggol

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Lhodpfx Ajt N Antjggel Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm Lodpjmiik Tjfx Aggshl

Condition: excellent (used), Surface Planer / Jointer, used Working width: 520 mm Total table length: 3000 mm Ljdpoy Emf Refx Aggjhl Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle, size 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. cutting depth: 8 mm Extraction connection: Ø 120 mm Table height: 860 mm Hydraulic table height adjustment with foot pedal Numerical cutting depth display Noise reduction combs on the cutterhead Star-delta starter Emergency stop button CE marked Including all documentation Knife setting gauge NEW drive belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex-location, loaded free on truck. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Condition: new, Year of construction: 2025, Suction nozzle diameter: 1 x 200, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Lodpfxehpmaws Aggjhl Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: new, Year of construction: 2026, Cross splitting wedge for 16-ton log splitters Lhsdpfsycu T Aox Aggel Allows logs to be split into 4 parts. It features a universal mounting system compatible with most wood log splitters available on the market. Thanks to its universal mounting design, it fits the majority of commercially available log splitters. Manufacturer: Cormak

Condition: new, Year of construction: 2026, CORMAK TS250 / 230V Table Saw The CORMAK TS250 / 230V is a professional table saw designed for woodworking shops, craft workshops, and furniture manufacturers looking for a reliable machine for accurate and efficient cutting of wood and wood-based materials. Its compact dimensions, robust construction, and single-phase power supply make it an excellent choice for users with limited workspace who still require high precision and performance. Main advantages of the machine 254 mm saw blade diameter – enables cutting materials up to 80 mm thick at a 90° angle. 2.2 kW (S1) / 3.1 kW (S6) motor – provides stable power even during intensive operation. Blade speed of 4000 rpm – ensures clean and smooth cutting results. Lodpfx Asvxhhzsggehl Blade angle adjustment from 90° to 45° – allows precise bevel and angled cuts. Efficient sliding table – with up to 1000 mm travel, ideal for formatting larger workpieces. 620 mm cutting width on the right side of the blade – enables processing of wide panels and furniture boards. Compact design and 230V power supply – allows operation in workshops without access to a three-phase electrical system. Design and technology The TS250 / 230V is based on a stable steel frame that provides high rigidity and effective vibration damping, resulting in improved accuracy and operator comfort. The spindle is powered by a 2.2 kW motor (S1), allowing long-term continuous operation, while the increased S6 power rating of 3.1 kW provides additional performance reserves when cutting harder materials. The blade height and angle adjustment system is based on precise guides and trapezoidal screws, ensuring stable settings even during extended operation. The working table height of 890 mm has been ergonomically designed for comfortable operation. The parallel fence and sliding table provide secure and accurate material guidance along the cutting line. Precision and working efficiency The CORMAK TS250 table saw enables precise cross-cutting and rip-cutting operations. The maximum cutting depth of 80 mm at 90° and 56 mm at 45° allows processing of most standard wooden components. The rigid construction and accurate blade guidance at 4000 rpm ensure smooth cutting edges and minimal material waste. Applications The TS250 model is suitable for: Woodworking workshops – for manufacturing furniture, cabinet fronts, frames, and structural components. Service workshops – wherever mobility, compact dimensions, and high precision are required. Craft workshops – for professionals working with various wood species. Individual users – who have access only to single-phase power but require industrial-level cutting quality. Standard equipment Carbide-tipped saw blade 250 × 30 × 2 mm Parallel rip fence Sliding table Blade guard Integrated blade height and angle adjustment system Optional equipment Dust extraction system with 100 mm port Format sliding table for larger workpieces Additional saw blade sets Technical specifications Parameter Specification Maximum blade diameter / bore 254 mm Blade speed 4000 rpm Blade tilt range 90°–45° Maximum cutting depth at 45° 56 mm Maximum cutting depth at 90° 80 mm Sliding table travel 1000 mm Cutting width on the right side of the blade 620 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 230 V Weight 125 kg Machine dimensions 1090 × 1330 × 910 mm

Condition: used, Year of construction: 2000, Planing width: 410 mm Infeed table: 1620 mm Outfeed table: 1170 mm Overall length: 2850 mm Strip planing cutterhead, Z = 4 Electrically adjustable jointer table with digital display Adjustable fence with auxiliary fence Motor: 4 kW Speed: 5000 rpm Space requirement: 2950 x 1260 mm Lhjdpfx Agezb N Tzsgol Weight: approx. 850 kg Location: Nattheim

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 920 mm band speed 35 + 70 m/min connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 200 kg Berg & Schmid - GBS 185 Eco AutoCut Metal Band Saw Extremely fast and smooth sawing thanks to improved drive technology - Miter cuts up to 60° left Ledpovn Uzaofx Aggehl - Suitable for dry and wet cutting - Coolant system - Machine base

Condition: new, GRAULE ZS 85 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 85 N cross-cut and mitre saw - inclinable - Material feed shoulder made of laminated wood - without machine stand and saw blade - Including: - GRAULE machine stand Lhsdpfx Agju R Sycsgsl for type ZS 85 N to ZS 170 Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -