Used Leibinger Gradsteller-Quersteller-Forwards-Backwards for sale (3,240)

Condition: ready for operation (used), Year of construction: 2007, Lifting height: 4330mm, max. load capacity: 4t, load center distance c: 500mm, load distance x: 525mm, wheelbase y: 2021mm, axle load with load front/rear: 9296/1181kg, axle load without load front/rear: 3268/3209kg, tyres: super elastic (SE), front tyre size: 250-15, rear tyre size: 21x8-9 (SC15), front track width: 1030mm, rear track width: 920mm, mast tilt forward/backward: 3°/9°, mast height lowered: 2400mm, free lift h2: 160mm, mast height extended: 4187mm, overhead guard height h6: 2322mm, seat height h7: 1251mm, coupling height h10: 546/421mm, overall length l1: 3886mm, length including fork carriage l2: 2886mm, overall width b1: 1256mm, ground clearance at wheelbase center m2: 147mm, aisle width with pallet 1000x1200 crosswise Ast: 4208mm, aisle width with pallet 800x1200 lengthwise Ast: 4408mm, turning radius Wa: 2483mm, minimum pivot point distance b13: 629mm, travel speed with/without load: 19/20km/h, lifting speed with/without load: 0.30/0.46m/s, lowering speed with/without load: 0.55/0.46m/s, drawbar pull with/without load: 3770/4390kg, max. drawbar pull with/without load: 15,940/16,140kg, travel motor power K60 min: 15kW, lift motor power at 15% duty cycle: 25kW, battery: 80V 5PzS840, battery voltage: 80V, battery capacity: 840Ah, battery weight: 2178kg, drive control system: RX60-40, operating pressure for attachments: 250bar, oil flow for attachments: 30l/min, quick fork/FEM carriage for attachments: pin-mounted, dead weight: 6477kg, operating hours: 5700h, with documentation. The left wheel gearbox is defective, otherwise fully functional. UVV inspection and maintenance were last carried out in May 2025. The inverters were replaced 2 years ago. An on-site inspection is possible. Lrodpsza E Rgsfx Aifsp

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2023, operating hours: 19 h, load capacity: 2,500 kg, lifting height: 6,000 mm, load center: 600 mm, fuel type: electric, mast type: triplex, power: 12 kW (16.32 HP), battery manufacturer: MIDAC, battery model: 48v 775Ah, battery capacity: 775 Ah, battery voltage: 48 V, Equipment: CE marking, adjustable boom, cabin, full service history, lighting, pallet forks, COMBi-MR4 2500kg Dynamic 360° – 2023 – Only 19 hours! As-new COMBi-MR4 Dynamic 360° from 2023 offered for sale. This electric multi-directional reach truck is in absolute mint condition and has only 19 original operating hours. The COMBi-MR4 is renowned as one of the most innovative and agile forklifts on the market. Thanks to its unique Dynamic 360° steering system, the machine can switch seamlessly between forward, sideways, and crab steering without stopping. This provides unparalleled maneuverability in narrow aisles, warehouses, and logistics environments. What makes this Combilift MR4 special: - Revolutionary Dynamic 360° Steering System - Multi-directional driving without changing driving mode - Ideal for long loads, pallets, and narrow aisles - Compact design with extremely small turning radius - Electric drive: quiet, powerful and emission-free - High storage capacity through efficient space utilization - Highly comfortable and ergonomic cab - Suitable for both indoor and outdoor use - Low maintenance costs due to AC technology - Extremely safe and stable with long or heavy loads The COMBi-MR4 is designed to improve efficiency in warehouses and production environments where optimal space utilization is crucial. Thanks to the low platform height and multi-directional operation, considerably more storage capacity can be achieved compared to traditional forklifts. Dimensions & Specifications - Overall length: 2,300 mm - Mast reach: 1,250 mm - Ground clearance under mast: 100 mm - Ground clearance at wheelbase: 100 mm - Cab height (without work lights): 2,350 mm - Total width: 1,950 mm - Fork carriage width: 2,110 mm - Front track width: 1,510 mm - Frame opening: 950 mm - Load center: 600 mm - Front overhang: 185 mm - Wheelbase: 1,875 mm - Rear overhang: 250 mm - Length from fork carriage: 1,100 mm - Approach angle: 35° - Gradeability: 15° - Departure angle: 35° - Forward mast tilt: 2° - Backward mast tilt: 4° - Minimum outside turning radius: 1,955 mm - Platform height: 390 mm - Platform length: 1,200 mm - Chassis width: 1,850 mm Lrjdpey N T Tcjfx Aifep Perfect for: - Timber industry - Metal industry - Logistics - Warehouses - Building materials - Manufacturing companies - Narrow aisles and compact storage management Machine is in exceptionally neat condition and immediately available.

Condition: new, functionality: fully functional, machine/vehicle number: HR34783, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 6,100 mm, free lift: 2,005 mm, fuel type: electric, mast type: triplex, construction height: 2,630 mm, fork carriage width: 980 mm, fork length: 1,200 mm, empty load weight: 3,600 kg, total length: 1,975 mm, drive type: Elektro, construction width: 1,116 mm, Electric 4-wheel forklift Chassis number: HR34783 Load center: 500 mm Fork width: 100 mm Fork thickness: 40 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Superelastic Front tires size: 18x7-8 Front tires condition: New Rear tires type: Superelastic Ljdpfx Aisy R Hmfjforp Rear tires size: 15x4.5x8 Rear tires condition: New Description: Machine fully workshop-inspected, cleaned, with new UVV safety check and inspection approved! Side shifter, 3rd valve, rear working lights, front working lights, full free lift, CE certificate, interior mirror, beacon, LED, seat, pedestrian warning light, reverse warning signal with broadband tone, 2 front and 1 rear LED working lights, yellow beacon - activated via ignition key, red seatbelt with restraint system, panoramic mirror, triple hose group, Accutouch mini-lever hydraulic control elements, mast tilt 5° forward/3° backward, tilt speed limitation, 1 degree/second with mechanical adjustment.

Condition: good (used), functionality: fully functional, power: 209 kW (284.16 HP), gearing type: automatic, fuel type: diesel, operation weight: 30,000 kg, maximum load weight: 11,000 kg, Year of construction: 2012, operating hours: 4,138 h, Equipment: air conditioning, all wheel drive, cabin, soot filter, Steering: Articulated steering with hydraulic power steering Steering angle: + - 40° Fuel tank capacity: 540 l Hydraulic tank capacity: 550 l Tire size front / rear wheel: 18.00 - 25 Axle load front / rear axle loaded: 29,400 / 11,600 kg Max. tractive force: 248 kN Drive motor: Cummins QSL9 Max. power: 209 kW/2000 rpm Max. permissible cross slope: 15% Max. permissible gradient: 28% Turning circle outside / inside: 6,713 / 3547 mm Bucket capacity (SAE, piled): 5.4 m³ Maximum speed loaded forward / backward on flat ground: 25.0 km/h Exhaust system: Silencer / catalytic converter Main dimensions: 9,715 x 2,600 x 2450 mm (LxWxH) Front / rear axle load unloaded: 13,100 / 16,900 kg Own weight: 30,000 kg Payload: 11,000 kg Lsdpfxevrd Eps Aifsrp

Condition: excellent (used), Year of construction: 2011, Profile Belt Sander, PS0 Rasprofil by Zimmermann with Extensive Accessories Belt sander with tilting table and additional fittings for rasping. Ideally suited for model making and mold construction. Designed for precision contour sanding. All settings made via clamping lever and fine adjustment. Drive motor: 400 Volt, 1.1 kW Table tiltable up to 45 degrees forwards and up to 20 degrees backwards Machine table approx. 400 x 400 mm Upper extraction arm foldable for sanding large parts. By locking the freestanding profile rail in the upper machine section, high angular accuracy can be achieved. Includes three reversible profile rails (15, 30, and 40 mm, straight and radius profiles). Several sanding belts included, see photos Three unused rasps Extraction connection 80 mm Lrodpfx Aiew Iqvqofep Waldmann mounted work light Original paint, touched up in places CE marking Very well-maintained machine from prototype manufacturing in the motorsport department of a Wolfsburg automotive manufacturer. Apparent minimal previous usage. Dimensions approx. 600 x 850 x 1350 mm (LxWxH). Weight approx. 220 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this seller.'

Condition: used, Year of construction: 2016, fuel type: diesel, Weights Empty weight: 6.650 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.601 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 874 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 360 Transport dimensions (LxWxH): 5,09x2,3x2,42 Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: HA16RTJ Year of build: 2016 Condition: Used Data: Max. working height: 16,01 m Movable up to working height: 16,01 m Platform height: 14,01 m Max. reach: 8,74 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,80 x 0,78 m Swivel range: 360° / endless Gradeability: 40% (forward) / 45% (backward) Total dimensions LxWxH: 6,73 x 2,30 x 2,27 m Transport dimensions LxWxH: 5,09 x 2,30 x 2,42 m Ground clearance: 0,24 m Overhang: 0,09 m Drive type: Diesel Lrsdjywidgspfx Aifsp Empty weight: 6.650 kg Special features: Rotating work basket, basket arm, all-wheel drive, white tires, particulate filter, PSA anchoring points present.

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Ljdpfx Aowndnujifsrp Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: used, Year of construction: 2023, gebraucht 2023 9691 prompt, Zwischenverkauf v Türkei 24600 € 1 85 mm 247 mm 3 7.5 kW 80x20 mm / 500 mm; 30x10 120x30 mm / 650 mm; 50x10 50x50 mm / 500 mm; 30x30 Ø 50 mm / 500 mm; Ø 20 mm Ø 100x2,5 mm / 1.300 mm; 80x40x4 mm 70x70x4 mm 80x8 mm / 1.200 mm; 30x3 80x8 mm / 800 mm; 30x3 mm 1580 mm 1200 mm 1410 mm 2350 kg demo machine / mint condition net price 3 driven rolls (hydromotor and planetary gear) strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions plane rolls lateral rolls (forward-backward hydraulic, rest manual) horizontal and vertical operation Control console forfor- andbackward drive machine and equipment according to theCE regulations INCL. OPTION: CONTINUOUS SPEED WE HAVE MORE THAN 235 REFERENCES! BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. Lrjdpfowirkmex Aifjp • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Ljdog N Nl Dspfx Aifsrp Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending Ljdjndk N Aspfx Aiforp - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction Lsdpfeng Ax Ssx Aiferp TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, • Simple three-point linkage • Very robust, welded frame • Strong gearbox • PTO drive 540 rpm • Usable auger diameters from 10 cm to 80 cm, maximum length 1 m • Offset manually or hydraulically • Tilt adjustment of the auger tip (forward/backward) • Chassis length of 140 cm • Augers not included • Weight: 200 kg Ljdper Ezn Rofx Aifsrp

Condition: new, Year of construction: 2024, SCHORR electric forklift RR25FL480E with a load capacity of 2500 kg, a lifting height of 4.8m (triplex mast) and lithium-ion technology. The SCHORR electric forklift is equipped with a permanent magnet synchronous motor (PMSM). Compared to conventional motors, the PMSM motor provides better energy savings and maximizes battery uptime by 10% in optimal operating scenarios. Our electric forklift is designed to take advantage of lithium technology and comes standard with a removable 80V/150Ah lithium-ion battery. This also enables spontaneous intermediate charging (opportunity charging) and is also maintenance-free. The battery can be charged at a normal 230V socket without having to be removed. Thanks to its small turning radius of only 2250 mm, it is able to maneuver easily even in the tightest spaces and narrow aisles. Lsdpfepz H Uiox Aifjrp SCHORR electric forklift: -- 4.8m triplex mast -- Full free lift -- Incl. Li-Ion battery & internal charger -- All-rounder for indoor and outdoor use -- Removable lithium-ion battery - especially practical for multi-shift operation -- Opportunity charging / intermediate charging possible through lithium-ion battery -- Ergonomic work area allows safe & fatigue-free work -- Integrated charger allows charging at normal 230V outlet Technical data: -- Manufacturer: SCHORR -- Manufacturer's type designation: RR25FL480E -- Drive: Electric -- Operation: Seated -- Rated capacity/load: 2500 kg -- Load center distance: 500 mm -- Load distance: 495 mm -- Wheelbase: 1650 mm -- Tare weight: 4620 kg -- Axle load with load (front/rear): 5815/940 kg -- Axle load without load (front/rear): 1805/2450 kg -- Tires: hard rubber, non-marking / non-chalking tires -- Tire size, front: 7.00-12 -- Tire size, rear: 18X7-8 -- Wheels, number front/rear (x = driven): 2x/ 2 -- Track width, front: 975 mm -- Track width, rear: 955 mm -- Inclination mast/fork carriage forward/backward: 6/ 10 -- height of mast retracted: 2220 mm -- Free stroke: 1655 mm -- Lift: 4800 mm -- Height of mast extended: 5825 mm -- Height of canopy (cabin): 2550 mm -- Seat height referred to SIP/stand height: 1110 mm -- Coupling height: 295 mm -- Total length: 3725 mm -- Length including fork back: 2550 mm -- Total width: 1154 mm -- Fork dimensions DIN ISO 2331: 40x122x1070 mm -- Fork carriage ISO 2328, class/type A, B: 2A -- Fork carriage width: 1040 mm -- Ground clearance with load under mast: 120 mm -- Ground clearance center wheelbase: 150 mm -- Aisle width with pallet 1000×1200 crosswise: 3945 mm -- Aisle width with pallet 800×1200 crossways: 4145 mm -- Turning radius: 2250 mm -- Travel speed with/without load: 11/12 km/h -- Lifting speed with/without load: 0.29/0.36 m/s -- Lowering speed with/without load: 0.4/0.43 m/s -- Max. Climbing capacity with/without load: 15/15 % -- Service brake: Hydraulic -- Service brake: Hydraulic -- Parking brake: Mechanical -- Traction motor, power S2 60 min: 8 kW -- Hoist motor, power at S3 15 %: 16 kW -- Battery voltage/rated capacity: 80 V / 150 Ah -- Steering version: Hydraulic -- Sound pressure level L pAZ (operator position): < 74 dB(A) We offer leasing as an attractive financing option. We will be happy to quote shipping costs on request. Inform now!

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes max. 11 Hub/min cutting angle 1°15 work height max. 770 mm column arm ? mm oil volume 300 ltr. control konv. total power requirement 15.0 kW weight 11800 kg range L-W-H 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge * on recirculating ball screws * Movement by push-button (forwards backwards) * including ELGO digital position indicator - Manual quick cutting gap adjustment * by eccentric (right side stand) - Machine stand with overhang Lrsdpox Ni D Rjfx Aifsp - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency stop button - Operating instructions (PDF)

Condition: excellent (used), Year of construction: 2023, operating hours: 106 h, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, power: 185 kW (251.53 HP), gearing type: automatic, fork length: 3,000 mm, color: red, = Additional options and accessories = Lrsdpfx Ajv Hn D Ejifep - Twin tires = Further information = Transmission: Hydrodynamic powershift, 3 gears, automatic Year of manufacture: 2023 Unladen weight: 46,760 kg Lifting capacity: 33,000 kg Overall height: 370 cm CE marking: yes Technical condition: very good Visual condition: very good KALMAR DCG 330-12 FORKLIFT TRIPLEX FULL FREE LIFT FORK SHAFT SYSTEM 33,000 KG @ 120 CM LOAD CENTER SHORT WHEELBASE = 475 CM FORKS: LENGTH = 300 CM, WIDTH = 30 CM, THICKNESS = 11 CM FRONT AND REARVIEW CAMERAS TIRE PRESSURE MONITORING CENTRAL LUBRICATION SYSTEM LED LIGHTING PACKAGE CHASSIS/BODY: - Tow pin - Steps with anti-slip protection - Rear-view mirrors on the left and right, mounted on the front fenders - Heavy-duty and protective fenders CABIN: - EGO cab - Clear and toughened safety glass windows, thickness 6 mm - Clear side windows including sliding windows in both doors - Full doors with locks left and right - Full control panel right console with light control, rotary switch for display, levers for load handling system (electrically adjustable, dual function) - Multifunction lever on the left including horn, indicators - Brake system with pedals left and right - Interior comfort including mirror, handles, interior lighting, etc. - Front, rear, and roof window wipers and washers - Hydraulic steering including electrically height-adjustable steering wheel, manually adjustable sideways and lengthwise, with steering knob - External reversing lights - Tilt cab - Grab handle, left side - Automatic heating and ventilation (ECH) with fresh air filter - Cruise control pedal, right side - Kalmar standard key system - Cup holder - Coat hook - Color display: fuel level, engine and transmission temperature, engine oil pressure, battery voltage, clock and date, hour meter, service interval display, speed, engine RPM, various pop-up information, AdBlue level STEERING SYSTEM: - Kalmar steering axle with double-acting steering cylinder DRIVELINE: - Axletech drive axle HYDRAULICS: - Electric servo - Sight glass on hydraulic oil tank - Variable displacement pumps - High-pressure filter - Automatic engine speed increase when using the load handling function - Standard tilt angle 5° forward/10° backward ELECTRICAL SYSTEM: - Electrical system 24V - Rear and brake lights, LED - LED work lights on front fenders - 2 mast-mounted work lights - LED indicators including hazard warning - Master switch WHEELS: - Michelin 16.00x25

Condition: new, cutting diameter 1100 mm saw band length 11000 x 67 mm cutting width 1,6 mm capacity 90 degrees: square 1100 x 1100 mm capacity 90 degrees: flat 1100 x 1300 mm total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 8700 kg dimensions of the machine ca. 2800 x 1700 x 5200 mm The KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. The chips are transported away via a spiral conveyor. A chip trolley approx. 60 x 50 x 40 is included in the scope of delivery. The roller tables can be moved forwards and backwards via the control panel. There is a 1.40 x 1.00 metre roller table on the outfeed side. There is a motorised roller table 2 x 1.40 m on the infeed side. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table Lrjdpfeymf Ryex Aifop - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Lredpszagkzefx Aifjp Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 62 h, load capacity: 16,000 kg, lifting height: 5,500 mm, free lift: 1,830 mm, fuel type: diesel, mast type: triplex, construction height: 3,465 mm, power: 188 kW (255.61 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - diesel Load center: 1200 mm Fork width: 250 mm Fork thickness: 100 mm Mast type: Triplex Transmission: ZF 3WG171 Condition: New machine Technical condition: New Front tires type: Pneumatic Front tires size: 12.00 x 20 Front tires condition: New Rear tires type: Pneumatic Rear tires size: 12.00 x 20 Rear tires condition: New Lrodpfezbfixex Aifop Description: NEW MACHINE - immediately available! NEW TRUCK - ready for pick-up! Side shifter, fork positioner Increased lifting capacity to 17,000 kg! 3rd hydraulic valve, 4th hydraulic valve KALMAR fork positioner with side shifter, fork carriage with central level compensation, width = 2,500 mm Kalmar EGO comfort cab with ECC air conditioning, fresh air filter, tinted windows, air-suspended driver's seat with leather reinforcement Grammer Actimo XL Radio with RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming 12/24V voltage converter incl. 2 x 12V and 2 x 24V sockets Load indicator in the display Travel direction switch on the lift hydraulic lever Protective grille for overhead window Pressure accumulator for lift hydraulics Hydraulic oil cooler with fan Mast tilt: 14° forward, 10° backward Adjustable LED beacon Kalmar fork blades Fork length: 2,400 x 250 x 100 mm Raised air intake for air filter incl. pre-separator Mudguards on drive axle, mudguards on steering axle Anti-slip coating on front fenders and tank 2 additional LED headlights in the mast below the standard headlights 2 additional LED headlights on the front cab corners facing driving direction Electric cab pump Blue Spot rear warning light Automatic central lubrication system on the steering axle and at the fork carriage/mast Fire suppression system Front and rear view cameras with color monitor in the cab

Year of construction: 1966, condition: used, functionality: fully functional, machine/vehicle number: 562-66280, Hydraulic bridge punching cq cutting machine with forward and backward moving upper platen. Working area 600 x 2000 mm. Max oil pressure per cylinder 400 bar with a diameter of 185mm = 107 tons per hydraulic cylinder Guaranteed pressure force regardless of load location 100 tons Dimensions of the machine 320 x 170 x 190 cm Lrodpoud Rhvsfx Aifsp Weight 4,500 kg Machine is without oil; which has been drained upon removal All electrical documentation is complete; even warranty certificates for the Sick photocells from 1970 !

Condition: ready for operation (used), Year of construction: 2013, CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details. • Condition: Excellent – fully functional, very well maintained, low usage, ready for immediate operationTechnical specifications • Max cutting length: approx. 4,200 mm (depending on configuration) • Max cutting width: approx. 3,200 mm • Saw blade tilting range: 0° to approx. 45° • Max cutting height at 0°: approx. 72 mm • Main saw motor power: approx. 14 kW Ledjyvqz Dspfx Aiferp • Scoring blade diameter: approx. 180 mm • Saw carriage feed speed: up to 100 m/min (forward/backward, Speed version) • Control system: CNC/PC controlEquipment and features • Automatic tilting saw blade for angular cuts • Optimized cutting cycles (single, multiple, batch) • Program-controlled pusher for accurate positioning • Integrated scoring unit for clean cuts • Air tables (3x) for easy handling of large panels • Format and angular cutting system Additional equipment • Saw blades • Scoring blades • Optional optimization software

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 340 mm, grinding width: 170 mm, total height: 730 mm, total length: 930 mm, total width: 780 mm, The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum removal rate: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm Lodexb Uq Djpfx Aifsrp T-slot of worktable: 1–12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Lateral feed handwheel increment: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine structure. The grinding head operates smoothly. Compact design and low noise emissions. A working enclosure is available separately. The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately. PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Lodpfjxf Na Uex Aiferp Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.

Condition: used, Type : Dynamic storage and accumulatio table Dimensions : 250 x 90 x 200 cm Movement : forward - backward for continuous feeding Lrodpfx Aisx R A Uxjfop Buffer table between two machines. Full plastic casing

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0 - 90 Grad turning speeds 0,25 - 4,0 U/min 360 Nm welding current 500 Ampere total power requirement 0,4 / Hand kW Lrjdpofv Axqefx Aifsp • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 900 mm table load 1,0 t swivelling range 135 Grad turning speeds 0,12 - 1,2 U/min 820 mm Lredpfjfv Axxjx Aifop welding current 500 Ampere total power requirement 0,75 + 0,55 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.