Used Log And Model Distributor Hydraulic for sale (37,514)

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg Gjdpfx Aljznngxs Sokc range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec Godpfji Db Erex Al Sskc dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 60 mm -Piston rod: Ø 30 mm -Eye diameter: 22/20 mm -Stroke: 40 mm -Quantity: 1 cylinder available Gkedsd Euz Espfx Al Soc -Price: per piece -Dimensions: 445/85/H110 mm -Weight: 7.8 kg

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Gkedpfx Aljpvk Die Soc Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Gjdpfehtaaqjx Al Sokc Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Gkedpfsu Rni Hex Al Sjc Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: used, Technical details: Gksdju Nfnkepfx Al Soc pressure: 63 t distance between columns: 900 mm no. of strokes: ca. 75 Hub/min ram adjustment: 80 mm stroke adjustable from - to: 3-100 mm Table dimensions: 900 x 600 mm throat: 310 mm dayligth: max. 350 mm drive power: 11 kW voltage: 380/220/24 V frequency: 50 Hz operating pressure: ca. 150 bar oil volume: 500 l safety distance: 150 mm passage opening in table: 200 mm total power requirement: 11 kW weight of the machine ca.: 4,0 t space requirements of the machine approx.: L:1,8 x B:1,8 x H:3,7 m DIFFERENTIAL PATH PRESS HIGH SPEED PRESS - High-speed press, C-stand - Compressed air connection: approx. 5 bar Condition. Press is not under power, without switch cabinet, sale as is. - Documentation available i.D. *

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Gkodpfx Alju Nfq Ej Sjc Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm Godpou Nfudjfx Al Sokc table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m Gkodpfx Alsu Nfv Ue Sjc The machine is equipped for straightening work. *

Condition: used, Technical details: pressure: 0,9 t daylight dimension : table/slide up: 350 mm Gkedpfx Asu Nfw Ssl Soc throat: 295 mm ram diameter: 40 mm Table dimensions: 600 x 330 mm height over floor: 935 mm weight of the machine ca.: - t dimension machine xH: 1,2 x 0,8 x 2,1 m Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation *

Condition: used, Technical details: Gedpfx Asu Nk Amsl Sjkc Lifting height: 90-800 mm lifting capacity in kg: 500 kg table length: 1415 mm table width: 860 mm total power requirement: 1,1 kW weight of the machine ca.: - t dimensions L x W x H: 1,45x0,9x0,9 m transport dimensions LxWxH: 1,45x0,9x0,2 m control via panel up-and down and emergency stop hydraulic make HAWE connected via bayonet connection, volume flow 1,14 l/min with 400 bar pressure *

Condition: used, Technical details: tank capacity: - l overpressure : - bar Gkodpfou N E Nhex Al Sjc motor: 1400 U/min total power requirement: 3,0 kW weight: 312 kg dimensions L x W x H: 1,05 x 0,67 x 1,94 m application use of hydraulic components operation pressure min/max.: 60/70 bar - nitrogen 54 bar - hydr. tank size L: 630 x W: 440 x H: 380mm with 100 Liter content *

Condition: used, Year of construction: 2001, Technical details: pressure: max. 275 bar stroke length max.: 600 mm weight: 1,5 t Godpfju N E Rfjx Al Sskc dimensions L x W x H: 2,8x0,6x0,6 m hydraulik operation cylinder - outer dimensions hydr. cylinder diameter=300 x 830mm - outer dimension operation cylinder diameter=360 x 750mm - stroke cylinder diameter 160 x 600mm equipment: - 1 hydraulic connection 1/2" - 2 fixing flanges (490x490mm) - 4 supports (Dm=60 x 800mm) - 2 sheet covers for flanges 600x600x80mm *

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Gksdpfx Alevc Amto Sjc Drain with rollers for clippings 2x protective grid *

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies i.D. Gkedpfx Alou Ick Tj Sec *

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Design: Single-acting -Piston diameter: approx. 165 mm Gkodpfx Alecv Sivj Sjc -Piston rod: Ø 140 mm -Stroke: 1000 mm -Total length retracted, center to center of hole: 1670 mm -Piston rod mounting: Ø 80 mm -Cylinder mounting: Ø 80 mm Quantity: 1 piece available -Dimensions: 1850/270/H220 mm -Weight: 318 kg

Condition: new, Year of construction: 2018, machine/vehicle number: DF0280, pressing force: 160 t, pressure:160 t passage width:1000 mm stroke:800 mm total power requirement:22 kW weight of the machine ca.:13 t dimensions:2300 x 2850 x 4000 mm return capacity:16 t Table dimensions:1430 x 1000 mm :1430 x 1000 mm table height over floor:850 mm Gksdpfx Aod Ap Udol Sec pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:15 mm/sec :400 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm :200 mm/sec Monitor:10 Zoll

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Gksdpfx Ajw U U Svel Sjc * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 Number of working hours ca. 15.800 h 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW Gsdpfoxaaghjx Al Sokc weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück no. of strokes 16 - 24 Hub/min Godsxaag Ujpfx Al Sokc oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4100 x 2200 x 2190 mm ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, pressure 50.0 t stroke 200 mm table surface area 730 x 205 mm dayligth 75 - 1050 mm column travel between the guideways 730 mm weight of the machine ca. 292 kg range L-W-H 1040 x 800 x 1880 mm Description : - Standard with cable winch - for easy height adjustment of the support table - Piston delivery either manually or pneumatically - Powerful workshop presses for craft and repair businesses - Optimum price-performance ratio thanks to rational design - The standard foot pedal keeps your hands free for the workpiece - Increased range of application thanks to the optionally . available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile in use thanks to the pressure cylinder that can Gjdpfsxaa Ixox Al Sjkc . be moved to the left and right

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation Gedpfexaa I Sex Al Sjkc - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch work height max. 800 mm oil volume 150 ltr. total power requirement 11,0 kW weight 5500 kg range L-W-H 4.000 x 2.410 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Gkjdsxaa Rgjpfx Al Sec * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST Godpfx Aoxabd Uel Sokc plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)