Used Lux Vm-Tec K50V4 for sale (6,727)

Condition: used, Item: A-5994-milk tank 16,000 L Complete milk transport Stainless Steel tank,   Insulated, capacity 16,000 L. 4 chambers. Kedpfx Aewtmwcsgnolt Producer: VM Tank Denmark  Chambers: 7,500 + 2,500 + 4,000 + 2,000 L

Condition: good (used), Year of construction: 2001, functionality: fully functional, Portal machining center for HSC milling The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system. Kodpfx Agjvri Nmonelt Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Speed: 36,000 rpm - Fischer motor spindle - Spindle mount: HSK E50 - Feed rate: up to 60 m/min. Work table - Dimensions 900 mm x 700 mm - Max. workpiece weight 800 kg Control - Röders HSC RMS6, including software for: milling simulation and for cutting out machining - Electronic hand control panel and mouse - Ethernet interface integrated in Windows NT - Remote maintenance of the RSM 6 machine control Machine structure - Portal version with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for milling spindle - Infrared measuring probe for automatic: tool length correction, diameter measurement and tool breakage monitoring - Microjet spray cooling and lubricator - Fixed bearings and spindle nuts water-cooled - Fully protected cabin (crane loading possible) - Connection for the work area extraction - 2 pcs. Screw chip conveyor - Workpiece cleaning via separate air nozzles Machine data - Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and repair work was carried out regularly. A viewing with power and chips is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: good (used), J-Tec sack tipping cabinet with filter extraction Entirely stainless steel Lockable by lid Full sensor present Control cabinet excl. cabling Kodpjwyf Iyjfx Agnjlt Equipped with pneumatic bunker vibrator Matching weighing hopper with vacuum filter and double K-Tron dosing screw also available See our other advertisements

Condition: used, Dump cabinet dump cabinet bag dump funnel Incl. extraction filter unit Aerob Entirely stainless steel Excl. fan and filter cartridge. Kjdpfx Agewyf D Ionelt See our other advertisements VMA Wekerom

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0656-000, space requirement length: 7,000 mm, space requirement width: 5,000 mm, space requirement height: 5,000 mm, overall weight: 8,000 kg, total height: 5,000 mm, total width: 5,000 mm, total length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet length: 1,200 mm, control cabinet width: 400 mm, type of input current: three-phase, input voltage: 380 V, power: 30 kW (40.79 HP), 6 stainless steel silos, of which 3 silos are equipped with internal mixers. Capacity per silo approx. 6 m³. Additionally, there is a big bag filling station with dust extraction included. Control cabinet including weighing hopper for batch preparation. Klodpfox R Sr Hjx Agnst

Condition: new, Briwa-tec Rubin 1200 side channel blower (176 kg) with air filter , pressure-/vacuum relief valve , additional silencer and various connection pipes (26,5 kg) ,unused, 100% functional, scope of delivery according to photos Ksdpfji D Uk Asx Agnelt

Condition: ready for operation (used), Year of construction: 2003, operating hours: 19,090 h, functionality: fully functional, machine/vehicle number: 10221-005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table width: 320 mm, table length: 320 mm, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine can be dismantled and loaded for €3,000. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm Spindle Max. speed: 42,000 rpm Kledpfewyclvex Agnst Tool changer Tools in ATC: 48 + probe Pallets Number of pallets: 6 ITS 50 pallets: 54 Pallet size: 320 x 320 mm MACHINE DETAILS Total operating hours: 54,027 h Milling hours: 19,090 h Setup time: 2,353 h

Condition: excellent (used), Continuous mixer M-tec D 10 Drive power 2,2 kW Mixer capacity approx. 20 l/min 14 pieces available Very good ready to use condition, directly from production!!! Kedsirfp Iopfx Agnjlt

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Klsdpfx Agsir E E Esnet Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Incl. Sampling unit specicon

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Kodpeqabm Eefx Agnslt Price on negotiation!

Condition: good (used), Year of construction: 2005, functionality: fully functional, B-Tec model m-800 Year of construction 11/05 55kg net weight Dimensions in mm approx. 1600x750x580 Washroom dimensions: 570 × 470 × 520 mm 1 × tank for circulating medium Tank size max. 60 L Klsdport Rmnofx Agnst 1 × container for fresh medium. Tank size max. 30 L 6 bar operating pressure --Sale on behalf of the customer----

Condition: new, Year of construction: 2025, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 800 mm, 🚀 EMO Show Highlight: VM2000 Gantry Milling Machine 🚀 – Precision. Performance. Immediately Available. Our CNC gantry milling machine VM2000 will be demonstrated live at the upcoming EMO trade fair – giving you the unique opportunity to secure this model directly from the show at a special price! 🔧 Technical Highlights: ✅ Travel range: X 2000 mm / Y 1300 mm / Z 800 mm ✅ Spindle: HSK A63, 15,000 rpm, 38 kW peak power ✅ Table size: 1650 × 1300 mm, load capacity up to 4000 kg ✅ Precision: Positioning accuracy P0.012 mm ✅ 24-position tool changer for maximum flexibility 💡 Perfect for tool & mold making, automotive, and aerospace industries. Further specifications attached and below: Category Value Control FANUC 0i MF Plus X-axis travel 2000 mm Y-axis travel 1300 mm Z-axis travel 800 mm Spindle nose to table 235–1035 mm Column distance / max. workpiece height 1820 / 1000 mm Table size (L×W) 1650 × 1300 mm Max. table load 4000 kg T-slots (width × pitch × qty.) 22 × 180 × 7 mm Spindle taper HSK A63 Max. spindle speed 15000 rpm Spindle power (cont./max.) 15 / 38 kW Max. spindle torque (cont./max.) 70 / 149 Nm Rapid traverse X/Y/Z 20000 / 20000 / 12000 mm/min Feed rate X/Y/Z 1–10000 mm/min Motor power X/Y/Z 4 / 9 / 9 kW Tool changer type Arm Tool positions 24 Max. tool diameter φ75 / φ130 mm Max. tool length 300 mm Max. tool weight 8 kg Positioning accuracy P0.012 mm Repeatability Ps0.010 mm Air pressure 0.6–0.8 MPa Coolant flow 99 L/min Power supply 3/PE, AC380V, 50Hz Power consumption 60 kVA Machine dimensions (L×W×H) 5000 × 4910 × 4600 mm Machine weight 21000 kg Main Features 1 FANUC 0i-MF plus absolute, type 0 system, 15-inch color LCD 2 iHMI + manual I 3 Max.1500, min.400 block look-ahead 4 Data server (2GB) 5 Fast Ethernet card 6 Straightness compensation interpolation 7 Custom operator panel 8 Rigid tapping 9 Transformer 10 Work area lighting 11 3-color signal beacon 12 Portable MPG 13 Automatic power-off 14 Safety door interlock 15 Foot switch and tool release button 16 Coolant tank level monitoring 17 Direct-drive spindle HSK A63, 15000 rpm 18 Spindle oil chiller 19 Air blow for machining 20 Coolant system 21 Spindle air seal 22 Air gun / water gun 23 Grease lubrication system 24 Pneumatic system 25 Full enclosure Klodpjw N I A Defx Agnst 26 Electrical cabinet air conditioner 27 Swiveling control cabinet 28 Separated cabinet for high & low voltage 29 Hinged chip conveyor 30 Adjustable leveling pads & foundation blocks 31 Tool kit 32 Operating manuals 33 Spiral chip conveyor 34 Operation manual 35 Spiral chip conveyor 36 CTS, 20-70 bar, including through-spindle air 37 Oil separator (Chinese brand) 38 Arm-type ATC, 24 tools 39 FAGOR absolute linear scales on X, Y, and Z axes 40 Encapsulated iron package 👉 Get more info & secure the special price: New CNC Gantry Milling Machine Skymaster VM2000 – Kraft Werkzeugmaschinen

Condition: ready for operation (used), Year of construction: 1995, Net/gross volume mixer: 1500/2000l, useful volume secondary tank: 1790l, motor power: 55kW, length: 4700mm, width: 2500mm, height: 3400mm, weight mixer/ secondary tank:3.9/ 1.21t, with extensive documentation, on-site inspection is possible. Klodpfxern Rc De Agnst

Year of construction: 2023, condition: ready for operation (used), Production capacity: 2x120kg, inlet connection (liquid phase): 22mm/RWS22, outlet connection (gas phase): DN50 PN25, optional (unregulated gas phase): RWS28, vent line (safety release): RWS22, separator drain: RWS12, connected load: 40kW, output: 3000kWh. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/400mm. Documentation available. On-site inspection is possible. The machine is unused and still in its original packaging. Kjdpfeuwrwuex Agnelt

Condition: new, maximum load weight: 28,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,184 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,722 mm, Year of construction: 2025, Equipment: ABS, Bodywork * Docking funnel 8" mounted at the upper rear, behind the tank, lockable with a manual slide gate * Direct idling at the rear side * Automatic pump shut-off * Lincoln centralized lubrication system for optimal time-based lubrication of slewing rings and axles (for drum brake 36P) * Bracket with two wheel chocks Pump * Vogelsang pump, capacity 6,000 L/min Axles * VALX axles with drum brakes, 9 tonnes, offset 0 Brakes * WABCO EBS braking system * WABCO tire pressure monitoring system according to R141 * TPMS system Axles Ksdexmudnspfx Agnelt * Forced-steering axles Tire size * 385/65 R22.5, 9 t Tires * Brand: APOLLO Lighting * 24-volt lighting system * Side marker lamps with integrated flashing function * Work lights left and right at the first axle * Two LED work lights at the rear (one left, one right, mounted on the hose racks) * Two 7-pin connectors and standard 15-pin connector Accessories * Ball valves for complete tank emptying * Stainless steel vent container Paintwork * Tank painted RAL 7030 stone grey * Chassis painted RAL 7016 anthracite grey

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: Fully operational and lightly used belt dryer from New eco-tec. Optionally available with air scrubber and 180m³ silo for dried goods. The plant was in operation until recently and is ready for immediate use. The system spans 2 containers and has a belt length of 24m, rated for 1.5MW thermal output. The belt dryer is entirely made of stainless steel inside the containers. Viewing by appointment. Kjdpfxjyr Aiqe Agnolt

Year of construction: 2012, condition: excellent (used), machine/vehicle number: M 5046 Typ 101 000 432, Embossing calender for roll to roll (100m/min). sheet material can also be processed, separate insertion tables are included exchange cassette (structure fine linen) The machine is in a very good condition, few operating hours Kljdpfehr Rlysx Agnjt machine book / instruction manual

Condition: used, Year of construction: 2018, Are you in search of a bridge type milling machine? With X-travels ranging from 2-15m, Y-travels up to 4m, and Z-travels up to 2m, we offer a versatile selection of machines to meet various machining requirements. Whether it's CNC universal heads, W-axis, rotary table, tool changer, or controls from renowned manufacturers such as Siemens, Fanuc, and Heidenhain, our extensive range of accessories allows for maximum flexibility and efficiency. Take a look at the PDF catalog below! Discover the ultimate precision and robustness of our refurbished CORREA portal milling machines, meticulously restored by our experts in Spain. These machines have been meticulously inspected and tested according to the highest standards, guaranteeing top-notch machining quality. An outstanding example is our used CNC portal milling machine VM 2018, equipped with the proven Heidenhain control. With impressive performance data and detailed technical features, this machine has everything you need for precise and efficient machining. Ksdpfx Agjhx R Dkenslt x-travel: 2300 mm y-travel: 2000 mm z-travel: 1000 mm Table size: 2300 x 1600 mm T-slots (width x spacing x number): 8x 22 x 180 mm max. table load: 8 t Distance between columns: 1840 mm Distance between spindle nose and table: 180~1180 mm Spindle motor: 22/46 kW Spindle torque: 140.1/286.5 Nm (S6-25%) Spindle nose: 50 SK Spindle speed: 10000 (direct) rpm Rapid traverse X, Y: 20000 mm/min. Rapid traverse Z-axis: 15000 mm/min Milling feed range: 1~10000 mm/min Machine size (LxWxH): 7027 x 5217 x 4339 mm Total power requirement: 60 kVA Machine weight approx.: 25 t CNC control: Heidenhain TNC 620 Chip conveyor with chip container: 2 pcs spiral, 1 pc hinge belt Through-spindle coolant: 20 bar CE version: Certified by TUV Used CNC portal milling machine with HEIDENHAIN 620 TNC control and extensive accessories, featuring: - Monoblock cast iron machine bed and monoblock crossbeam provide highest rigidity for precise machining results. - The entire structure has been optimized for rigidity and precision through FEM analysis. - P-class feed roller linear guides allow maximum load capacity with a lower friction coefficient (0.003-0.006). They ensure smooth operation through optimized roller circulation and guidance, reducing energy consumption. - The double-nut C3 ball screws ensure precise milling even for heavy loads. - Spindle direct drive with 10,000 rpm and SK50 tool holder. - Spindle motor power 22/46 kW (S6-25%). (22 kW continuous power, 46 kW for 30 minutes overload) - Spindle torque corresponds to 140.1/286.5 (S6-25%) Nm - Two spiral conveyors and one chain chip conveyor effectively remove chips. All essential components are sourced from reputable manufacturers in Europe, ensuring reliable, short-term, and long-term availability of spare parts. Don't miss the opportunity to optimize your production processes and invest in high-quality milling technology. Experience the difference that our portal milling machines offer - reliable, durable, and ready to tackle your most demanding tasks. Contact us today and let our experts guide you.

Year of construction: 2016, condition: excellent (used), 24V , 100VA , max.7 bar Kodpfxelqwz To Agnelt

Condition: good (used), Year of construction: 2001, machine/vehicle number: 88745-38, functionality: fully functional, operating hours: 6,785 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 36,000 rpm, table load: 800 kg, New spindle and computer installed in 2018 Kodpfx Agowi Ndkonjlt No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X / Y / Z: 800 / 600 / 400 mm Number of axes: 3 Speed: 36,000 rpm Tool holder: HSK 50 E Tool changer: 30-station Table: 880 x 700 mm Workpiece weight: 800 kg MACHINE DETAILS Dimensions: approx. 2.85 x 3.15 x 3.0 m Weight: approx. 8.5 t On-time: 179,460 h (total) On-time since 2018: 38,141 h Spindle hours since 2018: 6,785 h EQUIPMENT - Incl. 29 tool holders - No coolant/minimal quantity lubrication - Spindle cooling system - Incl. probe - Without Vice and clamping device (shown in picture)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 717N00A2301912, hopper volume: 150 l, MOTAN LUXOR 50 Dryer + BIN S 150 Drying Hopper A compact and reliable set consisting of the LUXOR 50 dryer and the BIN S 150 ecoProtect drying hopper with a capacity of 150 liters. Ideal for medium-scale production or applications requiring high quality standards with moderate material throughput. The system features a single-valve configuration with a twin-bed molecular sieve, a blower, and a 10 kW heater. Ksdpfx Aswz H T Hsgnolt Equipped with a Siemens LOGO! control system and a user-friendly interface, it allows scheduling, automatic or manual operation modes, and monitoring of alarms and safety functions. A dependable solution for precise drying of hygroscopic materials. Technical specifications: • Dryer: MOTAN LUXOR 50 • Drying hopper: BIN S 150 • Hopper capacity: 150 l • Dry air flow rate: 50 m³/h • Rated power: 10 kW • Power supply: 3/N/PE 230/400 V, 50 Hz • Control system: Siemens LOGO! • Total weight: approx. 155 kg • Year of manufacture: 2023

Condition: used, W x L 60 cm x 250 cm Kodpsu Arh Refx Agnslt

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Ceramic angle standard from Wilbanks (CoorsTec) Ksdpfxoq Tdlzo Agnslt 600x460x80mm Perpendicularity < 4µm Little used, very good condition Measurement protocol on request (surcharge)

Condition: like new (used), Year of construction: 2019, Used belt dryer New eco tec Klodpfx Agevrd Uqenjt Model Woody 500-100-1.0 SP Produced in 2019. Like new.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: S8758, A machine for gluing cardboard books. Gluing is done using 16 heads. This allows selective application of glue where it is needed. Ideal for gluing board books with flaps, board books with puzzles Kljdpfx Ajwhc U Tsgnet