Used Dvpn 75 for sale (6,607)

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, The system comes from current production. TECHNICAL DETAILS Screw diameter: 2 × 75.0 mm L/D ratio: 38 D Rcjdpfsztw Agsx Alcjf Design: Co-rotating MACHINE DETAILS Control system manufacturer: Siemens Drive power: 180 kW EQUIPMENT 2 dosing units Water bath Granulator Vacuum degassing Segmented screws and cylinder

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 29130000062, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed length X-axis: 90,000 mm, feed length Y-axis: 90,000 mm, feed length Z-axis: 90,000 mm, nominal power (apparent): 73 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,600 mm, total length: 4,000 mm, total width: 3,500 mm, table width: 650 mm, table length: 950 mm, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, input current: 125 A, DECKEL MAHO DMC 75 V LINEAR CNC Vertical Machining Center - Frequency: 50/60 Hz - Tool holder: HSK 63 - Table with six slots and a GARANT zero-point clamping plate, plate dimensions: 360 x 360 mm - Including 3D measuring probe - Including chip conveyor Note: The machine can be transported on a truck up to 3000 mm wide! Rcjdpfszld Nqex Alcjf Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 26010607, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 5,900 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 280 mm, number of axes: 5, number of slots in tool magazine: 20, controller manufacturer: SIEMENS SINUMERIK, total height: 3,200 mm, total length: 11,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, table length: 5,900 mm, table width: 1,600 mm, Equipment: CE marking, MAKA PE 75, a 5-axis machining center – fully functional and ready for use. The machine was used for the production of wooden stairs, and dedicated software for CompassStaircase is installed. Redpfszwcfzjx Alcscf Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Number of milling spindles: 1 Vertical drilling spindles: 16 Horizontal spindles in the X-axis: 2 Horizontal spindles in the Y-axis: 2 Vacuum pump capacity: 130 m³/h Number of vacuum pumps: 1 Number of crossbars/cantilevers: 8 Pneumatic pressure: 6 bar A-axis: ±90° / 180° C-axis: 540° Rapid traverse X/Y: 60 m/min Rapid traverse Z: 24 m/min Electrospindle cooling: liquid Table: traversing/cantilever Application: wood processing / staircase production.

Year of construction: 2025, condition: like new (used), Replacement shafts for Lindner Urraco 75 for sale High-quality replacement shafts for a Lindner Urraco 75 shredder are for sale. – Application: Old wood, household and commercial waste – Condition: New / very good condition Design: Original Lindner shafts, not replica shafts The shafts are ready for immediate use. The price stated is net. Rcodpszphiijfx Alcjf Notes: • Sale is made excluding any warranty or guarantee. • No returns or renegotiations. • Subject to prior sale. All information is without guarantee. The seller assumes no liability for any errors, omissions, or changes to the information. The sale is made exclusively subject to prior sale.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2019062, Used (2019), in very good condition termo printing calender with felt. Width: 2000 mm. Reliable Italian quality. Ideal for sublimation and textile finishing. Clean, properly maintained and fully functional. CHARACTERISTICS OF PRINTING CYLINDER: Diameter : 200 mm (7,87“). Width : 2.000 mm (78,74“). Working width: / 1.800 mm (70,87”) TECHNICAL DATA: Installed power: 14 kw/h Average electric consumption: 9 kw/h Compressed air pressure: 3-8 bar Mechanic speed: 0.1 - 1.7 m/min Overall dimensions: width 3.110 mm (122,44“). length 1.250 mm (49,21“) height 1.650 mm (64,96”). Net weight: 950 kg Machine produced according to CE rules TENSION CONTROLS: Tension control for printing material: Entry: brake with manual adjustment and manual textile tensioner Exit: tangential winding on felt Tension control for printing paper: Entry: disk brake with pneumatic adjustment. Exit: winding with pneumatic device Tension control for protection paper: Entry: disk brake with pneumatic adjustment. Exit: tangential winding on felt Single motor NOMEX felt with manual tension adjustment system and automatic felt-centring device Incorporated system of felt protection in case of black out and/or compressed air lack Rodpfjzuy Rvex Alcscf

Condition: used, Year of construction: 2018, functionality: fully functional, number of blades: 6, Cambio debarking machine up to Ø 75 cm with infeed and outfeed – 100 m/min, completely overhauled in 2018, new 6-knife rotor, including electrical system. Rcedpfx Aozuftijlcjf I am offering a high-performance, extremely fast, and complete Cambio debarking system. The package includes not only the debarking machine but also the complete infeed and outfeed, so that the system can be directly integrated into your existing machinery. In 2018, the machine was completely overhauled and has been professionally maintained since then. A special highlight: During the 2018 overhaul, a completely new knife ring with 6 cutting knives was installed. The machine was operated in a single-shift operation. Price upon request.

Condition: used, Year of construction: 2015, operating hours: 49,800 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 9.8 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Product description: GA75FF A 10 APB 400 50 Product number: 0000090580 | 00000502 | 8153587723 Date of manufacture: 19/03/2015 Model: GA75_12 Product description: GA 75 Brand: Atlas Copco Air receiver mounted / Floor mounted (N) Brand: Atlas Copco (01ATLAS_CO) Commercial power: 75 kW (75KW) Cooling: Air cooled (AIR) Electrical approval: IEC (IEC) Element family: Oil Injected Screw (OIS) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Integrated dryer: Yes (Y) Mk5 expansion module: Yes (Y) Model variant: Workplace Full Feature (W_FF) Pressure vessel approval: CE / ASME (CEASME) Product company: API (API) Regulation: Elektronikon standard (MK5STD) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Ex works, the machine is already equipped with the following special equipment: Rsdezvqpfjpfx Alcscf - Integrated refrigerant dryer - Integrated heat recovery - Expansion module Current operating hours: approx. 49,800 hours Used machine, sold as is, without warranty.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1729, Technical data: IHF - Ingersoll Rand - Quick Lift QLA 75-S-GM manipulator handling device, lifting aid Payload at full extension 75 kg, at the gripper 25 kg Overall height approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight approx. 400 kg Swivel range 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is disassembled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities from 80 to 5000 kg; please inquire. See pictures. Rcodpjzv Hw Ejfx Alcef Shipping by freight forwarder or collection only by prior arrangement.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, color channels: CMYK, number of print heads: 2, We are offering this used Mimaki TxF300-75 DTF roll-to-roll printing machine and the accompanying Adkins dryer with powdering unit. Rcjdpjzn Iqqsfx Alcef Year of manufacture: 2024 Condition: Ready for use / currently still in operation. Otherwise, please see the photos. We also have other machines of the same design available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2021, Chamber dryer for recycled plastics. Rsdsztzzgspfx Alcjcf Manufacturer: Creative Machine Building Center Year of manufacture: 2021 Power supply: 400 V Power: 75 kW Capacity: 700 kg/h (soft plastics) 1000 kg/h (hard plastics) External dimensions of the machine: - length: 4,000 mm - width: 1,500 mm - height: 2,600 mm Includes a belt conveyor. Technical condition: used

Condition: not inspected (used), Year of construction: 2022, functionality: unexamined, 2x ABB 75 kW IE4 Electric Motors M3BP280SMC4 | 2022 | Premium Efficiency | Set of 2 ABB Premium Efficiency Electric Motors – Set of 2 For sale: Two identical ABB industrial electric motors. Both motors are identical and are therefore offered as one complete set. Suitable for pumps, compressors, fans, conveyors, and many other industrial applications. Located in Rotterdam, the Netherlands. Technical Specifications Reference S16 Quantity 2 identical motors Manufacturer ABB Model M3BP 280SMC4 Power 75 kW Speed 1487 rpm Frequency 50 Hz Voltage 400/690 V Efficiency Class IE4 Premium Efficiency Protection IP55 Rcjdjznbuvjpfx Alcof Mounting IMB3 / IM1001 Duty S1 Year 2022 Weight 725 kg each Total Weight Approx. 1,450 kg Delivery: Ex Works Rotterdam, the Netherlands Loaded onto buyer's truck 100% payment in advance Sold as is, where is No warranty or guarantee No claims or returns accepted

Condition: like new (used), Year of construction: 2017, operating hours: 57 h, functionality: fully functional, machine/vehicle number: LS001402, FULL UV Size 53 x 75 cm, Anicolor, Wallscreen K Press Center XL 2, Alcolor VARIO dampening system, Combistar cooling and recirculation unit, Inking unit temperature control, Water-cooled machine, Autoplate PRO, Blanket wash, Roller wash, Impression cylinder wash, Coating unit, 2x UV interdeck dryer, 1 x UV end dryer, Powder spray, Extended delivery X2 module, Sheet brake, FOIL Print kit, Airstar Pro, Cleanstar Steel plate in feeder and delivery Redpfx Aox An Urolcocf

Condition: excellent (used), Year of construction: 2020, operating hours: 1,743 h, functionality: fully functional, power: 257 kW (349.42 HP), Mobile shredder LINDNER URRACO 75. Rcodpfjydmgdjx Alcef Foldable discharge conveyor, overband magnet, radio remote control. Service new in February 2026.

Condition: used, Year of construction: 2003, CNC External Cylindrical Grinding Machine: total connected load 67 kW, voltage 3x400V 50Hz, nominal current 121A, weight approx. 9500 kg Data Kelvin Chiller (Model KRA45): serial number 0304666, year 2003, cooling capacity 4500W Data Rsdpfx Aezwf Uxslcecf Ritz Coolant Pump (Type F2506): serial number 3196140, manufactured in 1994, 2.9kW

Year of construction: 2019, operating hours: 1,685 h, condition: good (used), Backers 2HTA Star Screen / Lindner ZetaStar 75 – Crawler Mobile & Hooklift System For sale is a versatile Backers 2HTA built in 2019 with only 1,685 operating hours. The machine was manufactured by Backers and was also sold under the name Lindner ZetaStar 75. The machine is ideally suited as a secondary screening unit behind shredders and pre-shredders. It performs especially well when processing bulky waste, commercial waste, green waste or waste wood, as the material is efficiently screened and the oversized fraction can be returned directly into the shredder via the hydraulically swivelable oversize conveyor. This eliminates the need for an additional excavator or wheel loader for material recirculation. Thanks to the flexible star and screen deck configuration, the machine can also be used for screening topsoil, wet clay soil, sand, compost or construction waste. The screening size can be individually adjusted; the machine is currently set up for material smaller than 60 mm. Modifications to the stars and screen deck are available at extra cost. The compact design allows easy transportation via hooklift system. On site, the machine can be repositioned quickly using the crawler track system. Technical Data: * Year of manufacture: 2019 * Operating hours: 1,685 h * 2-fraction screening * Perkins engine 74.5 kW * DEF / AdBlue system * Throughput: >120 m³/h * Operating weight: approx. 12 t * Crawler mobile with hooklift system Rcjdpsy Ui Ersfx Alcsf Transport Dimensions: * Transport length: 7.50 m * Transport width: 2.55 m * Transport height: 2.70 m Hopper: * Capacity: 2.5 m³ * Dimensions (L x W x H): 2.80 m x 1.20 m x 1.00 m * Loading height: approx. 3 m Screen Deck: * Dimensions (L x W): 4.20 m x 1.20 m Special Features: * Hydraulically swivelable oversize conveyor * Direct recirculation of oversized material into the shredder * No additional wheel loader required for recirculation * Adjustable screening sizes available * Suitable for various materials * Compact and highly mobile design The machine is in good condition and ready for immediate use. Ideal for recycling companies, composting operations, wood processing, waste management or earthmoving businesses. Viewing and test operation possible by appointment. If interested, please feel free to contact us. Notes: * Sale excludes any warranty or guarantee. * No returns or renegotiations. * Subject to prior sale. * All information provided without guarantee. The seller accepts no liability for errors, omissions or changes in the description. * Sale is subject to prior sale at any time.

Condition: like new (used), Year of construction: 2019, operating hours: 66 h, functionality: fully functional, Size 60 x 75 cm, Presscenter XL 2, program-controlled wash-up device for inking rollers, blanket wash, and impression cylinder wash, Alcolor Vario dampening system, Combistar air-cooled cooling and recirculation unit, Autoplate, antistatic device in the feeder, double sheet detector, Weko AP 262 powder spray unit, AMS LED UV dryer, maximum paper thickness 0.8 mm, maximum speed 15,000 sheets/h, perfecting 2-3 or 5- Rsdoykr Rzopfx Alcjcf

Condition: used, Year of construction: 2020, Digital UV Coating and Finishing System MGI JETvarnish 3D Evo 75 Maximum sheet size: Rcjdpfszqyrrex Alcsf 1,200 × 750 mm Processable material: 135–800 g/m² Coating unit: 135–400 g/m² Suitable for coated and uncoated papers and cardboard, pre-coated as well as laminated/cashed substrates, and suitable plastic media. Coating: Varnish High-Gloss clear coat 18-liter tank Coating layer thickness: 7–232 µm Digital UV coating finishing, partial and full-area coating, as well as 3D/relief coating effects. Machine is operational and available for immediate delivery. Location: Western Europe Price on request.

Condition: used, Year of construction: 2011, operating hours: 122,000 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 12.5 bar, ambient temperature (max.): 46 °C, noise level: 70 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Product description: GA75VSDFF A 13 APB 400 50 Product number: 8152400050 | 0000090680 | 00000614 | 00000602 Date of manufacture: 23/06/2011 Cooling: Air-cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Integrated dryer: Yes (Y) Mk5 expansion module: Yes (Y) Model variant: Workplace Full Feature (W_FF) Oil-containing frame: Yes (Y) Pressure vessel approval: CE / ASME (CEASME) Regulation: Elektronikon Graphic (MK5GRAPH) Supply voltage: 400 V (400V) Working pressure: 13 bar (13BAR) Equipped with the following options from the factory: - Refrigerant dryer integrated - Heat recovery integrated - Oil collection tray integrated - MK5 Expansion Module Current operating hours: approx. 122,300 hours Used machine, no warranty Rcjdpfx Aozvqixslcjf

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW Rjdpfx Aox Ap Hpslcscf -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: used, Year of construction: 2009, operating hours: 73,000 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 10 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, type plate available, Product description: GA75P A 10 APB 400 50 Product number: 00000402 | 8152811462 Date of manufacture: 09/30/2009 Model: GA75_08 Product description: GA 75 Brand: Atlas Copco Cooling: Air-cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Model variant: Workplace (W) Rsdpfozvqp Sox Alcocf Pressure Vessel Approval: CE / ASME (CEASME) Regulation: Elektronikon Graphic (MK5GRAPH) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Ex works with integrated heat recovery. Current operating hours: approx. 73,000 hours Used machine, sold as is, without warranty.

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: Rcsdswl Rucspfx Alcjf * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Condition: excellent (used), Year of construction: 2015, operating hours: 355 h, Cold Jet Aero 75 DX Machine We have various new parts in stock for Cold Jet machines. This machine is suitable for industrial cleaning, including both small and very large projects. An advantage of this machine is that it does not rely on new-generation electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine, complete with the following equipment: COLD JET AERO 75 DX DRY ICE (335 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator 2 x Nozzles (NEW) This is one of the best machines in the world. It has no electronics, which is why it is reliable and not expensive to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance services for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice Rcodpfxozkq N Ie Alcjf

Condition: good (used), functionality: fully functional, used spiral mixer Oase SPK 75, in good condition, checked and tested, works flawlessly, for 75 kg flour, with 2 timers, stainless steel bowl, stainless steel spiral, with new cover, engine re-bearinged, 6.6 kW, machine no. 910707 Rjdey S D Ucepfx Alcscf

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper Rcjdjwivdkepfx Alcjf mold is not included EXCELLENT CONDITION

Condition: good (used), functionality: fully functional, tested machine : Power 75 tons Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , . Rsdpfx Aozq Sp Aolcscf new UVV-tested .