Used Mayer Fsk 3020 for sale (398)

Condition: used, mileage: 21,000 km, power: 115 kW (156.36 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 4,798 kg, maximum load weight: 2,692 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 3,020 mm, brakes: constant throttle, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, steel body, short cab, suspension seat, double bench seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, frame cladding, differential lock, rotating beacon, leaf spring suspension, trailer hitch ball head, trailer hitch air + light, lashing eyes, U-shaped protection, swing flaps, sunroof, green environmental badge. Wheelbase: 3020 mm, Body: Meiller 3-way tipper body, Front axle: 4.1 t, Rear axle: planetary gear 325, hypoid, 6.2 t, Differential lock rear axle, Electronic braking system with ABS and ASR, Disc brakes, on front and rear axles, Condensate monitoring, for compressed air system, Stabilizer, under frame, Rear axle, Seatbelt monitoring, Standard cockpit, Pollen filter, ClassicSpace, Rain and light sensor, Driving program economy/power, Mercedes PowerShift 3, Pre-installation for toll collection, Daytime running lights, Engine brake, PTO MB 60-1c, Pump, Meiller pump, 5 pistons, Type 254/1, Lashing recesses, in the tipper body floor, Stability control assistant (ESP), Lane keeping assistant, Active Brake Assist. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Hodszhu Hlspfx Andjnu

Condition: used, mileage: 27,597 km, power: 115 kW (156.36 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 4,798 kg, maximum load weight: 2,692 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 3,020 mm, next inspection (TÜV): 02/2027, brakes: constant throttle, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, steel body, short cab, air suspension seat, double bench seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, frame cladding, differential lock, rotating beacon, leaf spring suspension, trailer hitch ball head, trailer hitch air + light, lashing eyes, U-guard, swing flaps, sunroof, green environmental badge. Wheelbase: 3020 mm, Body: Meiller 3-sided tipper body, Front axle, 4.1 t, Rear axle, crown wheel 325, hypoid, 6.2 t, Differential lock rear axle, Electronic braking system with ABS and ASR, Disc brakes, on front and rear axle, Condensate monitoring, for compressed air system, Stabilizer, under frame, Rear axle, Seat belt monitoring, Standard cockpit, Pollen filter, ClassicSpace, Rain and light sensor, Driving program economy/power, Mercedes PowerShift 3, Pre-equipment for toll collection, Daytime running lights, Engine brake, Rear axle MB 60-1c, Pump, Meiller pump, 5-piston, Type 254/1, Lashing recesses, in the tipper bed, Stability control assistant (ESP), Lane keeping assistant, Active Brake Assist. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Hnedpfjzhu Hrex Andju

Condition: used, functionality: fully functional, Stemac COMET-1 combination wide belt sanding machine with sanding belts, working width max. 1300mm, workpiece thickness max. 160mm, workpiece thickness min. 3mm, as per images and inspection, self-dismantling Hnsdpfezh Naaox Andeu Color: green Condition: used Payment method: prepayment by bank transfer Location of goods: carpentry workshop/hall 2 Shipping: Self-collection only - No shipping is offered for this item!

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Hodpfx Aszp Sz Asndjnu Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: new, gearing type: other, color: black, suspension: air, driver cabin: other, Vehicle location: Bovenden NHZF 9010-15 Eco-P Serial number: 3020 130534288 ID1-N102/ID2-SN3020/ID3-10006/ID4-36102104 27.58.502.006 9-ton trailer axle, air-suspended External length: approx. 2,170 mm Hnsdpfx Aoztz Tisndju New, from old stock. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Hnjdpsyxa Dtjfx Andeu Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 91149160, Year of construction: 2020, operating hours: 9,009 h, load capacity: 1,600 kg, lifting height: 7,400 mm, free lift: 1,850 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,020 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 95 %, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 3,906 kg, Equipment: lighting, seat heater, sideshift, Jungheinrich ETV 216 Reach truck, year of manufacture 2020 with a Triplex mast Details: Jungheinrich ETV 216 Year of manufacture: 2020 Work hours (h): 9009 Mast type: Triplex Lift height (mm): 7400 Freelift (mm): 1850 Build height (mm): 3020 Lift capacity (kg): 1600 Fork length (mm): 1200 - 1900 Weight (kg): 3906 Additional hydraulic vehicle: AH3 Additional hydraulic mast: AH3 Front wheels: Polyurethane Rear wheels: Polyurethane new Battery YOM: 2020 Battery capacity (Ah): 775 Battery voltage (V): 48 Hnedpjzcbvqefx Andou Accessories: Flashing beacon. Telescope forks. Height display. Heated seat. Comments: Full freelift. Capacity with attachment: 1400 kg. Forkpositioner opens from 275 mm to 650 mm. Drive wheel is new.

Condition: new, loading space length: 5,300 mm, loading space width: 2,420 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane Roll-off container in a platform design with aluminum sideboards and a permanently mounted Fassi loading crane ELLERMANN roll-off container according to DIN 30722-1 with aluminum sideboards and crane platform Platform tipper body type K 33 s Internal dimensions: approx. 6.5/5.3 x 2.42 x 1.0 meters, all dimensions are approximate Useful volume: approx. 13 m³ Paint finish: in RAL color according to customer's request ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outside rollers and subframe made of INP 180 Outside rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support reinforced with 10 mm gusset plates ? Crane platform 20 mm thick at the end, length approx. 1,200 mm Reinforcement on the end wall support and subframe inside Additional stiffening on the end support ? End wall inner height approx. 1,000 mm ? Floor made of 5 mm St 37.2 (S235JR) ? Floor spar spacing 500 mm Spar profile U 80 x 50 mm ? Outer profile as a hole strip (a hole Ø 40 mm every 200 mm), Loadable with 500 kg / hole, max 5 tons per side, operable from the inside ? Aluminum sideboards, approx. 1.0 meter high, foldable and removable, 1 x divided in the middle by a removable center post ? Aluminum rear flap, foldable and removable (cannot be driven over) with removable corner posts ? All-around tarpaulin and net hooks ? Container double primed inside and out and double painted in a single color inside and out ? Aluminum sideboards unpainted ? UVV stickers with safety instructions ? Container tested and approved according to DGUV rule 214-017 (formerly BGR 186) ? Container test book (digitized) for documentation of the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection Hodpfx Anjzq Iu Iedenu once the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° All hydraulic cylinders are double-acting Piston rods are hard chrome-plated Double lever system with PROLINK (overextension of the knuckle arm up to 15°) Electronic overload protection device with FX500 6 functions RCH or RCS radio remote control (linear levers) with Display and XP system Emergency stop, as well as optical alarm (90% and 100%) Including digitally adjustable slewing limit FASSI stability control FSC including LMB II Pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable from one side Separate hydraulic tank (90 l) with filter, mounted on the crane base Extendable on both sides, support width 4.60 m, hydraulic support - CE, including M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black Load hook and attachment bridges (short / 500 mm) Driving position: folded transversely to the direction of travel Dead point above the support beam Caution: Note the on-board voltage / 12 V or 24 V, standard 24 V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work light on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose guides / eactive Slewing valve, only for cranes with rack and pinion Quick-release valve for the extensions E

Condition: used, Year of construction: 2005, We offer this used Mayer PS 2 Z control unit, year 2005. Panel saw with a cutting range of 6150 mm. Equipped with a 145 mm scoring saw. Front rotary table included. The machine has been dismantled and is in storage. Manufacturer: Otto Mayer Maschinenfabrik GmbH Model: PS 2 Z Serial number: 0359-00-5800 Year of manufacture: 2005 Condition: used Hjdpfx Anjx N Ua Djdjnu If you have any questions or require more information, feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2022, Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible. Hnodpfxjzc Rdqj Andeu

Condition: used, functionality: fully functional, machine/vehicle number: 34554, Mayer & Cie. RELANIT S single-jersey circular knitting machine. Mayer & Cie. single-jersey circular knitting machine, model RELANIT S, machine number 34554. Manufactured in Germany. NAMEPLATE DATA Nominal diameter: 762 mm / 30 inches Gauge: 28 E Pitch: 0.91 mm Number of needles: 2,664 Manufacturer: Mayer & Cie. Maschinenfabrik, Emil-Mayer-Straße 10, Albstadt (Germany) The nameplate indicates “Made in Western Germany” APPLICATION Single-jersey fabric in fine gauge, suitable for shirts, underwear, nightwear, lightweight outerwear, and fine technical fabrics. Hnsdpszvhx Rjfx Andju RELANIT TECHNOLOGY Relative motion cam system, which reduces friction, extends needle life, and reduces yarn tension. INSTALLED EQUIPMENT REIVAX DC-3 electronic defect detector (Taube, Mataró), with sensitivity, current, defect, needle stroke, memory, stop, and reset warnings. OLI-FOX lubricator (Talleres Guerra, Mataró). Analog control panel with A / B / C revolution display. Autonics FX4S counter. Complete upper rail installed on the machine. CONDITION Complete and assembled machine. It does not need to be disassembled to be removed from the warehouse. Currently, fabric from the last production run is still in the machine. A visit can be arranged for an on-site inspection and operational test. YEAR Approximately 1990, based on the serial number and the nameplate. CE MARKING The machine does not have CE marking. For its commissioning within the European Union, the buyer must carry out the corresponding conformity assessment and, if necessary, the required adaptations. DIMENSIONS AND TRANSPORT Approximate dimensions: Length: 2.70 m Width: 2.00 m Height: 2.70 m Disassembly: No disassembly required Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 40711, Single jersey circular knitting machine, Mayer & Cie. model MV 1, machine number 40711. Made in Germany. NAMEPLATE DATA · Nominal diameter: 914 mm / 36 inch · Gauge: 28 E · Pitch: 0.91 mm · Number of needles: 3168 · Manufacturer: Mayer & Cie., Emil-Mayer-Straße 10, D-72461 Albstadt, Germany · No CE marking 36" DIAMETER WITH GAUGE 28. With 3168 needles, this machine has the highest needle count in the lot. A 36-inch diameter combined with a fine 28 E gauge is designed for wide-width production: mattress ticking, home textiles, shirting, and lightweight outerwear. EQUIPMENT FITTED · Phototex FM8 electronic fault scanner (ITE), CE marked · Senso+ lubricator by EQ Systeme, 5-liter tank · Air filter-regulator · Control panel with start and stop push-button station · Hengstler counters · Top creel Hnodpfx Aszvn S Rjndou CONDITION Machine assembled, currently protected with film for storage. Viewing, inspection, and a running test on-site can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain

Condition: reconditioned (used), Year of construction: 1998, coffin saw with drill Eugen Mayer lignum Eugen Mayer 715 column drills used 1998 Hsdpfx Anekmgpvjdonu Mark: eugen Model: Mayer 715 Description: beveller saw with drilling for Eugen Mayer coffins Year: 1998

Condition: used, Year of construction: 1999, functionality: unexamined, input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 4,200 mm, saw blade diameter: 355 mm, height adjustment type: electric, saw blade bore: 30 mm, overall weight: 5,000 kg, Equipment: scorer, Used Mayer PS9Z panel saw from year 1999 – in use for interior construction until disassembly. Main motor Scoring motor Material pusher with double-finger bundle clamp Cutting length: 4,200 mm Depth: 4,200 mm Hjdjy Ihzlspfx Andonu Air cushion tables (4 pcs) Complete Immediately available, loaded free on truck Low price / for export

Condition: used, Year of construction: 1984, Width: 84in, gauge: E24, yarn feed: EBC, hole needles: GB1-2-3, speed: 1,000rpm, pattern gear: N-gear GB1-4, yarn monitoring: Laser 4080, with brushing unit, an on-site inspection is possible. Hjdpjz Eprujfx Andonu

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, cutting width (max.): 3,500 mm, saw blade diameter: 320 mm, overall weight: 4,800 kg, cutting length (max.): 4,200 mm, Equipment: scorer, TECHNICAL DETAILS Cutting area: 4,200 x 3,500 mm Saw blade projection: 80 mm Saw blade diameter: 300-320 mm Scoring saw blade diameter: 150 mm Saw carriage feed, forward: 5-100 m/min Saw carriage feed, return: 130 m/min Material pusher, forward: 25 m/min Material pusher, return: 80 m/min MACHINE DETAILS Motor power: 9 kW Scoring motor power: 1.2 kW Dimensions & Weight Weight: approx. 4,800 kg EQUIPMENT Label printer Control panel on left side 4 air cushion tables AV license dongle for Ardis optimization Hodpfx Ansyc Sggedonu Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: used, functionality: fully functional, cutting length (max.): 3,500 mm, cutting height (max.): 40 mm, type of input current: three-phase, saw blade diameter: 180 mm, – very good condition TECHNICAL SPECIFICATIONS: – cutting length: 3500 mm – cutting height: 40 mm – cutting width on the right side: 960 mm – saw motor: 3 kW Hnjdow I Efgepfx Andju – milling cutter motor: 1.5 kW – feed motor: 0.75 kW – stepless cutting speed adjustment – blade diameter: 180 mm – cutter diameter: 70 mm – extraction port diameter: 100 mm – upper pressure beam – automatic milling cutter approach – possibility of manual or automatic cutting – overall dimensions (L/W/H): 530 / 205 / 130 cm – weight: ~ 800 kg

Condition: new, functionality: fully functional, power: 18.02 kW (24.50 HP), Maximum precision and high cutting heights with rapid feed rates – this is only possible with an uncompromisingly stable gantry construction. This level of uncompromising stability is achieved by using a proven tubular steel framework. The thick-walled steel tubes are meticulously welded into a complex support frame by our experienced staff, requiring many hours of dedicated craftsmanship. This creates the solid foundation for the high-precision guide rails, along which the saw carriage, weighing several hundred kilograms, will later move. Perfect machine size for your workshop: 3200 x 3200 mm The machine allows the processing of workpieces up to 3200 mm in length and width. This means the saw carriage can execute cuts up to 3200 mm long. The material pusher can also be adjusted up to 3200 mm to the cutting line. Automatic cutting height adjustment up to 118 mm The powerful motor drives the saw blade through material at cutting heights up to 118 mm. For optimal cutting geometry, the blade should project about 10 mm above the workpiece. This optimizes energy consumption, noise emissions, and blade service life—a significant advantage for users. Every machine is therefore equipped as standard with automatic cutting height adjustment. The machine scans the height of the material and automatically sets the saw blade to the correct cutting height. Even when cutting multiple sheets in a stack, the saw blade drive must remain powerful. That’s why we equip our saw with a robust 18 kW (24.5 HP) main saw motor. Motorized, stepless cutting height control including grooving function A positioning drive allows the entire saw unit to be automatically raised or lowered to a set height, expanding production possibilities and ensuring precise grooves. Adjustment is made directly via the operator terminal. Motor: 18.0 kW (24.5 HP), 3x400 V / 50 Hz Optional equipment: - 14: Infinitely variable speed control, 2000–5000 rpm - 95: Pneumatic pressure device, 50–2100 mm - 24: Dust extraction pack on saw carriage for processing gypsum- and cement-bonded materials - 30: Air-cushion table, 2300 x 600 mm (2 units) - 28: Movable machine tables on linear guides and rollers - 40: Number of double-finger pack clamps, opening height 105 mm - 41: Additional double-finger pack clamp, opening height 105 mm - 38: Automatic trimming via laser measurement - 45: Additional double roller conveyor for sagging workpieces - 44: 24" touchscreen control unit - 90: Network connection preparation - 86: Control cabinet in special position - 700: Ardis module 1 - 710: Ardis module 2 - 714: Post-processor - 720: Ardis module 3 - 400: Helical rack for smoother operation - 401A: Saw carriage feed 0.2 m/min–60 m/min, return 80 m/min - 403: Cut length selection via switch - 404: Double pressure beam SL 3200 - 437: Technology database including controlled pressure regulation for pressure beam and pack clamps - 92: Transport preparation for crane unloading Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89. Hnsdpfx Aewfdiyendsu

Condition: ready for operation (used), Year of construction: 2006, operating hours: 80,773 h, total height: 2,400 mm, cutting length (max.): 3,200 mm, Panel saw manufactured in 2006. This MAYER AL160 features a saw blade diameter of 650 mm and a maximum cutting width of 3200 mm x 3200 mm. It has a main saw motor power of 35 kW and offers variable forward speeds for both the saw aggregate and infeed. If you are looking to get high-quality panel cutting capabilities, consider the MAYER AL160 machine we have for sale. Contact us for further details. - Main Saw Motor Power: 35 kW- Saw Blade Diameter: 650 mm- Package Clamps / Collets: 210 mm maximum- Saw Aggregate Forward Speed: 0.2 - 60 m/min- Saw Aggregate Return Speed: 60 m/min- Infeed Forward Speed: 10 m/min- Infeed Return Speed: 20 m/min- Extraction Connections: 1 x 140 mm, 1 x 160 mm- Working Height: 1100 mm- Installation Dimensions: approx. 6280 mm (W) x 6855 mm (L)- Cutting Width/Length: 3200 mm x 3200 mm- Compressed Air Volume: 720 Nl/min- Operating Pressure: min. 5 bar, max. 6 bar- Component Condition Notes: Requires repair/adjustment on 3 package clamps, dust protection curtain, and cutting lips at the saw gap Hedpfxszug Arj Andenu

Condition: used, functionality: unexamined, machine/vehicle number: 503881, bustec ProDAQ 3020-AA USB2.0 Slot-0 interface Hedpfxjxr Df Ee Andenu

Condition: ready for operation (used), Year of construction: 1997, A Raschel warp knitting machine Karl Mayer is available. Working width: 130inch, gauge: E32, yarn feed: EBA-1, guide bar element: C-32-28/P2, guide needle element: Spec-38-45 G105, latch needle element: L-32-93H-0, knock-over comb element: S-32-93H-0, speed: 1800-2000, yarn monitoring: Laser 4080. Including computer. Documentation available. An on-site inspection is possible. Hnedpfxeyz Apdo Andsu

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 31230 12050, functionality: fully functional, pressing force: 120 t, table length: 3,100 mm, oil tank capacity: 190 l, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, We offer this used Dener DMP-CNC/120-3020 press brake, manufactured in 2012. Type: DMP-CNC/120-3020 Bending force: 120 t Bending length: 3020 mm Weight: 8000 kg Year of manufacture: 2012 The machine was manufactured in 2012 and purchased by us as a brand-new unit. Since its purchase, it has been operating in a single company under the supervision of permanent operators. I assess its technical and visual condition as very good – the machine is in continuous operation, well-maintained, clean, and fully functional. Hnjdpfxozuxpdo Andju Key parameters and equipment: • Model: Dener Puma 3100 x 120 CNC • Pressing force: 120 tons • Bending length: 3100 mm • Control: Intuitive ESA S 500 CNC controller with 2D graphics (easy to program, menu in Polish). • Number of axes controlled by CNC: 4 axes (Y1, Y2, X, R). • Back gauge: Automatic, moving forward-backward (X axis) and up-down (R axis), controlled directly from the CNC panel. • Table deflection compensation: Manual. • Tooling clamping: Quick-clamping system, Amada/Promecam (Euro) type, with levers – significantly reduces setup time. • Safety: Full side protection and optical curtains (safety barriers) with CE certification. Technical condition: • Electrical cabinet and hydraulics are in their original condition, with no non-factory modifications or leaks. • The machine has been regularly serviced and has been used for light and medium-sized parts.

Condition: ready for operation (used), Year of construction: 1980, Mayer FS 3 Hodpfxjyh It Rj Andonu Veneer saw Cutting length: 4000 mm Front and rear support tables Extraction duct

Year of construction: 1999, condition: ready for operation (used), A direct warping machine Karl Mayer is available. Working width: 42inch, yarn feeding: NC. Including memory, roller unit and all reeds. Without creel. An inspection on site is possible. Hnodpfx Ajyz Apkjndou

Condition: used, Year of construction: 1964, 200 mm mechanical ja weight 1,5 t Hedpfjyacnvjx Andonu ja