Used Mcconnel Robocut T500 for sale (203)

Condition: used, Year of construction: 2001, center height over bed 500 mm centre distance 6.000 mm bed width 670 mm turning diameter over bed 1.030 mm turning dia. over face-slide 640 mm Max. workpiece weight between centers 5.000 kg Max. workpiece weight between centers (collet) 6.000 kg feed speeds x- and z-axis 6.500 mm/min Psdpfxjzt Szke Abujgu spindle head ASA 15" spindle turning speed range 4 - 830 U/min Torque 6.224 Nm total power requirement 70 kW weight of the machine ca. 11,3 t Headstock: - Front bearing, inside diameter: 235 mm - Rear bearing, inside diameter: 216 mm - Diameter of hole through spindle: 170 mm - Morse taper in spindle sleeve: 6 MK Tailstock: - Quill diameter: 150 mm - Quill travel: 400 mm - Quill morse taper: 6 MK Saddle and cross slide: - Torque AC axes drive motors (X and Z): 17/22 Nm - Max. feed force, X and Z (continuously rated): 2500 daN - Recirculating ballscrew diameter X-axis: 40 x 5 mm - Max. travel, X-axis: 650 mm

Condition: used, Year of construction: 2006, FANUC ROBOCUT ALPHA- OiC WIRE ERODING MACHINE YEAR: 2006 X STROKE: 320.0mm RAPID: 900mm/min Pgedpfx Abezv En Ajusu Y STROKE: 220.0mm RAPID: 900mm/min Z STROKE: 255.0mm RAPID: 900mm/min U STROKE: 120.0mm RAPID: 450mm/min V STROKE: 120.0mm RAPID: 450mm/min MAX. TABLE WEIGHT: 500.0 kgs COMPLETE WITH.... CHILLER SYSTEM COOLANT FILTRATION SYSTEM TRANSFORMER RENISHAW MACHINE MANUALS

Condition: ready for operation (used), functionality: fully functional, From a workshop for people with disabilities: Functionality tested. Shrink tunnel + angle welding machine from AVC. Model HS 500 + KT 500 gas. Shrink tunnel, 380 volts. Angle welding machine, 220 volts. Individual purchase also possible. Podpfozdq Nujx Abuegu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 5,000 kg, Welding positioner with 5-ton load capacity, in excellent condition, complete set including dual foot remote control and hand remote control. Tilt and rotation speed steplessly adjustable from 0.05 – 1.0 rpm. Clamping plate diameter: 2.0 meters. Height when tilted to center approx. 1.18 m (plus pedestal 0.1 m). Height horizontal approx. 1.4 meters. Length 2.2 m, width 2.0 m. Pgjdexxu Drepfx Abueu

Condition: ready for operation (used), functionality: fully functional, Danfoss VLT5004 – Type 175Z0052. 12 units in stock. Psdpfx Abozu Ri Ajuegu We have a wide range of Danfoss frequency converters available, including this model: VLT5004 (175Z0052). We have added an overview with photos to this advertisement. Additionally, it is possible to request extra photos of a specific component. Please send us a message for this. A PDF file has also been added, containing an overview of all Danfoss parts that we currently have in stock. Do you have any questions or are you looking for a specific Danfoss part? Please feel free to contact us. We will be happy to assist you.

Condition: ready for operation (used), functionality: fully functional, Danfoss VLT5004 – Type 175Z0052. Without display. 11 units in stock. We have a large selection of Danfoss frequency converters available, including this type: VLT5004 (175Z0052). We have added an overview with photos to this advertisement. Additionally, it is possible to request extra photos of a specific component. Please send us a message for this. A PDF file has also been added, containing an overview of all Danfoss parts that we currently have in stock. Pgedpfxezu Rlko Abusu Do you have any questions or are you looking for a specific Danfoss part? Please feel free to contact us. We will be happy to assist you.

Condition: used, Year of construction: 2005, Weinig Unimat 500 Moulding machine Description; Dimensions of the infeed table: 2500 mm Number of axes: 5 Spindle Sequence: Bottom-right-left-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 24m/min Groove bed: No Other comments:- Podpfxjw Ebacj Abujgu (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Year of construction: 2018, condition: ready for operation (used), A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible. Pgsdpfou Dm Izex Abuou

Condition: good (used), Year of construction: 2007, - Planing width (mm): 230 - Planing height (mm): 140 - Spindles: 6 1st spindle: bottom 2nd spindle: right 3rd spindle: left 4th spindle: top 5th spindle: top Pgedpfx Ajy Ayg Aebuju 6th spindle: bottom - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planing heads Powerlock system - Program memory - Soundproof hood - CE compliant

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Pgodez E Nh Nopfx Abueu Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: like new (used), Year of construction: 2018, Dynajet 500th Pressure Washer Year of manufacture: 2018 Max. temperature range: 95°C Brand: Dynajet Mobile: yes Serial number: 62005720 Type: 500th Maximum working pressure: 500 bar With remote control; water tank 1000 l; unladen weight 1420 kg; approx. 30 m high-pressure hose; approx. 25 m filling hose; operating hours: 597 hours; Pjdpfx Absyigr Ueuegu tested and fully functional

Condition: good (used), vacuum furnace, chamber furnace Pgsdpfx Aboif Sbiousu -Vacuum furnace: with vacuum pump -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm -Weight: 180 kg -Control: Two-point control using program control

Condition: used, machine/vehicle number: 008406, Max. panel width: 1000 mm Pgodpfx Aeyl Ihxobuju Max. panel length: 2500 mm No of injectors: 12

Condition: like new (used), Year of construction: 2025, functionality: fully functional, COST-CUTTING OPTIMIZING SAW The Supercut 500 is a high-speed optimizing saw designed to deliver maximum production capacity with outstanding reliability. Pgodpoy Iz Hnefx Abuou EXTREMELY ROBUST The machine features a highly robust, reinforced steel frame. The infeed belt conveyor is synchronized and driven by the same motor as the feed rollers. An exclusive system ensures solid double-sided top and bottom traction. The upper feed system includes three hardened, toothed drive rollers and six idle pressure wheels (in three pairs). Each toothed roller's rise and descent are managed by numerical control. TECHNOLOGICALLY INNOVATIVE The electronic system integrates a computer directly connected in real time to a next-generation CNC (numerical control unit). The TROPTIM software runs on Windows and offers full management of up to five wood grades. Equipped with a 22” color LED display, remote internet teleservice, and integrated Excel macros. FAST An innovative cutting system achieves such high speed that the blade is almost invisible during operation. Rapid, comprehensive optimization with a compact overall footprint. Feed system equipped with an 18 Nm brushless servo motor. Cutting system uses a 28 Nm brushless servo motor. Saw blade power: 7.5 HP (5.5 kW). Eight idle rollers positioned under the belt of the infeed conveyor. CUTTING DIMENSIONS Cutting section: min. 30x15 mm, max. 220x60 mm. Minimum workpiece length before cutting: 500 mm, maximum: 5000 mm (up to 6000 mm with optional support rollers). Capability for a single cut in the last 190 mm of the board. Suitable for boards of regular profile with a maximum thickness variation of 8 mm. Maximum timber weight: 50 kg.

Condition: used, mileage: 2,314 km, power: 118 kW (160.44 HP), first registration: 04/2025, overall weight: 10,400 kg, fuel type: diesel, next inspection (TÜV): 04/2027, gearing type: automatic, emission class: euro6, Equipment: air conditioning, navigation system, 50 km/h version: suspended and soundproofed driver's cab, air-suspended driver's seat, steering column adjustable in height and angle, window in the cab floor, 7" color display with multifunction indicator, reversing and suction mouth camera, 2x LED reversing lights. 80 km/h version, CD radio with Bluetooth and including TomTom navigation, pulled suction mouth in front of the front axle 400mm adjustable with the side brushes left and right, 3rd front brush, stainless steel container with integrated suction fan 4.3m³, high-pressure water system with lance, 4.8m suction hose on the sweepings container that can be rotated 360°. Fresh water tank 880l, sweepings container 930mm tipping height. Pgodpewcikksfx Abueu

Condition: used, mileage: 6,092 km, power: 28 kW (38.07 HP), gearing type: mechanical, fuel type: diesel, color: blue, empty load weight: 2,340 kg, number of seats: 1, first registration: 01/1963, total length: 3,550 mm, total width: 1,720 mm, total height: 1,730 mm, driver cabin: other, Vehicle location: Bovenden. Psdpfevhh Aqsx Abuegu The Granit 500 is a tractor produced by Hanomag in the 1960s, which replaced the R 332 Granit. During its production period, the engine output was increased to 40 hp by increasing the engine speed. One year later, the design of the engine hood was changed. Water-cooled, four-stroke, three-cylinder diesel engine, type D21 CR with vortex chamber process, wet cylinder liners, oil bath air filter, four-bearing crankshaft, overhead valve design, pressure lubrication system, strainer filter, centrifugal governor, and two-circuit thermostat cooling. The engine was overhauled approximately 150 operating hours ago! Approximately EUR 2,000.00 was invested in the engine and other technical components. Very original condition. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: used, total width: 3,580 mm, total height: 1,840 mm, Year of manufacture: 2006 Colour: Grey Empty weight: 3.500 kg Dimensions (LxBxH): 180 x 358 x 184 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 106992 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 30 - - Max. planing block diameter [mm]: 130 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Tool present: Yes - Max. planing width [mm]: 240 - Max. planing height [mm]: 130 - Feed table length [mm]: 1780 - Feed roller diameter [mm]: 130 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Max. feed speed [m/min]: 4 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 88 - Fuse [A]: 100 - Power [kW]: 41.0 - Transport dimensions: 1800mm x 3580mm x 1840mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Podpfezguqzjx Abuegu Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, Cylindrical Grinding Machine Manufacturer: JUNKER Model: Jumat 5002/10 CNC Year of manufacture: 1998 Control system: Fanuc Equipment & Accessories: - Extraction system - Felsomat loading system An accessory package can be purchased separately. In our assessment, the machine is in very good used condition and can be inspected under power by appointment. Accessories, pictured tools, and workholding devices are included in the scope of delivery only if noted in the additional information. Pedpfoxc Nyvsx Abuogu Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1998, Cylindrical Grinding Machine Manufacturer: JUNKER Model: Quickpoint 5002/10 Year of manufacture: 1998 Control system: Fanuc Equipment & Accessories: - Extraction system - Felsomat loading system An accessory package can be purchased separately. 2 identical machines are available. In our assessment, the machines are in very good used condition and can be inspected under power by appointment. Pgjdpfx Asxc Nypobuju Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: GER, Technical data: 1 Abus VS column-mounted slewing crane, nominal load 500 KG Maximum load at full outreach: 500 KG / 0.5 tons Height: approx. 3.8 m, under jib: approx. 3.4 m Outreach: approx. 4 m, hook height: approx. 3 m Base plate approx. 60x60 cm Total weight approx. 700 kg Including Abus GM4 chain hoist (year of manufacture 2018) with pendant control (2 lifting speeds) Pgjdpfxjy Hgnno Abueu Connection: 400V 16A, slewing range 360° Crane is disassembled and immediately available Article location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping via forwarding agent or collection by appointment

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2026, overall weight: 49 kg, total length: 600 mm, total width: 500 mm, total height: 850 mm, Work table AT 500, drawer cabinet TOP work table, catering bakery table Stainless steel design with 3 drawers Drawers with integrated handle strip Dimensions approx.: 500 x 600 x 850 mm, W x D x H Used, like new Option: Delivery service Castors/wheels, new Pjdpfx Abjyhy H Aousgu Visit our large showroom!

Condition: ready for operation (used), Year of construction: 2005, operating hours: 32,000 h, Offered is a 3-axis CNC tube flame cutting system. Tube diameter: 60mm-500mm, square profiles X/Y: 420mm/420mm, tube length max.: 4500mm, wall thickness max.: 1mm-20mm, cutting speed max.: 24000mm/min, positioning accuracy: approx. 0.5mm, clamping force of the chuck: 30000N, torque max.: 13000Nm, cutting system: Hypertherm Powermax 1650, controller: Burny 10 LCD Plus, machine dimensions X/Y/Z: approx. 4000mm/2000mm/1800mm. The controller has a defect and is currently without function. Viewing possible by appointment. Pjdpfxsy Ax T Uo Abuegu

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: Pedpfxsz Dn Sks Abuegu 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: used, operating hours: 7,545 h, mileage: 72,086 km, power: 115 kW (156.36 HP), first registration: 12/2009, overall weight: 10,500 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 5,400 kg, empty load weight: 5,100 kg, wheelbase: 2,450 mm, brakes: other, driver cabin: other, gearing type: automatic, emission class: none, loading space volume: 4 m³, number of seats: 2, Equipment: ABS, air conditioning, cabin, onboard computer, soot filter, * German machine * 1st owner * original 72,086 km * only 7,545 operating hours * Condition: see photos * Bucher sweeper City Cat 5000 * Adjustable 3-disc brush system * sweeping width up to 3,780 mm * High-pressure washer with lance: Stubborn dirt can be easily removed with the high-pressure lance, and walls can also be cleaned using minimal water and high pressure. * The high-dump function of the debris container allows emptying into large containers, skips, or directly into refuse collection vehicles, greatly increasing efficiency. * All instruments in the cab are ergonomically arranged and easy to operate. The adjustable steering column allows for comfortable entry and optimal working position. * The integrated floor window in the cab provides an unobstructed view of the suction nozzle and swept material. * 4 m³ stainless steel debris hopper * 800 mm wide, laterally adjustable suction nozzle * Large-capacity 880-liter fresh water tank, positioned for a low center of gravity * Pre-spray system * Disc brush diameter 750 mm * Working speed 0–20 km/h * Four-wheel steering for a very tight turning radius (2,950 mm) * Air conditioning * Floor window * EasyDrive (hydrostatic drive) (SN) * Joystick control * LED work lights * Rotating beacons * 110-liter diesel tank * Reversing camera * Air-suspended comfort seat * Stereo CD * Wheelbase 2,450 mm * GVW 10,500 kg * Unladen weight 5,100 kg * Payload 5,400 kg Pgsdpfexixi Hex Abueu * For sales to commercial customers and for export (non-EU and EU), German commercial codes of practice apply. If a new TÜV inspection is required, we are happy to offer a quote from one of our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and highly recommend viewing and inspecting the goods to ensure the buyer forms an accurate understanding of their condition and suitability. Viewing and inspection are possible by appointment at any time and are explicitly encouraged. All information is provided without guarantee. No liability for errors or incorrect information in this advertisement. The buyer is obliged to independently inspect the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 27,218 h, spindle speed (max.): 3,600 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 930 mm, overall weight: 2,300 kg, controller manufacturer: HEIDENHAIN, controller model: TNC 410/426, positioning accuracy: 0.003 mm, swivel angle C-axis (max.): 360 °, number of axes: 3, This 3-axis SPINNER MT 500/1000 AT was manufactured in 2000. It features an X-axis travel of 210 mm, and Z-axis travel of 930 mm. The machine includes a robust table size of 520 x 900 mm with a load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MT 500/1000 AT machine we have for sale. Contact us for further details. • Machine/Mechanic MT500-1000 • Travel X-axis: 210 mm • Travel Z-axis (Multifix holder + manual chuck): 930 mm • Travel Z-axis (Multifix holder + hydr. chuck): 930 mm • Travel Z-axis (Turret + manual chuck): 930 mm • Travel Z-axis (Turret + hydr. chuck): 930 mm • Travel C-axis: 360 degrees • Spindle clearance 45 mm with hydraulic chuck: 3600 rpm • Spindle clearance 57 mm with manual chuck: 3600 rpm • Tool system Haase quick-change holder: 1 tool unit • Tool system Turret VDI 30: 12 tool units • Ball screw pitch in X: 5 mm Psdoyxrndepfx Abujgu • Ball screw pitch in Z: 10 mm • Rapid traverse X: 15000 mm/min • Rapid traverse Z: 20000 mm/min • Feed rate X + Z: 0-4000 mm/min • Feed force X-axis: 1382 daN • Feed force Z-axis: 609 daN • Tensile force hollow clamping cylinder: 145 daN/bar • Manual chuck Ø 200mm: 3 jaws • Hydraulic chuck Ø 210mm: 3 jaws • Coolant tank volume: 75 l • Coolant pump flow rate: 30 l/min • Coolant pump pressure: 1.4 bar • Max. positioning scatter: 3 µm • Max. backlash: 2 µm • Positioning uncertainty: 2 µm • Max. circularity error on workpiece: