Used Mortise And Foiling for sale (6,890)

Year of construction: 2000, condition: used, Foil wrapping machine OMG Autofard Year: 2000 Description: - Straight infeed - Foil unit Fodpfx Aoku H Aijayjpl - Shrink tunnel Maximum speed 15 piles/products a minute

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off Fpsdpfxeff Huwj Aayjl • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Fedpfx Aajh Uyg Noyspl

Condition: excellent (used), Year of construction: 2017, Ref: 11038 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fjdpfx Aoxyxr Noayspl Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 74 h, machine/vehicle number: PC16 / P1551, Screw compactor and two 16 Cu Mtre closed skip units all manufactured to the highest specification by De Rooij in the Netherlands. All the equipment has been used inside a security shredding unit since new. It was decommissioned in 2023 and has only seen 74 hours of use since new. This equipment has been used by a bank for shredding currency and confidential wastes, and always situated inside a secure building. All in excellent condition and perfect working order. Fpedpfx Aaev Ilphjyjl

Condition: excellent (used), CN LINE of Cutting-Off and Tenoning-Mortising for 5-pieces front drawers or kitchen front doors 200037A) Optimizing Defecting Cut-off Saw "OMGA" Mod. Optima 120 SNC 4000 Workpieces Width x Thickness: mm 200 x 110 / mm 245 x 80 / mm 275 x 50 / mm 300 x 14 With: CNC, pusher feeding system, pneumatic tail clamp, outfeeding with motorized conveyoring carpet No. 1 Working unit (Circular Saw, max diameter mm 450/500) power Kw 4,6 (ca.) 200037B) CNC Double-end rouding Tenoning + mortising machine "BALESTRINI-CMS" Fox Lynk Workpieces Width x Thickness: MIN. mm 38 x 20 / MAX. mm 75 x 25 With: CN, hooper-feeder, out-feeding movable pusher No. 2 Working Units: 1st with shaping (tenons) + drilling (mortises) / 2nd with shaping (tenons) Fodpszxn S Ajfx Aayjpl 200037C) Automatic Glue applicator "GANNOMAT" Mod. Injecta II No. 2 Glue injecting units: 1 at left-hand + 1 at right-hand 200037D) Rotary Cope and Stick Door Clamp "DOUCET" Mod. RDM-TM 5 30-72 Machine designed for quick and accurate assembly, clamping and squaring of cabinet doors With 5 stations, to assembly large pantry doors up to mm 750x1800 down to drawer fronts mm 137x312

Condition: used, functionality: fully functional, With this offer, you are purchasing a used black-and-white production system, the “OCE VarioPrint 6180 Titan.” Items for Sale: 1x OCE VarioPrint 6180 Titan with the following features: Includes 2x HC52 finishers Includes 3x Pims paper decks Meter readings: Total: Approx. 39,188,579 pages Condition: This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping available upon request! Fjdozqnb Uopfx Aayspl A functional test will be recorded on video for you before shipping or pickup. For more information, please feel free to contact us directly.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2026, loading space length: 20,440 mm, loading space width: 2,540 mm, loading space height: 2,830 mm, total width: 2,540 mm, color: red, Year of construction: 2026, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Air suspension - Disc brakes = Notes = New and unused Kässbohrer flatbed semi-trailer with ABS/EBS. BPW axles with sliding brakes, extendable to 6.90 m, 3rd axle = steering axle (trailing axle), hardwood floor, 11 lashing points per side, 10 pocket slots per side, lashing points in the longitudinal beams, 1 toolbox, steps on the right, unladen weight: 9,350 kg, permissible total weight: 45,000 kg, tires: 385/65-R22.5 (L: 16/16/16 mm; H: 16/16/16 mm), Dutch registration with valid main inspection until 04/29/2027, year of manufacture: 08/2023 = Further Information = Axle configuration Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 9,350 kg Payload: 35,650 kg GVW: 45,000 kg Functional Body brand: Kässbohrer LB3E Extendable body: Yes Maintenance, History and Condition APK (Technical Inspection): valid until 04/2027 Technical condition: very good Optical condition: very good Identification License plate: OX-78-HF Further information Fedpozdirijfx Aayepl Please contact Arne Honingh for more information.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Complete Kempner automatic L-sealing, shrink wrapping and labelling system, manufactured in 2024 and in excellent working condition. This system comprises of the following machines: 1 x Kempner automatic L-sealer. Model - ZF-A6345-T. Serial number - 13677. Sealing bars - 560mm x 380mm. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2.5 kW. Fpjdpjyrup Ajfx Aayel 1 x Kempner shrink heat tunnel (electric). Model - ZF-S550. Serial number - 22097. Electrical requirements - 380 V / 50 hz / 3 phase. Power - 12 kW / 27 Amps. 1 x Kempner automatic easy tear label applicator. Model - ZD-L1. Serial number - KL-24022-4. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2 kW. This system was previously used to pack donuts and was in production for approximately 9 months in total. Manufacturer - Kempner.

Condition: used, Fish Filleting and Heading Machine Make: VMK Fedpfjzi Tl Njx Aayjpl Model: 18 + 181 With spare parts Working order, as back from factory

Year of construction: 2016, condition: excellent (used), Polish machine built to a high standard, full touchscreen controls. 4 lane linear pot filling and sealing line. Has been filling foil pots of pate. Perfect for pate, animal foods, meat paste etc. In nearly new condition. Fsdpfjht Hlljx Aayopl

Condition: good (used), Year of construction: 2018, lifting height: 14,350 mm, fuel type: diesel, Weights Empty weight: 3.350 kg Functional Lifting capacity: 200 kg Working height: 1.635 cm Working width: 212 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 990 m Max swing of platform in degrees: 350 Additional information Please contact Christian Theißen for more information Manufacturer: Multitel Model: 160ALU Year of build: 2018 Condition: Used Data: Max. working height: 16,35 m Max. platform height: 14,35 m Max. reach: 9,90 m Total dimensions LxWxH: 6,78 x 2,12 x 2,80 m Platform dimension WxD: 1,20 x 0,70 m Max. basket load: 200 kg Swivel range of the upper carriage: 350° Ground clearance: 0,20 m Support width vertical: 2,17 m Support length: 3,28 m Ground pressure: vorne: 24 kN / hinten: 12 kN Driving license category: B / 3 Empty weight: 3.350 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket, loading area with side walls, box body for materials: 1.50 x 0.50 x 0.50 m. Fjdpfxoznlcwj Aayepl Information: 8672 front damage Information: Tüv und UVV new Location: 41468 Neuss immediately available

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 3100 Press” color production system Items included: 1 x Xerox Versant 3100 with the following equipment: Includes Fiery Server EX3100 (NX Pro-02) Includes Paper Deck A-CF03 Includes A-GW04/A-GW04/A-FN13 finisher Includes duplex unit Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Counter readings: Total: Approx. 1,682,602 pages Color: Approx. 1,190,093 pages Black: Approx. 492,509 pages Condition: Fsdpfsvf Hhyex Aayepl This listing is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, you’re welcome to contact us directly.

Condition: used, This listing is for the CEM Smart Trac II System Fpodpoxv Agisfx Aaysl Details to follow

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Fpsdpfxjzyz Dbs Aayol Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Fedpfx Aaeyvav Noyspl

Condition: good (used), Line was filling jars with chutneys and fruit sauces. Lovely condition. Fedpetux H Iofx Aayopl

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Fpjdeyvau Espfx Aayel

Condition: good (used), Several hundred retort trolleys with trays. Lovely condition. Fpsdpfx Ajr Iyu Tsayjl

Condition: new, Unused bin washer. Bought for a contract which never materialised. Fedetpv T Nspfx Aayepl

Condition: good (used), Handtmann VF628 vacuum filler with PVLS143 high speed linker cutter from 2021 and GS300 auto tray loading system consisting of GM310 and ZB311. Rarely available. We can offer an additional similar setup with VF622 instead of VF628. Fpjdpfx Aasvvxumsyjl

Condition: excellent (used), Year of construction: 2016, Polish machine built to a high standard, full touchscreen controls. 4 lane linear pot filling and sealing line. Has been filling foil pots of pate. Perfect for pate, animal foods, meat paste etc. In nearly new condition. Fpjdpfxehp Apdo Aayel

Condition: reconditioned (used), functionality: fully functional, Spiralmixer Diosna SPV 240 AF with 2 bowls - 240kg dough, - after recondition Fedpfox H Tr Hex Aayjpl With Diosna bowl lift

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Fpjdpfeza U Nfjx Aayol Technical Specification Bending Length 4250 mm

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power of the milling unit: 5,000 W, input current: 200 A, chain width: 70 mm, input frequency: 50 Hz, Double-sided profiling milling machine for producing tenons, with a slot width, minimum processing width of 70 mm, length of 2500 mm, and 5 machining units per side, with belt-type clamping. Cutting tools not included. Fsdpfx Aaszy I Tcjyspl