Used Moving Bezel for sale (2,241)

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad Chodjxabpdepfx Al Ajc blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: round 120 mm vice 285 mm turning speed range: 36 / 72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 370 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device Cjdpexaa H Iefx Al Ajhc

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms Codpoxaa I Sefx Al Ashc - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: good (used), Year of construction: 1989, sheet width 2520 mm plate thickness 2.5 mm bending angle max. 135 ° stroke of upper beam 250 mm Chsdoy Raiyepfx Al Asc adjustment UW 80.0 mm back stop - adjustable ca. 925 mm work height max. ca. 935 mm total power requirement 6.0 kW weight of the machine ca. 2500 kg. dimensions of the machine ca. 3600 x 1650 x 1425 mm good condition (!!) with 1x split set of goat foot tools Equipment: - dynamic, powerful motorized folding machine - SCHRÃ?DER NC control unit "POS 800" with LCD display * Fast programming of individual parts - Control panel, front right - NC electro-motorized back gauge * with rear sheet support surface - Manual lower beam adjustment - 1x free-moving double foot switch - 1x extra bending machine .. B = 10.0 mm * built-in bending rail with .. B = 25.0 mm - 1x split set of goat foot tools ... H = 130 mm * a pointed rail is installed - Operating instructions

Condition: good (used), Year of construction: 2001, sheet width 2520 mm plate thickness 3.0 mm 350 mm Swing beam adjustment 80.0 mm back stop - adjustable ca. 1.000 mm Control FM 5.1 B upper clamping bar adjustment 20.0 mm/sek bending speed 37.0 Grad/sek Chsdpfx Aoy Umd Sol Aoc total power requirement 4.5 kW weight ca. 3.250 kg The ideal solution for individual and series production. A modern design with particularly high rigidity. Designed for continuous performance. Features: - Dynamic, powerful electro-motorized folding machine * Upper beam bending beam drive by geared brake motor * Bending beam drive with roller bearings - FASTI CNC control "TOUCH" - FM 5.1 B * Swiveling control unit, front right * 11.3" color LCD touch screen display * Manual / automatic mode selectable * Input of actual/target values possible (X axis / angle etc.) * Program memory * Tool memory - CNC electro-motorized back gauge * with rear sheet support surface - CNC electro-motorized folding beam adjustment - 1x extra set of FASTI split scribing tools - height : 120 mm - EMERGENCY OFF button at the front, with extension cable - 1x free-moving double foot switch - 1x free-moving foot switch - original operating instructions - Smallest bending leg length in mm to sheet thickness : * 7.0 mm with 0.75 mm sheet thickness * 8.5 mm for 1.00 mm sheet thickness * 12.0 mm for 1.50 mm sheet thickness * 16.0 mm for 2.00 mm sheet thickness * 19.5 mm for 2.50 mm sheet thickness * 25.0 mm for 3.00 mm sheet thickness

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) Csdpfx Aei Db Ersl Ajhc and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Year of construction: 2021, operating hours: 30 h, condition: like new (used), functionality: fully functional, 1 x Unifiller Systems Inc. food depositor mounted on a mobile height-adjustable frame. This is a compact, versatile machine which is easy to clean for a quick product changeover. Handles most fillings without particulates Manufacturer - Unifiller Systems Inc. Model - iSpot. Serial number - ISP103177-001-01. Date of manufacture - 2021. Depositing range - 35ml to 237ml (2'' cyclinder). Cjdpfx Aleyv E Rys Ajhc Speed - adjustable, up to 150 deposits / minute depending on product type and volume. Operating temperature - up to +60C. Fits containers up to 23” deep (80 quart Hobart bowl). Condition - full working order and excellent condition for its age. Used sporadically over a period of around 5 months and is believed to have had less than 30 hours of run time.

Condition: used, Year of construction: 1962, serial number 813 stroke 160 mm automatic feeds ja Cjdoz Alc Hjpfx Al Ajhc cross-moving table 2-Achsen weight of the machine ca. 1,2 t

Condition: excellent (used), Year of construction: 2008, BÖSCH/HEWEMA universal miter fence A97 for panel saws When in the closed position, 90° angle cuts are performed. When adjusting the cutting angle, the two fence profiles are moved synchronously. Cuts can be made on both the front and rear supports. Chjdpfezbytlsx Al Ajc The saw angle is read on the scale disc.

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. Chedju Id H Aspfx Al Aoc There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm *

Condition: used, Year of construction: 1990, Technical details: pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2630 mm control for program: CNC-Steuerung CYBELEC max. stroke: ca. 215 mm throat: 255 mm dayligth: 410 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back gauge: 500 motorisch table-size: 3100 x 60 mm work height max.: 890 mm connection voltage: 3x380 V / 50 Hz V Chodpfxou Icdae Al Ajc total power requirement: 5,5 kW weight of the machine ca.: 7,9 t machine dimensions LxWxH: ca. 3,8 x 1,5 x 2,5 m 500 mm backgauge, width 2570 mm; 2 support frames can be moved manually across the entire width Operation via control panel and/or control stand for two-hand/foot operation Control also via manual control unit incl. accessories in stock i.D. *

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec Codpfeu Nfq Eox Al Ajhc ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 25156F, Mobile hydraulic tilting lift Wortmann HKV-S | DIN + 2x 240 liters | 1,400 mm For sale: mobile hydraulic tilting lift from Wortmann Milieutechniek, type HKV-S. This tilting lift is equipped with multiple attachments, making it versatile for use with various waste containers. The machine has a DIN attachment for roll-on/roll-off containers and also an attachment that allows two 240-liter containers to be tilted simultaneously. With a pivot point height of approximately 1,400 mm, the tilter is very suitable for emptying containers into, among other things, compaction containers, waste compactors, bins, and other collection systems. The complete installation is mounted on swivel casters, making it easy to move and use in different locations within a company. The moving parts are fitted with safety guards on both sides. Technical specifications: Brand: Wortmann Milieutechniek Type: HKV-S Year of manufacture/overhaul according to nameplate: 2018 Power supply: 400 V Motor power: 3.0 kW Fuse rating: 16 A Pivot point height: approx. 1,400 mm Own weight: approx. 750 kg Max. load weight: 650 kg Color: RAL 7016 Hydraulic drive Mobile design Csdpoz Ern Eefx Al Aohc Container attachments: DIN attachment for roll-on/roll-off containers Attachment for 2 x 240-liter containers Hydraulic lifting and tilting system A reliable and flexible solution for companies that want to empty various waste containers at a single, fixed tilting height. The machine is in used condition and can be inspected and tested by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: tilting lift, container tilter, waste container tilter, DIN tilter, 240-liter tilter, 2x 240 liters, roll-on/roll-off container tilter, hydraulic tilter, mobile tilting lift, container lift, waste processing, compaction container, Wortmann HKV.

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. Chodpfx Aeyq Sztol Aec 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. Option: New Oppold tool set for H500. The customer reused the existing tooling—previously employed on this H500—for their new machine. A brand-new tool set, matching the programming already established on the machine, costs €50,000. -Windows Timber windows IV 68, 78, and 88 (inward-opening), with stepped rebate on sides and top. 20 mm glazing rebate; frame and sash profiles with 20° slope For loose and integral glazing beads Renovation-style timber windows IV 68, 78, and 88 (inward-opening), without rain rail, with stepped rebate on sides, top, and bottom. 20 mm glazing rebate; frame and sash profiles with 15° slope Attached drip rail Timber-aluminum windows (System provider: Gutmann Mira, sloped rebate system) HA IV 68, 78, and 88, inward-opening; 2 sash variants: square and sloped, Stepped rebate at bottom, sides, and top -Entrance doors Timber entrance doors (IV 68, 78, and 88) with single rebate in frame a...

Condition: used, Pneumatic pick and place manipulator, loading unit similar to a SCARA robot with a parallel gripper. Handling device, handling system, pick-up gripper, loading gripper for automation. Horizontal axis with guide cylinder, linear module type SM 32/150 (column module GEMOTEC). Vertical axis with guide cylinder, linear module type SM 20/060 (column module GEMOTEC). Parallel gripper type GMP 20. Load capacity: max. 2 kg. Horizontal movement: 150 mm (pneumatic). Vertical movement: 60 mm (pneumatic). Vertical adjustment on the two support columns: 435 mm (manual, with clamping). Support columns, vertical guide column: Ø 45 mm. Guide column, linear module type SM 32/150: Ø 20 mm. Guide column, linear module type SM 20/060: Ø 12 mm. Mounting foot: 180 x 75 mm. - Can be moved pneumatically in two axes. - Part gripper, parallel gripper type GMP 20 (65 x 35 mm). Space requirement L x W x H: 550 x 160 x 550 mm. Weight: 17 kg. Very good condition. Chjdez D Hxijpfx Al Asc Various manipulators available, see our webshop.

Condition: new, new ! all stainless steel 2 speeds 2 mixing directions 1,8 kW – 2,5 kW safety lid Suitable for loader with “Easy Connect” Easy clean Hinged safety gard CE-approved overall dimensions (l x w x h) : 1.676 x 830 x 1.428 mm (open lid: H: 1.985 mm) Chedpfx Aloz Dvdue Aoc The Barmix 180 litre twin shaft paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood the mixer is ideal for mixing many products that are free flowing and easy to move around. The Barmix 180 features a special paddle shaft arrangement with one slightly higher than the other to give a more effective and quality mix. The effective mixing action with high peripheral wing speed gives good protein extraction and uniformed distribution of spices, additives and liquids. Also the Barmix 180 Litre Mixer produces a gentle mixing action which reduces particulate destruction maintaining the product structure and its original quality.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,973 kg, empty load weight: 2,027 kg, loading space volume: 16.6 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,200 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible when purchasing multiple containers. Europe-wide delivery possible by arrangement. *Leasing/hire purchase possible!* 1 unit in stock, RAL 7043 Other models and sizes available from our Paderborn warehouse. You can view our stock levels on our website. Roll-off container according to DIN standard. Technical description: * Internal dimensions: 6000 x 2300 x 1200 mm * Usable volume: 16.6 cbm * Tare weight: 2027 kg * Floor 5 mm S 235 * Side walls 3 mm S 235 * Without internal supports * All sheets and profiles continuously welded * Double-wing door with safety lock * Container tested and approved according to DGUV Rule 114-010 Chedpfsz E Ncyex Al Asc * Floor-side wall connection 45° * Hook diameter 50 mm, S 355 * Hook height 1570 mm * Top frame square tube 100x100x5 mm * Net hooks * All moving parts greaseable * Steel drain rollers 159 x 6.3 length 300 mm * Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustration purposes only! The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1000 mm plate height: 1700 mm material thickness: 150 mm weight of the machine ca.: 2300 kg Chjdpfou N Dmlox Al Asc Cast aluminum plate, finished This plate can be used for assembly work on both sides. Numerous clamping holes (M8) evenly arranged on the plate. By means of lift/chassis (welded/screwed) the aluminum plate stands securely on the floor. The plate can be moved via two wheels each. *

Condition: used, Year of construction: 1995, Technical details: Chedpfxevc Axcs Al Ajc Table dimensions: 920 x 620 mm voltage: 220 / 50 V / Hz total power requirement: 0,77 kW weight of the machine ca.: 0,11 t dimensions L x W x H: ca.0,92 x 0,62 x 0,80 m Strapping Machine Semi-automatic machine for plastic strapping (approx. Ø 500 x 17mm) Strap holder located in the base cabinet table surface folded with 1,5mm chrome plate with stop LxWxH 345 x 80 x 20mm, adjustment approx. 32mm The adjustment of the tightening is done by display on linear scale. The packaging machine is mobile and easy to move = 4 castors, swiveling and 2 castors are braked. *

Condition: new, Year of construction: 2026, overall weight: 420 kg, total length: 31,000 mm, total width: 16,800 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This Profiline TP pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our Profiline TP is a semi-automatic stretch wrapper with up to 32 storable programs that guarantee absolutely consistent results. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. As part of the programs, you can also set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. Chjdpfez E Ik Njx Al Ajc results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 420 kg, this model is designed for loads of up to 1200 kg. Our Profiline TP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. If the wrapper wrapper is to be used at a different location in between, it can be easily moved by means of can be easily lifted and moved with a forklift truck via integrated cut-outs. This model is our recommendation if you are looking for a professional & robust pallet wrapper for larger quantities that takes up as little space as possible. Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Year of construction: 2026, condition: new, machine/vehicle number: KVK 3 Automatik_1, This automatic stretch wrapper with rotating turntable independently attaches the film to the pallet and cuts it after each wrapping cycle, unlike the semi-automatic KVK 3. Wrapping can conveniently be started by remote control—no need to get off the forklift or bend down to attach the film to the pallet. The machine is also equipped with a pre-stretch system for 250% elongation. This allows you to create up to 3.5 meters of wrapping film on the pallet from just 1 meter on the roll, greatly reducing your material consumption. Furthermore, the pre-stretch system applies minimal tension, so even lightweight goods remain stable and are not pulled from the turntable. At a weight of 700 kg, this model is very stable and engineered to handle loads of up to 2,000 kg. The KVK 3 Automatic features a 1,650 mm diameter turntable and, as standard, can wrap pallets up to 2,400 mm high. Adjustable turntable and film carriage speeds, along with a potentiometer-controlled power stretch unit, allow you to perfectly adapt the automated wrapping process to your product. Automatic pallet detection (via photocell) is standard, as are adjustable top and bottom wraps. Program options include “up only” wrapping, “up & down” (cross-wrapping), and “waterproof” wrapping. Manual operation is also possible if required. If you need to relocate the machine, it can easily be lifted and moved using cut-outs designed for forklift tines. Chedsz E Imqjpfx Al Aoc Options: In addition to a matching access ramp and a photocell for detecting dark goods or black film, the KVK 3 Automatic can also be optionally configured for wrapping heights up to 3,200 mm. This model is our clear recommendation if you are wrapping very lightweight goods or need to stretch-wrap more than approximately 30 pallets per day, with automatic film application and cutting. For further details, please see the technical data sheet attached as a PDF to this listing!

Condition: used, maximum load weight: 27,057 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2023, next inspection (TÜV): 09/2027, loading space length: 13,310 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, Year of construction: 2023, Equipment: ABS, Krone SDR 27 eL4 - MT ?Cool Liner? 3-axle cryogenic box semi-trailer, Multitemp for 2 temperature zones, 1 row of load securing rails recessed into the side walls as a perforated strip, certificate for load securing according to DIN EN 12642 Code XL, loading dimensions i.L. 13310 x 2490 x 2600 mm, 2 evaporators: at the front and rear portal, ISO partition with central locking, which can be moved longitudinally and folded up over the entire loading area, Thermo-King SLXi ?Spectrum? refrigeration unit for Multitemp (diesel and electric operation) with start/stop automatic, additional evaporator type S - 3 (cryogenic), System Two Zone, Thermo-King temperature recorder model Touchprint with printer, baseboard scuff protector approx. 300 mm high, aluminum floor pan, Krone-Gigant axles 3x 9000 kg air-suspended with lifting and lowering device, 1st and 3rd axles can be lifted incl. starting aid, ABS, disc brakes with EBS, braking system manufacturer WABCO Premium, KRONE Telematics KSC ProPlus Cool Dialog + Thermo-King temperature recorder incl. location monitoring, operating data, cooling temperature and cooling machine monitoring, etc., multi-function tail lights, full LED with 2 additional LED reversing lights and LED ambient lighting, tires 385/65 R 22.5, ALCOA aluminum rims, Delta rubber bumper profile at the rear, transversely on the rear frame, 2 sturdy rubber bumper buffers at the rear, in the center, 2 roll-compression buffers at the rear, externally (4 rollers per side), spare wheel holder in frame design at the right end of the frame, technically possible total weight 39,000 kg, unladen weight 8,943 kg, FRC valid until 02/2029, 1st owner, box body color similar to RAL 9010 pure white neutral, very good overall condition!, ORIGINAL mileage 258,400 (verifiable), German vehicle with German registration documents! Sale only to commercial businesses! All information without guarantee! Errors and prior sale excepted! Csdpfxoz E Tm Ne Al Aohc

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Cjdpoz E In Iofx Al Ajhc A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% stretching. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a potentiometer-controlled power stretch unit, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs for "up & down" (cross wrapping) and "rainproof" wrapping are available. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A suitable drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. This model is our clear recommendation if you wrap very light packages or wrap more than approx. 20 pallets a day and do not exceed a maximum pallet dimension of 800 x 1200 x 2250 mm. Chedpfx Alsz E Iwij Aec For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: excellent (used), Year of construction: 2018, lifting height: 1,620 mm, free lift: 400 mm, fuel type: electric, fork length: 1,150 mm, total height: 1,340 mm, color: other, GVW: 347 kg Lifting capacity: 1.000 kg Chodpfoz E Rbkex Al Ajc MANUAL STACKER! Movable forks! Battery 12V 80Ah 2025 GEL 2025, Built-in 220V charger, LOW WEIGHT, Removable forks, Adjustable legs, Moving manual, Electric lifting, Single fork wheels,