Used Multiple Group Workbench for sale (5,653)

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Cedpfjzxuz Djx Ab Djrg

Condition: like new (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, Base Machine - SH-5000P - Demonstration Machine Like New • Basic machine, 4-axis • Control: Siemens 840D sl • Table size: 500x500mm • Max. table load: 500kg • X/Y/Z travels: 730/730/830mm • X/Y/Z rapid traverse: 60/60/60 m/min • Milling spindle: • HSK63 • 30/50kW • 18,000 rpm • Tool magazine with 40 stations • Automatic pallet changer • Automatic loading door • Hydraulic unit • Oil separator • Oil mist extraction Crodpfx Aezluqlob Deg • Air conditioning unit for electrical cabinet • External measuring systems, linear axes • Media feed under pallets • Central lubrication • Door interlock • Coolant unit • Internal cooling with 70 bar high pressure • Coolant and compressed air gun • Chip conveyor • Documentation in German, digital

Condition: like new (used), Set of 3 Industrial Vacuum Cookers – Stainless Steel Crodpfxezwv Ipj Ab Deg Set of 3 industrial vacuum cookers made of stainless steel, designed for cooking, heating, and processing food products under controlled vacuum conditions. The set consists of three process vessels installed on a common frame with an elevated work platform, providing a robust solution for industrial batch production. Vacuum processing allows for cooking and concentration operations at reduced pressure, enabling operation at temperatures lower than those used in conventional atmospheric processes, depending on the product and recipe. MAIN FEATURES -Quantity: 3 vacuum cookers -Type: Industrial vacuum cooking/processing system -Application: Cooking, heating, and processing of food -Robust construction in stainless steel -3 independent process vessels -Configuration for batch production -Integrated piping and valve system -Vacuum processing -Bottom product discharge -Individual drive systems -Inspection/access hatches -Stainless steel work platform -Guardrails and access system -Designed for professional food processing environments -Integrable into complete production lines APPLICATION The system is designed to process food products in closed vessels under vacuum conditions. Working at reduced pressure allows the cooking and heat treatment conditions to be adapted to the characteristics of each product. The configuration of three vessels also provides high flexibility for managing different batches or production stages within the same facility. Depending on the product, it can be used for: Vacuum cooking Heating and heat treatment Concentration Mixing and homogenization Reduction of liquid products Sauce production Processing of fruits and vegetables Preparation of fillings and formulated products APPLICATIONS Especially suitable for food manufacturers, sauce and condiment producers, fruit and vegetable processors, prepared meal manufacturers, and industrial kitchens. Depending on its configuration, it can be used to produce sauces, jams, preserves, fruit preparations, vegetable products, fillings, concentrates, and prepared meals. The configuration of 3 industrial vacuum cookers offers a particularly interesting solution for facilities that require production flexibility and simultaneous processing of different batches. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2017, condition: excellent (used), Karl Schnell Processed Cheese Blending Line Capacity: 5,000 kg per hour. Complete Karl Schnell preparation/blending line, ideally suited for the preparation and blending of ingredients prior to the processed cheese melting process. Designed for efficient processing of cheese blocks, butter, powders, and other dry ingredients. The Karl Schnell grinder offers capacities of up to 5,000 kg/h, depending on the product. The line can feed a processed cheese UHT system and/or multiple cookers, making it highly suitable for continuous industrial production. Crsdpfx Aszxcgbob Dsg Two heavy-duty ribbon blenders provide efficient and homogeneous mixing of all ingredients. Large buffer tanks ensure controlled product flow. Equipped with heavy-duty Waukesha pumps, load cells, recipe-controlled operation, CIP capability, and an integrated pigging system. Designed for large-scale industrial use, offering high capacity, flexibility, and reliable ingredient preparation. Machinery: - Processed Cheese Blending Line 1. Trolley Elevator 2. Grinder 3. Conveyor 4. Blender 1 – 1,500 kg with buffer 5. Blender 2 – 1,000 kg with buffer 6. Pigging system

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) Codpfx Abezxc Ncj Dsrg - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: as good as new (ex-display), Year of construction: 2005, ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery SEMI AUTOMATIC DOUBLE MITRE SAW Technical Data Right head displacement by means hand wheel Reading of the cutting dimension on high precision metric scale with micrometric adjustment Sliding of the moving head by means of ricirculating ball bearings on rectified and tempered guides Radial sliding of the sawing group Full protection of the sawblades by means of safety hoods with automatic closing Pneumatic heads tilting at 90°/+ 45°/-45° Possibilty to mount sawblades Ø 500 - 530 - 550 mm 2,2 Kw (3 HP) 3 phase motors - 2800 r.p.m. Sawblade shaft Ø 30 mm Cutting lenghts 4000/5000/6000 mm Working pressure 7 bar Overall dimensions 524-624-724x139x155 cm Weight 1200 - 1350 - 1500 Kg Standard Equipment Horizontal pneumatic clamps Automatic lubrication by means of nebulizer Air filter Air gun Service spanners Optionals Reading of the cutting dimension on digital display Turning vertical clamps kit Pneumatic central support Manual central support Right head in feed roller conveyor Semi-automatic reduced cut modification c/w in feed roller conveyor Vee notch device for PVC profiles Micro-spray nebulising device Pneumatic support for long bars cover customer Startup type negotiated Description Notes Csdpfeb Rnv Sjx Ab Derg Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lattice side extension Equipment: - 6 lashing eyes - V-drawbar - Steel sheet body Net: €2,647.06 / Gross: €3,150.00 Article number: VF22202514340.11 Technical data: • Brand: Variant • Model: 2004 F2 • Vehicle type: Box trailer Cedpszy Dcgofx Ab Derg • Vehicle condition: New • Initial registration: Without initial registration • TÜV/HU (technical inspection): 2 years from initial registration • Internal dimensions (LxWxH): 255 x 145 x 90 cm • External dimensions (LxWxH): 395 x 192 x 145 cm • Loading height of the floor: 52 cm • Permissible total weight: 2,000 kg • Tare weight: 350 kg • Payload: 1,650 kg • Chassis: Low-loader (wheels beside the body) • Tires: 155/80R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Torsionally rigid longitudinal frame for safe driving characteristics • Zinc-coated steel sheet side walls • Option to insert at all 4 corners for tarpaulin frames, lattice side extensions, side wall extensions or front wall extensions • Rear side wall foldable • Made of multiple layers of glued screen printing plate, 15 mm, non-slip and waterproof • Maintenance-free rubber spring axles • Axle with continuous axle body and independent wheel suspension • 6 lashing eyes, recessed in the floor • Lever latch • Removable lattice side extension • Tarpaulin buttons for cargo net or flat tarpaulin • Overrun brake from Knott • Stable V-drawbar • Reverse automatic • KNOTT overrun device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Lighting recessed in the rear frame • Integrated rear fog light • 13-pole plug • Support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved -

Condition: good (used), Year of construction: 1998, Specifications: Maximum size 320 x 440 mm Minimum size 100 x 150 mm Max speed MX gathering machine 100 cycles/min Max stack height - Plus stacker 150 mm Consisting of: Gathering machine: Raccoglitrice MX - Hand feeding station - Number of gathering stations: 21 - Optical sheet control - Pump(s) - Distribution unit: MX Modulo - Colour monitor with touch screen - Distribution section into 3 sewing machines Sewing machine (1) Meccanotecnica Aster 2000 Year: 1998 - Automatic setting - Pre-loader sistema - 4 + 4 opening possibilities - Plus stacker - Including pump Sewing machine (2) Meccanotecnica Aster 2000 Year: 1998 - Automatic setting - Pre-loader sistema - 4 + 4 opening possibilities - Plus stacker - Including pump Sewing machine (3) Meccanotecnica Aster 2000 Year: 1998 - Automatic setting - Pre-loader sistema - 4 + 4 opening possibilities Csdpfx Ajzbu Uksb Derg - Plus stacker - Including pump

Condition: new, power: 180 kW (244.73 HP), fuel type: diesel, number of seats: 29, gearing type: mechanical, axle configuration: 4x4, emission class: euro3, color: white, suspension: steel, tire size: 365/80 R 20, wheelbase: 4,160 mm, Year of construction: 2025, Equipment: air conditioning, all wheel drive, power assisted steering, traction control, - Autoradio - CD - Heater LOOKING FOR A 4x4 PASSENGER BUS FOR DEMANDING OPERATIONS? When passenger transport needs to continue beyond paved roads, a conventional bus may not be enough. The Mercedes-Benz Atego 1725A 4x4 Passenger Bus combines a robust Mercedes-Benz commercial vehicle chassis with 29+1 passenger seats, 245 HP EURO 3 power, front and rear differential locks and off-road tyres. With independent passenger air conditioning, an insulated purpose-built bus body, rear-view camera and integrated roof rack, this Atego is designed for reliable passenger transport across remote sites, infrastructure projects and demanding regional routes. AT A GLANCE - Mercedes-Benz Atego 1725A 4x4 - 29 + 1 Passenger Seats - 245 HP / 180 kW - EURO 3 Diesel Engine - Front & Rear Differential Locks - Mercedes-Benz G 85-6 Manual Transmission - Mercedes-Benz VG550 Transfer Case - 365/80 R20 Off-Road Tyres - Independent Passenger Air Conditioning - Steel Body with Anti-Corrosion Treatment - Insulated Passenger Compartment - Aluminium Exterior Panelling - Rear-View Camera - Integrated Roof Rack Why This Configuration? Passenger transport becomes more challenging when the destination is located away from conventional road networks. The Mercedes-Benz Atego 1725A combines 4x4 capability with a dedicated 29+1-seat passenger body, creating a specialised solution for organisations that need to transport groups reliably across demanding operating environments. The Mercedes-Benz six-cylinder engine produces 245 HP / 180 kW, while the manual G 85-6 transmission and VG550 transfer case form the basis of the 4x4 drivetrain. Front and rear differential locks provide additional traction when conditions become difficult. Built for Demanding Routes Mining operations, infrastructure developments, construction sites and remote projects often require regular passenger transportation over gravel roads, unpaved routes and difficult access roads. That is where this Atego differs from a conventional passenger bus. Its 4x4 drivetrain, front and rear differential locks and 365/80 R20 off-road tyres provide the mobility required when paved-road transport is no longer enough. The result is a passenger vehicle designed to keep teams moving between locations where conventional buses may struggle. 29+1 Passenger Capacity The purpose-built body provides seating for 29 passengers plus one additional seat, using fixed-back seats throughout the passenger compartment. Codpfoy Rtyljx Ab Derg This provides practical capacity for transporting complete teams in a single vehicle while retaining the mobility of a two-axle 4x4 platform. An independent air-conditioning system with its own power pack supports passenger comfort, particularly during operation in warm climates. Purpose-Built Passenger Body The passenger body uses a steel structure with anti-corrosion treatment, aluminium exterior panelling and closed-cell polystyrene insulation. Marine plywood flooring provides a robust structural base, while a dedicated passenger entrance supports regular boarding and disembarking. Additional equipment includes a rear-view camera for easier manoeuvring and an integrated roof rack for luggage or additional equipment. Why Buy from Schaften Automotive? Since 1977,...

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Cedszq Tzaopfx Ab Dorg Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: SG47E1P001, working width: 3,200 mm, TECHNICAL DETAILS Cjdpfx Ajzyappob Djrg Printing/substrate width: max. 3.20 m Printing technology: HP Latex, water-based latex ink Printing inks: 6 colors (C, M, Y, K, Lc, Lm) MACHINE DETAILS Connected power: 11 kW Frequency: 50 / 60 Hz Voltage, 3-phase: 200–240 V / 380–415 V Current consumption, 3-phase: max. 48 A / 30 A Voltage, 1-phase: 240 V Current consumption, 1-phase: max. 63 A Energy consumption during operation: 11 kWh Energy consumption in standby mode: 0.2 Wh Operating altitude: max. 2,000 m EQUIPMENT Integrated curing/drying system Certifications: CE, CSA, EAC, KCC, FCC Part 15 Class A, VCCI-A

Condition: new, - New -Description:- For sawing, milling, surface planing, thickness planingand optional slot drilling- The work tables made of heavily ribbed gray cast ironand the underframe made of welded steel guaranteeTorsion resistance and vibration-free work- Unique in this performance class: smootherAluminum format slide, anodized, with ball contact system- Swiveling saw blade from 90 ° - 45 °- Table bracket with graduated scale and aluminum crosscut fencefor angled cuts on plates and large workpieces- Planing unit with TERSA quick change systemwith three planer knives- Helical-toothed steel feed roller for constantWorkpiece infeed when thicknessing- curved milling protection hood for profiling,with fine adjustment as standard- Milling unit with two speeds- The units are driven by three independent motors- Made in Italy qualityTechnical specifications:Dimensions and weightsWeight (net) approx. 245 kgDressingPlaning table width 300 mmPlaning table length 1200 mmAngle of inclination saw / planer fence 90/45 °Chip removal ssing 3 mmConnection suctionExtraction nozzle diameter 4 x 120 mmSuction nozzle diameter of the saw blade guard 60 mmInstallation informationRequired space length 2460 mmSpace requirement width / depth 2155 mmExplanation of space requirements: Take the dimensions into accountmaximum travels or useful cknessThickness table length 450 mmThickness table width 300 mmWorking height thickness min. 3 mmWorking height thickness max. 200 mmChip removal max. Thickness 3 mmElectrical dataConnection voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle of drive motor 40%Drive motor power 3 x 1.8 kWSliding carriage and tableFormat sliding carriage length 1140 mmFormat sliding carriage width 201 mmFormat sliding carriage height 70 mmTable length 1024 mmTable width 224 mmTable height 900 mmMilling spindleSpindle inclination 0 °Spindle mandrel diameter 30 mmUsable length of the spindle 75 mmSpindle speed (s) 5000 - 7500 min? ¹Milling tool diameter l diameter max. 160 mmTool diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmPlaner knife shaftPlaner shaft type TERSAPlane shaft diameter 62 mmNumber of planing knives 3 pcsCircular saw unitTrimming length 1200 mmCutting width with rip fence 540 mmMax. Cutting width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45 °Max. Cutting height at 90 ° 67 mmMax. Cutting height at 45 ° 40 mmMax. Saw blade projection 90 ° 75 mmMax. Saw blade projection 45 ° 60 mmFeedFeed speed 6 m / minScope of delivery:- Tersa quick-change planer knife shaft- anodized aluminum sliding table- Multifunctional stop for parallel cuts and surface planing- Table extension arm with crosscut fence and stop jaw- Eccentric clamping armItem no .: 5500030 Codpfxjvwf Ens Ab Djrg

Condition: new, mileage: 22 km, fuel type: gasoline, axle configuration: 4x2, wheelbase: 3,250 mm, color: white, gearing type: mechanical, emission class: euro6, loading space length: 2,700 mm, loading space width: 1,800 mm, loading space height: 1,600 mm, Equipment: all wheel drive, cooling unit, PIAGGIO NP6 LPG, DOUBLE WHEEL INSULATED VAN WITH THERMO V 200 MAX REFRIGERATION UNIT (-20) FOR ROAD/GRID POWER NEW, AVAILABLE FOR IMMEDIATE DELIVERY READY FOR REGISTRATION EXTERNAL DIMENSIONS: 2700X1800X1600 INTERNAL DIMENSIONS: 2540X1640X H 1440 START VERSION AT OTHER LOCATIONS OF OUR GROUP, WE ARE OFFICIAL MERCEDES-BENZ DEALERS TRUCK, NAPLES BRANCH (NA) DOMENICO ESPOSITO, EBOLI BRANCH (SA) OFFICIAL FORD TRUCK DEALER, DOMENICO TRUCK SRL BRANCHES: MARCIANISE (CE), NAPLES (NA), EBOLI (SA) AND OFFICIAL PIAGGIO COMMERCIAL DEALER DOMENICO ESPOSITO WE OFFER A WIDE SELECTION OF USED COMMERCIAL/INDUSTRIAL VEHICLES FROM MULTIPLE BRANDS (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA-MAN-NISSAN-ISUZU-FI XED PLATFORM-CRANE-DUMP TRUCK-CURTAIN-SIDER-BOX-TAIL LIFT-REFRIGERATED CELL-INSULATED WITH REFRIGERATION UNIT-VAN) - POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING ON SITE. TEL. 0- Codpohrhvrofx Ab Djrg BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 AM / 7:00 PM SATURDAY 8:30 AM / 2:00 PM

Condition: good (used), Bosch Turbo Scara SR6 Swivel-Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideal for assembly work and fast pick-and-place movements. The turboscara SR6 and SR8 are swivel-arm robots (SCARA robots) with four axes and offer the following advantages: • Minimal cycle time with maximum precision • Large workspace and various strokes • Defined mechanical interfaces • PC control with diverse communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is quick to learn and enables the creation of clear and understandable programs; New with BAPSplus: graphical user interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connection for time-saving installation Crodeiuzqtopfx Ab Dsg Technical specifications: Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (axis 4) 500 kgcm² Maximum moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (Axis 4) continuous/maximum 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Including controller Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see image Since this item is available multiple times and the robots have different Work tools these are only sample images and may vary. Item condition: Used (Subject to changes and errors in the technical data, information is subject to change!) In addition to approximately 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. A wealth of workshop equipment, workbenches, workshop trolleys, tools, forklifts, and shelving are available. A total of 24,000 m² of production space will be dismantled and sold. Please also note our other offers. The amount is due within 7 business days of purchase. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Aluminum plate aluminum 252 x 128 x 6cm workbench worktop Heavy aluminum plate -37- Aluminum 252 x 128 x 6cm Codjiu Uzuepfx Ab Derg Workbench worktop. More items - new and used - you will find in our store! International shipping costs on request!

Condition: like new (used), Stainless, 60l capacity mixer, rotating bowl with tilt discharge, mixing paddle forward and reverse, mobile, 1Ph Csdpfsivufwex Ab Derg

Condition: used, 70 linear meter painting chain, with clutch system for a load of many products in confined space (see video) Credpfjivur Asx Ab Dog 70-meter painting line with friction system for loading multiple products in a small space (see video)

Condition: used, Wigo Double squaring machine with 3 groups per side, complete with inverters. - right and left circular saw Crsdpfoummldsx Ab Dsg - right and left cutter - right and left cutter Max working width: mm. 1500 Engine power: Circular saws: 3KW X2 Toupie Milling Machines: 5.5kw x2 Rotary Sanders: 5.5kW x2 Feed motor: 4KW Shoulder width adjustment motor: 3KW

Condition: good (used), Year of construction: 2005, functionality: limited functionality, machine/vehicle number: M9405, color: green, - internal diameter of cyclone 750mm - sieve size 3000x1600 mm 1 level - indicative sand production 65 cubic meters / h - turbid production 10000 liters / min - Pump motor power 75Kw Crjdpeu Avvxofx Ab Deg - Max. sieve motor power 6+6 Kw - use and maintenance manual

Year of construction: 2022, condition: new, I sell 150 sets of new saw blades suitable for multiple rip saws multirip cutting machines. Dimension saw blade PILANA 290 x 2,5 x hole 60 teeth 30+4 FZ and PILANA 250 x 2,3 x hole 60 teeth 30+4 FZ Price totally 2000 Euro. Available immediately. Crsdsw Am Imjpfx Ab Dog

Condition: used, SECOND-HAND MULTIPLATENS BENDING PRESS - 7 platens - Platen dim. mm. 800x800 - Opening mm. 1600/1800 Credpfowry H Uox Ab Dog - Cylinder diam. 350 mm.

Condition: used, Year of construction: 2006, Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  - Capacity: 30,000 bottles/h (0.33 L, 6-packs) - Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm - Formation of packs: 2×3 (six-pack wraparound) Codpfx Abew T Sthj Djrg - Operating hours: 1,677 - Construction: Full stainless steel - Glue type: Hotmelt Scope of Delivery  - Wraparound packer | Krones | Solidpac | 2006 - Infeed conveyors for bottle supply and dividing system  

Condition: used, functionality: limited functionality, working width: 220 mm, working height: 120 mm, overall weight: 2,300 kg, power of feed motor: 1,200 W, spindle speed (max.): 6,000 rpm, table length: 2,000 mm, feed roller diameter: 120 mm, Equipment: motor brake, COMPACT 22 - AUTOMATIC PROFILING MULTIPLANER Max working width 220 mm Min working width 25 mm Max working height 120 mm Min working height 6 mm Min workpiece length 480 mm Feed rate 6 - 12 m/min spindle speed 6000 r/min spindle diameter 40 mm length of vertical spindle 135 mm length of horizontal spindle 230 mm axial adjustment of vertical spindle from 0 to 25 axial adjustment of horizontal spindle from 0 to 25 Min/Max tool diameter for vertical profile tools 100 – 180 mm Min/Max tool diameter for horizontal profile tools 100 – 180 mm Min/Max tool diameter on dressing shaft 120 – 140 mm Min/Max joint bevel cutter diameter 145 – 165 mm motor power of dressing shaft 4 kW motor power of vertical spindle 5,5 kW motor power of thickness shaft 4 kW motor power of feed 1- 1,2 kW motor power of height adjustment 0,37 kW feed roller diameter 120 mm feed table length 2000 mm adjustment range of feeding table and joint ruler 10 mm diameter of suction hood 120 mm Credpetph Nmofx Ab Dog net weight 2300 kg dimensions with universal spindle 3980 x 1520 x 1850 mm

Condition: used, Year of construction: 2004, machine/vehicle number: FA57, Used Shrink Wrapper MIMI – Overview This used MIMI shrink wrapper is engineered for grouping and overwrapping PET bottles into stable retail-ready bundles on a modern bottling line. Designed for industrial packaging and beverage production, it delivers dependable second hand performance with efficient film-only bundling. The machine is configured for straight infeed handling of round bottles and supports multiple pack patterns without cardboard backing, making it a versatile choice for high-throughput packaging operations. Built for continuous-duty operation, this shrink wrapper is well-suited to integrate into existing bottling equipment and packaging machinery. It is a strong fit for beverage production environments where consistent pack quality, format flexibility, and reliable throughput are essential. With compatibility for common PET bottle sizes and standard pack matrices (3×2, 2×4, 3×4), it helps reduce material consumption by eliminating trays or pads while maintaining pack stability after heat shrinking. Technical Specifications & Performance Data Cjdpsxurm Aefx Ab Derg Manufacturer: MIMI Machine type: Shrink Wrapper Year of manufacture: 2004 Capacity: up to 6,000 bottles/hour or 100 packs/hour (depending on pack configuration) Bottle sizes supported: 0.33L, 0.5L, 1.0L, 1.5L Container types: PET bottles Pack configurations: 3×2, 2×4, 3×4 (trayless, no cardboard backing) Infeed orientation: Straight infeed for round bottles Advanced Automation & Control Systems The machine is designed for inline, conveyor-fed operation typical of automatic shrink wrapping systems. Standard industrial protections and operator interfaces support routine adjustments and format changes. Exact PLC/HMI, electrical ratings, and power data are not specified in the available documentation. Production Line Integration Capabilities This shrink wrapper integrates smoothly with upstream and downstream bottling equipment, including conveyors from fillers, labelers, and pack conveyors to palletizing. The straight infeed accommodates round PET bottles and allows quick transitions between pack matrices. Its trayless film bundling reduces material handling and simplifies logistics while maintaining pack integrity after the shrink tunnel. Machine Condition & Maintenance History The machine was removed from service in 2019 and is currently not in active production. It is offered as a second hand unit suitable for recommissioning. Specific maintenance logs and operating hours are not provided in the available documentation. Operational Performance & Versatility Optimized for PET bottles, this shrink wrapper covers the most common beverage bottle sizes from 0.33L through 1.5L. Its ability to produce 3×2, 2×4, and 3×4 bundles without cardboard backing supports cost-efficient industrial packaging while preserving good pack stability following shrinking. The straight infeed for round bottles enhances handling reliability and reduces changeover complexity. Installation Requirements & Site Preparation As with most shrink wrappers, installation typically requires a stable, level foundation, adequate f...

Condition: new, length 1700 mm Cedextfy Tspfx Ab Dsrg width 600 mm height over floor 860 mm table load capacity 400 Kg dimensions 1700 x 600 x 400 m weight 70 kg Workbench with 6 drawers and solid wood worktop Door compartment dimensions (W x D x H) 940 x 400 x 440 mm Small drawer dimensions (W x D x H) 460 x 400 x 120 mm Height adjustment: max. 40 mm