Used Pfeiffer Center Lathe for sale (16,643)

Condition: reconditioned (used), Product information "Voest Alpine DA 160" Voest lead and feed spindle lathe Model DA 160 Condition: Refurbished Technical data Center height: 165 mm Distance between centers: 650 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 190 mm Bed width: 210 mm Lead spindle diameter: 25 mm Chuck diameter: 160 mm Tailstock spindle: MK 3 Spindle speed (16): 30 - 2500 rpm Motor power: 2 / 2.4 kW Ppsdpfsy Ndqrsx Am Tjw Quill stroke: 100 mm Dimensions (L x W x H): 1500 mm x 900 mm x 1650 mm Equipment: - Geometry report - 3-axis digital display, Sino brand - NEW - 3-jaw chuck - Emergency stop button - Quick-change tool holder system Multifix, number of holders 6 - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with taper shank - Follower point - Lead and feed spindle cover NEW - Chuck guard, limit switch secured - Operating tool - Operating manual - Machine feet

Condition: reconditioned (used), Product information "Guide and lead screw lathe Kern D 20 A" Guide and lead screw lathe Kern Type / Model D 20 A Condition: Reconditioned Technical data: Distance between centers: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (12): 31.5 - 1400 rpm Motor power: 4 kW Quill stroke: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: Ppedjy H Iqwjpfx Am Tjw - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Rotating center

Condition: reconditioned (used), Lead and feed spindle lathe Kern Type / Model: D 20 A Condition: Overhauled Technical data Center height: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (24): 31.5 - 1400 1/min Motor power: 4 kW Quill travel: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix Ppjdpfey H Ecksx Am Tew - Machine light - Coolant system - Follower center

Condition: used, functionality: fully functional, Leadscrew and feed shaft lathe Manufacturer: Heidenreich & Harbeck, Type VDF V3 Pedpfx Aoy Iyzqsm Topw Technical Data Brand: Heidenreich & Harbeck Type: VDF V3 Year of manufacture: unknown Control: conventional Centre distance: 1000 mm Swing diameter over bed: 520 mm Spindle bore: 63 mm Dimensions: L 3.40 x W 1.10 x H 1.40 m Machine weight: approx. 3.5 t Equipment - 4-jaw chuck Röhm, diameter 250 mm All information provided without guarantee. A power-on demonstration is possible at any time in our showroom.

Condition: used, functionality: fully functional, spindle bore: 65 mm, turning diameter over bed slide: 520 mm, Lead and feed screw lathe Manufacturer: Heidenreich & Harbeck, Model: VDF Technical data Brand: Heidenreich & Harbeck Model: VDF Year of manufacture: unknown Control: conventional Centre distance: 1,500 mm Swing over bed: 520 mm Spindle bore: 65 mm Dimensions: L 3.60 x W 1.20 x H 1.50 m Machine weight: approx. 4 t Pjdpey A H Akefx Am Tjpw Equipment - 2-axis digital readout - 1,500 mm scale not included All data without guarantee. A powered demonstration can be arranged at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz Podstv Iibepfx Am Tjpw power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Condition: used, Year of construction: 1972, Dreh-Øüber Bett 400 mm Dreh-Øüber Support 220 mm turning length 1000 mm spindle turning speed range 12,5 - 2000 U/min spindle taper Bajonett 55022 spindle bore 47 mm feeds - longitudinal 0,07 - 4,16 mm/U feeds - cross 0.035 - 2,08 mm/U thread - mm pitch mm thread - inch 2 - 24 Gang/ inch. Ppjdpfevzhhysx Am Tjw rapid travel - longitudinal/face 3,4 / 1,7 m/min spindle drive 11 kW power capacity 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992

Condition: excellent (used), Emco Super 11 CD BIG BORE Year of manufacture: 2004 (CE) Distance between centers: 650 mm Center height: 140 mm Swinging diameter over bed: 280 mm Swinging diameter over cross slide: 170 mm Spindle bore: 35 mm Spindle speeds: 55, 110, 200, 300, 410, 600, 1100, 2200 rpm Longitudinal feeds: 14 (from 0.03 – 0.3 mm/rev) Cross feeds: 14 (from 0.015 – 0.15 mm/rev) Tailstock travel: 80 mm Connection: 16 A / 380 V Dimensions: 1,350 x 800 x 1,240 mm (W x D x H) Multifix A including 5 holders Chuck jaws Various chuck keys Operating manual Electrically locked chuck guard 3-jaw chuck, Ø140 Backlash of cross slide spindle: 0.1 mm Backlash of top slide: 0.15 mm Pedezgrkxepfx Am Topw The machine is in very good condition.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock Ppedpfx Ajyuyrujm Tow - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: good (used), functionality: fully functional, spindle bore: 37 mm, turning diameter: 250 mm, turning diameter over bed slide: 250 mm, center height: 125 mm, turning length: 1,000 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,200 mm, spindle speed (max.): 2,000 rpm, rotational speed (max.): 2,000 rpm, Manufacturer: Harrison Model: M-250 Condition: Used Maximum turning diameter over bed: 250 mm Maximum turning length between centers: 1000 mm Ppjdpfx Ajx Rrpfsm Tew Spindle bore: 37 mm Maximum spindle speed: 2000 rpm Spindle mount: Camlock Toolholder type: Drehblitz Machine dimensions (L x W x H): 150x80x120 Connection voltage: 400 V Cooling system: Yes Digital readout: Yes, 2 axes

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Psdpfx Amsxp Hudo Topw

Condition: new, Year of construction: 2025, spindle bore: 40 mm, turning diameter over bed slide: 340 mm, turning length: 760 mm, ERL-V Series Variable Speed Lathe Model: ERL-1330 V Turning Capacity: Ø 340 x 760 mm Spindle Bore: Ø 40 mm Variable Speed Drive Sino Digital Readout Fixed Steady Rest Travelling Steady Rest Multifix Quick-Change Tool Post Coolant System LED Work Light Spindle Brake Chuck Diameter: Ø 178 mm Technical Specifications: - Height of centers: 171 mm - Swing over bed: Ø 342 mm - Swing in gap: Ø 512 mm - Swing over cross slide: Ø 205 mm - Distance between centers: 760 mm - Bed width: 230 mm - Gap width in front of faceplate: 150 mm Headstock and Main Spindle - Spindle nose / internal taper: D1-4, MT No.5 - Spindle centre sleeve: MT No.5 x MT No.3 - Spindle bore: Ø 40 mm - Spindle speeds: Low 100–500 RPM / High 500–3000 RPM, infinitely variable Carriage - Bed length / carriage width: 400 mm / 384 mm - Cross slide travel: 180 mm - Top slide travel: 95 mm Threads and Feeds - Whitworth threads: 45 types / 2–72 TPI - Metric threads: 39 types / 0.2–14 mm - D.P. threads: 21 types / 8–44 - M.P. threads: 18 types / 0.3–3.5 M.P. - Longitudinal feeds: 0.05–1.7 mm/rev - Cross feeds: 0.025–0.85 mm/rev Tailstock - Quill diameter: Ø 50 mm - Quill travel: 112 mm - Centre taper: MT No.3 Motors - Main spindle: AC 2.2 kW (3 HP) - Inverter/Coolant pump: 1/8 HP Weight (Net / Gross): Approx. 850 / 950 kg Shipping Dimensions: 2000 x 965 x 1900 mm (L x W x H) Crated Dimensions: 2270 x 1000 x 1120 mm (L x W x H) Podpsxal Hmsfx Am Tepw Presented in a format suitable for Machinery classifieds such as Machineseeker and TruckScout24.

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm Ppedpjzd Tycsfx Am Tow >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: excellent (used), For sale: ZMM C8C lathe as shown in the photos, marketed under the Huvema brand for the Dutch market. The machine comes from a school workshop where it has been in operation since its production. The condition of the machine is very good. On-site loading of the machine is provided. Turning trials were performed using a VCGT insert with a radius of 0.2. 160 mm Bison chuck with split jaws Turning length: 750 mm Swing over bed: 320 mm Ppedpfx Amjy Rq Utj Tow Swing over cross slide: 190 mm Tailstock taper: MK3 Spindle speeds: 85–2000 RPM 12 spindle speed steps

Condition: good (used), turning diameter over bed 380 mm turning diameter over slide rest 250 mm turning length 600 mm turning speeds 90 - 1600 U/min centre height 200 mm total power requirement 4,2 kW Ppjdpfx Amjzd Hf So Tow weight of the machine ca. 1,3 t dimensions of the machine ca. 2,2 x 0,9 x 1,6 m

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, With 3-axis digital display Ppsdpfjyybxnjx Am Tew Year of manufacture: 2015 Spindle bore: 54 mm Distance between centers: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm, stepless speed control with display on screen Including the following accessories: Multifix tool holder Coolant system Three-jaw chuck Ø 200 mm Four-jaw chuck Ø 250 mm Collet chuck complete with collets up to Ø 32 mm Chuck guard Chip guard with lighting Fixed steady rest Ø approx. 150 mm Travelling steady rest Ø approx. 100 mm 4 pcs. height-adjustable machine feet 1 pc. live center Operating manual

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake Halogen lamp Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module 20 diametral pitch thread pitches from 8 to 56 D.P. Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Podpezp Nknefx Am Tepw Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm

Condition: used, Year of construction: 1989, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 54 mm, turning diameter: 390 mm, turning diameter over bed slide: 390 mm, center height: 190 mm, turning length: 750 mm, quill stroke: 155 mm, total length: 1,950 mm, total width: 970 mm, total height: 1,250 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, metric thread steps: 39, type of input current: three-phase, overall weight: 1,170 kg, quill mount: MK 4, spindle mount: MK 4, Lead and feed screw lathe with digital display Colchester Triumpf 2000 Digital display for 3 axes, Mitutoyo Center height: 190 mm Distance between centers: 750 mm Swinging diameter over bed: 390 mm Swinging diameter over carriage: 240 mm 16 spindle speeds from 25-2000 rpm Year of manufacture: 1989 Spindle bore: 54 mm Spindle mount D1 6” Camlock Tailstock taper MK 4 Tailstock quill travel 155 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake 15 longitudinal feeds from 0.04 to 1.0 mm/revolution 15 cross feeds from 0.02 to 0.05 mm/revolution 39 metric thread pitches from 0.2 to 14 mm 45 Whitworth thread pitches from 2 to 72 threads/inch Ppjdpfx Aszp H Rxjm Tsw 18 module thread pitches from 0.3 to 3.5 module 21 diametral pitch thread pitches from 8 to 44 D.P. Operating manual and parts list in German, English, French, Swedish, Finnish Weight: 1170 kg L x W x H: 1950 x 970 x 1250 mm Motor: 5.5 kW Including accessories: 4-jaw chuck, Ø 250, brand Bison 27 sets of soft jaws for 4-jaw chuck 1 quick-change tool holder Multifix with 5 tool holders including facing tool, parting tool and internal turning tool Hollow spindle stop 1 drill chuck, Ø 1 to 13 mm 1 center punch Turret bed stop Rear tool holder

Condition: ready for operation (used), Year of construction: 1995, turning diameter over cross slide: 560 mm, spindle bore: 100 mm, turning diameter: 560 mm, turning length: 3,000 mm, Padovani Labor 275 E Electronic Teachin lathe Turning diameter above bed: 560 mm Passage: 100 mm Turning length: 3000 mm Transport dimensions (LxWxH): 490x140x160 cm Weight: kg Blue year: 1995 Options: Tools included Movie available! Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Padovani Labor 275 E Electronic Teachin lathe Turning diameter above bed: 560 mm Tube diameter: 100 mm Turning length: 3000 mm Transport dimensions (LxWxH): 490x140x160 cm Weight: 0 kg Year of manufacturing: 1995 Options: Includes tools Movie available! Location: Hamont-Achel, Belgium Call or email for more information: Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. Ppjdjrfw Nwspfx Am Tew Padovani Labor 275 E Electronic Teachin Drehmaschine Drehdurchmesser over the bed: 560 mm Carriage door diameter: 100 mm Drehlänge: 3000 mm Transport abmessungen (LxWxH) 490x140x160 cm Weight: 0 kg Construction year 1995 Optionen: Inklusive Werkzeug Film verfügbar! Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: excellent (used), Year of construction: 1995, Digital display Swing diameter 120 mm Turning length 700 mm Ppjdpozfx S Tefx Am Tew Spindle speed 2000 rpm Tailstock

Condition: good (used), functionality: fully functional, Machine Name - Colchester Pjdpfxjuk H Rbs Am Tjpw Machine Model - Triumph 2000 Description - 3 Jaw Chuck Between centers : 50 inch / 1270mm Spindle speed 2000 RPM Swing over bed 15inch /380mm Spindle bore: 2 125 inch / 54 mm Diameter Quick change tool post 2 axis Accurite DRO Gap bed Tailstock Coolant pump and tray

Condition: used, functionality: fully functional, Lathe Type: Ucimu brf150 Podewurt Sspfx Am Topw 380V Distance between centers: 800 mm Spindle bore: 35 mm Tool height: 25 mm Swing diameter over cross slide: 180 mm Swing diameter over bed: 320 mm 4-jaw chuck MC2 in tailstock

Condition: good (used), Diameter over bed: 500 mm Diameter over carriage: 270 mm Diameter of swing over cross slide: 700 mm Distance between centers: 1500 mm Diameter of tailstock spindle housing: 70 mm Travel of tailstock spindle: 180 mm Travel of cross slide: 300 mm Maximum workpiece weight: 300 kg Total power: 6.6 kVA Machine weight: 1760 kg Ppedpezf Nd Hsfx Am Tew

Condition: good (used), Year of construction: 1991, functionality: fully functional, Weiler Praktikant 160 B, Podpfxszg Hvve Am Tspw Year of manufacture: 1991, 3-axis digital display, Maximum turning diameter: 160 mm, Distance between centers: 650 mm, Spindle speed up to 2,500 rpm, Tailstock, Collet set, Chuck, 2 tool holders.

Condition: used, Meuser Guide and Lead Screw Lathe Type/Model: Meuser M1L Condition: Used Year of Manufacture: 1980s Technical Data Center Height: 210 mm Distance Between Centers: 1000 mm Ppedpfx Aozgia Dsm Tjw Spindle Bore: 55 mm Bed Width: 340 mm Spindle Speed: 40 - 1800 (12) Motor Power: 7.5 hp Tailstock Arbor: MK 3 Tailstock Quill Travel: 120 mm Dimensions (L x W x H): approx. 1750 mm x 1200 x 1750 mm Equipment / Accessories: - 3-axis digital display, Heidenhain - 3-jaw chuck - Collet chuck, Forkardt - Quick-change tool holder, Multifix, number of positions 1 - Bed stop - Follower center - Chuck guard - Taper turning attachment - Machine feet