Used Pmh W-250+ for sale (36,182)

Condition: new, pressure: 250stroke: 450table length: 1.500performance of pump: 35motor power: 15weight approx.: 2.500Workshop Press: Motor and manual control Nsdpfx Aeit E N Uogpecu Laterally movable cylinder Hema or Caproni pump Pressure gauge Operating manual included CE-certified Made in Turkey Frame opening (clear width): 1500 × 450 mm

Condition: new, *AVAILABLE IMMEDIATELY* Including hand pump / all-steel floor Technical Data: • Brand: Martz • Model: KIPPER 250 S • Vehicle type: Rear tipper trailer • Condition: New vehicle • Initial registration: Not yet registered • TÜV inspection: 3 years from initial registration • Internal dimensions (LxWxH): 253 x 152 x 30 cm • External dimensions (LxWxH): 371 x 164 x 111 cm • Permissible total weight: 750 kg • Unladen weight: 323 kg • Payload: 427 kg • Chassis: High-loader (wheels located under the body) • Tyres: 165/70R13 • Axle: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Double-walled, anodised aluminium side panels • All side panels can be folded down and removed • Removable steel corner posts • Insert sockets at all four corners for fitting tarpaulin frames, mesh sides, side wall extensions, or headboard extension • Plastic tie-down buttons mounted to the side panels for fastening nets or flat tarpaulins • Sturdy eccentric locks • 44° tipping angle • 100 km/h manufacturer approval • Robust full steel floor • Reinforced V-drawbar • Strong welded steel frame • Frame fully hot-dip galvanised by immersion bath • Multiple cross-beams for increased point load capacity • Double-acting hand pump for manual tipping • 6 certified lashing rings set into the side rails (600 DaN/kg) • Unbraked rubber-sprung KNOTT axle • 13-pin plug • Reversing lights • Large, high-visibility safety lighting • Integrated rear fog light • Rear frame lighting recessed for protection • Central jockey wheel Optional extras – On request: • Mesh sides • Side wall extensions • Cover net • Flat tarpaulin • Anti-theft device • Spare wheel • Tool box • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Registration documents can be sent in advance or export plates (Germany) can be provided - Export plates including customs registration available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available from stock! Nodpfx Aox Tbk Djgpocu We have been authorised dealers and service partners for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, omissions and prior sale -

Condition: reconditioned (used), modernized machine with a new StoreControl L control system Control system expansion optionally available currently 5 (of the original 6) identical machines available External dimensions: Overall height 5,900 mm Overall width 1,580 mm Overall depth 2,680 mm 30 supports, each with a load capacity of 250 kg in the clear internal dimensions: W = 1,250 mm D = 825 mm H from 0 to 750 mm Ncsdpfx Ageg Dckuepou Total load capacity up to 20,000 kg Start of opening at 860 mm above floor level, then 1000 mm high Color: gray / dark gray, supports hot-dip galvanized Surface cleaned, signs of use and minor deformations possible Performance data: Vertical drive 1 x x.0 kW / 400 Volt Horizontal drive 1 x 0.xx kW / 400 Volt additional extras: Lift door can be operated manually Subject to errors, technical changes, and minor deviations from the photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Currently, 13 (formerly 17) identical machines are still available. Mechanically refurbished machine with new LTG control system StoreControl L. External dimensions: - Height: 8,450 mm (modification possible at extra cost) - Width: 2,805 mm - Depth: 2,810 mm 50 carriers, each with a load capacity of 250 kg Clear usable dimensions: - Width: 2,450 mm - Depth: 825 mm Nodpfx Aon D A I Tsgpecu - Height: from 55 to 750 mm Total load capacity per machine up to 2 x 15,000 kg Operation opening begins at 890 mm above FFL (finished floor level), with a height of 875 mm Colour: cream white / blue, carriers sendzimir galvanized, surfaces cleaned, traces of use possible Performance data: - Vertical drive: 1 x 5 kW / 400 Volt - Horizontal drive: 1 x 0.55 kW / 400 Volt Optional transport trolleys available Subject to errors, technical modifications, and variations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: new, Year of construction: 2026, High-performance deburring machine for simultaneous internal and external deburring of profiles and pipes in a single operation (approx. 3 seconds). Njdpfx Agsnvfl Aepscu Powerful industrial gear three-phase motor with frequency control, allowing stepless speed adjustment: 600 – 2,700 rpm. Designed for deburring pipes and profiles with material dimensions (horizontal/vertical) up to 120 mm. Easily adjustable working table height (adjustable and lockable) to match the required material size. Adjustable, lockable feed (carriage) of the deburring brushes to the working table via hand wheel with locking function. Drawer for dust residue collection. Sheet steel housing prepared for connection to an external extraction system. Folding covers for easy brush changeover. Machine body color: RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm crimped steel wire. Power cable with CEE plug. Operating tools included. 12 months warranty for single-shift operation. Working height: 1050 mm Speed: 600 – 2700 rpm Weight: 410 kg Machine dimensions: 680 x 1200 x 1380 mm Power: 3 kW Electrical connection (V/Hz): 400/50 Brush diameter: 250 mm Standard brush width: 60 mm. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL FLOTT PRODUCT RANGE! REQUEST AN OFFER TODAY!

Condition: new, Year of construction: 2026, Table design: -High performance -Belt sanding unit with adjustable height from 0-90° -Maximum usable surface area for surface sanding -Belt adjustment with fine adjustment Combined belt/disc sanding machine -Longitudinal guide for material guidance -Perfectly balanced and with low vibration -Connection on both sides for dust extraction, Ø 50 mm -Motor protection switch with undervoltage release -Fixed stop -1 sanding belt standard (brown), grit 80 -1 sanding disc 250 x 40 x 51 mm, grit 80 -Spark arrester -Connection cable with CEE plug Additional cost for special equipment/option: - Machine stand, emergency stop button, brake and dust extraction / €2,260 (item 330.370) - Machine stand, emergency stop button and brake / €1,030 (item 330.365) - Machine stand with water immersion container / €360 Ncsdpfxehhiaas Agpou DELIVERY: FREE TO YOUR DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, High-performance band saw machine with hydraulic saw frame lowering (control valve) for miter cuts from 0° to 60° right / 45° left Torsion-resistant, robust cast saw frame Powered chip removal brush Cut feed via frame weight Miter angle adjustment and clamping manual Quick-action, movable vise Electric coolant pump Precision-ground, carbide saw band guides (adjustable) Ncedpfxexlhmyj Agpeu Large-diameter round support table, rotates with the miter, miter scale visible from the operator side Easily removable chip tray Material stop 500 mm with scale Includes combination-tooth saw band 4/6. Technical Data Motor: three-phase 400 V, 1.5 kW Saw band dimensions: 2720 x 27 x 0.9 mm Flywheel diameter: 325 mm Cutting speed: 20-120 m/min Vise clamping range: 320 mm Working height: 760 mm Weight: 390 kg Machine dimensions (W x D x H): 1480 x 1700 x 2000 mm

Condition: new, Year of construction: 2026, Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the clamping device Automatic shut-off after cutting, return of the saw arm to the starting position Torsionally rigid saw frame made of cast steel (with multiple ribs) Hydraulic short-stroke cylinder for the clamping device Precisely ground carbide saw blade guides, adjustable Electric coolant pump Belt tension manually adjustable with display, incl. electric saw blade and cutting pressure monitoring Hydraulic vise (opening and closing) Rotating chip removal brush Oversized, solid round support table, rotating with miter cuts with a predefined cutting channel; miter setting manually adjustable, reading via scale Material stop 500 mm with scale Incl. saw blade with combi-tooth pattern 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 Motor - three-phase 400 V, frequency-controlled 1.5 kW Saw blade dimensions 2910 x 27 x 0.9 mm Flywheel diameter 325 mm Cutting speed 20-120 m/min Vise clamping width 320 mm Working height 760 mm Sawing range: at 0° = Round D 250 mm, Square 240 x 240 mm, Rectangle 320 x 190 mm Machine dimensions (W x D x H) 1480 x 1700 x 2000 mm Ncjdecl Tc Ajpfx Agpju Weight 420 kg Further accessories available upon request. DELIVERY: FREE TO YOUR DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 2013, condition: like new (used), Brand: BDPLAST Ncodpehwwqfofx Agpeu 2013 Year of construction. Suitable for extruders with 90 to 150 screw diameter. Universal use as good as new only approx. 500 operating hours. execution: plate screen changer Screen diameter 250 mm filter area 491 cm² Sealing ring PTFE / Teflon Heat output approx. 22 kW Number of control zones 4 Operating temperature max. 260°C Operating pressure max. 400 to 500 bar Hydraulic unit designed for quick change (accumulator preloaded with nitrogen) Capacity from 800 to 2000 kg/h Weight 950 kg

Year of construction: 2014, condition: new, machine/vehicle number: RE-HU-2014-1603-1, Filter plate specification 250X250mm Filtering area 0.56m2 Number of filter plate 8pcs of chamber plate including one tail plate and one head plate Filtering pressure 0.6-1.6Mpa Thickness of filter cake 25mm Filtering chamber volume 7L Filtrate discharge Open type outlet Construction material for framework Main material for Nodpeb Dluwefx Agpjcu framework is carbon steel. Contact parts in PVC or SS. Material for chamber plate is PP Working temperature <90 ℃ Overall dimension 960X400X350mm Weight 350KG Buy or rent: Additional information: Please order before please, because the demand is very high.

Condition: used, Year of construction: 2005, operating hours: 12,390 h, Komatsu WA 250PT-5H wheel loader, year of manufacture: 2005, operating hours: 12,390 h, hydraulic quick coupler, engine: Komatsu [101 kW / 137 hp], weight: 13,800 kg, immediately ready for use. Road-legal quick-coupler system. Upon request, we can provide you with a tailored leasing or financing offer. Mr. Mihm (phone) will be pleased to assist you. For more details, please visit our website. Subject to errors and prior sale. For further information, please contact Tobias Ebert. Njdpfoyxkqqsx Agpecu

Condition: used, Year of construction: 1992, table diameter 600 mm table load 250 Kg swivelling range 0 - 135 Grad Ncjdpsygxzrefx Agpsu turning speeds 0,03 - 2,0 U/min connected load frequency 400 V weight 0,4 t Dimensions (LxWxH) 1,1 x 0,9 x 1,0 m Welding turntable including: - Foot switch - Wired remote control - 315mm chuck

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 555 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 82 mm, travel distance Z-axis: 600 mm, workpiece diameter (max.): 250 mm, TECHNICAL DETAILS Counter-spindle speed: 59–4,500 rpm Bar capacity main spindle: 65 mm Bar capacity counter-spindle: 51 mm Travel X1/X2 axis: 195 mm Travel Y axis: ± 41 mm Travel Z axis: 600 mm Max. workpiece diameter: 250 mm Max. turning length: 555 mm Number of tool stations upper turret: 12 Number of tool stations lower turret: 12 All tools driven Main spindle nose: A 2-6 Counter-spindle nose: A 2-5 Feed power X1/X2/Y axis: 1 kW Feed power Z1/Z2 axis: 2.1 kW Maximum loading length: 6,200 mm MACHINE DETAILS Control model: Fanuc 18 IT Main spindle power: 18.5 kW / 15 kW Counter-spindle power: 11 kW / 7.5 kW Bar feeder Max. bar length: 6 m 8 channels with diameters: 22 mm, 27 mm, 32 mm, 37 mm, 42 mm, 47 mm, 57 mm, 67 mm 8 pushers with pusher cone Intermediate sizes can also be loaded Unload magazine Max. bar length: 2 m EQUIPMENT Coolant tank Chip conveyor from 10/2021 Last overhaul of bar feeder 09/2020 (channel replacement, replacement of various bearings, replacement of push rods and spindle liners, including maintenance) Nodpfxeynhihs Agpscu

Condition: used, mileage: 88,630 km, power: 118 kW (160.44 HP), fuel type: diesel, empty load weight: 2,935 kg, overall weight: 3,500 kg, tire size: 215/75R16C, wheelbase: 4,035 mm, color: white, gearing type: mechanical, Equipment: air conditioning, central locking, cooling unit, cruise control, immobilizer system, onboard computer, Features - 3 seats - ABS, ASR - Electrically adjustable and heated exterior mirrors - Electric windows - On-board computer - Central locking with remote control - Radio - Power steering - Cruise control - Air conditioning Body Fiat Ducato panel van fitted with a refrigerated body. - Compartment 1 (LxWxH): 1.78 x 1.62 x 1.76 m (Temperature +10 °C to -10 °C) - Compartment 2 (LxWxH): 1.22 x 0.62 x 1.76 m (Temperature 0 °C to -30 °C) - Compartment 3 (LxWxH): 1.40 x 0.81 x 1.76 m (Temperature 0 °C to +30 °C) - Interior lighting - FRCX 07/2027 Fiat Ducato panel van equipped with a high-quality refrigerated body by Gruau and evaporators from renowned French brand EDT. The vehicle features three separate temperature compartments—two cooling chambers and one heating chamber. Each compartment can be individually controlled, making this vehicle ideal for transporting temperature-sensitive goods such as food, pharmaceuticals, or delicate products. Compartment 1 offers individual temperature control between +10 °C and -10 °C. Compartment 2 allows for individual temperature settings from 0 °C to -30 °C. Compartment 3 is designed for temperatures from 0 °C to +30 °C. Cooling and heating are possible both while driving and via a 230V power connection when stationary. Ncedpfxowwhzkj Agpou The vehicle is ready for registration. German documents and TÜV are included free of charge! Export price on request. Immediately available from our warehouse in Langenfeld. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles. All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. All presentations are made exclusively with original photos taken directly at our premises – ensuring full transparency regarding the actual vehicle condition. Our vehicles undergo thorough reconditioning in our own specialist workshop prior to sale – including mechanical, bodywork, and paintwork checks. This ensures they are optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good—control is better: On request, the vehicle can be inspected by independent organizations such as TÜV, DEKRA, or KÜS – also as part of a remote inspection. Our service offering for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export license plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of custom equipment as requested Looking for something specific? If you currently can’t find a suitable vehicle for your business in our inventory, feel free to contact us – we’re happy to help. For technical details, further photos, or a personal consultation, we’re always at your disposal. All prices quoted are net prices. The content of our website has been created with the greatest care and is regularly updated. Nevertheless, it serves solely for general information and does not replace individual consultation. Only the information in the purchase agreement is binding. Subject to changes, errors, misprints, and prior sale.

Condition: good (used), Year of construction: 1985, machine/vehicle number: 1076-85, Offer 24303 Technical data: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y (transverse) approx. 220 mm - Z (vertical) approx. 400 mm - max. distance milling spindle - table surface 400 mm - Tool holder SK 40 - Work spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeds X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axes digital readout HEIDENHAIN - Vertical milling head tiltable Nedpfxet Dxwge Agpocu - Horizontal spindle counter holder - Machine vice

Condition: new, Year of construction: 2026, functionality: fully functional, Grinding Wheel Dressing Machine: Easy to Operate, Robust, and Precise Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of easy operation and exceptional stability. The solid granite bed ensures the highest precision and durability, while the user-friendly operation maximizes efficiency in your workshop. While you continue production on your tool grinding machine, our dressing machine saves you time and, therefore, money. Ideal for those who value reliable performance and top value for money! Ncsdeubbrtjpfx Agpju

Year of construction: 2025, condition: new, Linear weigher with 100g up to 10,000g weighing range. Weighing/dosing of granular and chunky products. 2 weighing heads with load cells and 2 vibrating feeders allow fast and precision weighing. - Specifications: capacity weighing hopper: 20 L; number of weighing heads: 2; weighing range: 100-10,000g; accuracy: +/- 1-25g; max. speed of the machine in neutral: 20 cycles/minute; power: 220V, 1-phase; stainless steel version SUS 304. Njdpfxsv Nmwio Agpjcu That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2026, functionality: fully functional, The GWDress-250 smartline is the intelligent solution for the precise dressing of grinding wheels up to Ø 250 mm. Thanks to selectable manual or automatic control, dressing processes can be designed with maximum flexibility and efficiency. Performance Data: Rotary axis & feed axis CNC controlled Diamond Grinding Spindle: HSK-50 or customer-specific (e.g., SK-40, Perfect Arbor, etc.) Max. Dressing Wheel Diameter: ø300 mm Max. Dressing Wheel Width: 20 mm Max. Grinding Wheel Diameter: up to ø250 mm Grinding Wheel Speed: 0–1,500 rpm (infinitely variable) Travel Range (Left/Right): 135 mm Travel Range (Forward/Back): 135 mm Dressing Wheel Diameter (Silicon Carbide): ø180 x 10 x ø32 mm Swivel Range: approx. 98 degrees on both sides Dressing Wheel Speed: 0–2,800 rpm (infinitely variable) Dressing Wheel Oscillation Frequency: 0–50 strokes/min (infinitely variable) Dressing Wheel Oscillation Length: 0–50 mm (adjustable) X, Y Axis Optical Scale Resolution: 0.001 mm Capabilities: Dressing of radii and wheel stacks (multi-wheel packs) Power Supply: 380V, 50Hz; Total Power: approx. 1.5 kW DXF Import: Included Camera System: Included (with live transmission via 23" monitor) Software: Latest generation GWDress-Studio with automatic AI measurement included Country of Origin: Austria Njdjw E E S Aepfx Agpjcu

Condition: new, Year of construction: 2026, functionality: fully functional, Performance Data: Diamond Grinding Spindle: HSK-50 or customer-specific (e.g., SK-40, Perfect Arbor, etc.) Max. Dressing Wheel Diameter: ø300 mm Max. Dressing Wheel Width: 20 mm Max. Grinding Wheel Diameter: up to ø250 mm Grinding Wheel Speed: 0–1,500 rpm (infinitely variable) Travel Range (Left/Right): 135 mm Travel Range (Forward/Back): 135 mm Dressing Wheel Diameter (Silicon Carbide): ø180 x 10 x ø32 mm Swivel Range: approx. 98 degrees on both sides Dressing Wheel Speed: 0–2,800 rpm (infinitely variable) Dressing Wheel Oscillation Frequency: 0–50 strokes/min (infinitely variable) Dressing Wheel Oscillation Length: 0–50 mm (adjustable) Ncjdpsha Eh Hsfx Agpsu X, Y Axis Optical Scale Resolution: 0.001 mm Capabilities: Dressing of radii and wheel stacks (multi-wheel packs) Power Supply: 380V, 50Hz; Total Power: approx. 1.5 kW DXF Import: Included Camera System: Included (with live transmission via 23" monitor) Software: Latest generation GWDress-Studio with automatic AI measurement included

Condition: reconditioned (used), modernized machine with new LTG-StoreControl P control system Control system expansion possible as an option 2 identical machines available External dimensions: Overall height 4730 mm Overall width 3270 mm Overall depth 1680 mm 29 supports for 250 kg payload each in the clear internal dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm Ncodpjdnhz Ujfx Agpeu Intermediate shelves are available for 0 load levels, allowing for a 160 kg payload per usable level Intermediate shelves can be manufactured on request Deposit table at a height of 900 mm above floor level - work surface with V2A stainless steel cover Color: Gray / Gray Surface cleaned, signs of use possible Motor power, drive: 2 x 1.5 kW / 400 Volt Subject to errors and technical changes as well as minor deviations in the photos Delivery & installation currently mainly in Germany, Austria and other neighboring countries.

Condition: ready for operation (used), Year of construction: 1990, An HMS punching machine is available. Pressing force: 250t, stroke height: 40mm, installation height: 450mm, ram adjustment: 20mm, stroke rate: 120 strokes/min, overall system dimensions X/Y/Z: approx. 17000mm/8000mm/3500mm. Including coil and strip processing. Documentation available. On-site inspection is possible. Expected to be available from September 2025. Nedpjv Sct Ejfx Agpocu

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 320 mm, travel distance Z-axis: 1,220 mm, spindle speed (max.): 5,500 rpm, turning diameter: 250 mm, turning height: 1,250 mm, TECHNICAL DETAILS Turning diameter: 250 mm Nsdpfx Agjwymvfspocu Swing diameter: 280 mm Turning height: 1,250 mm X-axis travel: 320 mm Z-axis travel: 1,220 mm Chuck diameter: 250 mm Spindle speed: 5,500 rpm Diameter of front bearing: 130 mm Spindle bore: 65 mm Control Control system: Siemens Sinumerik MACHINE DETAILS Total power requirement: 80 kW Weight Machine weight: approx. 17 t

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: VM-WO-250-90-0-2-AAM00064R, total length: 1,600 mm, load capacity: 250 kg, throat depth: 650 mm, Schmalz plate vacuum lifter, original packaging, year of manufacture 2024, with two suction pads, maximum plate load of 250 kg. Boom arm swivels 180°, up to 3500 mm. Suction plate design: transverse orientation. Suction pad length: 550 mm, width: 200 mm, quantity: 2 pcs. Accessories: Spiral hose for compressed air supply: 2500 mm, compressed air supply length to crane: 12 m, number of hose connections: 2 pcs. Weight: 0.00178 kg. Customs tariff number: 84289090. Country of origin: Germany. Ncedpsycva Rsfx Agpou

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, Pester Pewo pack 250 compact trade fair demonstration machine (no production hours) New build 2025 The PEWO-pack 250 compact includes the following assemblies (standard equipment): - Vertical infeed transfer conveyor - Protection rating: IP54 (standard) - Control cabinet: swiveling - Proximity switch: Wenglor (standard) - Pneumatics: pneumatic (standard) - Signal light: three-color (standard) - Electrical specification: electrical standard S rev 15 - Frequency inverter: Lenze (standard) - Product infeed: linear, central Technical data: - New operator interface HMI - Type: HMI 15" Pester Tangius (standard) - New control system: Schneider Electronics - Voltage: 3x400V+N+PE, 50 Hz/60 Hz - Operator side: right - Safety cover: acrylic glass (standard) - Paintwork: VA design (standard) - Packaging material - film: PE flat film - Documentation - language: 2x German + 1x CD - Documentation - version: standard - Documentation - supplier: 1x - Discharge height (preliminary, other machine): not yet known - Infeed height, Pester machine: 900 - 950 mm - Discharge height, Pester machine: 980 - 1030 mm - K-pallet 400x180x250 mm for Pack compact Nedpfx Aoym N Icegpscu Power by Knoll VpA

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Ncjdpfsw Hquxox Agpeu Height: 1,600 mm Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4