Used Polygraph Langarm-Drahtheftmaschine / Long Arm Wire Stitching Machine for sale (71,584)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Iedpfx Aaozlc Tboyeaw

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Verfahrwege X 350 mm Ijdpfxowzyvhj Aayjaw Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2005

Condition: used, Year of construction: 2008, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2008 Control : Sonstige Movement X/Y/Z : 550/350/400 mm Workingspace: Movement in X/Y/Z:550/350/400 mm Movement in U/V:550/350 mm Table size:900 x 600 mm Workpiece dimensions (max.):1.200 x 700 x 400 mm Load capacity (max.):1.500 kg Dielectricheight (min./max.):0/435 mm Clearance angle (max.):+/- 45°/400 mm Generator: Technology:ISOPULS-Doppelquellengenerator Cutting speed:400 mm²/min Finest arbitration:0,20 μm Ra Wire: Standard diameter:0,25 mm Wire guiding:Closed diamond guides Equipment/Accessory: Tankcapacity:1.200l Dielektrikum Dielektrikumsmanagement I:Filtercartige Dielektrikumsmanagement II:Chiller, Eckert Setup operations:Electronic Handwheel Workpiececlamping:Clampingjaw, EROWA Iaodpfx Aaszbzb Reyew Further Accessory:Misc. Electrodeholder, clamping devices and Erodingwire : Attention:The displayed Deionisationsfilters are not included in our offer.

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Available for viewing at our premises in Semsales (Switzerland). Wire guides, 0.25 mm. Iodpezf Akyefx Aayeaw Large bobbin kit.

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Iaodpfx Aaou T Ty Heyow Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm Iasdpfx Aaow Spa Neyow travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: excellent (used), Year of construction: 2016, X-axis: 550 mm Y-axis: 350 mm Z-axis: 400 mm Max. workpiece dimensions: 1,200 x 700 x 400 mm Max. workpiece weight: 1,500 kg Machine weight: 2,850 kg Cutting range: 30 degrees on 400 mm Includes operating manual. Iodpfxozcpife Aayoaw Machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 2014, functionality: limited functionality, X-axis: 400 mm Y-axis: 300 mm Iodpfx Aaoyvtbyeysaw Z-axis: 220 mm The machine was in daily use until mid-April; however, the "automatic threading" function is not working.

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Height: 1360 mm Iaedpfx Aoyxfqrsayjw Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Iedpfxoy Snbmo Aayeaw Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Iaedeza U Nljpfx Aayew Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15“ TFT touch screen monitor Handheld remote control Ijdezhvhwjpfx Aayeaw Automatic wire threading with thermal wire cutting, Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: € 2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Iaodpfx Aozhvhdsayew Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15” TFT monitor Handheld remote control Automatic wire threading with thermal wire cutting Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English A horizontal rotary axis (6th axis) is included. This was removed due to lack of need and was not in use. Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: €2,000.00 Commissioning, price based on effort Basic training, price based on effort

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. Iedpjx R Uzdjfx Aaysaw A very clean looking machine. On site viewing and inspection recommended

Year of construction: 1998, condition: ready for operation (used), X-axis: 500mm, y-axis: 350mm, z-axis: 256mm, taper cutting device: U=70mm, V=70mm, connected load: 9kVA, rated current: 13.1A, weight: 4.4t, equipment: automatic wire threading, lowering water tank, universal clamping frame, hand-held control unit, AgieSetup 3D automatic workpiece position compensation, flushing gun, paper cartridge filter and Lei/Wirecut programming software with dongle. An on-site inspection is possible. Ijdpfx Ajzadkxoaysaw

Condition: good (used), Introma ZD-2D Wire Stitcher Machine in very good condition, recently serviced. Iodpezdavrefx Aayoaw Technical specifications: Capacity: 180/min Maximum stitching thickness: 25mm Wire diameter: max. 1mm Power supply: 380V Weight: 230kg The machine features an adjustable table for block and booklet stitching. Front margin. Instructions included.

Condition: good (used), Year of construction: 2015, functionality: fully functional, GF AgieCharmilles CUT 2000 S Wire EDM Machine – Year 2015 – EROWA Tooling Package Ijdszgvl Tspfx Aayeaw High-precision CNC wire EDM machine from GF AgieCharmilles in excellent technical condition. Manufacturer: GF AgieCharmilles Model: CUT 2000 S Year of manufacture: 2015 Axis travels: X-axis: 350 mm Y-axis: 250 mm Z-axis: 256 mm Maximum workpiece size: 750 × 550 × 250 mm Maximum workpiece weight: 400 kg Machine hours: Operating hours: 73,182 h Erosion hours: 16,508 h Technical data: Power supply: 3 x 400 V Machine weight: approx. 3,500 kg Equipment: • Automatic wire threading • CNC control system GF AgieCharmilles • Complete EROWA tooling package included • Multiple EROWA fixtures and clamping elements • Precision EDM tooling and accessories (see photos) Advantages: • Very reliable EDM machine for tool and precision part manufacturing • High cutting accuracy and excellent surface finish • Modern GF AgieCharmilles control system Condition: The machine is in good working condition. Machine is currently powered and can be inspected and tested under power. Location: Czech Republic Availability: Immediately

Condition: excellent (used), Year of construction: 1968, Hohner Favorit stapling machine, year of manufacture 1968 Runs quietly and operates flawlessly Iaodpfx Aajuiznqeysw Power connection: 380 V Dimensions: W 70 cm x D 74 cm x H 146.5 cm, weight 280 kg

Condition: used, Year of construction: 2006, machine/vehicle number: BM0000029, controller model: WINDOWS XP, number of spindles: 42, plate height: 60 mm, plate length: 2,800 mm, plate width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Vertical CNC machining center for drilling, milling, and dowel insertion with an additional robotic arm for loading! The machine must be picked up between June 10, 2026, and June 30, 2026! The machining center consists of two machines as follows: 1. BIESSE BREMA VEKTOR 15-18 R Working area X-axis: 2,800 mm Working area Y-axis: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Iodey Uvnaspfx Aayjaw Maximum panel thickness: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles in X Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles in Y Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes milling spindle: 3 Automatic tool changer: Yes Number of tool magazine slots: 10 Control and safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC marking Safety system: Safety light curtains 2. KUKA KR 180 L100-2 K 2000 Maximum panel width: 1,300 mm Maximum panel length: 2,800 mm Maximum payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system Barcode scanner HONEYWELL Protective netting on the machine The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8530

Condition: as good as new (ex-display), functionality: fully functional, Equipment: clamp, Fast and easy booklet and block stitching The Rinak electric stapler is ideal for demanding applications involving smaller print runs in offices, schools, copy shops, and printing companies. Its ease of use and the ability to quickly switch between block and booklet stitching are essential features when the machine is operated by different users in a company. With the Rinak, perfect presentation materials can be quickly and economically produced, even in smaller print runs. Easy to use The table can be switched from block to booklet stitching with just one movement. The precise staple spacing – particularly important with ring staples – and the accurate positioning of the staples are guaranteed by the adjustable stop. The magazine can be easily opened to the front, allowing for quick and trouble-free reloading of staples. The machine is equipped with a safety hand guard. The height-adjustable stand is included and can be variably adjusted between 80 and 110 cm. Booklet stitching up to DIN A4 size, up to 30 sheets (equivalent to 120 pages) Block stitching up to 40 sheets Stitching is also possible with ring staples. Staple strength adjustment for thin and thick paper layers. Iasdpfey Tva Tsx Aayow 230 volts / operating instructions

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Iaodsy N Df Njpfx Aayew

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, The machine was manufactured in 2011, but it was not put into operation and modernized until 2016. As part of this process, an electrical update for the WorkPartner automation system was carried out! TECHNICAL DETAILS Workpiece weight max.: 200 kg Travel range X-axis: 1,800 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,100 mm Workpiece height max.: 250 mm Workpiece width max.: 750 mm Workpiece length max.: 550 mm Feed length X-axis: 350 mm Iedszf E Nxjpfx Aayoaw Feed length Y-axis: 250 mm Feed length Z-axis: 256 mm MACHINE DETAILS Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,760 x 2,455 mm Total weight: 3,700 kg EQUIPMENT Documentation/Manual Cooling unit Note: The operating hours of the machine can be found in the last image.

Condition: good (used), Year of construction: 2001, Travel ranges X / Y / Z: 220 x 150 x 150 mm Z-axis unit: Standard equipment (= 5th axis) Max. taper angle: 15° (for a workpiece 100 mm thick) Taper machining unit: Standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 – 0.25 mm Dimensions L x W x H: 1900 x 2345 x 2060 mm Isdpfx Ajg Icdyjayjaw Weight: 3500 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Condition: new, functionality: fully functional, Crimp force controller. Iaodoy Ivdbopfx Aayew

Condition: good (used), Year of construction: 2002, functionality: fully functional, Gamma 333 fully functional. Ijdpfx Aaey Ah R Neyoaw