Used Pyramidal Bending Machine for sale (65,062)

Condition: used, functionality: fully functional, Pipe bending machine Manufacturer: Ercolina, Type: Top-Bender Technical data Manufacturer: Ercolina Type: TOP-BENDER Year of manufacture: unknown Bending capacity: Ø 64 x 4 mm Bending angle: 180° Weight: 135 kg Accessories - Blue tooling o R90 d42-1-1/4 o R67 d 1“ o R100 d1-1/2“ Dkodpozdf N Rsfx Anzor - Copper tooling o 1 1/4“ (2x) o 1 1/2“ (2x) o 1“ (2x) All information without guarantee. A demonstration with the machine running can be arranged at any time in our showroom.

Condition: used, Engine and gearbox from an Allgaier, part of a Bihler GRM 80, model year 1984. ATTENTION!! Dodpfjzl Ez Ijx Anzjkr This offer includes only the engine and gearbox as shown in the images. According to the previous owner, the gearbox was overhauled and has not been used since the overhaul.

Condition: new, Top and bottom blades removable in segments PNEUMATIC CYLINDER!!! Including manual back gauge Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of the fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Dkedjga T Daepfx Anzjr Max. bending angle ----- 0 - 135 Weight ----- 590 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, Finger bending machine with a segmented top clamp Including a manual back stop PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2 mm Max. working length ----- 1270 mm Max. opening width ----- 45 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Dodpfx Aega T Dhjnzokr Max. bending angle ----- 0 - 135 Weight ----- 360 KG Width ----- 1620 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, engine 2,8 KW Dkjdpfoy H N Nzjx Anzor weight of the machine ca. 320 kg dimensions of the machine ca. 86 x 90 x 85 cm

Condition: new, sheet width 1550 mm Dsdpfx Anoyvvrhszekr plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: Dodpfx Aeyvvnionzjkr - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, Year of construction: 2019, sheet width 1050 mm plate thickness 4,0 mm roll diameter 110 mm Dksdozh N Uwepfx Anzjr total power requirement 2,2 kw

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Dodpfsw Dgi Tjx Anzjkr Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: new, input voltage: 230 V, - Shaft diameter 40 mm - Can be used horizontally/vertically - Foot control - Emergency stop - Includes 1 set of standard steel rollers - Documentation Djdjlxw Rmspfx Anzskr - 230V

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning Djdozcpu Uopfx Anzokr All information without guarantee.

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) Dodpfspxmauex Anzokr - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets

Condition: new, Special offer price for in-stock items. Only while supplies last. Price ex works, plus VAT. Round bending machine HRM 610, Bernardo Roller length: 610 mm Max. sheet metal thickness (400 N/mm2): 2.0 mm Roller diameter: 60 mm Length: 1200 mm Depth: 550 mm Height: 1030 mm Weight approx.: 166 kg Features: - Top roller with horizontal insertion groove for producing tight radii - Convenient pre-bending thanks to asymmetrical roller arrangement - Easy removal of the finished workpiece by pivoting the top roller - Lower and rear rollers equipped with wire insertion grooves as standard - Optimal price-performance ratio, supplied with a base frame as standard - Roller drive via a robust gear system - Adjustable rear roller for conical rounding - Bending rollers made of high-quality steel - For producing cones, tubes, cylinders, etc. Scope of delivery: Dksdpfxshmbpqo Anzsr - Conical bending attachment - Lower and rear rollers with wire insertion grooves - Base frame

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Dksdpezka H Asfx Anzjr

Year of construction: 2007, condition: ready for operation (used), A Wafios CNC wire and tube bending center is available. Axes: 9, wire diameter range: 1.5mm-8mm, tube diameter range: 3mm-10mm, wire tools: 2.5mm/4mm/5mm, tube tools: 6×1mm, feed speed: 120m/min, feed roller pairs: 3, bending head transverse stroke min./max.: -200mm/200mm, bending head stroke min./max.: -120mm/25mm, bending head orientation: 0°/30°, return length range: 400mm-1300mm, bending moment: 520Nm, upsetting force: 10kN. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2300mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Dsdpszka Nwofx Anzjkr

Condition: used, functionality: fully functional, Year of construction: 1996, Ring bending machine, ZOPF Model RS 302 - Motor-driven - Two-roller drive - Shaft diameter 30 mm - Equipped with standard rollers - Bending capacity up to round tube 48 x 3.2 mm - Solid material up to 30 mm - Weight approx. 180 kg Dkjdpfx Anozl Ud Eozjr - Motor 0.75 kW, 400 V, 50 Hz, 3-phase.

Condition: new, functionality: fully functional, Year of construction: 2026, CNC Rebar Bending Machine – GW45 | Ø 6–32 mm | 4 kW | 24 Month Warranty CNC-controlled rebar bending machine for medium to heavy-duty reinforcement steel processing. The GW45 is equipped with a large 360 mm turntable and is capable of bending rebar with diameters from 6 to 32 mm. Its compact and mobile design is ideal for both workshop and on-site applications. Key Specifications: • Rebar Diameter: 6–32 mm • Turntable Diameter: 360 mm • Motor Power: 4 kW • Power Supply: 380 V • Machine Weight: 270 kg • Dimensions: 880 × 850 × 800 mm ✅ CNC control – programmable bending angles ✅ Large 360 mm turntable for heavy-duty rebar ✅ Compact & mobile – suitable for on-site applications Dksdpfx Asy Swpgenzsr ✅ All spare parts in stock – motor, bending discs, control electronics ✅ 12 months warranty ✅ CE certified | Technical support available

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles Dedpfxsh U Rzgo Anzjkr CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: new, Year of construction: 2026, CORMAK RBM 40HV Tube and Profile Bending Machine The CORMAK RBM 40HV tube and profile bending machine is a precise three-roll, roll-type bending machine designed for bending steel tubes, rectangular profiles, and solid materials. It enables operation in two working positions – vertical and horizontal – allowing flexible adaptation to different production conditions. Equipped with hardened rollers and a graduated upper roller pressure adjustment system, it ensures high repeatability of bending radii and excellent resistance to wear. Main advantages of the machine Roll-type (non-mandrel) bending system – enables bending of tubes and profiles without the risk of cross-section deformation. Vertical or horizontal operation – allows adaptation to the technological layout of the workstation. Mechanical upper roller pressure adjustment with vernier scale – precise setting of the bending radius. High machine weight (485 kg) – ensures excellent stability and vibration-free operation during bending. Ground and hardened guide rollers – increased durability and accurate material guidance. Foot pedal operation – comfortable and safe control for the operator. Left and right rotation – versatility when producing complex shapes. Design and technology The CORMAK RBM 40HV has been designed for intensive use in industrial environments. The machine body is made of thick-walled, rigid steel components, providing high resistance to twisting forces and bending loads. The bending rollers are manufactured from hardened and precisely ground steel with a diameter of 40 mm, increasing their resistance to wear. The pressure adjustment system with a vernier scale allows the operator to repeatedly set the same bending radius, which is particularly important in serial production. Precision and work efficiency The CORMAK RBM 40HV tube and profile bending machine provides high bending accuracy for both individual components and series production. The gearbox with a motor power of up to 2.2 kW (S6) enables smooth bending of demanding materials, including steel tubes with a wall thickness of 2 mm. The possibility of operation in both rotation directions significantly simplifies the production of closed arcs and spiral-shaped structures. Applications The RBM 40HV model is a professional tool for the metalworking industry, designed for bending materials with various cross-sections. It is ideal for: production of railings, handrails, canopies, and structural components, companies specializing in steel tube and profile processing, metal workshops manufacturing small architectural elements, serial production of highly accurate bent components. Standard equipment Side guide rollers Foot pedal control system Set of working rollers Technical and Operating Documentation (DTR) in Polish CE Declaration of Conformity Technical specifications Parameter Value Material: round tube 50 × 2 mm Material: rectangular profile 50 × 50 × 2 mm Material: round solid bar 35 mm Material: rectangular solid section 35 × 35 mm Roller diameter 40 mm Motor power S1 1.5 kW / S6 2.2 kW Dksdsu Snm Iopfx Anzjr Power supply 3-phase, 400 V Dimensions (L × W × H) 900 × 850 × 1700 mm Weight 485 kg

Condition: new, Year of construction: 2026, CORMAK RBM 30HV Tube and Profile Bending Machine The CORMAK RBM 30HV tube and profile bending machine is a versatile three-roll, non-mandrel bending machine designed for professional bending of steel tubes, rectangular hollow sections, and solid bars. Its compact design, ability to operate in both vertical and horizontal positions, and precise upper roll adjustment make it an ideal solution for workshops, production facilities, and service companies where reliability, accuracy, and application flexibility are essential. Main Advantages of the Machine Non-mandrel bending system – enables bending without deformation of the cross-section, including applications requiring larger bending radii. Vertical and horizontal operation capability – provides flexibility in machine positioning depending on the workspace and production process. Precise upper roll adjustment with vernier scale – allows repeatable and controlled bending operations. Ground and hardened guide rolls – ensure accurate material guidance and long service life of working components. Hardened steel rolls – provide high wear resistance and maintain accuracy during long-term operation. Foot pedal control – enables convenient and ergonomic machine operation. Two-direction roll rotation – allows bending of complex shapes and closed arcs. Construction and Technology The CORMAK RBM 30HV is built on a rigid steel frame that provides resistance to deformation during bending operations. The 30 mm diameter rolls are made of hardened steel, ensuring durability even when working with demanding materials. The adjustable upper roll allows precise setting of the bending radius, while the 0.75 kW drive motor provides sufficient working force while maintaining compact machine dimensions. The machine can operate in both vertical and horizontal configurations, depending on the type of material being processed and available workspace. Precision and Work Efficiency Thanks to the three-roll bending system and precise pressure adjustment, the CORMAK RBM 30HV tube and profile bender provides high bending accuracy, even when processing thin-walled steel tubes and delicate closed profiles. The ability to rotate the rolls in both directions significantly simplifies the production of complex curves and spiral-shaped elements. The rotation speed of 9 rpm ensures an optimal working pace while maintaining full control over the bending process. Applications The CORMAK RBM 30HV is designed for light and medium-duty production and service applications. It is particularly suitable for: metalworking and fabrication workshops, light steel structure manufacturing, tube and profile fabrication in the furniture and fencing industries, production of decorative and functional shaped components. Standard Equipment Side guide rolls Foot pedal control system Technical documentation (DTR) in Polish CE Declaration of Conformity Dedpfx Aou Snlkonzekr Technical Specifications Parameter Value Round tube capacity 30 × 1 mm Rectangular profile capacity 30 × 30 × 1 mm Round bar capacity 16 mm Solid rectangular bar capacity 30 × 10 mm Roll diameter 30 mm Roll speed 9 rpm Motor power 0.75 kW Power supply 3-phase, 400 V Dimensions (L × W × H) 1200 × 750 × 1210 mm Weight 252 kg Manufacturer: CORMAK

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Motor-controlled back stop with folding cams up to 1500 mm Several program sequences with different bending angles and stroke heights are possible Control Multibend 2000 Polished bending rail Weight: 1,700 kg Dkodpeza Ahpjfx Anzsr

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 450 kg, total length: 900 mm, total width: 850 mm, total height: 1,700 mm, input voltage: 400 V, PIPE AND PROFILE BENDING MACHINE This new pipe and profile bending machine is designed for the efficient forming of round and rectangular tubes, as well as round and square solid bars. Its robust construction, compact dimensions and 2.2 kW motor make it a practical solution for metalworking workshops, fabrication companies and industrial production facilities. The machine is suitable for producing curved components used in steel structures, frames, railings, gates, furniture, architectural elements and a wide range of custom metalwork applications. MATERIAL CAPACITY Round tube: up to 70 x 2 mm Rectangular tube: up to 60 x 60 x 3 mm Round solid bar: up to 35 mm Square solid bar: up to 35 x 35 mm TECHNICAL SPECIFICATIONS Roller diameter: 50 mm Motor power: 2.2 kW Power supply: 400 V, three-phase Machine dimensions (L x W x H): 900 x 850 x 1700 mm Machine weight: 450 kg KEY ADVANTAGES Suitable for tubes, profiles and solid bars Wide material capacity Robust and stable construction Compact machine footprint Simple and convenient operation Suitable for workshop and production use New and fully operational machine DOCUMENTATION AND SERVICE 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Dkedpfx Aoytffwenzsr Technical documentation (DTR) in English DELIVERY We can arrange delivery of the machine directly to the customer. Transport costs are calculated individually according to the delivery destination and the carrier’s quotation. Please contact our sales department to receive further information, a commercial offer or an individual transport quotation. Visit our website to explore our complete range of metalworking machines and equipment.

Condition: used, Year of construction: 1993, 3 Rollers Bending Machine ZOPF TRENNJAEGER RS 302 ME Year of construction: 1993 Capacity: 1/4'' to 1 1/2'' - Ø 10 mm to Ø 60 mm Rectangular tube 50 x 30 x 3 Square tube 40 x 40 x 3 (see description on photo) Dsdozku Ibspfx Anzjkr Delivered with: 1 set of rollers 1'' - 6/4'' - 1 1/4'' + various (see photos) Voltage: 380 V Dimensions (L x W x H): 1000 x 1000 x 1600 mm Weight: approx 200 kg

Condition: good (used), Scharringhausen round bending machine Dkjdpfx Aneimmb Iozsr Type: UDR-X1-3 Capacity: 3000 x 30 mm Tube length: 3100 mm Upper tube diameter: 470 mm Lower tube diameter: 410 mm Engine power: 70 HP Dimensions: 830x245x295 cm LxWxH Weight: ca 55000 KG Included documentation Movie available!

Condition: new, Year of construction: 2023, neu 2023 9656 prompt, Zwischenverkauf v Dkedowira Ujpfx Anzor Türkei 2600 € 1 1 1050 mm 1 mm 56 mm 1400 mm 700 mm 1120 mm 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH