Round cylindrical bending machine

Scharringhausen UDR X1 3

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, DAVI_MCB 3060 WT 4-roll plate bending machine CNC _ 3000x65 MM - Year of make 2007 Njdpfx Ajy D Npiofwoda Capacity plate width 3100 mm Plate thickness 65 mm Prebend 55 mm TOP ROLL 600 MM LOWER ROLL 550 MM Configuration installed: • Surface hardening of the four rolls • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller DAVI GENIUS semiautomatic and fully automatic programmable. with digital readout of the 4rollers for use in manual operation, • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service Voltage electric 3phase Vac 380/50 power Kw 75 nr.1 top support hydraulic operated , shell ID max 5 mtrs - CNC programmable nr.1 side support hydraulic on the left nr.1 side support hydraulic on the right, finger pusher to swing the sheet plate forming cones rolling.

Condition: used, functionality: fully functional, Truxor Amphibious Vehicle Suction Excavator with pump and cutter, grab for removal of sludge, sediment, or aquatic vegetation. The Truxor DM 5045 is an amphibious tool carrier, specifically designed for operations in water bodies, wetlands, and shorelines. Engine: Kubota V1305, liquid-cooled, 4-cylinder, water-cooled turbo diesel. Emission standard: EURO 3 33kW/44.9 hp/3000 rpm. Coolant volume: approx. 8 l. Electrics: Generator 12 V, 40 amp, 45 Ah battery, work lighting. Fuel: 35 l tank, consumption min. approx. 3.8 l/h, average approx. 4.5 l/h. Hydraulic system: demand control with dynamic adjustment, max. 140 l/min. Tank capacity 19 l + system approx. 36 l. Control via joystick: vehicle movement, lifting, tilting, weight distribution. Cab: foldable canopy, adjustable driver's seat, instrument panel. Speed: 0-100 m/min (without attachments). Front lift: lifting capacity 250 kg. Quick-change attachment system, tilting function. Saltwater-resistant aluminum, hot-dip galvanized steel frame. Length: 4,700 mm, with lifting arm 5,000 mm. Width: 2,060 mm. Height max. 2.59 m, min. 1.9 m. Weight: 1,400 kg (vehicle only), additional weight for attachments. Truxor available ex stock Gladbeck without trailer. Nodpfxeyn Hpao Afweda

Condition: excellent (used), Standard boiler 30 t/h. Year of manufacture: 2012. Equipped with two oil burners. Nedpexgn Itsfx Afwsda

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm Nodpfjcxxx Rjx Afwjda :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: used, Year of construction: 2010, operating hours: 26,827 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 2,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 42 kVA, controller manufacturer: Siemens, controller model: 840 D SL Operate, workpiece weight (max.): 6 kg, total height: 2,800 mm, total length: 7,000 mm, total width: 5,000 mm, table width: 700 mm, table length: 2,900 mm, table load: 2,150 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 8,280 h, spindle motor power: 23,500 W, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, We are offering this used Deckel Maho DMF 260 / 700 vertical machining center, year of manufacture 2010. X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm CNC control: Siemens 840 D SL Operate Main spindle: Spindle speed range: 8,000 rpm Main spindle drive power: 23.5 kW Tool holder: SK 40 Worktable: Njdsytruxjpfx Afwoda Clamping surface: 2,900 x 700 mm Max. table load: 2,150 kg Tool magazine: Number of tool pockets: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Feed rates: Rapid traverse (X / Y / Z): 40 m/min Max. feed rate: 40,000 mm/min Max. feed force: 8 kN Total power requirement: 42 kVA Machine weight approx.: 14.5 t Space requirements approx.: 7.0 x 5.0 x 2.8 m Chip conveyor Coolant system High-pressure cooling Internal coolant supply Paper band filter 2x rotary windows Tool magazine, 30 positions Probe Operation mode 4 Prepared for a 4th axis At approx. 7,500 spindle hours, the X-axis and tool changer were overhauled. If you have any questions or require further information, feel free to send us a message or give us a call. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, and subject to prior sale!

Condition: used, first registration: 03/2013, color: grey-black, Year of construction: 2013, gearing type: other, LICENSE PLATE: XA020AJ TITLE: TECNOKAR SWAP BODY SEMI-TRAILER WITH CRANE REF: 25R14 YEAR: 03/2013 AXLES: 3 MAXIMUM LENGTH: 9.60 m COUNTRY OF ORIGIN/EXPORT: Italian PAYLOAD: 25900 kg - TRAILER: 38000 kg gross vehicle weight TYPE OF EQUIPMENT: swap body EQUIPMENT MODEL: HYVALIFT 30.67 SK EXTENSION: yes SWIVEL: yes ROLLER: retractable ADR: no CARRIAGEABILITY FROM: 5.00 m + 0.20 m TO: 7.60 m + 0.20 m SUSPENSION: pneumatic BRAKES: disc TIRES: 385/65 R.22.5 ACCESSORIES: - PENZ 15ZRT8.50 folding crane, year 2012, 1 extension on the 1st boom and 2 extensions on the 2nd boom - joystick - GUSELLA SHZ305/K/0 grab with 6 blades, year 2012, capacity 300 liters, weight 428 kg with built-in rotator REFURBISHED: no SERVICED: no TIRE CONDITION: 40% - Errors and omissions excepted The prices shown do not include VAT. Please contact the sales representative for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SWAP BODIES operates in the sale and purchase of industrial and commercial vehicles, specializing primarily in the waste management sector. Nedpfx Ajx Twfqofweda Specialized in trucks, trailers, and swap body equipment. With a readily available stock of over 50 trucks and over 150 swap bodies, containers with and without cranes. S.E.&O Given the number of listings and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: good (used), Various press brake tools, punches, dies Nodpfx Aow Emf Djfwsda Bending length 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, MAZAK QT 20 Model: OT-20-N-K Turret: 8 positions Nodswulzvspfx Afwjda Motor: 18.5 kW Year: 1988 Weight: 11,700 lbs Chuck: diameter 250 renewed operational panel

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Plasma cutter Hypertherm Powermax 800 Nodpsulc Ixjfx Afwsda Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Nedpfxji Ar Ruj Afweda Max. table load: 1500 kg