Used Ruhrmann Eccentric Press for sale (12,733)

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) Bdedpfxou Rwa Io Ab Deg T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: excellent (used), Year of construction: 1996, Excentrical press: Bdedpehtiwhsfx Ab Dsg Capacity: 100 ton Clutch: airclutch Gooseneck depth: 340 mm Slide adjustment: 10 > 130 mm Command: 400 mm Max distance plate -- slider: 300 mm Dimensions of the table: 950 x 630 mm Dia of passage in the table: 200 mm Dimension sole of the coul. (L x W): 560 x 320 mm Variable stroke: 10 > 130 mm Motor power: 8.5kW Length G -- D: 1500 mm Width Front -- Rear: 2380 mm Height: 2800mm Weight: 9.5 ton

Condition: used, Year of construction: 1992, pressure 25 t Bdjdpfsykb Dksx Ab Dog throat 375 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm table surface area 800 x 580 mm clamping plate 800 x 450 mm ram surface Platte 575 x 220 mm total power requirement 1,5 kW weight of the machine ca. 2,5 t

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, throat depth: 440 mm, distance table to ram: 400 mm, total length: 37,200 mm, total width: 24,000 mm, total height: 18,200 mm, overall weight: 12,600 kg, ram adjustment: 110 mm, ram stroke: 40-180 mm incl. Helmerding feed, 400 mm x 4 mm Bsdpfx Astu Hvwob Dedg Strokes: 40 + 60 1/min Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Condition: used, Single-column – Eccentric press RICHTER Type PEKRS 80 Year of manufacture 1970 – Overhauled in 2024 Clamping force 80 tons Reach 350 mm Table size 900 x 650 mm Through-hole in the mounting table Ø 200 mm Ram area 700 x 500 mm Stroke rate 70 strokes/min Stroke adjustment 6 – 100 mm Ram adjustment 85 mm Installation height max. 400 mm Arbor hole Ø 50 mm Table height above floor 810 mm Motor power 8 kW Power connection 400 volts, 50 Hz Bedpfsi Db Ibjx Ab Dsdg - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with shear plate in the ram - Grease central lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest safety standards with new electrical system Control system rebuilt in 05/2024 – suitable for manual feeding operations – in accordance with DGUV Information 209-030 Press Inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machinery - Presses - Part 1: General safety requirements EN ISO 16092-2: Machinery - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for quick fault localization - New electrical cabinet, mounted on the side of the machine - Completely based on SIEMENS, with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and interlocking - Electric foot switch - Cam mechanism with run-on monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure gauge - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand 3 = Single stroke, foot 4 = Continuous operation, foot 5 = Automatic continuous operation 6 = Reverse operation

Condition: used, Year of construction: 1980, Pressing force 1,100 kN Adjustable stroke 20 - 120 mm Bjdpfx Aeyg Ecpeb Dsdg Ram adjustment max. 85 mm Strokes per minute 35 / 70 1/min Machine weight approx. 5,100 kg Further data and images available on request

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm Bodpou N A U Isfx Ab Dedg table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: good (used), Year of construction: 1996, Erfurt Press Pressing force: 6,300 kN Stroke length: 80-350 mm Stroke adjustment: 150 mm Bdodpezlyrhefx Ab Deg Installation height: 800 mm Table surface: 2,800 x 1,400 mm Stroke rate: 20-80 strokes/min Control system: Siemens S5

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Bjdpfx Ajv Uraasb Djdg Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Year of construction: 2002, pressure 80 t throat 300 mm stroke 8-110 mm no. of strokes 100 Hub/min ram - range of adjustment 75 mm table surface area 750x590 mm ram surface 540x400 mm hole in the table 200x200 mm table height 780 mm tool hole in ram Ø 40 mm total power requirement 11 kW weight of the machine ca. 5,5 t Bdjdpfsy I Dd Nex Ab Djg dimensions of the machine ca. BxTxH 1200x1700x2700 mm

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm Bedpfx Absvbk Rwj Dodg number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Year of construction: 1971, condition: good (used), Pressing force: 63 t Table: 660 x 480 mm Slider: 450 x 280 mm Overhang: 250 mm Slider stroke: 16 to 125 mm Sheet thickness, continuous stroke: 3.2 mm Max. distance between table and slider: 417 mm Die opening: 280 x 250 mm Slider adjustment downwards: 70 mm Stroke rate: 80/min Power consumption: 6 kW Bdsdpfx Abeh N S Sdo Dog Accessories/equipment: Condition: good Weight: 5 t Dimensions: 1,500 x 1,600 x 2,700 mm

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Bdodpfjhz Ua Ssx Ab Dog

Condition: good (used), Year of construction: 1989, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 63 t, table width: 800 mm, table length: 630 mm, total length: 17,900 mm, total width: 14,250 mm, total height: 25,500 mm, overall weight: 5,850 kg, height adjustment type: mechanical, stroke adjustment: 105 mm, Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW Bdsdpstzxdzefx Ab Djg - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm Bdjdou Nfkljpfx Ab Dog throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *

Condition: used, Year of construction: 1991, pressure 60 t throat 280 mm stroke 10 - 90 mm ram adjustment 60 mm no. of strokes 110 Hub/min Bdsdpfev Az T Ssx Ab Dog table surface area 740 x 550 mm clamping plate 740 x 555 mm ram surface 380 x 200 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3850 kg dimensions of the machine ca. B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely technically inspected - new colour - shaft pulling, crack inspection, new seals - new control cabinet with touchscreen - new braeke plate - current press inspection

Condition: good (used), Year of construction: 1981, Machine parameters: Rated forming force: 250 t Stroke: 45 mm Description: Bdodpfjzpxzisx Ab Dog The machine is in good technical condition; testing can be arranged upon prior agreement. Dimensions: 2580 x 1350 x 2975 mm Power requirement: 22 kW Czech documentation Machine weight: 12,880 kg

Condition: used, Year of construction: 1961, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm Bedpjzrprdofx Ab Dsdg hole in the table 230 mm table height over floor 800 mm ram surface 310 x 255 mm ram adjustment 63 mm power requirement 5,5 kW weight 3,95 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Bjdpfx Abjy D Abfj Djdg Weight: approx. 500 kg Accessories / Special features: • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Bedpok S Htxefx Ab Djdg Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Bsdpfxjzkmi Do Ab Djdg Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Bsdpfx Absyiflms Dedg

Condition: used, Year of construction: 1961, pressure 25 t throat 200 mm Bjdpotqqxbefx Ab Dodg stroke 4 - 80 mm table surface area 595 x 410 mm ram adjustment 70 mm no. of strokes 150 Hub/min table adjustable in height 240 mm total power requirement 1,1 kW weight of the machine ca. 1,45 t dimensions of machine L x W x H 1,30 x 0,80 x 2,0 m

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,580 kg, input voltage: 400 V, total length: 1,180 mm, total width: 1,600 mm, total height: 2,310 mm, Special Offer – 5% Discount Available! 40T Open Back Eccentric Press The 40T Open Back Eccentric Press is a professional industrial machine designed for punching, stamping, bending and forming metal components. Its rigid open back frame provides excellent accessibility to the working area while ensuring high stability, precision and operator comfort. The machine features a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems for reliable, efficient and safe operation. Its robust construction makes it suitable for continuous industrial production. Main Features * Open back frame design * Heavy-duty steel construction * Fixed working table * Transversely mounted crankshaft * Dry pneumatic friction clutch * Adjustable slide stroke * Slide balancing device * Integrated safety valves * Manual controls * High productivity * CE certified Technical Specifications * Press force: 40 t * Stroke under nominal load: 6 mm * Slide stroke: 120 mm * Strokes: 55 strokes/min * Maximum die height: 220 mm * Die height adjustment: 80 mm * Throat depth: 260 mm * Working table: 710 × 480 mm * Table thickness: 80 mm * Table hole diameter: Ø180 mm * Bed opening: Ø200 × 150 × 300 mm * Slide surface: 320 × 270 mm * Maximum frame inclination: 25° * Distance between columns: 300 mm * Punch hole diameter: Ø50 mm * Punch hole depth: 70 mm * Motor power: 4 kW Bdjdpfx Aoytdl Aeb Deg * Machine dimensions: 1600 × 1180 × 2310 mm * Machine weight: 3580 kg Standard Equipment * Light curtains * Mechanical safety guards * Lower table ejector * CE Declaration of Conformity * Technical documentation Applications * Punching * Stamping * Bending * Forming * Sheet metal production * Metal fabrication workshops * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: used, Year of construction: 2000, gebraucht Bsdsyrhpvopfx Ab Dsdg 2000 070165A prompt, Zwischenverkauf v Italien 19800 € 1 40 to 2.6 mm 650 mm 380 mm 120 mm 8 - 78 mm 145 1/min 6 60 mm 40 mm 195 mm 297 mm 800 mm 3 kW 1450 mm 1150 mm 2150 mm 2200 kg Two-hand control panel and foot pedal Work area enclosure with safety switch Additional bolster plate Central lubrication system Stroke counter Operating manual with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details: