Used Allrounder 170 Cmd for sale (2,862)

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG Isdsx Rx Eyopfx Addjht

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, warehouse no.: 503615 manufacturer: ARBURG type: Allrounder 375 V 500-170 controller: Selogica-direkt year of construction: 2013 Ihsdsx Ic Dhjpfx Addot operation hours: 36163 h clamping force: 500 kN min. mould height: 200 mm max. mould height: 550 mm max. open daylight: 302 mm opening stroke: 225 mm round table diameter: 900 mm screw diameter: 25 mm swept volume: 59 ccm injection pressure: 2500 bar equipment included: screen text german rotary table Anti vibration mounts measures of machine l x w x h: 2.524m x 1.48m x 3.53m total weight: 3111KG

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Clamping force 850kN Heating 8,31KW Motor 18,5KW Total power 27,2KW Machine cycles 7,112,306 Operating hours 74,900h Interfaces: Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery Iodpfxer Hrqre Addjht

Condition: excellent (used), Year of construction: 1992, Arburg 170 CMD-150-45 Ihedpfx Aox Nwnkoddet Clamping force: 15 tons Year of manufacture: 1992 Tie bar distance: 17x17 cm Screw diameter: approx. 18 mm

Condition: like new (used), Year of construction: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical Specifications Ihedpfx Adexzklqedjt Clamping Unit: Clamping force: 1000 kN – ensures high process stability Rotary table diameter: 1300 mm – optimizes production cycle Usable mold mounting area: 800 × 590 mm Minimum mold height: 300 mm Maximum daylight between platens: 585 mm Injection Unit (3 interchangeable cylinders): Cylinder Ø 30 mm: 83 cm³ at 2200 bar Cylinder Ø 40 mm: 140 cm³ at 1250 bar Cylinder Ø 20 mm: 36 cm³ at 2500 bar Additional equipment: - 2 hydraulic cores – for operating complex molds - 2 pneumatic valves – for additional mold functionalities - GK control – enables direct control of 3 heating zones from the machine - SELOGICA DIRECT control system – precise process control, capability for custom sequence programming Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is fitted with a hydraulic system featuring two energy-efficient variable displacement pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine’s frame, significantly reducing operational noise. Thanks to precision filters and low oil volume, the oil change interval is extended to 20,000 hours. T2 servo-regulation technology includes: - Two adjustable variable delivery pumps - Programmable, adjustable, and stabilized clamping force - Programmable and manually adjustable nozzle contact force - Capability for simultaneous (parallel) movements (nozzle, ejector, cores) The machine is also equipped with: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption by smoothly adjusting pump speed according to machine load (for 15–75 kW motors, 380–480V, 50–60 Hz). Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.

Condition: used, Year of construction: 1985, operating hours: 96,000 h, functionality: fully functional, machine/vehicle number: 134522, Equipment: CE marking, The machine is surplus and may be sold, operational and disconnected. Iodexcakfopfx Addjht

Condition: ready for operation (used), Year of construction: 2017, operating hours: 16,948 h, functionality: fully functional, machine/vehicle number: 239279, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen spacing: 1,100 mm Mould height: min. 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Ejector length: 110 mm Iodpow Su A Nefx Addeht Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Spec. injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm MACHINE DETAILS Electric power heating/motor: 13.6/30 kW Operating hours: 16,948 h EQUIPMENT Handling industrial robot SEPRO Stäubli 6X 160

Condition: ready for operation (used), Year of construction: 2011, operating hours: 41,881 h, functionality: fully functional, machine/vehicle number: 217330, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen distance: 1,100 mm Min. mold height: 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Ejector length: 110 mm Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Specific injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm MACHINE DETAILS Heating power (electric): 13.6 kW Motor power (electric): 30 kW Operating hours: 41,881 h Ihodpfx Asw Suy Ieddet EQUIPMENT Handling unit GEKU SR 500 SH, year of manufacture: 2011 Conveyor belt "16"

Year of construction: 2018, condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Ijdpfx Aor N Rh Hoddjht

Condition: used, Luenette Height without foot 290 mm Foot width 50 mm Iedpfxecrcxtj Addjht Distance 170 mm

Condition: good (used), Technical data for pallet racking beam: Racking system: Bito Type: PRO Scope of delivery includes: 01x pallet racking beam, used Material colour: blue Beam type: PT170S Box profile: 170 x 50 mm Connector: 5 hooks (HK) Clear span: 3,600 mm Max. load per pair of beams: 4,000 kg, with evenly distributed load 02x safety pins, used Version: fully galvanized For securing the beams Against unintended lifting Note: The functionality of the beams is guaranteed despite the holes! The beams originate from a BITO project with heat shields that, according to the manufacturer, were bolted on! Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Ihjdpfex Hwl Rox Addjt Mr. Falk Deutsch General information on the item: This item is only offered for collection. Any transport or shipping beyond this can be arranged at additional costs, which can be quoted individually depending on place of delivery and scope of order.

Condition: excellent (used), Catalogue number 7316 TECHNICAL DATA - Track width: 350mm - Working width of shaft with saws: 355mm - Max. blade diameter: 450mm - Max. cutting height: 170mm - Blade bore diameter: 70mm - Table dimensions: 1850x790mm Top section: - Pawls - 2 smooth, metal sliding shafts - Shaft with saws - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls - Track - Toothed, metal feed shaft - Central lubrication, electric - Stepless feed speed adjustment - Electric lifting of body up/down approx. 1kW - Feed motor: 2.2kW - Main motor: 75kW - Overall dimensions (L/W/H): 2600x1800x1700mm - Weight: 2700kg Ihjdpfx Aox S It Ajddot – Used multi-blade saw – Very good condition Net price: 68,900 PLN Net price: 16,400 EUR depending on 4.2 EUR exchange rate (Prices may vary with larger fluctuations)

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Ijdpfx Ajx N A Dqoddoht

Condition: good (used), Year of construction: 2004, On request and for an additional charge, loading and transport (throughout Europe) can be arranged. All prices include VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Phone: Mobile: (also via WhatsApp) Web: Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? Ihsdpfsxirqqex Addet For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2001, clamping force: 250 kN, screw diameter: 18 mm, displacement volume: 20 cm³, injection pressure: 2,500 bar, injection weight: 18 g, General information Year of manufacture: 2001 Control system: Selogica Weight: 2,000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m Clamping unit Clamping force: 25 t Tool clamping system: 250 / … Plate dimensions: 400 × 400 mm Clearance between tie bars: 220 × 220 mm Ihedpfx Aex Tfuysddet Maximum distance between plates: 425 mm Injection unit Injection unit: … / 60 Screw diameter: 18 mm Screw L/D ratio: 24.5 Specific injection pressure: 2,500 bar Injection volume: 20 ccm Shot weight: 18 g Ejector Ejector force: 18 kN Ejector stroke: 95 mm

Condition: excellent (used), Year of construction: 2000, screw diameter: 40 mm, displacement volume: 188 cm³, injection weight: 172 g, Clamping force: 50 t Year of manufacture: 10/2000 Injection weight: 172 g Injection unit: 250 Screw diameter: 40 mm Specific injection pressure: 1,390 bar Injection volume: 188 ccm Injection weight: 172 g Screw L/D ratio: 17.5 Clamping unit 500 Clamping force: 50 t Tool platen dimensions: 446 x 446 mm Tie bar spacing: 320 x 320 mm Ejector force: 30 kN Ihedpfxex A Afxe Addst Tool height: 200 mm Opening stroke: 350 mm Max. platen distance: 550 mm Ejector stroke: 125 mm Year of manufacture: 10/2000 Control system: Selogica Equipment: - 2 x hydraulic cores

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 199479, clamping force: 250 kN, screw diameter: 30 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 270U 250-170 injection moulding machine. Fitted with a Selogica controller. This machine is the four tie bar variant with good size platens for maximum versatility from a small clamp machine. Isdpfox U Ax Eex Addjht Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team.

Condition: good (used), mileage: 123,347 km, power: 125 kW (169.95 HP), first registration: 02/2023, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 6,750 mm, total width: 2,050 mm, total height: 2,800 mm, loading space length: 4,100 mm, loading space width: 1,750 mm, loading space height: 1,960 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional options and accessories = - Tinted windows - None = Notes = Configuration: 4x2, Payload: 977 kg, Unladen weight: 2,523 kg, Gross weight: 3,500 kg, Trailer load, unbraked: 750 kg, Braked drawbar trailer load: 2,900 kg, Towbar, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Front and rear, Tinted windows, Electric windows, Electric mirrors, Radio/cassette, Colour: White, Service manual, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Lane keeping assist, Bluetooth, Engine power: 125 kW (168 hp), Fuel: Diesel, Euro: 6, Drive system: Timing belt, Transmission: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Roof rack: None, Side doors: 1, Side windows: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seating layout: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, L4H3, 6 seats, air conditioning, camera, park distance control, towbar, spare wheel, Tire type: All-season tires = Further information = General information Number of doors: 1 Registration number: V-30-NTV Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Axle 1: Tire tread left: 6 mm; Tire tread right: 6 mm; Suspension: Coil spring Axle 2: Tire tread left: 6 mm; Tire tread right: 6 mm; Suspension: Leaf spring Weights Unladen weight: 2,523 kg Payload: 977 kg Gross weight: 3,500 kg Functional Loading floor height: 58 cm Maintenance MOT (Periodic Technical Inspection): valid until 02/2026 Ihsdpfx Adex Dhryedjt Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 2 Financial information Lease price: €321 per month (bestelbus, 72 months); Please ask for further information and terms

Condition: used, Cut length Iodpfeyac Aasx Addoht Laser line 400V

Condition: good (used), Year of construction: 2011, Weights Empty weight: 6.950 kg Functional Mast: articulated arm Working height: 1.685 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 970 m Max swing of platform in degrees: 175 Transport dimensions (LxWxH): 6,85x1,75x1,98 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Manitou Model: 170 AETJL Year of build: 2011 Condition: Used Data: Max. working height: 16,85 m Platform height: 14,85 m Max. reach: 9,70 m Platform lifting capacity: 200 kg Platform dimensions LxW: 1,18 x 0,92 m Swivel range: +/- 175° Gradeability: 22% Total dimensions LxWxH: 6,85x 1,75 x 1,98 m Ihjdpfox Tpy Hox Addot Transport position LxH: 5,23 x 2,23 m Movable up to working height: 16,85 m Wheel pressure max.: 38kN Ground clearance: 0,12 m Drive type: Batterie Empty weight: 6.950 kg Special features: Rotating work platform, basket arm swivel angle +/- 70°, white tires Location: 41468 Neuss immediately available

Condition: new, The Basic 170 Super is a versatile metal lathe designed for conventional horizontal lathe applications, making it ideal for various workshops, training facilities, and repair tasks. This robust machine features hardened and ground headstock gears, a maximum spindle speed of 2000 rpm, and an adjustable headstock bearing to accommodate different machining needs. With a turning diameter of 330 mm and a center width of 1,000 mm, the Basic 170 Super provides excellent capability for single part production. Standard equipment includes a 3-axis position indicator, quick change tool holders, chucks, and various accessories to enhance functionality. KNUTH ensures that all guideways are adjustable and the main drive is oil-bath lubricated for durability. For inquiries or to order now, consider the Basic 170 Super for your metal lathe needs. This equipment is a fantastic addition to the Conventional Horizontal Lathe category and fits seamlessly into your metalworking operations. Ihedpjxb R Avefx Addet

Condition: new, The Basic 170 Super PRO is a high-performance Conventional Horizontal Lathe from the renowned brand KNUTH, designed specifically for metalworking applications. Over the years, the Basic series has established itself as a reliable choice for mechanics, featuring a modern ergonomic design and extensive standard equipment to meet the demands of contemporary users in workshops and training centers. This lathe boasts a turning diameter over bed of 354 mm and a center width of 1,000 mm, providing robust construction from high-quality cast iron for maximum stability. With hardened and ground gears for quiet operation, adjustable spindle bearings for precision, and an effective coolant system, the Basic 170 Super PRO ensures long tool life and minimal maintenance. It also features ample storage for accessories and an easy-to-use position indicator for auxiliary functions. For universal applications in repairs, training, and production, you can request a quote for this exceptional Conventional Horizontal Lathe today. Ihsdpfx Aouyhvxeddot

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: AMADA, stroke length: 200 mm, overall weight: 11,600 kg, pressing force: 173 t, This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Voltage: 400 volts • Frequency: 50 hz • Nominal current: 286a • Foreseen power: 165kw Extra Information Machine still under power Ihodpfx Aoyap Rwjddot

Year of construction: 2006, condition: ready for operation (used), This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information. Ihodpfxsyaizps Addjt Machine Benefits Technical Machine Benefits • Clamping force: 800 kn • Distance of the tie bars: 1200 mm / screw diameter: 25 mm / max part weight (g, ps): 45 / core pull: 1 • Configuration: vertical

Year of construction: 2003, condition: ready for operation (used), screw diameter: 45 mm, This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information. Iodpfoyaizijx Addjht