Used Seacom Rt40-100T for sale (298)

Condition: used, maximum load weight: 35,750 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Braking system according to ECE-R13 Electrical system according to ECE-R48 The Kögel superstructure guideline must be observed! It can be accessed at [website address] Frame Chassis frame made of high-quality steel, but without an outer frame Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended), b) 2 x 20' ISO containers (frame extended), c) 1 x 30' ISO container flush at the rear (frame extended), d) 1 x 20' ISO container flush at the rear (frame retracted), e) 1 x 20' ISO container in the middle (frame retracted) 4 pairs of heavy-duty lashing rings Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable, adjustable in length via 1 pneumatic cylinder, low-maintenance guide on special plastic sliders and 2 extension rollers Automatic pneumatic locking of the extension Suspension Axle lift mechanism on axle 1 Control of the axle lift fully automatic, load-dependent Starting aid: activation via 3x brake, 30%, overload up to a speed of 25 km/h Fedpfxjzkx Ifo Anlepk Operation on the chassis via switch, also possible from the driver's cab (switch in the cab required - PIN 12) Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120 Air suspension with approx. 180 mm travel Vehicle tires Tires 6-fold 385/55 R 22.5, 160J 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120) Chassis components Landing gear, mechanical with leveling foot, 24 t lifting capacity, single-sided operation on the right-hand side while driving Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with spray flaps 2 chock blocks with bracket Lateral protection device, according to ECE-R73, closed Underrun protection made of square steel tube according to ECE-R58 with a light carrier arranged above, protected Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection cables), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection Air suspension system incl. 1 raising and lowering valve, mounted on the left-hand side in the direction of travel in front of the axle unit 2 non-interchangeable coupling heads at the front ISO 1728 Air tanks for braking system and air supply made of steel (EN 286-2) Rear impact guard Solid steel rear impact guard on the rear end cross member Electrical system / Electronics Light carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED side marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights 2 LED outline lights with arm, mounted on multi-chamber tail light 2 LED multi-chamber tail lights (without LCG) Plug connection at the front, 15-pole ISO 12098 (without connection cables) Corresponds to vehicle class FL, AT Information systems Kögel Telematics System BasicTrailer incl. location monitoring, coupling status, EBS data The monthly fees are regulated in a separate contract Signage Orange

Condition: used, maximum load weight: 34,250 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt from Equipment List: 09010.001 Braking system in accordance with ECE-R13 09020.001 Electrical system in accordance with ECE-R48 09050.001 The Kögel superstructure guideline must be observed! It can be accessed at [URL removed]. Chassis 10110.020 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch fifth-wheel coupling pin according to DIN 74080 / ISO 337 11110.105 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended) b) 2 x 20' ISO containers (frame extended) c) 1 x 30' ISO container flush at the rear (frame extended) d) 1 x 20' ISO container flush at the rear (frame retracted) e) 1 x 20' ISO container in the middle (frame retracted). 15200.140 4 pairs of heavy-duty lashing rings 27850.030 Rear frame extension, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable. Length adjustable via 1 pneumatic cylinder, low-maintenance guide on special plastic slides and 2 extension rollers. Automatic pneumatic locking of the extension. Suspension I 17160.013 Axle lift mechanism on axle 1 I 17165.113 Axle lift control fully automatic, load-dependent. Start assist: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). I 18330.210 Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120. Air suspension with approx. 180 mm suspension travel. Vehicle Tires 20540.170 Tires 6x 385/55 R 22.5, 160J (manufacturer of our choice) 20865.005 6 steel rims 22.5 x 11.75, offset 120 mm. Chassis Components Fsdpfx Anozkx Hnjlopk 20110.010 Fifth wheel (manufacturer at Kögel's choice) mechanically with equalizing plate, 24 t lifting capacity. Single-sided operation on the right when driving forward. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular mudguards with spray flaps. 21300.001 2 chock blocks with holder I 22070.020 Lateral protective device, according to ECE-R73, closed. 27510.050 Underrun protection made of square steel tube according to ECE-R58 with a lamp carrier arranged above, protected. 27511.010 Height of the underrun protection profile min. 120 mm, designed for increased test loads. Brake / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638, (without connecting lines), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 connection. 33420.070 Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving forward in front of the axle unit. 34320.001 2 non-interchangeable coupling heads in front ISO 1728 34410.010 Air reservoirs for the brake system and air supply made of steel (EN 286-2). Rear Impact Guard 42551.040 Solid steel rear impact guard at the rear end beam. Electrical / Electronics 60500.021 Lamp carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED position lights and reflectors in front - flashing LED side marker lights - Superseal and bayonet connectors for the lights I 61500.110 2 LED outline lights with arm, mounted on multi-chamber tail light I 61910.120 2 LED multi-chamber lights

Condition: good (used), Year of construction: 2006, ECKOLD - Eckold PFW100T Doming tool for MAX. 4 mm Eckold PFW100T Doming tool for MAX. 4 mm Fpodpozdgclsfx Anlok Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Ifsys Type: 114100 Type: VL 13 Servo press Hopper system with 2 x Vibroliner and 2 x Vibrohopper 1 x return conveyor belt 2 x control unit FC 1000 Condition: used Fpedpfx Anozd Rk Ejlok Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Ifsys Type: 114100, Type: VL 13 Screw feeding system Hopper system with 2x Vibroliner and 2x Vibrohopper 1x Return conveyor 2x Control unit FC 1000 Condition: used Scope of delivery: (See image) Fodpfxozdp Ice Anljpk (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1998, pressing force: 100 t, For sale is a used die-setting press from the manufacturer REIS with a maximum pressing force of 100 tons. The machine has a table size of 1,100 × 800 mm, a maximum installation height of 950 mm, and numerous features, including an ejector in the table, oil connection boxes for core pulls, and a 180° pivoting ram plate. It is therefore particularly suitable for die-setting operations, tool try-out, and testing in mold and tool making. ##### Technical Data + Information: Die-setting press – 100 tons – 1,100 × 800 mm ==== General Information - Design: 4-column die-setting press - Manufacturer: REIS - Type: TUS 80–100 - Year of construction: 1998 - Pressing force: 26–100 tons (adjustable) - Retraction force max.: 45 tons - Table size: 1,100 × 800 mm Fsdpfsxd Tiqex Anljpk - Max. table load: 5,000 kg - Installation height max.: 950 mm - Overall dimensions (W x D x H): approx. 2,100 × 3,395 × 3,670 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm ==== Hydraulic Cylinder - Pressing force range: 26–100 tons - Retraction force: 45 tons ==== Hydraulics & Drive - Hydraulic pump: REXROTH SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Working pressure max.: 200 bar - Pressure accuracy: ±5 bar - Tank volume: 200 l - Hydraulic oil: HLP 36 ==== Motion System - 180° pivoting ram plate - Load capacity of the pivoted ram plate: up to 3 tons - Ejector in the ram: 3.5 tons - Ejector stroke: 130 mm - Extendable table - Table can be tilted to both sides - Movable ejector in the table - Oil connection boxes for core pulls - Injection molding filling device in the ram - Quick clamping plate on the ram ==== Control - Operation via control panel - Press force setting - Operation of core pulls - Control: Siemens / Pilz - Digital measuring device ==== Safety - Industrial machine control - Operator panel with safety functions ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 7.5 kW - Total connection power: 10 kW ##### Application areas: Die-setting, tool try-out, mold making, tool making, injection molding tools, automotive, prototype construction, trial tools, maintenance, production preparation (Die-setting press, try-out press, tool try-out press, hydraulic press, REIS TUS 100, 100 ton press, 4-column press, testing press, mold making press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety standard NR 12, which is based on these. Our core strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: used, functionality: fully functional, power: 110 kW (149.56 HP), working height: 160 mm, EWD (Esterer WD GmbH) Type: Combimes BK100 TL-2 (3 movable flanges) Year of manufacture: 1990, Mechanization 2006 3 movable flanges Cutting height: 160 mm Wood lengths up to 7 m The EWD Combimes BK100 TL-2 is an automatic edging line for the economical processing of boards and planks in sawmill operations. The machine features a pneumatic air measurement system to detect the workpiece contour and automatically determines the optimal cutting line to maximize wood yield. The workpieces are automatically measured and fed to the adjustable circular saw units. The robust steel construction, precise feed, and automatic cut optimization ensure high dimensional accuracy and reliable continuous operation. Technical data * Manufacturer: EWD * Model: Combimes BK100 TL-2 * Machine type: Automatic edging and resawing line * Year of manufacture: 1990 * Application area: Edging and resawing of boards and planks * Measuring system: Pneumatic air measurement * Workpiece alignment: Automatic alignment according to the optimal cutting line * Cut optimization: Automatic determination of the most economical edging * Saw units: Servo-hydraulically adjustable circular saw units * Feed: Automatic, frequency-controlled feed * Control: EWD optimization control * Machine frame: Welded steel construction for industrial continuous operation Processing data * Workpiece length: approx. 1,200–6,000 mm Fpodpfx Ajzp Ezconlok * Workpiece width: approx. 80–700 mm * Workpiece thickness: up to approx. 160 mm * Max. feed speed: up to approx. 210 m/min * Main motor: 110 KW * Performance: up to 22 workpieces/min (depending on workpiece dimensions and system configuration)

Condition: ready for operation (used), Keyence CA-E100T Vision System SN:BA710081, used, in good condition, 100% fully functional, scope of delivery as per photos Fodpfxjx Et Acj Anljpk

Condition: ready for operation (used), Keyence CA-E100T Vision System SN:BA710085, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Fpodpfxex Et Aio Anljk

Condition: used, Kompleksowo przetestowany, używany mieszalnik lemieszowy produkcji Winkworth (Anglia) model RT400 wykonany ze stali kwasoodpornej AISI 316. Materiał: stal kwasoodpornej AISI 316 Pojemność robocza: 400 litrów (w zależności od produktu) Wymiary komory mieszającej: długość 1300 mm x średnica 800 mm Typ rozładunku: zawór klapowy pneumatyczny, umieszczony centralnie na spodzie Mieszadło: szybkoobrotowy wał z przyspawanymi łopatami w kształcie "T" Silnik: napęd produkcji SEW z silnikiem elektrycznym o mocy 22 kW Dodatkowe wyposażenie: - 1 boczne mieszadło intensywne (chopper - Refiner) napędzane bezpośrednio silnikiem elektrycznym o mocy 7,5 kW, możliwość podłączenia drugiego mieszadła Poniżej dostępny jest link do filmu ukazujący mieszalnik podczas testowego uruchomienia: Fsdpfxoykn Sho Anlepk Specifications: Bowl Volume: 105.7 gal Motor Power: 22 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 10.057 Vacuum Internal (Y/N): N Jacket (Y/N): N Dimensions: 1300mm Long x 800mm Diameter

Condition: used, Year of construction: 1997, Press Brake HACO type PPM 36100 Command: ATL 550 Capacity: 3150 mm x 100 T Electric Back gear gauge travel: 800 mm Slide travel: 120 mm Year of construction: 1997 Throat depth: 250 mm Distance between uprights: 3150 mm Working Length: 3600 mm Motor power: 5,5 kW Voltage: 380 V Equipped with 2 multi V 90 x 90 mm - length 3660 mm Fpodpfszku Dvox Anlsk + some tools (see photo) Dimensions (L x W x H): 3900 x 1600 x 2300 mm Weight: approx 8 T

Condition: used, machine/vehicle number: 39500, empty load weight: 8,250 kg, maximum load weight: 31,750 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 05/1995, loading space length: 9,480 mm, total length: 1,160 mm, total width: 2,500 mm, total height: 2,950 mm, tire size: 235/75 r17,5 zwilling, color: orange, # Müller Mitteltal 4-Axle Low Loader Trailer ## Chassis & Frame Construction * Main frame and outer frame made of high-strength double-T profiles (steel grade ST 52.3) * Four longitudinally profiled frame sections * Reinforced front and rear end sections with high web profiles and cross members * Frame behind the turntable passage with smooth offset gooseneck design and rear loading incline approx. 0.8 m long * Lowest possible loading height thanks to recessed wheel wells above the rear axles * Front corners of the turntable platform bevelled at 45° * 2 recessed UVV-compliant lashing rings each on the turntable platform and loading incline for securing equipment * Rear end with wide bearings for a six-point supported ramp shaft * Side underrun protection with protective rail according to EC regulations * Wheel chocks with clamping safety device --- ## Axles & Braking System * Low-maintenance tapered roller bearing axles * Automatic slack adjusters * Dual-line compressed air braking system according to EC regulations * Parking brake system --- ## Turntable & Drawbar * Turntable and drawbar constructed from welded double-T profiles * Heavy-duty ball-bearing steering connection * Standard drawbar length: approx. 1,500 mm * Certified 50 mm towing eye * Drawbar support with threaded spindle height adjustment * No axle compensation system --- ## Electrical System * 24 V electrical system * 2 × 7-pin non-interchangeable connecting cables * Large rectangular four-chamber rear lights including: * Rear fog light * Reversing lights * Front distribution box * Rear outline marker lights * Side marker reflectors/lights * Holder for single-line licence plate --- ## Loading Platform & Flooring * Underfloor construction made of pressure-treated pine wood, approx. 40 mm thick * Low-loader platform and loading incline with cross-laid upper timber decking, approx. 30 mm thick * Total floor thickness: approx. 70 mm * Turntable platform with longitudinal single-layer timber flooring * Recessed open equipment storage box: * Length: 700 mm * Width: 800 mm * Depth: 180 mm --- ## Loading Ramps * Welded steel ramp construction with trough-shaped sheet metal design and cross members * Longitudinal timber decking, approx. 50 mm thick * Reinforced ramp tips * Ramp securing system with tension lock and safety mechanism * Ramps laterally adjustable by 470 mm on each side * Adjustment via perforated rail and sliding tube system * Ramp shaft made of bright steel * Jointed arm spring lifting mechanism with external and internal springs for easy one-person operation * Automatic ground supports --- ## Surface Treatment & Paint Finish * Shot-blasted steel structure * Zinc phosphate primer * Single-colour acrylic paint finish in RAL colours * Wheels painted silver * Available in: * Standard colours * Light colours Fpedpsi Rixgsfx Anljk * Metallic colours * Two-tone paint finishes * Timber surfaces stained and protected --- Müller Mitteltal 4-Axle Low Loader Trailer – Heavy-duty construction for professional transport applications.

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Fedpjxzf Dzefx Anlepk Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, distance between stands: 2,550 mm, control type: CNC control, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Approch speed 200 mm/min. Working speed 10 mm/min. Fodpfxexyw Sbe Anlepk Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Control TS1 Crowning Yes Hydraulic toolclamping Yes Power 7.5 kW

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 40 t, table length: 1,030 mm, Equipment: CE marking, documentation/manual, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Make: Bystronic Model: Xpert 40/1030 Tonnage 400 kn / 40ton Back gauge: 6axis back gauge Fpodpfx Anoy D Smwsljk Bending length 1030 mm / 1metre Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm Xpert 40/1030 ByVision Bending control with 22 Inch Full HD display and touch technology

Condition: good (used), Year of construction: 2021, Eurodifroid RFI 100 Water Chiller The Eurodifroid RFI 100 water chiller is designed for the professional, constant cooling of water or glycol in industrial and research settings. Typical applications include cooling CNC machines, laser systems, laboratory test rigs, or process engineering systems (e.g., in the hydrogen/fuel cell sector) where precise medium temperature control (rated here for 20°C) is essential. Typical Areas of Application Machine and tool cooling: Precise temperature control for test rigs, analytical instruments, or reactors in research institutes. Renewable energies / Process engineering: Cooling of mixing vessels or production systems where precise temperatures are required. Technical Data: Manufacturer: Eurodifroid (France) Model / Type: RFI100THIECHV3VIP [SYLFEN] Product Type: Industrial water cooler / chiller / cooling unit Cooling capacity: 7,000 watts (7 kW) at 20°C outlet / 32°C ambient Operating voltage: 400 V / 3-phase / 50 Hz Power consumption: 5,140 W (5.14 kW) Rated current / Starting current: 9.9 A / 51.8 A Required fuse protection: 12 A Refrigerant: R513A (charge: 2.65 kg) Tank volume: 100 liters (2x 50 L) Pump flow rate: 3 – 50 l/min Pump pressure: 0.2 – 3.7 bar Max. pressure (HP / LP): 30 bar / 19 bar Operating range (ambient): -10°C to +50°C Noise level: 69 dBA Year of manufacture: 03/2021 Weight: 295 kg Fedozcm Hzepfx Anlspk You can find more items—new and used—in our shop! International shipping costs available upon request!

Condition: used, machine/vehicle number: 0380, Year of construction: 2014, operating hours: 4,600 h, load capacity: 4,500 kg, lifting height: 21,000 mm, overall weight: 15,500 kg, enginetype: Diesel, manufacturer: Merlo Fpodpfxsztx Eco Anlsk

Condition: used, Battenfeld plasticising screw Ø 18 mm- as good as new Fpjdpfx Aju Tv A Denljk - removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalinlet: 17,80 mm centre: 17,80 mm outlet: 17,80 mm stroke volume: 22.9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm spare part no.: 100TM842 Dition: neuwertig

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Fpodpfxezghf Ej Anlok

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 49,641 h, stroke length: 200 mm, oil tank capacity: 100 l, travel distance X-axis: 300 mm, controller manufacturer: Bystronic, working width: 60 mm, bending force (max.): 40 t, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 955 mm, control type: CNC control, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, finger protection, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Model: Xpert 40/1030 Fpodpfxoxtf A Ij Anlsk Tonnage 400 kn Bending length 1030 mm Standard stroke [S] 200 mm Open height [D] 515mm Distance between side frames 1060mm Table Width 60mm Max. back gauge range X-axis 500mm X-axis travel 300 mm X-axis speed 1500 mm/s R-axis travel 100 mm R-axis speed 500 mm/s Z-axis travel 955 mm Z-axis speed 2000 mm/s Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm 1.1 Xpert 40/1030 1.2 ByVision Bending control with 22 Inch Full HD display and touch technology 1.3 Dynamic drive system (DDS) with Energy Saver 1.4 Automatic tool protection 1.5 Ergo foot switch 1.6 Rear protection sliding door electrically controlled 1.7 User manual (on CD) 1.8 Ambient air temperature 7°C up to 35°C 1.9 Voltage: 400/480 V, 50/60 cycles, 3 Ph (other parameters available on request)

Condition: used, axle configuration: 3 axles, first registration: 08/2016, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, color: white, Year of construction: 2016, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, * Thermo King SLXe 100 deep-freeze box Fpjdowxmfqepfx Anljk * Refrigeration performance down to -20°C * Refrigerated box dimensions: Length 7,300 mm - Width 2,500 mm - Height 2,700 mm * Electric operation * Folding doors on the left * Rear portal doors, 270° * BPW axles * 3 axles * Load securing rails right and left * 2nd axle liftable * Perm. total weight 24,000 kg * Unladen weight 8,240 kg * Payload 15,760 kg * Also available as a complete truck and trailer combination: Mercedes Actros 2663 + €74,950 If a new TÜV inspection is required, we will be happy to provide a quote through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend that you view and inspect the item to avoid any misconceptions regarding its condition and suitability on the buyer's side. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not assume liability for errors or incorrect information in the offer. The buyer is required to independently verify the condition and equipment of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: used, Technical details: table length: 4000 mm table width: 4000 mm table load: 100 t table adjustment - longitudinal: U-Achse: 2000 mm table rotating: B-Achse: 360 ° rapid traverse longitudinal: U-Achse: 6000 mm/min mm/min. rapid traverse:: B-Achse: 0,05 - 2 U/min U/min Rotary table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support : Hydrostatic support. Ø of the fifth wheel : 2.190 mm Hydraulic locks - 3 hydrostatic guideways for longitudinal movement - 1 hydrostatic circular guideway for the rotation axis Positioning system: - Heidenhain angle encoder for the B axis - Heidenhain optical scale for the U axis The servo motors, the control cabinet and a panel are not included in the scope of delivery. Fedpfxju N D Tls Anljpk *

Condition: used, Year of construction: 2014, Technical details: length: 8.000 mm width: 1.600 mm height over floor: 980 mm Payload: 40 t axle distance: 980 track width: 550 mm weight: 9,5 t Fpedpfju Nv Tqex Anlsk dimensions L x W x H: 13,3 x 2,5 x 2,65 m - Application for tractors - with corner supports - Trailer drawbar: length 1,300 mm; support height 1,400 mm; crank 600 mm; fastening with adjustment bolt Ø 72 x 90 mm - with solid rubber tires (2x double wheel rocker with 4 wheels) - technically possible driving speed 6 km/h i.D. *

Condition: used, Year of construction: 2005, functionality: fully functional, Spotting Press – Manufacturer: Reis – TUS 130-100 – 26–100 t Spotting Press – Table 1,600 × 1,300 mm For sale is a spotting press from manufacturer Reis, model TUS 130-100, with an adjustable pressing force from 26 to 100 t. This machine features a spacious table area of 1,600 × 1,300 mm, a daylight opening of 1,700 mm, as well as extensive features such as a tilting ram plate and integrated ejector. It is especially suitable for spotting, adjustment, and tryout work in tool and mould making. ===== Technical Data & Information: Spotting Press Reis TUS 130-100 – 26–100 t ==== General Information - Manufacturer: Reis - Model: TUS 130-100 - Drive Type: 4-column spotting press - Pressing force: 26 – 100 t (adjustable) - Machine weight: approx. 17,000 kg - Dimensions (W × D × H): 4,900 × 2,800 × 5,500 mm Fodpfjxd Tv Dox Anlepk ==== Working Area - Maximum daylight: 1,700 mm ==== Table and Ram - Table size: 1,600 × 1,300 mm - Max. table load: 12,000 kg - T-slots: DIN 650 – 22 mm ==== Forces - Retraction force: max. 45 t ==== Hydraulics - Hydraulic pump: Rexroth SYDFE2x/071R-PPA.. - Motor power: 15 kW - Operating pressure: max. 200 bar - Pressure accuracy: ± 5 bar - Oil tank volume: approx. 475 l - Hydraulic oil: HLP 36 ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 15 kW - Total connected load: approx. 21 kW ==== Control System - Siemens Simatic S7-634 - Operation via control panel - Functions: - Ram up / down - Ram tilting - Table traverse - Ejector control - Adjustable press force ==== Features - Tiltable ram plate: 180° (up to 7.5 t tilted) - Ejector in ram: 5.6 t / 160 mm stroke - Stroke extension: +300 mm - Increased speed feature ==== Documentation - Hydraulic schematic - Electrical schematic - Technical drawings - Data sheet ===== Spotting, tool tryout, tool adjustment, mould making, tool making, tryout processes Spotting press, tool tryout press, tryout press, tool adjustment press, tool tryout press, sample press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are designed and manufactured according to the German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply in all points with the Brazilian national safety guideline NR 12, which builds on these requirements. Our greatest strength is special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. The hydraulics are predominantly equipped with components from leading European manufacturers.

Condition: used, empty load weight: 3,300 kg, maximum load weight: 15,700 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 07/2014, next inspection (TÜV): 04/2025, suspension: air, tire size: 235/75R17.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, air suspension, ABS (anti-lock braking system), U-protection, front support, rear support, side aluminum undercarriage, twin tires Fjdpfx Aneu Uur Heljpk Construction: Tandem BDF trailer BPW axles, drum brakes! Swap body -9298- and others available for 2,000 to 9,000 EUR! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .