Press brake

Bystronic Xpert 40/1030

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, working width: 1,030 mm, stroke length: 200 mm, overall weight: 4,000 kg, Hydraulic Press Brake Make: BYSTRONIC Model: Xpert 40 Year of Manufacture: 2017 Technical Specifications Bsdpfx Abeyficdjpjlc Manufacturer: BYSTRONIC Operating hours: approx. 9,500 h Model: Xpert 40 Year: 2017 Press capacity: 40 t Bending length: 1,030 mm Stroke: 200 mm Distance between frames: 1,060 mm Motor power: 7.5 kW Weight: 4 t Dimensions: L 1.52 x W 1.60 x H 2.45 m Equipment • 6-axis backgauge • Hydraulic clamping top & bottom • RF-A tool holder, top • Height-adjustable ByVision Bending display with 22-inch Full HD touchscreen • Support table • Ergo LED work area lighting • Low-noise Dynamic Drive System (DDS) with integrated EnergySaver • OPC Interface Bending • Bend curve generator • Automatic tooling overload protection • Oil cooler • Ergo foot switch • Rear sliding door with electrical monitoring All details without obligation. A powered demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Bledpet Iklkofx Abpsc Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 7,724 h, machine/vehicle number: 19500015 + 508267, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Bystronic, controller model: ByVision, bending force (max.): 40 t, working width: 1,030 mm, stroke length: 200 mm, distance between stands: 1,060 mm, installation height: 515 mm, operating speed: 1,500 mm/s, oil tank capacity: 100 l, travel distance X-axis: 300 mm, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 955 mm, overall weight: 4,000 kg, total length: 3,250 mm, total width: 2,800 mm, total height: 2,500 mm, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, Equipment: emergency stop, finger protection, foot remote control, safety light barrier, For sale is an automated press brake with integrated robotic system from first owner, designed for serial sheet metal forming. Press Brake 2019 BYSTRONIC Xpert 40/1030 Robot 2019 KUKA KR10R 1100 sixx Technical Data Press Brake - Press force: 400 kN (40 t) - Working length: 1030 mm - Control system: ByVision Robot - Max. rated payload: 11 kg - Reach: 1100 mm - Axes: 6-axis - Repeatability: 0.02 mm - CE-certified safety modules Features - Fully automated bending cell with integrated 6-axis industrial robot - Single ownership - Installation dimensions (LxWxH): approx. 3.25 m x 2.8 m x 2.5 m - ByVision Bending operator terminal with 22" Full HD touchscreen Machine Condition - Operating hours: 7,724 h - Cycle counter: 310,212 - Complete service history, regular inspections - Technically in perfect condition - Functional test: can be demonstrated during inspection - Location: Niederrohrdorf, Switzerland Terms - New price: CHF 250,000 (2019) - Selling price: CHF 150,000 (negotiable) - Dismantling, collection, transport: by buyer - Availability: immediate / by arrangement - Payment: advance payment / bank transfer - Warranty: The system is sold as seen and inspected, with exclusion of any liability for material defects. No warranty or guarantee provided. Seller accepts no further liability. Bodpfxex El Nhs Abpolc

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 28,300 h, machine/vehicle number: 16500126, Press force: 400 kN Total bending length: 1030 mm Standard stroke [S]: 200 mm Clearance [D]: 515 mm Distance between columns: 1060 mm Table width: 60 mm X-axis backgauge travel range: 500 mm X-axis travel: 300 mm X-axis travel speed: 1500 mm/s R-axis travel: 100 mm R-axis travel speed: 500 mm/s Z-axis travel: 955 mm Z-axis approach speed: 2000 mm/s Y-axis approach speed: 300 mm/s Maximum Y-axis bending speed: 25 mm/s Y-axis positioning accuracy: 0.004 mm Oil capacity: 100 l Main drive power: 7.5 kW Weight: 4 t Length, approx. [L]: 1520 mm Width, approx. [W]: 1584 mm Height without increased clearance and stroke, approx. [H]: 2449 mm 1. Intelligent control system and drive with an exceptionally low noise emission (below 75 dB) in the Xpert 40 enables part production with about 30% lower energy consumption compared to conventional electrically-driven machines. 2. ByVision software with a 22-inch LCD display and touch technology 3. Intelligent process control guidance with Energy Saver 4. Automatic tool protection system 5. Foot pedal 6. Electrically operated protective sliding doors 7. User manual on CD 8. Ambient temperature from 7°C to 35°C 9. Voltage: 400 V, 50 Hz, 3 Ph 10. 'Bend G2' – optical safety system with manual height adjustment 11. 6-axis backgauge (3 additional axes) 12. 3-backgauge set - Xpert 40 (N0002.0040.000) - Set for integrating a third backgauge in the press brake 13. Ergonomic LED lighting package - Light output: 1500 lux 14. Ergonomic front supports with table. Max. load is 35 kg. 15. 'At your fingertips' tool cabinet - accommodates 3m of tools within easy reach (1 set of punches and 2 sets of dies). 16. Optical bending guidance system – the operator is guided throughout the bending process by the optical guiding system. Blodpjwv N Naefx Abpsc 17. Ergo Bending Line Laser – Bystronic Bending Line Laser serves as a visual assistance for the operator by projecting a bending line on the material surface. The operator is supported by a virtual bending line when the backgauge fingers cannot be used (fully or partially). The laser line can be set at different heights depending on the die height (e.g., 55 / 100 mm), depending on material thickness or workpiece size. 18. Productive XPT clamping package (WILA NSCL II upper tool clamp and T12/90 table) 19. WILA hydraulic clamping package includes both upper and lower tool clamping with T12/90 table. 20. WILA NSCL II/XPT upper tool clamping (Productive clamping pack XPT) – XPT-type (Wila) upper tool clamping allows tool mounting in 0 and 180° orientations. 21. T12/90 table (Productive XPT clamping package) – T12/90 table with a height of 90 mm and width of 72 mm offers extensive space for Z-bends. The machine is fully operational. In continuous use. Viewing and testing of the machine are welcome.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. Bsdpfxel Dw D Es Abpslc The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 4,000 mm, overall weight: 820 kg, load capacity: 500 kg, The offer concerns the following set: (possibility to adjust device parameters or to purchase the vacuum lifter or jib crane separately) - Vacuum lifter for boards, suitable for handling MDF, laminated boards, raw boards, particle boards, etc. (model WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for handling boards - Actuator for rotation between vertical and horizontal positions - 6 suction cups Ø 200 mm - Frame allows for adjustment of suction cup positioning to match the material being handled - Beam length: 2500 mm - Each suction cup is equipped with a ball valve for individual deactivation - Integrated air pulse function to prevent material adhesion - Individual X and Y axis adjustment for each suction cup - Control from the operating console (control panel): - Power on/off for the generator - Vacuum engagement/release - Thumb-operated control of the electric hoist – raising/lowering the lifter - Pressure gauge - Pneumatic supply – equipped with vacuum generators - Lifting capacity: 400 kg - Device weight: 100 kg - CE certificate Stationary jib crane Technical data: • Column height: 4 m • Height under the jib: 3 m • Jib length: 4 m • Lifting capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: approx. 3 m/min • Colour: any RAL palette colour on request • Manual slewing • Manual trolley • Quadruple/double needle bearing on the jib arm for smooth rotation • Electric chain hoist Blodpfx Asxln Drebpsc • CE certificate INCLUDED IN THE PRICE: • Pillar jib crane • Electric hoist – single phase • Manual trolley • CE certification • Complete documentation Standard warranty: 12 months

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Blodpjhigmbsfx Abpjc Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Year of construction: 2010, condition: ready for operation (used), A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible. Blodpfx Ajxv A E Sebpjc

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Purification System. -Material Compatibility. Mild Steel, Aluminum, and Stainless Steel. -Working Thickness Range: Bedpfx Abshq A T Ujpelc Accommodates material thicknesses from 0 to 120 mm. -Edge Rounding Provides Radius 2 edge rounding for smooth, safe edges that enhance both the appearance and functionality of the workpiece. -Precision Control: Equipped with a Siemens automation system for accurate and consistent control throughout the entire process. Independent Stations: Multiple processing stations enable versatile operations, allowing different tasks to be performed simultaneously or sequentially Table Options: Available working table sizes of 650 mm, 1000 mm, or 1300 mm to meet specific production requirements Table Types: Flexible configurations including magnetic, vacuum, or magnetic-vacuum tables ensure secure support for various materials and part sizes. Plasma and Oxygen Technology: Utilizes advanced plasma and oxygen technology to effectively remove heavy burrs and dross after cutting, delivering cleaner and smoother surfaces Surface Purification: Efficiently removes surface contaminants such as rust, oxide, and scale, preparing parts for further processing Edge Rounding for Coating: Prepares parts perfectly for painting and coating by ensuring a uniform, imperfection-free surface Industry Applications: Ideal for Steel Service Centers, Energy, Mining, Construction, and Automotive sectors, offering tailored solutions for heavy-duty applications. Uniform Results: Six flap wheels operate in unison to provide consistent, equal radius edges on every part. Pneumatic Oscillation System: Extends the lifespan of emery bands by minimizing wear and maintaining consistent performance over time.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° Bledpfx Abstwliwopec 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!