Used Solar Taurus 65 for sale (7,696)

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm Ksdpfx Ajy Ralnoqqjdr control FANUC Series 31i-Model A total power requirement 23 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 2.880 x 2.130 x 1.990 mm m

Condition: good (used), Year of construction: 2001, functionality: fully functional, Manufacturer: Fasti GmbH Type: ERD 65 B Rated power: 0.9 kW PRICE REDUCTION FROM 700 TO 550 EUR!!! Kdedpfsvzwrbjx Aqqjr

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2027, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,670 mm, Year of construction: 2020, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Reisch 65 cbm Sliding Floor Trailer (Vehicle 674) First registered: 06/03/2020 Type: RSBS-3-10/C3V Permissible gross vehicle weight: 39,000 kg Unladen weight: 6,000 kg Payload: 33,000 kg Overall length: 11,000 mm Overall width: 2,550 mm Overall height: 3,670 mm Load volume: approx. 65 cbm TÜV (technical inspection) valid until: 06/2027, main inspection valid until: 12/2026 Roll-up tarpaulin, platform Kedpfozful Nex Aqqsdr Clean floor, end pieces, sides, reinforced rear walls Portal doors 1/2 and 1/2 at the rear, grain sliding hatch Remote control Cargo floor LED work lights + reversing lights 2 x 12-tonne, 2-speed geared winch Shovel and broom holder on the driver’s side, front Storage box, plastic, driver’s side, center Air suspension with raising and lowering function 1st lift BPW drum brakes Tires: 385/65R22.5, 1st tire approx. 70/80%, 2nd tire approx. 80/90%, 3rd tire approx. 60/60% ALCOA aluminum rims Extension ladder on the passenger side, rear Ladder behind the fifth wheel Half-shell fenders Price: €23,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typographical errors, and prior sale.

Condition: used, mileage: 478,000 km, power: 353 kW (479.95 HP), first registration: 07/2007, fuel type: diesel, number of seats: 8, gearing type: automatic, emission class: euro4, color: blue, brakes: retarder, Year of construction: 2007, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), onboard kitchen, parking heater, soot filter, Starliner 2 with motorhome conversion / conference bus. C or D driving license required. Length: 11.98 meters – the only Starliner 2 with this length. Height: 3970 mm. Unladen weight: 17 tons. Permissible total weight derated to 19,000 kg. 8 seats including driver - Solar system: 14 modules of 155 W each = 2.17 KWp - Standalone air conditioning / auxiliary heating - 4 x 200 Ah batteries - 2 solar charge controllers of 100 A each - 4000 Watt inverter - 70 A battery charger - 2 x 30 A bi-directional chargers - Diesel generator 480 HP MAN, ZF AS Tronic 12-speed Kedpszvxm Esfx Aqqedr Net export possible

Condition: good (used), Year of construction: 1997, Manufacturer: TRAUB Model: TNC 42/65 DGY Machine Type: CNC turning center / CNC twin-spindle lathe Year of Manufacture: 1997 Control System: TRAUB System TX 8F Condition: Used Technical Data Max. bar diameter: 65 mm Max. turning diameter: approx. 175 mm Max. turning length: approx. 450 mm Max. spindle speed: approx. 4,000 rpm Main spindle power: approx. 18.5 kW Counter spindle power: approx. 11 kW Spindles Main spindle Counter spindle C-axis 2 CNC tool turrets Each with 10 tool stations Kjdpszkk Htofx Aqqjdr Powered tool stations Travel and feed rates Travel in X-axis: approx. 140 mm Travel in Z-axis: approx. 450 mm Travel in Y-axis: approx. ±35 mm Rapid traverse X-axis: approx. 15 m/min Rapid traverse Z-axis: approx. 30 m/min Rapid traverse Y-axis: approx. 6 m/min Bar feeder Manufacturer: TRAUB / STAMAG Model: DN 61 Machine Dimensions Machine dimensions: approx. 4,150 × 2,000 × 1,800 mm Machine weight: approx. 4,750 kg

Condition: good (used), Year of construction: 2019, operating hours: 1,500 h, functionality: fully functional, total length: 2,420 mm, total height: 1,650 mm, total width: 13,600 mm, type of input current: three-phase, product height (max.): 250 mm, product width (max.): 630 mm, input voltage: 400 V, overall weight: 710 kg, power: 29 kW (39.43 HP), Ulma shrink tunnel. Only used as a replacement machine. Very good condition. Speed: 3 - 14.5 m/min | Double heating chamber | Dimensions: 2,420 x 1,360 x 1.650 mm | Weight: 710 kg | AIR FLOW CONTROL THROUGH FREQUENCY CONVERTER AND SOLID STATE RELAY | SHRINK TUNNEL PRECHAMBER AT INLET AND OUTLET | 220 MM HIGH CHAMBER | LEFT VERSION, PRODUCT RUNS FROM RIGHT TO LEFT | SELECTION FOR PURE "TRANSPORT MODE". Hot air fixation tunnel, an ULMA shrink tunnel model designed for shrinking film around previously packaged products. (Products previously packaged in side sealers, banding machines, flow wrappers, overlapping machines or any other packaging machine). Tunnel with high heating capacity, low consumption and low heat loss. Solid painted tubular steel frame. Easy integration into existing lines. Height-adjustable machine feet and wheels for installation and transportation. Product flow of the machine from right to left. Movable rollers with silicone coating. Electronic temperature control. Control of the transport speed. Air is evenly distributed inside the chamber, guaranteeing great energy savings. Kodpetva Sgofx Aqqodr Maximum insulation to reduce heat loss. Electric cabinet with ventilation. Protective devices and safety systems in accordance with CE standards. Consumption: 14.5 KW/h

Condition: used, Year of construction: 2011, Technical details: Kdodsyz Sdqjpfx Aqqsr weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: new, functionality: fully functional, power: 435 kW (591.43 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 6,471 kg, operation weight: 6,471 kg, tire size: 7.50x15 dubbele banden, tire condition: 100 %, drive condition: 100 %, number of seats: 1, emission class: euro5, shovel volume: 0.2 m³, Year of construction: 2025, operating hours: 48 h, Equipment: additional headlights, adjustable boom, air conditioning, all wheel drive, gripper hydraulics, hydraulics, low noise, onboard computer, soot filter, === KEY SPECIFICATIONS === Year: 2025 Hours: 48 h Operating weight: 6,471 kg Maximum digging depth: 3,795 mm Maximum digging reach: 6,445 mm Bucket capacity: 0.20 m³ Engine: Perkins 404F-E22TA Engine power: 43.5 kW Maximum travel speed: 30 km/h Tyres: Michelin XMCL 12.5/80-18 pneumatic tyres CE certification: Yes === EQUIPMENT & FEATURES === Triple boom Dozer blade Four auxiliary hydraulic circuits Auxiliary hydraulic flow: 144 l/min Overload valve for auxiliary hydraulics PowerTilt pilot circuit Easy Lock preparation Automatic climate control Enclosed heated cabin Electrical refuelling pump Road homologation kit Radio Flashing beacon Air-suspended seat Front and rear working lights Dual tyres: 7.50x15 === CONDITION === New and unused machine with only 48 operating hours. The machine is in new condition, with 100% remaining tyre tread. Inspection and operational testing are possible by appointment. === DESCRIPTION === New 2025 Wacker Neuson EW 65 wheeled excavator with only 48 operating hours. Equipped with a Perkins Stage V diesel engine, triple boom, four auxiliary hydraulic circuits, automatic climate control and Easy Lock preparation. Its compact dimensions and maximum travel speed of 30 km/h make it suitable for construction, infrastructure and urban excavation work. === PRICE, LOCATION & DELIVERY === Ksdpfx Aqezp Dvljqjdr Price: On request Location: Sittard, the Netherlands Delivery terms: EXW Worldwide transport can be arranged by Collé Rental & Sales.

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without sacrificing pressing power. Ksdpfszuxqhjx Aqqedr

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc. Ksdpfx Aezfkbaeqqodr

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, spindle speed (max.): 5,000 rpm, travel distance X-axis: 180 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 704 mm, controller model: FANUC SERIES 31 i-MODEL A, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. Kjdpfx Aqjym Ai Hsqedr TECHNICAL DETAILS TRAVEL DISTANCES X1-axis: 180 mm X2-axis: 180 mm Y1-axis: ±45 mm Z1-axis: 704 mm Z2-axis: 620 mm E2-axis: 720 mm Rapid traverse X/Y/Z-axis: 30 m/min SPINDLE 1 Max. speed: 5,000 rpm Spindle nose: A6k Spindle bore: 65 mm Draw tube bore: 65 mm Chuck diameter: 210 mm Drive power: 24 kW SPINDLE 2 Max. speed: 7,000 rpm Spindle nose: Ø 110 mm Spindle bore: 42 mm Draw tube bore: 42 mm Chuck diameter: 140 mm Max. chuck jaw weight: 1.25 kg Output power: 16.5 kW Max. speed for driven tools: 8,000 rpm Number of tool turret stations 1: 12 Number of tool turret stations 2: 10 All tool positions are driven MACHINE DETAILS Control: FANUC SERIES 31 i-MODEL A Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 80 A Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 2,400 x 2,400 mm Machine weight: 9,000 kg Read operating hours: 5,381 h EQUIPMENT Chip conveyor by KNOLL Tool holders (as shown in the photos are included) External reference: Dürr

Condition: like new (used), Year of construction: 2005, Baublys BL 65 S / 500 NC Baublys BL 65 S / 500 NC, year of manufacture 2005, in very good original condition. The machine comes from the production of a renowned German mechanical engineering company. Ksdpfxew Eytue Aqqjdr Technical Data Manufacturer: Baublys Model: BL 150 S/NC 500 Year of manufacture: 2005 Laser: 150 Watt Laser type: Q-switched, pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 – 1.3 mm after output coupler mirror at TEM00 Beam divergence: 5 mrad TEM00 Pulse duration: CW / 90 ns Max. output power: 65 W multimode 16 W single mode Pulse energy: 16 mJ at 3 kHz Beam deflection system: Galvanometer system Line thickness (mixed mode): approx. 0.12 mm Deflection speed: 3 m/s; equivalent to 200 characters/sec with 1.5 mm height and single-line font Power Supply Voltage: 400 V, three-phase 50 Hz, 3 phases, clockwise rotating field Connection: 5-pin CEE plug, 16 A, 6h Max. power consumption: 8.5 kW, max. 16 A per phase Fusing: 3 x 16 A slow blow Water Connection Cooling water flow rate: 7.5 l/min at 20°C supply temperature Discharge connection: Thread G 3/4” male thread Heat load: approx. 6.5 kW Max. cooling water temperature at inlet: 20°C Water consumption: dependent on inlet temperature Outlet temperature:

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Kdedozvxkqspfx Aqqer Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder Kdsdpfjuiq Dhex Aqqjr 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2022, EMCOTURN E65 SMY - SIEMENS 3-AXIS CNC TURNING MACHINE WITH A TAILSTOCK AND POWERED TOOLS INCLUDING Y-AXIS AND C-AXIS Highly efficient universal turning machine for complete machining with stable and precise linear guides. State-of-the-art control technology SINUMERIK 828D with ShopTurn dialog programming. Main spindle: • Connection A2-6" (DIN 55026) • Max. bar diameter: ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Tailstock: Kodpfx Aszi Rr Tjqqodr • Connection A2-6" (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: • 12-position tool turret VDI 30 radially arranged with direction logic for up to 12 powered tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel range: +/-40mm Includes: • Hollow chuck cylinder incl. draw tube • C-axis for main/tailstock • Mechanical spindle brakes • Sinumerik 828D control with HMI Operate - SHOPTURN dialog programming - USB interface - Network drive / Ethernet - 15" multi-touch color monitor - 3D simulation, etc. • Coolant system incl. coolant pump (3.5 bar) • Chuck flushing (additional pump (3.5 bar)) • Part ejector and flushing through the tailstock • Air gun with spiral hose • LED machine bay light • Hydraulic unit • Interface for chip conveyor • Vibration-damping leveling feet • Mounting angle and high-performance anchor • Documentation / CE certificate Machine No. S6E222101 Year of manufacture: 2022 • Sinumerik 828D with dialog programming • Tool turret • 12-position tool turret VDI30 • Hollow chuck cylinder, C-axis for main and tailstock • Coolant system with coolant pump, part ejector • Hydraulic unit • Chip conveyor Jomatec 1200 mm • Tool breakage and wear monitoring • Part collection device • Short bar loader interface SL1200 • Tool measurement • 14 bar high-pressure coolant system • 3-jaw chuck BB-D 210/3 KK6 • Maximum machining length 175 mm • Maximum finished part diameter 65 mm • Maximum finished part weight 4.5 kg • Internal tool holder • Straight milling holder 90 mm • Angle drilling and milling holder • Door automation E 65

Condition: used, Year of construction: 2012, functionality: fully functional, total width: 1,370 mm, total length: 2,950 mm, total height: 1,800 mm, We offer this used Profi Packer SCV 400 film wrapping machine, manufactured in 2012. Manufacturer: Profi Packer Model: SCV 400 Year of manufacture: 2012 Condition: used Category ID: 1262 Type ID: 907 Machine type: Film wrapping machine Machine dimensions (L x W x H): 2,950 x 1,370 x 1,800 mm Cycle rate per minute: approx. 65 cycles Film thickness: 7 to 80 μm Kodpezvdadefx Aqqedr Includes infeed conveyor and hot air tunnel for heat sealing. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1989, Jagenberg Diana 65-1 folder gluer, production year 1989. - Straight line gluing Kdsdpfx Asw H Rc Nsqqer - 3-point gluing, crash lock, lock bottom - KQ glue system with 4 guns - Machine cleaned, in production – can be inspected upon request, in very good condition

Condition: not inspected (used), functionality: unexamined, Pfeiffer Vacuum Mod: Duo 65 Mod.-No: PK D46 602 Mod: ONF 035/065 D Kedpfjwnm Tmjx Aqqedr Mod.-No: PK Z40 150 For further data see the nameplate, device is untested.

Condition: used, maximum load weight: 28,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2022, next inspection (TÜV): 07/2026, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,665 mm, Year of construction: 2022, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Reisch 65 cbm Sliding Floor Trailer (Vehicle 607) Registration Date: 07/05/2022 Type: RSBS-3-10/C3V Permissible Gross Vehicle Weight (GVW): 35,000 kg Unladen Weight: 6,680 kg Payload: 28,320 kg Overall Length: 11,000 mm Overall Width: 2,550 mm Overall Height: 3,665 mm Load Volume: approx. 65 cbm TÜV (technical inspection): 07/2026, SP (safety inspection): 01/2027 Rollover Tarpaulin, Platform Clean floor, end panels, sides, reinforced rear walls Portal doors 1/2 and 1/2 at the rear with grain slide Remote control Cargo Floor system LED work lights + reversing lights 2 x 12-ton, 2-speed gearbox winch Storage box, plastic, passenger side, rear Kodjzq Tm Nopfx Aqqedr Air suspension with raising and lowering function 1st lift axle SAF disc brakes Tires: 385/65R22.5, 1st tire approx. 70/60%, 2nd tire approx. 60/50%, 3rd tire approx. 60/80% Half-shell fenders Access ladder Price: €30,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to €10,000 is the Ludwigslust District Court; for disputes exceeding this amount, it is the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Condition: like new (used), Several pieces in stock Solar inverter, Inverter 5 kW, SolarEdge SE5K-RW0TEBEN4 Manufacturer: SolarEdge Type: SE5K-RW0TEBEN4 Overall dimensions: 310 x 180 x 530 mm Built-in webserver with Ethernet connection for remote monitoring SetApp version – only the Wi-Fi antenna kit is required for communication High efficiency (max. 97.3%) Fixed conversion voltage Indoor and outdoor use (high protection class IP65) SmartGrid compatible Factory-installed MC4 connectors on the inverter 12-year manufacturer warranty, extendable up to 25 years for an extra fee Ksdoxukbxjpfx Aqqedr Attention! The inverter operates only with SolarEdge-compatible smart modules or additional Optimizers! AC power

Condition: good (used), Year of construction: 1998, functionality: fully functional, turning length: 600 mm, turning diameter: 310 mm, spindle bore: 65 mm, spindle speed (max.): 4,200 rpm, torque: 192 Nm, overall weight: 3,900 kg, swing diameter over bed slide: 600 mm, bar passage: 65 mm, Equipment: rotational speed infinitely variable, The machine is powered on and can be inspected at any time by appointment. Kdodszg U Itopfx Aqqsr

Condition: excellent (used), Here, we offer you an inspection system for crystalline silicon solar modules. Reliable quality assurance and process control throughout the entire solar module production. The Dr. Schenk SolarInspect series was developed to meet the specific requirements in the production of crystalline silicon solar modules. These ready-to-use vision systems provide reliable quality control for the entire ongoing production process. Furthermore, continuous monitoring of the production process allows for timely corrective measures to be taken in the event of process deviations. In the production of crystalline silicon solar modules, textured glass substrates are used instead of uncoated glass. Textured glass increases the transmission of sunlight. The optical signals in the vision system, triggered by the surface structure typically used for glass substrates in silicon solar modules, are often similar to or even stronger than those of the actual defect being inspected. Dr. Schenk has developed and manufactured SolarInspect, a system that specializes in the precise differentiation between glass structure and defects on the entire material surface, including the edges. Thanks to an innovative optical design, Dr. Schenk's inspection system can clearly detect glass defects and distinguish them from the glass structure. Reliable inspection of: - Uncoated incoming glass - Uncoated textured glass - Coated glass, e.g., AR (anti-reflective) coated - Layer application - Finished modules Kedpfx Aqezdtgisqodr Detection of: - Sheet glass defects, e.g., bubbles, inclusions, scratches - Dimensions - Edge defects - Layer defects, homogeneity and thickness of AR-coated glass SolarInspect - Exceptional performance features: - Innovative and modular optical design - Low operating costs - Ready-to-use vision systems optimized for specific process step requirements - Customized solution for all types and sizes of solar modules - Repeatable detection and evaluation - User-friendly quality and analysis tools for production control and process analysis - Easy integration into new and existing lines - Industrially proven design Type: SolarInspect Condition: used Sale is ex works. Scope of delivery: (See image) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle running hours. The machine can be connected and tested on-site. Kedjzr Rugjpfx Aqqodr

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Factory new – never installed! Weinig Hydromat 4300, high speed planer and moulder Feed speed 30-300 m/min Kodpfxjzu Awro Aqqedr Spindle 1 (Bottom) – Radial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 2 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 3 (Right): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 4 (Left): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 5 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer + profile jointer fully automatic Spindle 6 (Bottom): – Table tops with wood inserts, maximum cutting height of 65 mm with a flange of 100 mm – Rotaplan pressure plate above the bottom shaft – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic – Hydro bearing with automatic locking General: – Horizontal CNC-controlled pressure rollers – CNC-controlled positioning input – Marathon Powercoating Plus – Automatic waxilit pump – Weinig WMC with touchscreen – Kickback protection for sawing operations – Machine with spindle and feed brakes – Safety and sound insulation housing

Condition: excellent (used), Year of construction: 2022, Matt HV 1216 suspended shot blasting machine. Two 11kW turbines. In very good condition, lightly used. Kodpfxjztkzie Aqqodr