Used Surface Plate/Measuring Bar/Assembly Rulers for sale (35,541)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014072, empty load weight: 7,300 kg, maximum load weight: 27,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,530 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 3,330 mm, suspension: air, tire size: 385/65 R 22,5", tire condition: 100 %, color: silver, Chassis, semi-trailer, transport company Fine-grained steel, welded lightweight construction, kingpin plate with replaceable 2" kingpin, main frame reinforcement for 25 tons, with center of gravity at 3 m loading length in the retracted state. 13 pairs of hooks for lashing straps, welded onto the cross members. 23 pairs of lashing eyes recessed in the outer frame, each rated at 3.5 tons. 24-ton, 2-speed support winch in reinforced design for loading and unloading, single-sided operation. 1 spare wheel holder for 1 spare wheel. 1 storage compartment for stowage, open, with the option of stowing items behind the front wall or in a compartment between the extended longitudinal beams! 4 pairs of stake pockets recessed in the outer frame for rectangular tubes 80x80 mm. 5 stake pockets recessed in the middle of the floor for rectangular tubes 80x80 mm, with reinforcing beam, installed between the outer stake pockets, except for one. 6 lashing/stake rails recessed across the floor over the entire width to the outer frame (max. usable internal width between the outer stake sockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, top and bottom, spacing from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure, half open downwards. For lashing and inserting stakes 80 x 80 mm. Pull-out ladder at the rear on the right side. 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams for rectangular tubes 80x80 mm, including reinforcing beams. 10 "lightweight" stake sockets, B=80/ T=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded on at the bottom on both sides. 2 plastic toolboxes, b=600 / h=425 / t=460 mm, lockable. Telescoping extendable by a maximum of 4,000 mm and lockable approximately every 500 mm. Main frame telescoping Locking with pneumatic bolt locking + display of frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the left side in front of the axles. Storage compartment between the longitudinal beams in the extended state. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Last axle with trailing arm, with automatic reversing lock via reversing light and additional locking function on the vehicle via hand knob. Axle spacing offset 1310/1410 mm. Air suspension. Bdodpeza Dyyofx Adcjd 1st axle automatic lift axle, also electrically operated from the truck, with start-up assistance. Braking system 2-line compressed air braking system. Spring brake parking brake. 2 non-interchangeable coupling heads at the front. EBS Wabco, electronic braking system with EBS socket at the front. With raising & lowering valve + auto-reset function. Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately pre-equipped. Wheels and tires 385/65 R 22.5" steel rims. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front in LED. 2 white/red side marker lights at the rear in LED. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front. 1 rotating beacon with bracket, switched via side light. 2 pairs of warning signs, LED illuminated and extendable to 3,500 mm. Flashing side marker lights. Side 7-pin sockets, positioning 2x front panel, 2x support legs, 2x rear end. 1 additional 7-pin socket, in the underrun protection at the rear. 2 additional LED work lights, top inside on the fron

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Bodpoy Aubuofx Adcsdd Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: excellent (used), Professional hydraulic set from the renowned manufacturer HURST / Hale Fire Pump Co., used in technical rescue applications (fire brigade, rescue services). ——— Condition: Used, fully operational, and tested equipment Shows normal signs of use as seen in the photos Technically in good condition – ready for work ——— Technical specifications: • Model: SP 45 • Manufacturer: Hale Fire Pump Co. / HURST • Year of manufacture: 1992 • Operating pressure: 350 BAR • Power supply: 230V (single-phase) • Standard: DIN 14751 ——— Set includes: • HURST hydraulic pump • Hydraulic shears • Spreader • Hydraulic hoses (2 pcs.) • Cable drum • Set of quick couplings • Transport frame ——— Bedjyxr Dxspfx Adcsdd Applications: • Road rescue • Technical work and demolition • Rescue services / Volunteer / Professional fire brigades • Industry (spreading, cutting) ——— Advantages: • Robust, professional construction • High cutting and spreading force • Proven HURST technology • Complete set – ready for immediate use

Condition: excellent (used), For sale: professional screw compressor from renowned German manufacturer BLITZ Bdodey A Tp Ropfx Adcjd Model: Monsun Pro Eco 15 – industrial unit with excellent build quality, quiet operation, and high performance. Ideal for workshops, production plants, paint shops, and wherever constant and stable air pressure is required. ⸻ TECHNICAL SPECIFICATIONS: • Manufacturer: Blitz • Model: Monsun Pro Eco 15 • Motor power: 15 kW • Working pressure: 10 bar • Capacity: approx. 2.0 m³/min • Speed: 1500 / 3000 rpm • Year of production: 2011 • Power supply: 400V (3-phase) ⸻ OPERATING HOURS: • approx. 17,954 h ⸻ EQUIPMENT: - Control panel - Sound-insulated enclosure - Installation ready for connection - Compact design ⸻ TECHNICAL CONDITION: • Compressor fully functional • Normal signs of wear • Operates correctly ⸻ APPLICATION: • Automotive workshops • Industry • Manufacturing • Paint shops • Service centres

Condition: excellent (used), Professional fire-fighting motor pump from the renowned German manufacturer Ziegler (Albert Ziegler GmbH). This device is designed for water transfer—ideal for fire departments, agriculture, construction sites, and industrial applications. Robust, compact build on a transport frame (can be transported with a forklift truck). The pump is in good technical condition and complete as shown in the photos. Technical data: - Manufacturer: Ziegler (Germany) - Model: TS 8/8 - Year of manufacture: 1992 - Output: 800 l/min - Operating pressure: 8 bar - Speed: 4,400 rpm - Engine: petrol/gasoline - Operating hours: approx. 56 h - Weight: approx. 143 kg (ready for operation) - Standard: DIN 14410 / 14420 Condition: - Used - Normal signs of use - Technically flawless and fully operational Scope of delivery: - Ziegler motor pump Bedpfxsy D An So Adcsdd - Firefighting couplings - Complete set as shown in the photos Additional information: - The price refers to 1 unit of the pump - Sold as shown in the pictures - Can be shipped on a pallet or collected in person

Condition: used, machine/vehicle number: WFDFLT33901007921, empty load weight: 9,000 kg, maximum load weight: 26,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 02/2027, loading space length: 15,150 mm, loading space width: 2,480 mm, total length: 15,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: black, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Bedpfx Adoy Slp Iecedd Permissible/technical payload approx.: 26,000 / 30,000 kg Permissible/technical axle load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Maximum overall width: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Lower deck length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height, lower deck approx.: 900 mm Coupling height approx.: 1,150 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis, semitrailer for forwarding operations Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed in outer frame, rated at 2.5 t each 24 t two-speed landing gear, single-sided operation, with straight base, without compensator Chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter-shell mudguards in front of first axle and behind each axle With anti-spray mud flaps behind each axle Rear impact guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box at the front bulkhead Telescoping Central beam frame with neatly welded, interlocking telescopic frame components. Extensible by max. 1,500 mm and can be secured after approx. 1,500 mm; outer frame add-on sections approx. 1,500 mm long, for hooking into outer frame in telescoped state. Locking via mechanical pin system. Axles and Suspension SAF drum-braked axles Air suspension Braking System Dual-line compressed air brake system Spring-loaded parking brake Two fail-safe coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Note: This trailer may only be towed by vehicles that can ensure effective ABS operation! With lift & lower valve Wheels and Tyres 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Electrics 24-volt, multi-chamber lights, yellow LED side marker lighting Two white position lights at front Two white/red lane position lights at rear 2 x 7-pin fail-safe sockets at the front, without connecting cables Rotating beacon with holder, operated via parking lights (beacon removable) Floor Approx. 30 mm thick phenolic ply boards, high point load capacity for forklift axle loads up to max. 7,100 kg Steel/chequer plate covering in wheel arch area where required Front bulkhead/corner posts 25 mm aluminium hollow section profile, 1,950 mm high, steel corner posts, full height for volume version Approval / Signs With Dekra inspection and certificate Prepared for single-line number plate holder Warning sign according to ECE - 70 Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Bjdpfexv A T Nsx Adcedd Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Bdodpowk Rlxjfx Adcsd Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: good (used), Solenoid valve, directional control valve, valve manifold, control valve -Manufacturer: bar, solenoid valve type NM-321-H -Solenoid coil: MA 22 Bjdpfxsfth Sfe Adcsdd -Price: per piece -Quantity: 2 pieces -Dimensions: 135/72/H22 mm -Weight: 0.3 kg/piece

Condition: ready for operation (used), Year of construction: 1995, Used compressed air refrigeration dryer. Before being decommissioned, the refrigeration dryer was checked for functionality by a refrigeration technician. Subsequently, 18 kg of R22 refrigerant (2 bottles) were extracted and disposed of. All records are available. Bdodpfxsfy Trhj Adcod Afterward, a small amount of nitrogen was added. We can gladly have the dryer refilled with new refrigerant (e.g., R407C) for you. !! The selling price does not include refrigerant !! Manufacturer: Sabroe Model: SV 1010 AB Type: 50 A Max. flow rate: 55 m³/min (3340 m³/h) Pressure drop at max. flow rate: 0.38 bar Refrigerant weight: 18 kg (currently without refrigerant) Max. pressure, refrigerant side: 16/25 bar Air connection: DN 100 Condensate drain: Beko 2x 3/4 inch Max. pressure, compressed air side: 16 bar Max. flow rate Max. temperature: Compressed air: 60°C Power consumption with fans: 7.1 kW Voltage: 400 volts Dimensions (width/depth/height): 1880 mm / 1100 mm / 2000 mm Weight: 835 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,000 h, functionality: fully functional, overall weight: 3,315 kg, total length: 3,200 mm, total width: 1,630 mm, total height: 1,960 mm, motor manufacturer: Siemens, power: 236 kW (320.87 HP), volume flow: 3,013 m³/h, operating pressure: 4 bar, noise level: 77 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 1 unit Low-Pressure Screw Compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3,013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Bjdpoywr Tksfx Adcjdd Compressor speed: 3,630 rpm Speed control: with integrated frequency converter Cooling: Water-cooled with stainless steel shell-and-tube heat exchanger FUNKE 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3,200 mm Width: 1,630 mm Height: 1,960 mm Weight: 3,315 kg Also available: Cyclone Afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain Bekomat Shell-and-Tube Heat Exchanger Manufacturer: Funke Model: A100 805-6-1Pass Material: Stainless steel 2x Rubber Expansion Joints 1x Intermediate Flap Valve DN 150 with Auma Actuator SG 05.1 F07 1x Cooling Water Control Valve Samson 3274 DN 50 PN 16 1x Steel Pipe DN 150 with 2x 90° bends

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Bsdpjxqzmksfx Adcedd Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Year of construction: 2006, operating hours: 30 h, condition: used, functionality: fully functional, machine/vehicle number: 4292-1-197652, Used process plant from production changeover. The unit is suitable for applications involving viscous or temperature-sensitive media. Sale from location, inspection possible by appointment. Bedpoy Akm Hsfx Adcedd

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift Bdedpjw Hhwwsfx Adced • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: new, power: 152 kW (206.66 HP), fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 6,300 mm, loading space width: 2,400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, ----IVECO DAILY 70C21HA8/P * German registration documents * Not registered * 2 years manufacturer warranty from Iveco * Gross vehicle weight: 7,200 kg * EURO VI * 8-speed automatic transmission * Factory-installed rear axle air suspension * Hydraulically suspended driver’s seat * Central locking with remote control * Radio with Bluetooth and navigation * Multifunction leather steering wheel * LED daytime running lights * LED headlights * Electric windows * Electrically adjustable exterior mirrors Flatbed superstructure: * Steel frame in C-profile * Approx. 630 x 240 cm * Aluminum loading ramps * Electric winch with wireless and wired remote control * Side underrun protection painted in vehicle color * LED light bar * Mudguards with mud flaps * Tow hitch with 3,300 kg towing capacity Load securing accessories also available from us: * Lashing and tie-down straps * Load bars * Safety vests * Transport boxes * Edge protectors * Airbags for load securing * Wheel chocks * Etc. Financing and leasing available Bdjdpfxoyra Nue Adced We manufacture bodies of all types and sizes for any chassis. Tarpaulin, GRP sandwich, aluminum. Visit us at: Bodies – Complete vehicles – Trailers – Consulting – Financing Errors and prior sale excepted, no liability for typographical or input errors.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Bdjdjwqg Iiepfx Adcod Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: new, mileage: 500 km, power: 189 kW (256.97 HP), fuel type: diesel, gearing type: automatic, overall weight: 11,990 kg, loading space length: 6,400 mm, loading space width: 2,450 mm, emission class: euro6, color: yellow, Equipment: ABS, air conditioning, electronic stability program (ESP), IMMEDIATELY AVAILABLE!!! - Has a Polish day registration due to the tachograph Tow truck on DAF LF 260 * Rear axle with air suspension, operated via cable control * Auxiliary drive * Cab including luxury double co-driver seat with velour upholstery * Radio/USB player * EC control unit * Roof hatch with manual operation Tow truck superstructure * Sliding platform with remote control or with manually adjustable levers * The entire platform can be adjusted with the remote control * Lifting boom operated with manual levers * Lifting capacity of lifting boom: 2500 kg * Platform loading area approx. 640 x 245 cm * Payload: 4180 kg * Hydraulic winch operated with remote control or with manually adjustable levers * LED rear lighting * LED lighting on the light bar support * LED light bar * Work lights * Storage boxes * Trash can, broom, shovel and de-icing agent box * Pintle hitch * Ball hitch * 2x wheel chocks * Superstructure hot-dip galvanized Bdsdpfx Adsgl Hhtscsd

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,200 kg, loading space length: 6,700 mm, loading space width: 2,400 mm, color: yellow, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, ---- IMMEDIATELY AVAILABLE !!!---- IVECO DAILY 70C18H/P Payload approx. 2880kg * German papers * Without registration Bdsdpfx Aeuk T Exedcod * 2 years factory warranty from Iveco * GVW. 7200 kg * EURO VI E * PTO original from Iveco only possible in combination with a manual gearbox! * Air suspension ex works on rear axle * Hydraulically suspended driver's seat * ZV with FFB * Radio with Bluetooth * Multifunction leather steering wheel * Electr. Power windows * Electrically adjustable exterior mirrors Sliding plateau: * ALURAHMEN * Sliding platform hydraulically driven via remote control or manually via control lever * Hydraulic cable winch with radio remote control * Side underride guard painted in body color * LED light bar * Storage boxes * Mudguards with mud flaps * Trailer coupling with 3300 kg towing capacity Load securing is also available from us: * Tensioning and lashing straps * Locking beams * Warning vests * Transport boxes * Edge protectors * Dunnage bags * Wheel stoppers * etc. Financing and leasing possible We manufacture bodies of any size and type on any chassis. Tarpaulin, GRP sandwich, aluminum. visit us at: Bodies - Complete vehicles - Trailers - Advice - Financing Subject to errors and prior sale, no liability for printing and input errors.

Condition: as good as new (ex-display), Year of construction: 2023, Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a 0-8 BAR wash pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure is adjustable from 0-8 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Spray pressure: 0-8 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel panels above the tank Bedpfx Adjr Hm R Tjcedd - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: excellent (used), Year of construction: 2001, I sell the bar conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Brand: CEFLA Bsdpfxjt Rr Hbs Adcsdd Model: TR3000/133/RE/RU Total length 2,60m Band width 1450mm Feeding with electric motor 0,26kW / 0,35HP Fully working. Available immediately.

Condition: excellent (used), Year of construction: 2010, I sell the Finnrose bar conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Total length 4,20m Bdedpfxot Rr Hue Adcod Band width 1650mm Feeding with electric motor 0,37kW / 0,55HP Fully working. Available immediately.

Condition: new, Surface Shields SC300XL 200 pcs Shoe Covers. Please check out our other listings as well. Bdsdsvxvlzspfx Adcjd

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Bodpfx Adozd A Rdjcedd Table travel distances: approx. 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Max. grinding width: 500 mm Bdedpfx Adjzd Rqlocsd Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW Dimensions of magnetic clamping plates: 4 x 1,000 x 500 mm MACHINE DETAILS Weight: approx. 11 tons EQUIPMENT Including complete electrical system Permanent magnet plate Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: E1TAH0029, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 304 mm, table length: 600 mm, table width: 300 mm, TECHNICAL DETAILS Grinding length max.: 600 mm Grinding width max.: 300 mm Distance from table surface to spindle center: 585 mm Bjdpfxozgux Sj Adcjdd Grinding wheel dimensions: 304 x 31.75 x 76.2 mm Table and magnetic plate Table size: 600 x 300 mm Magnetic plate: 600 x 300 mm Axis movements Table longitudinal movement, hydraulic: 650 mm Transverse movement, automatic: up to 310 mm Machining: fully automatic in 3 axes Spindle and power Grinding spindle power: 3.7 kW Spindle speed, frequency inverter, max.: 2,100 rpm MACHINE DETAILS Dimensions and weight Dimensions: approx. 2,700 x 1,600 x 1,850 mm Machine weight: approx. 1,990 kg EQUIPMENT Fully automatic machining in 3 axes Touchscreen control panel with program management Automatic central lubrication Cooling system with automatic paper filter Enclosed splash guard with lighting Electronic handwheel