Used Tablet Counter for sale (2,790)

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Gusdps E Dquefx An Isg Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Guodsrxcu Sjpfx An Ijg Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit

Condition: used, Year of construction: 1998, Technical Data: Grinding Area (incl. grinding wheel width 50 mm): 700 x 320 mm Grinding Height: 400 mm Longitudinal Stroke: 740 mm Cross Stroke: 270 mm Clamping Surface of the Table: 1000 x 250 mm Distance Table to Spindle Center: 650 mm Max. Table Load: 400 kg Infinitely Variable Spindle Drive: 6 kW Max. Grinding Wheel Dimensions: ø300 x 60 x 127 mm Coolant System: 170 l Weight – Total Equipment: 4600 kg Features: - Fully electronic multi-axis control system, Brand NE (Manufacturer: Schleier) - Brushless AC servo and spindle drives - Manual feed of CNC axes via movable electronic handwheel, axis selection, rapid traverse +/- as well as digital increment display integrated into handwheel - Free-standing electrical cabinet incl. operating hours counter - Cooling unit - Automatic central lubrication - Enclosed work area - Oil collection pans - CE marking Accessories: - 6x grinding wheel flanges incl. grinding wheels Gjdpfx Ajxvy Hgjn Ijug - 3x grinding wheel flanges - 1 extracting device for grinding wheel flange - 1 balancing arbor - 1 set of leveling plates and screws - Extraction unit - Extended vertical column for extraction unit

Condition: used, mileage: 46,315 km, power: 110 kW (149.56 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 2,227 kg, maximum load weight: 1,273 kg, overall weight: 3,500 kg, wheelbase: 3,924 mm, fuel: diesel, color: white, gearing type: mechanical, suspension: other, number of seats: 3, total length: 5,932 mm, loading space length: 3,273 mm, loading space width: 1,780 mm, loading space height: 1,650 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, sliding door, soot filter, traction control, Disc brake, double passenger seat, rear step, interior trim, wooden load floor, length type L2, height type H1, partition wall, lumbar support, heat-insulating glass, clock & rev counter, brake pad wear indicator, 1st owner, front-wheel drive, Euro 6d_Temp, green emissions sticker (4), steel wheels, spare wheel, black, 6-speed gearbox, passenger airbag, right sliding door, electric windows (2x), radio, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, power steering, wood trim, electric exterior mirrors, comfort seats, towbar preparation, 3rd brake light, German version, further features available, errors and prior sale excepted. Trade-in possible. Financing available—please contact us for a tailored offer. A50 Front axle with increased load capacity C6L Multifunction steering wheel CL1 Steering wheel adjustable for tilt and height D50 Full partition wall E07 Hill start assist E1D Digital radio (DAB) E3J Switch field pre-installation E3M MBUX multimedia system with 7-inch touchscreen E46 Power socket in cab E57 Trailer socket electrics ED4 AGM battery 12 V 92 Ah EE12 230 V socket EK1 Wiring terminal for electrical connection ES0 Jump-start contact ES5 Dashboard charging package EW6 Digital extra: Remote Services Plus EY5 Mercedes-Benz emergency call system EY6 Breakdown management Guodpfx Aoz Alu Nen Iog F3F Passenger-optimized gear console F68 Heated and electrically adjustable exterior mirrors FM3 Wet wiper system GE9 6-speed manual gearbox H1B Tachograph operation in front under headliner H21 Heat-insulating glass with band filter on windscreen HH9 Semi-automatic TEMPMATIC air conditioning IF0 Model series C910 VS30 FWD IK0 Complete vehicle IS Wheelbase 3,924 mm IT4 3.5 ton version J4V Intelligent tachograph EU pre-installation J55 Seat belt warning for passenger seat J58 Seat belt warning for driver’s seat J6 Outside temperature display JA8 Crosswind assist JF1 Rain sensor JG0 Gear shift indicator JH3 Communications module (LTE) for digital services JI6 Initial running distance maintenance interval 40,000 km

Condition: used, mileage: 109,000 km, power: 109 kW (148.20 HP), first registration: 10/2017, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Contact our sales consultant quickly and easily. Attention! Sale preferred to business customers. Internal ID number: [3358] ----Optional available: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV & emissions certificate * Nationwide delivery * Financing possible even without down payment * Tow bar/reversing camera retrofittable on request * Spring offer: If desired, and for a surcharge of only €999, increase of towing capacity up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle Highlights: * 19% VAT deductible * German vehicle * Regularly serviced * Immediately ready for use * 1 owner * Euro 6 emission standard * High roof & long wheelbase * Tow bar * Air conditioning * Cruise control * Reversing camera * Lined cargo area Special equipment: Overhead storage in driver's cab, storage: luggage net on rear doors, document holder (smartphone/tablet), tachograph, cruise control including speed limiter, rear wing doors with 260°/270° opening angle, wooden floor in loading bay, infotainment system: UConnect with CD and MP3 player, with navigation unit and DAB radio, padded headrests, fuel tank: 120 L, cargo partition wall, metallic paint, rear view camera, partial sidewall lining in the cargo/vehicle area (up to belt height), upper sidewall lining in the cargo/vehicle area (above belt height) Other features: Driver's side airbag, integrated indicators in exterior mirrors, brake assist, solid rear wing doors (no glazing), body type: standard high-roof van, variant: high roof, heated crankcase ventilation, mesh partition behind driver, adjustable steering column (steering wheel), engine 2.3 L – 109 kW JTD KAT, wheelbase 3450 mm, tire repair kit, low-emission according to Euro 6, right-side sliding door (cargo/passenger area), side protective strips, seat covers/upholstery: fabric, cabin seats: double passenger seat, cabin seats: driver's seat height adjustable, driver's seat with armrest and lumbar support, slightly tinted glazing, water sensor fuel filter, oil level sensor ----Leasing or financing required? Gusdpfoy Sd D Rex An Ijg We offer attractive deals – also possible without a down payment! Please contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information on the Internet is non-binding and for general vehicle description only. Errors, typing mistakes and prior sale excepted. The binding nature and specification of the vehicle are derived solely from the purchase contract on site or by written confirmation. Vehicles with mileage above 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: used, functionality: fully functional, mileage: 95,452 km, first registration: 11/1965, overall weight: 1,277 kg, empty load weight: 1,177 kg, color: blue, axle configuration: 2 axles, fuel: regular/benzine 91, fuel type: gasoline, Year of construction: 1965, food truck / ice cream sales Gedpfjzwhvrex An Isug Renault Estafette year of manufacture: 1965 manual transmission This food truck is equipped with 2 refrigerators/freezers, 1 storage unit, and 1 counter/display case. Shore power connection Inverter Water tank + 2 sinks Awning 4 supports on the underside of the chassis to securely position the food truck The food truck is in running condition and starts easily; no MOT (periodic roadworthiness test) is required due to its age. It has some rust, but considering its age, it's in relatively good condition. The vehicle is a VAT-registered vehicle. Transportation is possible.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 14,900 W, number of axes: 4, This 4-axis HAAS ST-15Y was manufactured in 2022. It features a maximum spindle speed of 4000 rpm and a spindle power of 14.9 kW. The machine has a workpiece diameter over the bed of 419 mm and a maximum cutting length of 406 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15Y horizontal turning machine we have for sale. Contact us for further details. • Capacities • Chuck size: 210 mm • Max part swing: 419 mm • Max cutting diameter (BOT or VDI turret): 305 mm • Max cutting length: 406 mm • Bar capacity: 64 mm • Feedrates (rapid) • X-axis: 12.0 m/min • Y-axis: 12.0 m/min • Z-axis: 30.5 m/min • Axis motors (max thrust) • X-axis: 10,676 N • Y-axis: 10,231 N • Z-axis: 16,458 N • Spindle • Spindle nose: A2-6 • Spindle bore: 88.9 mm • Max spindle torque: 203 Nm at 500 rpm • Main spindle C-axis • C-axis power: 3.7 kW • Max speed: 60 rpm • Positioning accuracy: ±0.02° • Brake clamp force: 4448 N • Brake diameter: 366 mm • Brake holding torque: 190 Nm • Control: Interpolated motion and positioning • Turret and tooling • Number of turrets: 1 • Number of tool slots: 12 • Tool taper: VDI40 • Rotating tools: Yes • Live tooling speed: 4000 rpm • Turret configuration: 12-position VDI turret • Tailstock • Type: Hydraulic tailstock • Quill travel: 95 mm • Manual body positioning: 508 mm • Thrust range: 623–5027 N • Coolant and air • Coolant capacity: 114 L • Air required: 113 L/min at 6.9 bar • Electrical • Input AC voltage (3-phase high): 440 VAC • Full load amps (3-phase high): 20 A • Full load amps (3-phase low): 40 A • Configuration notes • C-axis: Yes • Y-axis: Yes • Driven tools: Yes Gujdpfx Anszlr I Ij Iog • Counter spindle: No • Power-on hours: 4,500 h Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Guodjzt Intepfx An Iog Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Note: The machine is in good working order. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Inspections are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, prior sale is reserved, and they can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty.

Year of construction: 2009, condition: used, Max. saw blade diameter: 500 mm Max. feed length: single 650 mm (3-stage feed possible) Gujdpfx Aezuzmfjn Isg Pneumatic material feed Pneumatic Sawing Feed Minimum quantity spray device Piece counter with shut-off automatic Digital display of conveyance length Cutting height quickly adjustable via 4-position selector switch Includes chip suction 800 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 63,368 h, This 3-axis SW BA 40 vertical machining centre was manufactured in 2001. It features an impressive X-axis travel of 1300 mm, Y-axis travel of 630 mm, and Z-axis travel of 630 mm. The machine is equipped with a powerful spindle speed range of 20 - 7,500 rpm and a tool magazine with 60 slots. If you are looking to get high-quality machining capabilities, consider the SW BA 40 machine we have for sale. Contact us for further details. Guodpjzxpcpsfx An Ieg - X-Axis Travel: 2 x 1300 mm (3350 mm in long-bed operation)- Y-Axis Travel: 630 mm- Z-Axis Travel: 630 mm- Clamping Surface (Pendulum Operation): 2 x 1275 x 630 mm- Rapid Traverse X/Y/Z: 40 m/min- Feed Rate: 1 - 40,000 mm/min- Spindle Diameter: 100 mm- Spindle Speed: 20 - 7,500 rpm- Spindle Power: 36 kW (at 25% ED)- Spindle Torque: 950 Nm (at 25% ED)- Tool Taper / Holder: SK 50 DIN 69871, Form B- Tool Magazine Slots: 60- Max Tool Diameter (Free Neighboring Slots): 110 mm (250 mm)- Max Tool Weight: 8 kg (24 kg)- Measuring System: Linear- NC Rotary Table: Peiseler ATU 280 with counter-bearing- Coolant Pressure (Internal): 40 bar- Coolant Cleaning: Gap filter- Work Area Flushing: Yes- Flush Guns: 2- Tool Breakage Monitoring: Leutze- Enclosure: Full enclosure- Extraction System: GEA-Delbag, 2 x KNAW 1-1-AF- Floppy Disk Drive: Yes- Required Footprint (L x W x H): 7700 x 3700 x 4000 mm- Foundation Required: No- Nominal Service Voltage: 3/PE AC 400V / 50Hz- Nominal Working Current: 87 A- Total Connected Load: 50 kVA (60 kVA rated capacity)- Supply Line Fusing: 100 A- Working Hours: 63,368 h- Optional Equipment: Extended machine hydraulics for workpiece clamping, valve system for double-acting clamping cylinders, 2 clamping circuits in left work area, 2 clamping circuits in right work area, clamping pressure 250 bar / Q=9 l/min, adaptation for angle drill heads (without 4-point support), automatic loading doors, approx. 60 SK50 chucks, 1x double angle head, reversible clamping device (A-axis and counter-holder), clamping bridge

Condition: ready for operation (used), Year of construction: 2015, operating hours: 42,222 h, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. The machine comes with a large and valuable set of spare parts and components. Contact us for further details. Control system: CNC 310 isTotal hours: 61295 hOperating hours: 42222 hMain spindle power 20/25 kWCounter spindle power 17 kWMax. main spindle speed: 5000 rpmMax. counter spindle speed: 5000 rpmMax. main spindle bar diameter: 65 mmMax. counter spindle bar diameter: 45 (65) mmCNC CONTROLLED AXESStroke X1 165 mmRapid speed X1 30 m/minAcceleration X1 5 m/s2Stroke Z1 678 mmRapid speed Z1 30 m/minAcceleration Z1 5 m/s2Stroke Y1 80 (+50/-30) mmRapid speed Y1 30 m/minAcceleration Y1 5 m/s2Stroke X2 165 mmRapid speed X2 30 m/minAcceleration X2 5 m/s2Stroke Z2 640 mmRapid speed Z2 30 m/minAcceleration Z2 5 m/s2Stroke W2 690 mmRapid speed W2 30 m/minAcceleration W2 5 m/s2Number of turrets 2Number of rotating tools each station 12 all driven positionsTool system VDI 30Max driven tool speed 4.000 rpmApprox. coolant tank capacity 650 lCoolant pump max.capacity (per each turret) 20 l/minPump pressure 7 barPower supply 91 kVALxWxH of the machine 4.500x1.990x2.300 mmApprox. machine weight 9.500 kgThe machine comes with a large and valuable set of spare parts and components.IEMCA MASTER 865 MP 43 L (4m) bar feederBase machine configuration:- Drive for slide 1 and 2 (all 12 pos.)- C-axis for main and counter spindle- Y-axis for slide 1- Swarf conveyor belt type- Counterspindle collet cleaning with coolant- Workpiece unloading including belt- Mechanical preparation for oil mist filter- Electrical and software interface for bar loader- Angular synchronism between main and counter spindle- Automatic machine shut down- 2 additional on/off outputs (4 M-functions)- Rigid tapping- Piece and time counter- Software for polygonal turning for slide 1 and 2- Constant cutting speed- Helical interpolation for slide 1- Spindle speed control- Quadruple warning light- Cooling device for electrical cabinetAdded options:I-V50011 Collet chuck Type "MPF 65/140" without axial feed for main spindle max. diameter: 65mm.Clamping elements and other equipment:I-V50025 Manual collet changer type "SACO MPT65/140 and MPF65/140"I-V50092 Differential pressure for counterspindle, possibility of setting two different clamping pressures.I-V50083 1 set of soft jaws for chuck type "SMW 175-BBD"I-V50080 Chuck type "SMW 175-BBD" For counter spindle, including adapter for adapting the spindleI-V60050 Tool holder for drilling tools with internal cooling and cylindrical shank Ø 32mm,with clamping shank according to DIN 69880 (VDI 30) - 4pcsI-V60010 Radial tool holder for external machining type C1 with clamping shank according to DIN 69880 (VDI 30) - 5pcsControl system options:I-V12060 Tool wear monitoring system Monitor for CNC FANUCI-V12070 Sister tool selection system for Tool Monitor for CNC FANUCHydraulic and filtration equipment:I-V40045 External flushing of jaws/collets with coolant on main spindle and counter spindleSpecial optionsSK001 Special clamping device with mandrel for counter spindle product HAINBUCH AXFIX 811 including 2 collets Gedpfjzhklwsx An Ijug

Condition: good (used), Schlebach Mini Prof Plus ☑️Immediately available, no delivery time☑️ Universal machine for the production of double standing seam profiles 25 from sheet material, coils, or cut-to-size pieces in a single pass. The machine is equipped with: ✅ Profiling rollers for 25mm seam height ✅ 230V connection ✅ A manual slitting shear RS for cross-cutting ✅ A slitting knife LS for cutting to width Gusdpfxozxrg Rs An Ijg ✅ An electromechanical counter (accurate to the cm) ✅ Bending capacity: 0.8mm (zinc, aluminum & copper), 0.7mm steel sheet Condition: • Good technical condition • Good optical condition • Weight: approx. 315kg An inspection and test run are possible by arrangement. The price is €14,250 net, plus VAT, totaling €16,957.50 gross. You will receive an invoice with VAT shown.

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 7,500 l, total length: 3,350 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 491 kg, warranty duration: 12 months, Equipment: CE marking, Double-walled 7500-liter diesel tank: 230 Volt (TT7500P) The TT7500P is a robust 7500-liter double-walled diesel storage tank equipped with a fully functional 230-volt filling system. With a flow rate of 72 liters per minute, a 6-meter filling hose, and an automatic filling nozzle, this tank is suitable for professional use on construction sites, at contracting companies, in the agricultural sector, and at industrial locations where reliable and safe large-scale fuel storage is required. Safety & Construction The double-walled plastic construction offers maximum protection during diesel storage and features an integrated leak detection system that immediately signals any leakage between the walls. Thanks to the overfill protection, unwanted overflow is prevented. The lockable pump housing protects the system against unauthorized use and weather conditions. Gjdpfx Aozwv Iion Isug Operation & Regulations For easy management of fuel consumption, the tank is equipped as standard with a digital liter counter with daily and total displays. The tank complies with BAL regulations, making it suitable for stationary storage in accordance with applicable environmental and safety requirements. Key benefits: Double-walled construction with leak detection for maximum safety; Complies with BAL regulations for stationary diesel storage; 230 Volt filling pump with 72 ltr/min, 6 m hose, and automatic filling nozzle; Digital flow counter with daily and total display; Lockable pump housing with overfill protection.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 820 mm, overall weight: 6,000 kg, number of slots in tool magazine: 12, number of axes: 3, Horizontal turning machine manufactured in 2008. This MORI SEIKI NL 3000 MC/700 features a maximum turning diameter of 430 mm and a turning length of 713 mm. It includes a 12-station turret for efficient tool changes and operates at a spindle speed of 3000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL 3000 MC/700 machine we have for sale. Contact us for further details. Guedpfezwxzxsx An Isg - Chuck: 12" (3-jaw chuck)- Max Turning Diameter: 430 mm- Swing Over Bed: 978 mm- Turning Length: 713 mm- Phase: 3 Phase- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 133 A- Current Rating of Spindle Motor: 300 A- Short Circuit Current: 1 kA (220 V Maximum)- Rated Power: 46 kVA- Machine Dimensions: 3,400 mm x 2,089 mm x 2,270 mm- Optional Accessories/Equipment: Tooling, chip conveyor, accessories/manuals available Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 34, spindle bore: 86 mm, overall weight: 16,000 kg, Turning and milling center acquired through business takeover Manufacturer: Mori Seiki / Model: MT 250S / 1500 / Year of manufacture: 2000 / Refurbishment for 200,000 euros Condition: good, Control: CNC Mori Seiki MSC 501 Technical data: See attached PDF Max. turning diameter: 570 mm Turning length: 1530 mm Max. swivel diameter: 800 mm Swivel diameter over cross slide: 420 - 860 mm Spindle distance: 1,828 mm Main spindle: Speed range: 35 - 3500 min.-1 Main spindle power: 18.5 kW / 15 kW Number of curve speeds: 2 Spindle nose: JIS A2-8 Max. bar capacity: 73 mm Spindle bore: 86 mm Spindle bearing diameter: 130 mm C-axis: 0.001° Counter spindle: Counter spindle speeds: 50 - 3500 min.-1 Counter spindle power: 11 / 7.5 kW Number of curve speeds: 2 Spindle nose: JIS A2-6 Max. bar capacity: 60 mm Spindle bore: 73 mm Spindle bearing diameter: 110 mm C-axis: 0.001° Milling spindle: Spindle speeds: 8000 min.-1 Power: 7.5 kW / 5.5 kW Tool taper: KM 63 Spindle bearing diameter: 80 mm B-axis: 120° / 105° Resolution: B 0.001° Number of tools: 42 Tool taper: KM 63 Max. tool diameter: 80 / 125 mm Max. tool length: 400 mm Max. tool weight: 8 kg Tool change time: 1.6 sec. X-axis: 635 mm / Y-axis: + / - 110 mm / Z-axis: 1595 mm / B-axis: 120° / 105° + Chuck: Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min. Gusdpfx Aezxg Suon Ijg Max. feed rate: 30,000 mm/min. / Total power: 72.3 kW / Weight: 22 tons / Dimensions: 7.0 x 3.5 x 3.5 m, steady rest

Condition: new, total width: 1,750 mm, total length: 810 mm, total height: 1,500 mm, input voltage: 400 V, power: 1.5 kW (2.04 HP), overall weight: 580 kg, Gravity-fed operation Gentle handling of the dough 110 cm conveyor belt 110 mm piston Dough piece weight: 60 to 600 g Weight adjustment via handwheel Speed adjustment via handwheel Output: 1000 to 2000 pieces/hour Piece counter with automatic stop 150 kg stainless steel hopper with Teflon coating Sliding safety grille Automatic flour dispenser (optional) Gjdjzynnmspfx An Ijug Three-phase power supply: 400 V / 50 Hz Power: 1.5 kW Dimensions: 1750 x 810 x 1500 mm Net weight: 580 kg DVB110-100 volumetric divider with manual adjustments and a 110 cm conveyor belt General Overview The DVB110-100 is a volumetric divider designed for dough processing with a clear, factual approach, and features that are directly applicable in a B2B environment. This model utilizes a gravity-fed operation, advertised as gentle on the dough, and includes a 110 mm piston, a weight range of 60 to 600 g, and a 110 cm conveyor belt. It is designed for production environments where consistent portioning, simple adjustments, and clear technical specifications are as important as the overall robustness of the machine. The machine features a 150 kg stainless steel hopper with Teflon coating, weight and speed adjustments via handwheel, and a piece counter with automatic stop. Why this model stands out This model stands out due to a consistent set of technical data that is useful during the selection process. The combination of a gravity-fed principle, manual adjustments via handwheel, and an output of 1000 to 2000 pieces/hour reflects a desire for consistency and control in the process. The 110 cm conveyor belt provides a configuration suitable for a longer output, while the 150 kg stainless steel hopper with Teflon coating further enhances the model’s appeal for continuous use. The presence of a sliding safety grille and a counter with automatic stop completes a design focused on structured, clear, and safe operation.

Condition: used, Year of construction: 2011, bore capacity in steel (diameter) 40 mm throat 250 mm bore stroke 125 mm spindle taper MK 4 spindle turning speed range 50 - 2500 U/min 550 mm 230 mm Guodpszyvawofx An Ijg table surface area 820 x 240 mm connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,2 x 1,0 x 1,85 m Drilling and milling machine - Digital display - Clockwise/counter-clockwise rotation - 2 electric speed ranges - Drilling spindle with automatic feed and manual feed - Includes machine stand

Condition: used, Year of construction: 1970, diameter / mm Cutting (quantity) / Gsdpotnmmbjfx An Isug weight / kg This tailstock comes from the Froriep D1.050x10.000 crankshaft lathe. This is sold individually and can be used for various purposes Can be used, for example as a counter spindle or for other purposes. Center height: 500 mm

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed Godpfxsqlck No An Isug - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Standard features: With pivoting head (left/right) for miter cuts, two speeds, Sturdy cast iron machine housing, Reduction gear in oil bath, consisting of a bronze gear and hardened, ground steel worm. Quick-action vise with counter-clamping device for double workpiece clamping. Durable, mechanical coolant pump Adjustable length stop Operating tool Machine color: RAL 7037 Technical specifications KS 315 M Motor: three-phase 400 V, Gujdpfxjuihklo An Iog pole-changing (kW) 1.3/1.9 Vise clamping width (mm) 110 Cooling tank capacity (l) 5 Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine dimensions with base frame (mm) 1,000 x 1,100 x 1,800 Machine dimensions 12-month warranty for single-shift operation Not included: Saw blade (mm) Ø 315 x 32 Steel base frame DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Feed unit with a consistent feed rate and no power loss Metal gearbox with hardened gears Metal cover for the feed rollers Right-hand and left-hand operation Powerful motor Durable PU feed rollers Tripod with extended outrigger arm as standard Individually adjustable for horizontal and vertical use With counter Model VSA 48 L Article no. 5115500 Technical data Max. outreach 1050 mm Number of feed rollers 4 Roller diameter 120 mm Roller width 60 mm Roller travel 25 mm Speed stages 8 Gjdpfxjcnxmze An Ijug Speeds 2/4/5.5/6.7/11/13/16.5/33 m/min Motor power 0.75 kW Connection 400 V / 50 Hz Weight 65 kg

Year of construction: 1995, condition: not inspected (used), Number of sanding units 2 st. sanding width 180 mm Sanding height max. 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided; sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded hold-down rollers; infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machine's upper section Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch with automatic shutdown of all drives Technical data: Top motor: 4 kW Bottom motor: 4 kW Top brush: 0.37 kW Bottom brush: 0.37 kW Feed drive: 0.5 kW Height adjustment: 0.12 kW Compressed air requirement: 6 bar, 400 NL/min Sanding belt speed: 25 m/sec Machine dimensions: 1,600 mm length 1,150 mm width 1,800 mm height Workpiece dimensions: Min. thickness 15 mm, max. thickness 150 mm Min. width 10 mm, max. width 180 mm Min. length 290 mm Gsdpezqgg Aefx An Ieug 4 extraction ports: 2 x 120 mm, 2 x 80 mm; required air velocity at extraction port: 25 m/sec (Technical specifications according to manufacturer – subject to change/no guarantee!)

Condition: excellent (used), mileage: 985,000 km, power: 228 kW (309.99 HP), first registration: 05/2001, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, fuel tank capacity: 15,000 l, color: red, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel-air, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,100 kg, loading space volume: 15 m³, Year of construction: 2001, Equipment: ABS, differential lock, electric window regulation, parking heater, power mirror, = Additional options and accessories = - 430 liter diesel tank - Aluminum fuel tank - Heated mirrors - Comfort driver's seat - Differential lock - Differential lock - Speed limiter - Hydraulic system - Refrigerator under the bed - Lift axle - Radio/CD player - Sleeper cab - Auxiliary heater - Tool box - Power take-off (PTO) - Power take-off (PTO) - ZF16 manual transmission = Notes = GOOD CONDITION M.A.N. TGA26.312 A (6-CYLINDER HEADS) 6x2 15,000 LITER WATER TANK WITH ZF16 MANUAL GEARBOX & LIFT-AXLE !! 310 HP, 6-CYLINDER ENGINE (6 CYLINDER HEADS)!! 16 GEARS MANUAL GEARBOX!! STEEL SUSPENSION FRONT AXLE!! AIR SUSPENSION REAR AXLE!! ETC.!! TANK BODY: LENGTH x WIDTH Approx. 5.80 x 2.43 x 1.60 M. !! (15,000 LITERS) !! 3 COMPARTMENTS!! ANALOG COUNTER!! LADDERS!! GOOD WORKING TRUCK, READY FOR (WATER) TANKER JOBS!! MORE M.A.N. 4x2 / 6x4 / 6x6 / 8x4 / 8x8 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, TRANSPORT, TRANSIT REGISTRATION, OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE-STOP-SHOP" COMPANY!! PLEASE CHECK OUR STOCK ON OUR WEBSITE: YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( / ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,967 cc Transmission Transmission: ZF16 MANUAL GEARBOX, 16 gears, manual transmission Axle Configuration Brakes: Disc brakes Front axle: Tire size: 315/80R22.5; Max. axle load: 7100 kg; Steered; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80R22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire size: 295/80R22.5; Lift axle; Max. axle load: 7100 kg; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Air suspension Weights Unladen weight: 10,860 kg Payload: 15,140 kg GVW: 26,000 kg Functional Body brand: MUERMAR RVS 15,000 LITER TANK Pump: Yes Water system: Yes Hoses: Yes Condition Technical condition: very good Optical condition: good Further information Please contact the Sales Department for further information. Gsdjzphhxopfx An Ioug

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. Guodpfx Aozmx Scsn Isg ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: used, mileage: 66,926 km, power: 88 kW (119.65 HP), first registration: 02/2025, fuel type: diesel, empty load weight: 2,965 kg, maximum load weight: 525 kg, overall weight: 3,490 kg, wheelbase: 3,000 mm, next inspection (TÜV): 05/2028, fuel: diesel, energy efficiency: C, fuel consumption (combined): 6.8 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 2, maximum speed: 150 km/h, number of beds: 2, Equipment: ABS, additional headlights, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, lighting, onboard computer, sliding door, soot filter, spoiler, traction control, * Well-maintained German vehicle, first owner * Vehicle IDNT No.: ZFA250005R2Z48929 * New TÜV/MOT inspection Special equipment: * Storage compartment in the dashboard (lockable) * Airbag, passenger side * Antenna (three-function antenna) integrated into the exterior mirror * Exterior mirrors, electrically adjustable and heated * Document holder (smartphone/tablet) * Cruise control system (including speed limiter) * Air conditioning * Fog lights with static cornering light * Wheel covers Godpfx Aezc R Eujn Ijug * Seat base trim * Traction Plus (electronic traction control including ESP) * USB connection * Preparation for DAB radio reception * Pre-wiring for electrical superstructure Standard equipment: * Airbag, driver side * Anti-slip regulation (ASR) * Drive type: Front-wheel drive * Brake assist * Electronic stability program (ESP) * Driver assistance system: Adaptive Load Control (LAC) * Driver assistance system: Hill start assist * Power windows, front * 6-speed transmission * Body/structure: High-roof panel van, standard * Body variant: High roof * Fuel tank: 90 liters * Removable cargo area partition (without window) * Steering column (steering wheel) adjustable * Engine 2.3 L - 88 kW turbo diesel Multijet * Wheelbase 3000 mm * Full-size spare wheel (including spare wheel holder) * Diesel particulate filter * Low emissions according to Euro 6d-TEMP emission standard * Power steering, electronically controlled (Servotronic) * Seat cover/upholstery: Fabric * Seats in the cab: Double passenger seat * Seats in the cab: Driver's seat with armrest and lumbar support * Start/stop system * Central locking with remote control Delivery throughout Germany possible!!! Trade-in possible!!! Leasing and financing possible, even without a down payment. Subject to errors, printing errors, and prior sale.