Used Ultravent Hood for sale (804)

Year of construction: 2008, condition: used, 5-vessel-brewhouse with additional whirlpool with a knockout capacity of 250 hl at 12° Plato. The brewhouse consists of a mash kettle, a mash decoction kettle, a lauter tun, a prerun vessel and a wort kettle with internal boiler. Furthermore, a classic whirlpool with wort cooling and wort aeration is installed. The brehouse is fully automated with the electronic process control "brewmaxx V7" and on basis of the operation system Windows. The brewhouse is completely made in stainless steel, but installed beneath the old copper hoods. The prerun vessel is "Outdoor"-installation, the whirlpool is - like the other brewing vessels - installed in the brewhosue room beneath a copper hood. Additional title: Modern brewhouse made of stainless steel, copper-clad Cast wort capacity: 250 hl Operation / Control: Fully automatic with "brewmaxx V7" process control system Material: Stainless steel brewhouse with copper cladding Features: Mash tun kettle, mash kettle, kettle vapor condenser, lauter tun, spent grains bunker with spent grains conveyor, feed vessel, wort kettle with internal boiler, hop dispenser, spindle station, whirlpool, wort cooling, wort aeration, Various pumps, measurement and control technology, valves, control cabinets Dodpfxow T St Ue Apweut

Year of construction: 2003, condition: used, Additional title: brew vessel from stainless steel Total volume: 260 hl Diameter approx.: 3 m Diameter incl. insulation approx.: 3 m Frame height: approx.: 2 m Width: 3,4 m Dodpfovcqz Eox Apwjut Material: stainless steel 1.4301 Base construction: on stainless steel pipe supports, ground pegged Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Year of construction: 1979, condition: used, Westfalia Separator, last used in a fruit juice plant. The separator's control system was modernized by GEA. The product is clarified in the centrifuge bowls and conveyed further under pressure. Solids collect in the solids chamber and are periodically discharged automatically. During CIP cleaning, the cleaning fluid is pumped in a circuit. Additional title: Disc centrifuge Intake capacity: 22000 l/h flow rate for fruit juice approx. 4,000 l/h Drum velocity: 6500 rpm Density liquid phase: 1 kg/dm3 Density solid phase: 1.4 kg/dm3 Duodpsyr Ic Nofx Apwst Power: 18.5 kW Current: 37 A Voltage: 380 V Frequency: 50 Hz Length: 1485 mm Width: 850 mm Height: 1470 mm Weight: 1200 kg Material: Stainless steel surfaces that come into contact with the product Position: on a 685 x 585 mm foundation Features: Drum, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, drain, solids outlet, control water drain, circulation monitor, oil sight glass, brake, control valve, hood flushing, pressure gauge

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 40,000 mm, empty load weight: 1,600 kg, fuel: diesel, overall weight: 1,600 kg, water tank capacity: 500 l, temperature: 98 °C, noise level: 91 dB, Equipment: chassis, HDS-Trailer 17/20 / Cap Version Stationary Solution on forklift-compatible base frame with castors (see photo) Equipment condition: as new, only used for maintenance purposes, < 10 operating hours Configured with: - 900-1700 l/h water flow rate at 200 bar pressure - 80-98°C water temperature - 500L water tank / Kärcher hood Djdpfjy H Dmujx Apweut - On base frame with castors (forklift-compatible) - Diesel engine (no electrical connection required) - Speed control via throttle lever - 2 x high-pressure hose reels, each with 40m HD hose 6.110-045 - 2 lance operation incl. equipment (accessories) consisting of: gun 4.118-005; lance 1050mm 4.112-000; quick coupling 2.115-000; plug-in nipple 2.115-001 - S/N: 11514 - 1x HD hose 40m, 6.110-045 - 1x pipe cleaning hose 20m, 6110-008 - 1x pipe cleaning nozzle, 5.763-088 All maintenance carried out up to 2024

Condition: excellent (used), mileage: 38,381 km, power: 105 kW (142.76 HP), first registration: 03/2018, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, total length: 7,000 mm, total width: 2,140 mm, total height: 1,910 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,300 kg, loading space length: 4,310 mm, loading space width: 2,140 mm, loading space height: 1,910 mm, Year of construction: 2018, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, electric window regulation, power assisted steering, power mirror, soot filter, traction control, trailer coupling, Technical information Engine capacity: 2.143 cc Axle configuration Tyre size: 195/75R16 Make axles: Continental Vanco2 Brakes: disc brakes Front axle: Max. axle load: 1850 kg; Steering; Tyre profile left: 60%; Tyre profile right: 60% Rear axle: Max. axle load: 2300 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40% Weights Empty weight: 2.604 kg Carrying capacity: 896 kg GVW: 3.500 kg Functional Make of bodywork: SCATTOLINI HUIF Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Other information Cargo space outer length: 431 cm Cargo space outer width: 214 cm Cargo space outer height: 191 cm Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Climate control - Heated door mirrors - Lane assist - Leaf spring suspension - Multifunctional Steering Wheel - Particulate filter - Radio/Cd/Audio system - Twin wheel axle = Remarks = Video working vehicle: Very neat and in new condition Mercedes Sprinter 514 CDI Hood 2.2 CDI GVW 3500 KG (driving license B) 38,000 KM demonstrable Year of construction 2018 Air conditioning Tow bar 2000 KG braked towing Internal dimensions: Length 431 cm Width 214 cm Height 191 cm Dodjygtaiopfx Apwout New condition car

Condition: new, functionality: fully functional, mileage: 1 km, power: 14.7 kW (19.99 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 2,420 kg, empty load weight: 2,420 kg, operation weight: 2,420 kg, lifting height: 4,300 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, Equipment: additional headlights, adjustable chassis, air conditioning, cabin, hydraulics, Excavators GT3000 The GT3000 excavator is a modern tracked machine designed for earthmoving operations requiring excellent working range, high digging force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation works, installation tasks, municipal projects, and operations in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator features a 0.09 m³ bucket with a width of 460 mm. The bucket digging force of 17.6 kN allows for efficient excavation, even in tougher soils. The maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a wide working range without the need for frequent repositioning. A digging height of up to 4510 mm and a dumping height of 2760 mm enable easy loading of materials onto transport vehicles. Dimensions and Stability The overall machine dimensions are 4010 mm in length, 1540 mm in width, and 2360 mm in height to the top of the cab (1380 mm to the top of the boom). The track contact length of 1530 mm and a track width of 1510 mm ensure stability during operation. Track shoes with a width of 250 mm and a low ground pressure of 26.7 kPa allow safe working on less solid surfaces. Mobility and Maneuverability A tail swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and counterweight clearance of 485 mm, along with a minimum ground clearance of 255 mm, ensure smooth movement over uneven terrain. The robust undercarriage with a track length of 1895 mm provides excellent traction and safe operation. Technical Specifications Operating weight: 2420 kg Engine type: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.7 kW Rated engine speed: 2200 rpm Max. hydraulic system pressure: 18 MPa Dedpfx Apjymtdnowout Max. gradeability: 30° Ground pressure: 35 kPa Max. travel speed: 2.5–3.5 km/h Max. tractive force: 16 kN Max. slewing speed: 11 rpm Max. digging force: 15 kN Max. digging height: 4300 mm Max. dumping height: 2530 mm Max. digging depth: 2550 mm Max. digging radius: 4150 mm Digging radius at max. height: 2700 mm Minimum radius: 1800 mm Boom length: 1950 mm Arm length: 950 mm Bucket width: 450 mm Overall length: 3950 mm Overall width: 1400 mm Overall height: 2300 mm Minimum turning radius: 790 mm Track length on ground: 1870 mm Track width: 250 mm Ground clearance: 250 mm Platform width: 1330 mm Engine hood height: 1350 mm Platform height above ground: 480 mm

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Dsdpfx Ajxy Tm Iepwjut

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Duodpfx Ajxy Tmuopwot

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front Dedpfx Apjy Hm E Hewsut • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request. Duodpfx Apjy Hm Etewst

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe Djdpfx Apjy Hm Eysweut • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: used, Year of construction: 2017, Equipment: all wheel drive, And we managed to get this one as well! Beautiful, clean machine – top equipment! Liebherr L 546 Z 2plus1 Chassis No. VATZ1560CZB045370 Year of manufacture: 2017 Operating hours: approx. 11,263 4-cylinder inline engine, 120 kW / 163 HP, water-cooled with turbocharging, Emission Stage 4 Operating weight: approx. 14,300 kg Machine width: 2,500 mm Hydrostatic travel drive with 3-speed transmission • Automatic climate control – maintains set temperature • 3rd and 4th hydraulic control circuit for attachments such as high-dump bucket, grapple bucket, etc. • Ride control BSS – lift arm suspension • Liebherr factory-installed central lubrication system • Fluff filter ahead of cooling pack prevents contamination • Coarse-mesh radiator for easier cleaning • Reversible fan for radiator cleaning – reverse operation • Access aid in front of windshield for easier cleaning • Air filter with “TopSpin” pre-cleaner for intake air • Premium touchscreen display • “Comfort” driver’s seat with pneumatic suspension, seat heating, and headrest • Adjustable steering column for height and tilt • Left and right armrests • Tilting window on left driver’s door • Radio • Steel headlamp bracket for front headlights instead of plastic • 4 rear LED work lights on the cab roof • 4 front LED work lights on the cab roof • 2 additional rear work lights on the engine hood • Reversing alarm (audible – beeper) can be switched off • Rear area monitoring camera • Rear tow hitch • Crane lugs front and rear on the frame • Joystick steering and conventional steering • Tyres 20.5 x 25 FA 2 x 40% tread Tyres 20.5 x 25 RA 2 x 40% tread Net price with fixed-mounted 2.8 m³ bucket: €55,900 net plus VAT Optional equipment at extra charge: Duedpfx Apoyqn Hxowst - Hydraulic quick coupler: €3,550 - Grapple bucket 3 m³: €3,980 - High-volume bucket 5 m³: €3,990 - High-dump bucket from 3–5 m³: from €3,950 - Pallet fork 5 or 8 tons: from €2,190 Available with scales on request: Used scales including installation, e.g. Pfreundt WK 50 or WK 60 from €3,900 (Also available with printer) All prices net export – within Germany plus 19% VAT. We can arrange transport to your location upon request. Sale only to commercial customers or for export. Sold as-is, as seen. No warranty or guarantee. The stated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer, and the details provided do not represent warranted characteristics. The description and information serve solely for general identification of the vehicle and do not constitute a warranty in the legal sense. The details are not guaranteed to be complete. The provided information/descriptions and images are non-binding and do not represent warranted features. Only the stipulations in the order confirmation and invoice are valid. The seller does not assume any liability or guarantee.

Condition: good (used), Year of construction: 2006, Ref:10979 . 2006 Heidelberg Stahl TH82/64-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SBP.D presser/stacker delivery unit. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit (to be confirmed). Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 56cm with 4 plates, perforating/scoring shafts Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Dedpfowxw Snox Apwsut Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h. Option of: 2010 Palamides Alpha 500 Plus Presser/Stacker

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Automatic spindle height and tilt adjustment with decimal increments - Mechanical display for spindle height and electronic display for spindle tilt - Tilting hood with aluminum guides - Adjustable table opening via table slides - System for quick tool change - With long tables featuring extendable workpiece support - Table size: 2500 x 780 mm - Spindle adjustment: -45° to +45° - Spindle diameter: 30 mm - Spindle stroke: 230 mm Dedpow I H Rqjfx Apwout - Maximum table opening: 300 mm - Motor: 5.5 kW with automatic star-delta start - With forward/reverse rotation - Speeds: 3000/4500/6000/8000/10000 rpm - Electronic programming of spindle height, spindle tilt, and fence position (milling fence) - Extraction ports above and below 120 mm Dimensions: 2570 x 1450 mm Weight: approx. 670 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter Dujdey Ih Rgopfx Apwst - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Condition: new, bore capacity in steel 40 mm threading cutting capacity: M30 throat 310 mm bore stroke 175 mm spindle taper MK 4 feed range - spindle 20 - 400 mm/U spindle turning speed range 60 - 1250 / 120 -2500 U/min transmission ratio 2 Stufen column diameter 120 mm table surface area 550 x 400 mm total power requirement 1,5 / 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP Dedpfefg U Tqex Apwout - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever Dusdpfx Aofg U Tpspwot - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch Duedpofg U Tnofx Apwjt - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, DGUV certified until: 05/2027, NEW NEW Baking Decks NEW NEW Model: Modul 5-64 Modular deck oven with ceramic stone base Dodpfx Astp D Thspweut For trays 1 x 40/60 per deck Programmable control with night start function Baking chamber internal dimensions: 630x550x180mm (WxDxH per deck) Stainless steel construction Temperature up to max. 350°C DGUV V3 tested exclusively by us Connection: 400V, 15 kW, 5 x 16A CEE plug Dimensions: 990 x 1000 x 440 mm (WxDxH per deck) Brand new machine & SAB inspected With warranty & spare parts service Water connection 3/4 inch, water drain DN 40 Options: Leasing & rental service Extractor hood with condenser Mobile base frame with tray shelf Proofing cabinet Loader apparatus Manual loader Maintenance contract Delivery service Service package Instruction & commissioning More deck ovens in stock!

Condition: used, Used Winkworth model ZX500-6 stainless steel jacketed z-blade mixer / extruder. Approximate working capacity 500 litre with total capacity 778 litre (product dependent). 304 stainless steel chamber measures approximately 1,090mm long x 956mm wide x 735mm deep. Unit has domed hood/lid with clamps. 304 stainless steel external jacket. Each Z-blade driven by 30kw motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Djdeykn Tfopfx Apwjut

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Dujdpfx Aevvkfdjpwst

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,707 h, travel distance X-axis: 3,090 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 85 mm, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, CNC nesting machining centre manufactured in 2021. This FORMAT4 Profit H80 21.31 features a working area of 3090 x 2100 mm and a powerful 10 kW spindle with speeds up to 24,000 rpm. It includes an 8-spindle drilling head and a 15-position tool changer. If you are looking to get high-quality nesting capabilities, consider the FORMAT4 Profit H80 21.31 machine we have for sale. Contact us for further details. • Main spindle: HSK F63 • Drilling head: DH8 with 8 vertical spindles • Tool changer: 15-position, machine-mounted • Vacuum system: 2 pumps, total 500 m³/h; prepared for an additional 250 m³/h pump • Lubrication: Automatic central lubrication • Table/configuration: • Matrix grid table (phenolic resin) • Extended referencing system with front and rear stop rows • Side stops for flexible panel positioning • Electronic control of 2 stop rows • Control and software: • WoodFlash Control (on-machine station) • F4Nest basic package • Extension for rectangular nesting • Integrated label printing module for nesting • Excel/XML import for job list automation • Remote diagnostics / teleservice via Internet • Remote handheld control terminal • Automatic tool length measurement in Z-axis • Central extraction hood with controlled shutters • Electrical and pneumatic preparation for interpolated C-axis • Condition/usage: • Operating hours: 5,500 h • Operation: Single-shift • Condition: Good technical condition • Service history: Regularly serviced by Felder (authorized service) • Availability: Can be started and demonstrated upon agreement • Notes: Operated using WoodFlash software; nesting optimization via F4Nest modules as listed above Additional equipment • Automatic pusher/offloading unit • Motorized pusher height adjustment • Integrated table cleaning/extraction during offloading • Mobile labeling station with thermal label printer • WoodFlash Control external station (1 external programming station) Dedpfxsy Drrto Apwsut

Condition: used, functionality: unexamined, Complete metal testing and materials testing laboratory Industrial quality assurance/testing laboratory as a complete package A fully equipped professional metal and materials testing laboratory from the industrial QA sector is for sale. The package includes, among others: OES metal analysis, universal testing machine, technical cleanliness analysis according to VDA 19 / ISO 16232, metallography equipment, hardness testing, coating thickness measurement, laboratory scales, water analysis, laboratory devices, extensive Köttermann laboratory furnishings, and consumables. Manufacturers include: AMETEK/SPECTRO, GALDABINI, JOMESA, Struers, Fischer, List, Ernst, Zeiss, KERN, Mettler, IKA, Memmert, Macherey-Nagel, Hanna, WTW, and Köttermann. Key features: - AMETEK / SPECTRO SPECTROTEST TXC02 UV portable OES metal analyzer - GALDABINI QUASAR 100 universal testing machine / tensile tester 100 kN - JOMESA filter analysis system for technical cleanliness in accordance with VDA 19 / ISO 16232 Dedpfx Apsy Rglnsweut - Struers TransPol-5 portable metallographic grinding and polishing system - Struers Rotopol-2 metallographic grinding and polishing machine - Fischer DELTASCOPE FMP30 coating thickness measuring system - List-Magnetik MEGA-CHECK Master coating thickness gauge - Ernst Computest SC portable hardness testing system - Carl Zeiss Jena Neophot metallographic reflected light microscope - Köttermann fume hoods, laboratory benches, hazardous materials cabinets, and chemical cabinets - Extensive laboratory consumables, laboratory glassware, and accessories Complete object description can be found in the documents.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 05/2028, total length: 825 mm, total width: 520 mm, total height: 1,010 mm, input frequency: 50 Hz, power: 2.2 kW (2.99 HP), electrical fuse: 16 A, Spiral kneader Model: ECO 24 Kneading machine with sophisticated and robust technology! LED control Dough machine with 2 timers 2 courses in 10 steps for min/max. 3 to 24 kg of dough Flour dust hood Stainless steel boiler and spiral Machine mobile with 4 brakes DGUV V3 tested Connection 220V, 2.2 kW, Schuko plug Dusdsn Si S Tspfx Apwjt Dimensions: 520 x 825 x 1010mm, WxDxH NEW machine With a 24 month warranty Come to us and see over 400 bakery machines!

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. Duedpsu R Sy Asfx Apwot The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -