Used Wanzke Automatic Punching Press - Double Column for sale (42,206)

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position Lredpfx Aajyz Dr Tezjt - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control Ljdpfx Aok S Htxjazsrt - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Lrodpfx Ajw A Amreazst Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 Lrodpfx Aodzqltjazst - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Lredpfx Asdzqptoazst Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Lodsfim Thspfx Aazert Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Reach: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz - Overload protection by shear plate in the ram - Compressed air coupling-brake combination DESCH - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele - Stroke counter Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Column width 1050 mm Column opening, side 550 mm Table area 1000 x 800 mm Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Drawing cushion stroke 100 mm Through-hole in the table Ø 202 mm Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Working speed approx. 36 mm/sec Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Ljdpfx Aoguvtloazsrt Motor power, control pump 4 kW Motor power, control pump 2.2 kW Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Lrjdpov Srfwsfx Aazet Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Year of construction: 1978, condition: used, pressure 40 t distance between columns 600 mm stroke 150 mm table surface area 600x410 mm ram surface 220x130 mm table height 850 mm weight of the machine ca. 2,5 t Lrjdpfoq Rhkwjx Aazot

Year of construction: 1978, condition: used, pressure 25 t Lredpelp U Arsfx Aazet distance between columns 580 mm stroke 150 mm dayligth 370 mm table surface area 560x400 mm ram surface 400x350 mm hole in the table 80 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 1500x500x2500 m

Year of construction: 1976, condition: used, pressure 100 t distance between columns 625 mm stroke 150 mm table surface area 580x450 mm ram surface 580x340 mm hole in the table Ø 150 mm table height 850 mm tool hole in ram Ø 45 mm column travel -side 200x200 mm weight of the machine ca. ca. 6,0 t dimensions of the machine ca. BxTxH ca. 1300x1300x2750 mm Ljdpfx Aaslp U Euozort

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm Ljdslp Uz Rspfx Aazsrt total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm ram surface 320 mm table surface area 470x400 mm weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm Lsdpfx Aolp Uz Ueazort

Condition: used, pressure 100 t distance between columns 310 mm no. of strokes 80 Hub/min ram - range of adjustment 40 mm table surface area 400x300 mm ram surface 250x190 mm table height 960 mm tool hole in ram Ø 35 mm weight of the machine ca. 1,5 t Lrjdpfolp U Sdex Aazot dimensions of the machine ca. BxTxH 1500x1500x2200 m

Condition: used, Year of construction: 1980, pressure 20 t distance between columns 450 mm Lrodpfx Asvnwd Djazot stroke 100 mm table surface area 440x320 mm ram surface Ø140 mm hole in the table Ø50 mm table height 900 mm tool hole in ram Ø40 mm total power requirement 3 kW weight of the machine ca. 2 t dimensions of the machine ca. BxTxH 1400x1200x2200 mm

Year of construction: 1976, condition: used, pressure 250 t distance between columns 900 mm stroke 300 mm table surface area 850x900 mm ram surface 800x880 mm Lrodpfx Aaolp U A Sozjt stroke 300 mm table height 1050 mm

Year of construction: 1964, condition: used, pressure 40 t distance between columns 450 mm stroke 20-50 mm ram - range of adjustment 60 mm table surface area 370x400 mm ram surface 250x370 mm hole in the table 120x280 mm Lodpslp U Exofx Aazort table height 850 mm weight of the machine ca. 2,5 t dimensions of the machine ca. BxTxH 1600x1300x2800 mm

Condition: used, Year of construction: 1979, machine/vehicle number: 5255, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:540 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm total power requirement:5,5 kW weight of the machine ca.:3 t dimensions of the machine ca.:2,10 x 1,65 x 0,75 m Lsdjcxxu Nopfx Aazort with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: used, Year of construction: 1995, machine/vehicle number: 1830977, pressure:32 t no. of strokes:30 - 1100 Hub/min sheet width:0 - 120 mm table-size:760 x 580 mm feed::SANKYO V76 stroke adjustable from - to:3-50 mm distance between columns (le-ri):800 mm :200 dayligth:235 mm feed length:0 - 76,2 mm hole in the table:670 x 110 mm ram adjustment:50 mm surface area of ram:710 x 410 mm plate thickness:0 - 3 mm band speed:max. 70 m/min control:OP 15 SIEMENS SPS Feeding Angle:165 ° total power requirement:18 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,6 x 1,7 x 2,6 m Lsdpfx Aaecxxrljzort precision machine in 4-column design, Sanyo V76 precision cam feeder, feed direction right to left, with Siemens CNC control OP15, noise reduction cabin, Herion press security valve, central lubrication, emergency cut-off

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min Lsdecxxycjpfx Aazort sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: used, Year of construction: 1985, machine/vehicle number: 751, dimensions of the machine ca.:2,6 x 1,0 x 2,2 m pressure:40 t sheet width:150 mm stroke:8 - 70 mm number of strokes - stepless:60 - 300 min-1 ram surface:340 x 320 mm ram adjustment:70 mm table-size:550 x 580 mm Working width max.:210 mm column travel -side:250 mm hole in the table:400 x 90 mm clamping plate thickness:60 mm boring of tool-holders:Ø 40 x 80 mm groove width:30 mm flute depth:6 mm Lodpfx Aaocxxnmezert distance between columns:560 mm weight of the machine ca.:3,8 t total power requirement:7,5 kW

Condition: used, Year of construction: 1992, machine/vehicle number: 9802, pressure:80 t no. of strokes:100 - 1000 Hub/min stroke:16-63 mm table surface area:970 x 920 mm hole in the table:740 x 100 mm Lrsdpfx Ajh Ra N Rsazot ram surface:760 x 510 mm distance between table / ram:280 mm compressed air:6 - 10 bar :43 kw weight of the machine ca.:15,5 t dimensions of the machine ca.:232 x 125 x 326 m

Condition: used, machine/vehicle number: 8483, pressure:30 t no. of strokes:100-600 Hub/min sheet width:115 mm table-size:450x450 mm Bruderer Double Roll Precision Feed:BBV 190/85 links stroke adjustable from - to:16-40 mm distance between columns (le-ri):330 mm :280 mm dayligth:290 mm Lodpecxxrdofx Aazert inlet width:120 mm feed length:15-80 mm dimensions of switch cabinet:1,1 x 1,2 x 2,2 mm hole in the table:315 x 100 mm total power requirement:5,5 kW weight of the machine ca.:3 t high speed triple-column design, BRUDERER BBV 190-85 feeder on left side, cooler ventilation, swivelling safety gate, pneumatic clutch, manual roll vent. on feeder

Condition: used, Year of construction: 1971, machine/vehicle number: 1967, pressure:30 t no. of strokes:100 - 600 Hub/min stroke adjustable from - to:8 - 40 mm ram adjustment:40 mm inlet width:198 mm mould height - Max./min.:230 - 270 mm roll surface width:110 mm hole in the table:310 x 80 mm Lredpfecxxxmjx Aazst distance between columns (le-ri):330 mm distance between columns (vo-hi):280 mm table height over floor:990 mm column diameter:50 mm voltage:380 V frequency:50/60 Hz control voltage:24 V table-size:475 x 450 mm ram diameter:190 mm total power requirement:0,96 - 5,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1,2 x 1,16 x 2,15 m

Condition: used, Year of construction: 1988, machine/vehicle number: 724306, pressure:63 t no. of strokes:400 Hub/min sheet width:180 mm stroke:10 - 80 mm feed length:150 mm band width:180 mm control:KAISER voltage:380 V Ledpfxjcxxt To Aazort dimensions of the machine ca.:1,85 x 2,70 x 3,00 m double-column machine with double connecting rods with adjustable stroke, electric rpm control, electric tappet adjustment, pneumatic tappet compensation, Imco individual pressure force monitoring device (split right / left), Unidor tool monitoring system, blower device, original Kaiser gripper feeder type ZR 18D, emergency cut-off, electric 2-hand operation, free-standing control panel