Used Wanzke Automatic Punching Press - Double Column for sale (41,626)

Condition: new, neu ca. 4 Monate ab Auftragse Italien 123000 € 2324.7 € Hodpfxoynm I Ae Aazeu 170 to 500 mm 1200x700 mm 600 mm 110 mm/s 7 mm/s 70 mm/s 19 kW 2700 mm 1600 mm 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: used, Year of construction: 2003, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2003 Pressing force: 6,300 kN Stroke rate: 10-45 strokes/min Stroke length: 600 mm Ram adjustment: 200 mm Table area: 4,000 x 1,700 mm Installation height: 1,100 mm Hodpfx Aajz Dxitezou Includes PBK conveyor system.

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Hedpsmpfwdofx Aazou Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: new, pressure 8,0 kN stroke 40 mm throat 90 mm Working height from to 50 - 200 mm table surface area 120 x 160 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the Hsdpfxefv Avke Aazju press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. Hodpfetyqizsx Aazsu In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: good (used), pressure 250 t passage width 700 mm Hodpjxcblwsfx Aazou stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: new, pressure 500 kN stroke 40 mm throat 73 mm Working height from to 60 - 150 mm table surface area 115 x 70 mm weight of the machine ca. 10 Kg .Toggle lever hand press SPECIAL OFFER!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place Hedpfof Nb Exjx Aazou forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring

Condition: used, Year of construction: 2000, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2000 Pressing force: 6,300 kN Stroke rate: 10-45 1/min Stroke: 600 mm Ram adjustment: 200 mm Table area: 4,100 x 1,700 mm Ram area: 4,000 x 1,700 mm Installation height: 1,100 mm Control system: SIEMENS S7 Transfer distance: 0-800 mm Opening/closing distance per slide: 150 mm Lifting stroke: 150 mm Distance between gripper slides in the closed position: 500-1000 mm Hedpfx Asz Dxiaoazsu PBK strip feeding system Strip thickness: 0.2 - 3.5 mm Strip width: 120 - 1,200 mm Coil capacity: 10,000 kg

Condition: new, neu ca. 4 Monate ab Auftragse Italien 164500 € 3109.05 € 260 to 500 mm 1400x1000 mm 600 mm 75 mm/s 5 mm/s 60 mm/s 22 kW 2800 mm Hedpfx Aasynm I Njzou 1650 mm 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Hsdpfx Ajzulx Eoazeu Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm ram surface 320 mm table surface area 470x400 mm Hedpfx Ajlp Uz Uoazju weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Hsdpjxzu Rqsfx Aazeu Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos – Machine is ready for operation Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Condition: new, Year of construction: 2026, Condition: New Machine type: Twin-column bandsaw fully automatic Blade dimensions: 4,240 x 34 x 1.1 mm Cutting capacity (rectangular): 325 x 380 mm Cutting capacity (round): 325 mm Bundle cutting: 190 - 300 x 70 - 140 mm Hodpfeyc Hd Tjx Aazju Cutting speed: 15 - 100 m/min (stepless) Main drive motor power: 3.7 kW Table height: 800 mm Coolant capacity: 75 L (19.8 gal) Clamping force: 18-28 kg/cm² Control method: Hydraulic, NC Automatic Single cut length: 0-403 mm Multiple cut length: 0-9,999 mm Residual piece: 50 mm Weight: approx. 1,950 kg Dimensions (W x D x H): approx. 2,410 x 2,250 x 2,250 mm Standard Equipment: - Touchscreen control - Stepless cutting speed adjustment (frequency inverter) via touchscreen - Up to 100 jobs programmable - Automatic kerf compensation - Double retracting vices - Display for blade height and cutting speed - Blade height encoder - Work lamp - Blade cleaning brush - Coolant gun - Broken blade detection sensor - Hydraulic blade tensioning - Hydraulic carbide blade guide - Hydraulic chip conveyor - Vibration damper - Manual in English - Machine feet - CE Options: - Variable pressure adjustment for clamping jaws - Hydraulic bundle clamping - 2 meter roller conveyor

Condition: used, Year of construction: 2003, Manufacturer: Haulick + Roos GmbH Type: RVD 3000-2500 Machine Type: High-performance stamping press Year of manufacture: 2003 Condition: used Rated pressing force: 3,000 kN Pressing force: 300 t Stroke frequency: 20–180 strokes/min Drive power: 80 kW Ram stroke: 20–160 mm Ram adjustment: 150 mm Tool installation height: max. 450 mm Maximum tool length: 2,500 mm Maximum tool width: 1,000 mm Table area: 2,450 × 1,000 mm Ram area: 2,500 × 950 mm Clamp plate opening: 2,250 × 350 mm Machine weight: approx. 46,000 kg Strip feed direction: right to left Power supply: 400 V Frequency: 50 Hz Maximum connected load: 80 kVA Maximum fuse rating: 250 A Draw cushion: not available Components of the system: Haulick + Roos high-performance stamping press RVD 3000-2500 DIMECO coil unwinder, type 23S1/D/VV Year of manufacture: 2003 Weight: 1,450 kg Maximum load capacity: 4,000 kg DIMECO roller feed, type 1681/17/BVV Year of manufacture: 2003 Weight: 540 kg ARKU straightening machine Hjdpfx Aajzrz Dxozju Technical data for roller feed: Strip width: 5–420 mm Strip thickness: 0.1–5 mm Maximum strip cross-section: 1,000 mm² Strip speed: up to 125 m/min Feed length: 0.1–999.9 mm Feed accuracy: ±0.1 mm Roller diameter: 100 mm Strip height adjustment: 100 mm, manual mechanical Note: The ram guide should be replaced. The system is currently still in operation and functional. A quote from the manufacturer for complete disassembly and installation of new guides is available for approximately €200,000. We will gladly provide videos of the system in operation upon request.

Year of construction: 1981, condition: used, pressure 40 t distance between columns 600 mm stroke 160 mm table-size 560 x 400 mm dayligth 360 mm ram hole 40 H 7 DIN 810 mm oil volume 500 l return speed 200 mm/sec die cushion hydr. pressure/stroke 60 capacity of ejector 25 t Hjdpeb U Hw Tefx Aazou total power requirement 15 kW dimensions of the machine ca. 1.44 x 0.95 x 2.54 m pressing speed 27 mm/sec return speed 200 mm/min

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 745-006-1, total height: 4,050 mm, ram adjustment: 60 mm, total width: 1,650 mm, total length: 3,000 mm, drop-through hole in table: 160 mm, pressing force: 100 t, distance between side stands: 420 mm, overall weight: 16,000 kg, year of last overhaul: 2014, Raster die-cutting machine Stroke rate: 20 - 220 Table area: 700 x 1000 Stroke adjustment: 20 - 90 mm Unidor Compact Press CE 2014, complete system Weight: approx. 16,000 kg Hedpfoz Ekvuex Aazsu Accessories: Raster roller feed Kemmerich strip feeding system Safety fence

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm Hsdpslp Uz Rofx Aazsu pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Condition: used, Year of construction: 1994, Technical details: air pressure - required: 8 bar total power requirement: 14 kW machine weight ab.: 80-170/je Maschine kg MULTIFUNCTION PUNCH PRESS for alloy windows construction 3 pieces: - for Schüco alloy window frame, post and beam profiles S65 - for Schüco alloy wing profiles for alloy window system ROYAL S 55, S 65 and S 70 - for Schüco alloy door profiles Royal S65 door base profiles - foot operation - pneumatic air gun AND - drilling automat for window construction application: Hedpfxou Icyho Aazju - drill automat for door hinge - drill taper: for 8 pcs, usable tools 6 pcs, countersink drills with dia. 11/15mm approx. 80mm long - clamping operation via foot control and drilling via manual - accessories: diverse installation parts i.D. *

Condition: used, Year of construction: 1972, pressure 40 t throat 220 mm stroke 8-88 mm Hedpfxsztfz Ro Aazju stroke - stepless adjustable 30-140 mm ram adjustment 63 mm weight of the machine ca. 2600 t

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Hsdpfozkmi Dox Aazju Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Year of construction: 1980, condition: used, pressure 100 t distance between columns - mm stroke 350 mm table size 1150 x 700 mm total power requirement 11 kW weight of the machine ca. t Hsdpfodlxctex Aazsu dimensions of the machine ca. m - cutting impact dampening - die cushion - without electrical cabinet

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz Hedpfxou Nfmys Aazju total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: foot remote control, For sale is a Mubea / Muhr und Bender BFL 350, a robust combined profile and bar steel shear with punching and notching capabilities. This machine is ideally suited for processing profiles and bar steel, as well as for punching and notching operations. Thanks to its combined design, various processing steps can be carried out with a single machine. Technical data: Manufacturer: Mubea / Muhr und Bender Type: BFL 350 Design: combined profile/bar steel shear with punching and notching capabilities Punching force: 35 t Punching: up to Ø 28 mm with a sheet thickness of 10 mm Punching: up to Ø 23 mm with a sheet thickness of 12 mm Cutting capacities: Round steel: up to Ø 30 mm Flat steel: up to 28 mm Angle steel: up to 90 x 90 x 8 mm Hsdpfoz Ahanox Aazsu Flat steel: up to 150 x 13 mm Flat steel: up to 80 x 16 mm The Mubea / Muhr und Bender BFL 350 impresses with its versatile applications and its solid construction, designed for industrial use. Inspection is possible by prior arrangement. If you have any questions about the machine or would like further information, please do not hesitate to contact us.

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm Hedsu Nfvuspfx Aazju passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping - Fixed left head and automatically adjustable right head with roller conveyor - Servo motor guarantees fast movement and precision via linear guides - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm Hsdpfsy Encwox Aazju If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.