Used Wmt Flat And Plate Processing for sale (39,371)

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 700349718, Online bankruptcy auction – Nenco Food B.V., Berkel en Rodenrijs (NL). Closes Monday 26 October 2026 from 14:00 CET. Viewing Friday 23 October, 10:00–15:00. Bühler SORTEX H SpectraVision optical sorter, year of manufacture 2023 Three-chute optical sorting machine (3 sorting modules of 300 mm each) for grain, pulses and seeds, from a gluten-free flour and dry-mix co-packing plant. Serial no. 700349718. Supplied with chiller and control cabinet. Kdodpfx Aoz H U Rxjcpeu Compressed air: max. 7 bar Set-up: machine on steel base frame, with inspection window and emergency stop Configuration: top section with multiple hoppers; four outlets with hose/pipe connections underneath Dimensions: approx. 182 x 171 x 240 cm Colour: white/grey Condition: used Lot 2. The sorter is part of the complete intake and cleaning section, which is also offered as one combination lot (lot 80). Also in this auction: a Bühler SORTEX Z+ 3B three-channel colour sorter, 2005 (lot 3), a Bühler MTSD 120/120 destoner, 2023 (lot 1), and a Bühler GrainPlus LAGA 05-E cleaning and grading machine, 2023 (lot 43). Bidding online only, after registration. Dismantling and loading are mandatory and carried out by Auction Logistics at the buyer's expense: € 470 excl. VAT for this lot.

Condition: used, mileage: 132,300 km, power: 228 kW (309.99 HP), first registration: 01/2005, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 6x2, wheelbase: 5,170 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 9,720 mm, total width: 2,550 mm, Year of construction: 2005, Equipment: ABS, electric window regulation, trailer coupling, = Additional Options and Accessories = - Digital tachograph - Lift axle - Air suspension Kdsdpfjz Smwwsx Acpsu - Power take-off (PTO) - Radio/CD player - Tow hitch = Further Information = Front axle: Tire size: 385/55 R 22.5; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70 R 22.5; Double tires; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire size: 315/70 R 22.5; Tire tread depth left: 25%; Tire tread depth right: 25%; Suspension: Air suspension Unladen weight: 16,980 kg Payload: 11,020 kg GVWR: 28,000 kg Pump: Yes Water tank: Yes Damage: None

Condition: new, functionality: fully functional, We offer a high-quality BOPP flat film (BOPPFF30040-1000) for industrial processing. Technical specifications: Material: BOPP flat film (PC100) Width: 300 mm Thickness: 0.040 mm Length: 1,000 meters Core: 76 mm Properties: Transparent, stable, and tear-resistant polypropylene film Ideal for packaging, lamination, and label applications High resistance to temperature and humidity Kedpfx Asyw Ib Rocpsdu Availability: Available for immediate delivery from stock. €2.00 per kg for pallet quantities €2.30 per kg for quantities of 10 rolls or more 15% discount for purchasing 1 pallet containing 60 rolls.

Condition: good (used), Year of construction: 2016, Plate heat exchanger, ALFA LAVAL, M6-MFM – used: Kodpfx Aez Sdzgecpodu Price ex works: €950 (net) plus dismantling, etc. Manufacturer: ALFA LAVAL Type: M6-MFM Serial number: 30109-39231 Year of manufacture: 2016 Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: good (used), Year of construction: 2015, Approx. 4–5 units of plate heat exchangers, Hydac, H28A-ST16 – used: Price per unit, ex works: €350.00 (net)! Manufacturer: HYDAC Heat exchanger type: H28A-ST16 Year of manufacture: 2015 Kjdpfjz Sdzyox Acpjdu Material number: 4082764 Production number: SD 23701 Rated output: 231 kW Heat transfer area: 4.65 m2 Minimum length: 96 mm Max. operating pressure: 10.0 bar Max. test pressure: 13 bar Volume, primary side: 6 liters Volume, secondary side: 6 liters Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Year of construction: 2025, condition: used, New: Yes Year of construction: 2025 Power: 4 kW (5 HP) Kdedpfjy Am Tpex Acpeu

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, For sale: a Günther brand curing injector, model PI 9. The machine is fully functional and ready for immediate use. Further details upon request. Payment by cash or in advance. Sale only to commercial businesses. No guarantee, no warranty. Kdodpfxjz Tvkus Acpou

Condition: excellent (used), 2008 CIMC 40FT FLATRACK, FLUSH FOLDING TYPE Stackable Tare weight: 5,100 kg Max. payload: 39,800 kg Max. gross weight: 50,000 kg CSC: 12/2027 = Further information = Kdedpfxe Aawn Ts Acpou Year of manufacture: August 2008 Year of construction: 2008 Model year: 2008 Unladen weight: 5,100 kg Payload: 39,800 kg GVW: 44,900 kg Technical condition: very good Optical condition: very good Please contact Arne Honingh for further information.

Condition: ready for operation (used), Granite – Measuring plate & height gauge TESA – Micro-Hite Ksdpfx Acs Aazamepjdu - Plate dimensions: 3000x1300x350 mm - 2 x tailstock centers / center height 250 mm - Height gauge – TESA Micro-Hite / measuring range up to 600 mm Dimensions: L x W x H 3.3 x 1.4 x 1 meter / Weight approx. 3000 kg Errors and omissions excepted.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: WE173-000000006, total width: 1,350 mm, total length: 2,390 mm, total height: 1,980 mm, overall weight: 250 kg, pressure: 0.3 bar, Industrial HDPE 5000L process cooling tank, 3x 8" outlets either side Choice of 4, price per unit. Kjdpfxeziazws Acpjdu

Condition: good (used), Direct from closed food factory - was used for frying Scotch Eggs. Dimensions to follow. Machine looks identical to Heat and Control HeatWave fryer so we think it was maybe manufactured under licence from Heat and Control. It can be supplied as a system comprising of a large double oil tank system for fresh and dirty oil and a Berief Drum Pre Filter. There is no top hold down belt on this machine. Kedjzmy Aiepfx Acpsdu

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:2 Length: 1200mm Width: 1500mm Height: 3500mm Weight: 7000kg Ksdpfsxhgfmox Acpsdu

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. Kdjdpou Dw I Ejfx Acpeu CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: as good as new (ex-display), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0605.1283, TEMA flat vibrating screen Type OZB 90/360-55. Drive 2x Unbalance P= 2,1 kW. Screen deck width 900mm. length 3,600mm. Including: support frame (as visible in the picture). Is in good condition. Few running hours. Has always been used as a demo/test screen. Available immediately. Kjdeqwclqopfx Acpsdu

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Kdsdpfx Ajz Hd R Iscpou Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. Kdodpfx Aced Tyaajpsu - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Will be shipped within Germany for €90.00 net.

Condition: good (used), Ruhle Model MR 100 380V with 4 blades Kodoz N A Rmspfx Acpedu

Condition: used, plate width 1020 mm plate thickness 4 mm diameter of upper rolls 110 mm total power requirement 2,2 kW weight of the machine ca. 900 Kg dimensions of the machine ca. 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016. Kdodpfx Aez N Hwqjcpju

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg Kedpoz N Hxhofx Acpjdu range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. Kedpfx Acozlbpbspsdu - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 Ksdpfx Acjzlbp Ujpsdu - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: used, Year of construction: 2006, Overview Kjdpfx Ajz Hckmecpodu This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Measuring and marking plate, steel cast gray cast iron, heavily ribbed, STIEFELMAYER originates from a measuring machine with a hand-guided measuring arm high-precision measuring plate with a good surface finish Machine no. 8530979, year of manufacture approx. 1989 Length 5000 mm Width 2000 mm Thickness 350 mm Working height 690 mm Kodpfxjftpl De Acpjdu Plate thickness 40 mm, continuous - 15 adjustable feet - very precise and stable longitudinal guides, screwed to the side of the plate Space requirement L x W x H 5000 x 2120 x 400 mm Weight approx. 7500 kg good surface finish

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Kedsvkw Dvepfx Acpedu Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, 1 brand new hydraulic swing-cut plate shear (unused showroom machine) Manufacturer: LAMI NOVA Model: SC 2006 Max. cutting length: 2100 mm Max. sheet thickness, for normal steel: 6.5 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Cutting speed: 29 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 2670 x 2000 x 1600 mm Kdsdpfx Acjd Ad A Eepsu Weight: 4500 kg Accessories / Special features: • NC control ELGO P 40 as an electronic positioning display for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal • Central shear gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the clamping beam • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics by BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system by SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Delivery time: immediately, subject to prior sale plus additional freight costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel