Used Wmt Flat And Plate Processing for sale (39,594)

Condition: new, For inquiries regarding the adapter plate, Mr. Herden is at your service (by phone). OilQuick OQ80 Adapter Plate / Bolt-on Adapter / NEW / in stock & immediately available Price: €4,990.00 net / €5,938.10 gross Hole pattern drawing available in the photos. - 2x 1/2" couplings - 1x 3/4" polystyrene coupling - 1x 3/4" coupling - 2x 1" couplings - Excavator class: 25 to 43 tons - Weight: 386 kg Suitable for a wide range of attachments, such as hydraulic breakers, sorting grabs, and also for the following Westtech products: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 Ndjdpjy E Et Hefx Ah Soc - Westtech CS610 compact (requires drain line) - Westtech CS580 (requires drain line) - Westtech CS780 (requires drain line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All compatible Westtech products are also in stock and immediately available! We also have many other OilQuick adapter plates available from stock! Mr. Herden (phone) is happy to assist you. We are happy to provide you with a financing offer upon request. We are an official distribution and service partner for: - OilQuick - Holp - Gierking GMT - Weber MT - Westtech - DMS - Seppi M. - Magni telehandlers - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the full OilQuick product range! Errors and prior sale excepted! = Further information = Intended use: Construction Unladen weight: 386 kg Contact Marius Herden for further information.

Condition: used, floor-plate length:3140 mm floor-plate width:1800 mm floor-plate height:100 mm groove width:36 mm no. of flutes:10 flute distance:260 mm Nodpfxs Ad Si Ho Ah Sjdc weight of the machine ca.:4,1 t dimensions of the machine ca.:3140 x 1800 x 100 m

Condition: excellent (used), Face plate and clamping disk (2858) Diameter 440 mm Camlock mounting 133.4 Cone diameter 106.39 Ndjdpfetup Trex Ah Ssc Height of face plate 50 mm Weight 28 kg

Condition: excellent (used), Faceplate Diameter 450 mm Height 110 mm Jaw height 55 mm Large diameter of long taper bore: 100.5 mm Small diameter of long taper bore: 85 mm Ndsdpfxjfhvkvj Ah Sjc Taper length: 73 mm External thread for locking nut: Thread 130 x 4 Keyway: 16 mm

Condition: excellent (used), Splash plate Nodpfx Ajfm Tqreh Sodc Diameter: 500 mm Weight: 68 kg Bolt circle diameter: 134 mm Center bore diameter: 96 mm

Condition: excellent (used), Splash guard Njdpfxjfm Tqzs Ah Ssdc Diameter 390 mm Wheel offset 6 Bolt circle diameter 135 mm Weight 56 kg

Condition: good (used), Splash guard Diameter 405 mm Ndodpfxjfm True Ah Sjc Height 100 mm Bolt circle diameter 84 mm Weight 55 kg

Condition: excellent (used), Clamping plate made of cast iron Length 2000 mm Width 315 mm Njdjd Tcz Sopfx Ah Ssdc Height 90 mm T-slot width 32 mm T-slot spacing 150 mm Diameter of the 12/8 fixing holes 27 mm Solid material

Condition: as good as new (ex-display), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0605.1283, TEMA flat vibrating screen Type OZB 90/360-55. Drive 2x Unbalance P= 2,1 kW. Screen deck width 900mm. length 3,600mm. Including: support frame (as visible in the picture). Ndedpeqwclqjfx Ah Soc Is in good condition. Few running hours. Has always been used as a demo/test screen. Available immediately.

Condition: used, Worm gear for C400 “Wolfking”. Nodpfxjzzcrio Ah Ssdc

Condition: excellent (used), Year of construction: 2009, Salmon Slicer Horizontal / Long Slice Make: Marel Model: HS240 Ndodpfx Ahszzdmbo Sjc 2009

Condition: used, Fish fillet washer Make: Carnitech Model: 1635.20 Ndodpfx Aszzd Ewsh Ssc Spray bars top and bottom

Condition: used, For export only! Ndjdpfez Nf Unox Ah Sjc Heights Titanium 85 plate processing machine.

Condition: used, Year of construction: 2001, 2001 | Volvo FM6229A | Used Flat-bed Truck | 572655 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Ndodsz Iw R Djpfx Ah Ssc 👷‍♂️ Inspected by an independent expert 30 inspection points 22 approved ✅ 8 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition and operation. Gearbox OK. 6x2 towing, full air suspension, Telma, wheelbase 5.25m. Fiault flatbed using power take-off, 8.5 m in length + ramp, 2.53 m in useful width. 2 hydraulic rear stabilizers with independent control. Hydraulic winch without remote control. The rear axle is a lift and steer axle. The steering function is limited or unreliable. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40158 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2023, functionality: fully functional, For sale, located in 45891 Gelsenkirchen, is a Seydelmann Konti cutter, model KK 140 AC-6. The cutter was manufactured in 2023, is used, and comes from a business liquidation. Currently, the cutter is still connected to power and can be inspected by appointment. Nodpfx Aoz Izntsh Sedc We will gladly provide you with the technical specifications upon request if you are interested in purchasing it. Dismantling and loading are the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Equipment: documentation/manual, The Anko HLT-700XL Dumpling Machine, a multipurpose filling and forming machine, has been approved by many clients. By simply changing the forming mold set, the HLT-700XL can produce various foods such as dumplings, fried dumplings, samosas, hargao, and ravioli. With the HLT-700XL, any food maker can easily transform their business to automatic production. Ndodpfxjz I Ax Ho Ah Sec

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, - *Brand: FAMAR S.N.C. Officine Meccaniche - ALBIATE (MI) Italy* - *MODEL: A311 - 15/4* - *SERIES No. 571 - YEAR 1990* - Compliance: MAY 1990 - Art. R.233-69 of the Labor Code (French plate) - Type: Asymmetrical 3-roll bending machine *Features:* - Usable length: *1500 mm* (15 = 15 decimeters) - Thickness: *4 mm max in steel* (15/4 = 1500 x 4) - Rolls Ø ~ 110-120mm, hardened steel - Motorized: rear green motor as seen, 2.2kW Ndodpfez E R Auex Ah Sec - Control: remote control panel *FORWARD / REVERSE + UP / DOWN* (lower roll adjustable) - Weight: *~ 1,250 kg*

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Ndjdpfsd Tyaaox Ah Soc Technical data: Support height - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Will be shipped within Germany for €90.00 net.

Condition: used, plate width 1020 mm plate thickness 4 mm diameter of upper rolls 110 mm total power requirement 2,2 kW Nsdjz N Hwqopfx Ah Ssdc weight of the machine ca. 900 Kg dimensions of the machine ca. 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016.

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine Ndodpfx Ahoz N Hxhe Ssc - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: good (used), Ruhle Model MR 100 380V Nedpoz N A Rmjfx Ah Sodc with 4 blades

Condition: used, For export only! G&J C85 Cleaning Unit Ndedez N Slgspfx Ah Ssc

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) Nedpfx Aju Dw I Eeh Sjdc - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: excellent (used), Marking plate-clamping plate-surface plate Length 1560 mm Width 560 mm Thickness 60 mm Weight 180 kg The plate is heavily tipped on the bottom. Surface is finely planed. T-slot 16 mm Ndodpowaxl Ejfx Ah Ssc

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:2 Length: 1200mm Width: 1500mm Height: 3500mm Nodpfxsxhgfmo Ah Ssdc Weight: 7000kg