Used Zentralspannfutter 1400 for sale (2,126)

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Economical: - Turbo system: 25% higher system performance thanks to state-of-the-art application technology, while maintaining the same footprint! - Reduced cycle times through optimized program automation for fast UV systems Gusdpfx Anozlbq Eoled - Up to 70% cost savings compared to dipping and spraying through the use of solvent-free systems and single-person operation Flexible: - Cost-effective single-person operation with a return function, or alternatively, continuous operation for two-person operation - The PC is scalable

Condition: used, mileage: 33,976 km, power: 100 kW (135.96 HP), first registration: 05/1990, fuel type: diesel, overall weight: 7,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2020, color: red, gearing type: mechanical, Year of construction: 1990, Equipment: air conditioning, all wheel drive, compressor, Unimog U 1400, equipped for dual-mode operation Manufacturer: Zweiweg Torque converter Gsdpoi R Aicjfx Anlsud Wagon braking system, 600 tons Coupler bar mounting at the rear

Condition: good (used), Year of construction: 2004, clamping force: 300 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 679 cm³, injection pressure: 2,000 bar, injection weight: 618 g, mold height (min.): 330 mm, opening stroke: 1,150 mm, plate width: 995 mm, plate height: 1,050 mm, overall weight: 14,300 kg, Robot W 621-ß077 Hot runner control unit IMM 8 Guodpfezixbvjx Anled Control system MC 4

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 950 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, total height: 2,120 mm, total width: 1,770 mm, overall weight: 3,660 kg, spindle speed (max.): 1,800 rpm, product length (max.): 2,290 mm, number of axes: 3, This 3-axis KNUTH KB 1400 was manufactured in 2018. It features a travel of 950 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed range of 30 to 1800 rpm and a table setup area of 1400 mm x 400 mm. If you are looking to get high-quality milling capabilities, consider the KNUTH KB 1400 vertical machining centre we have for sale. Contact us for further details. • Feed • Feed speed X-axis: 18–627 mm/min • Feed speed Y-axis: 18–627 mm/min • Feed speed Z-axis: 18–627 mm/min • Rapid feed • Rapid feed X-axis: 1670 mm/min • Rapid feed Y-axis: 1670 mm/min • Rapid feed Z-axis: 1670 mm/min • Vertical milling head • Throat: 510 mm • Spindle speed (vertical): 30–1800 1/min (rpm) • Quill stroke: 105 mm • Head swivel range: ±30° • Working area • Spindle axis-to-table surface distance: 150–650 mm • Table set-up area: 1400 × 400 mm • Number of T-slots: 3 • T-slot width: 18 mm • T-slot spacing: 100 mm Guedpfx Aezgfiuenlsd • Speed height-adjustment (max.): 1670 mm/min • Coolant pump flow rate: 12 l/min Technical Specification Taper Size SK 50

Condition: excellent (used), color: green, lifting height: 30,000 mm, Year of construction: 2011, operating hours: 2,958 h, Empty weight: 3.490 kg Make of engine: Honda Lifting capacity: 1.400 kg Gsdpfx Anexb Uy Eeljud CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: DE Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Bocker AHK 30/1400 * 2011 * Petrol drive * 2958 working hours * 30-meter hook height * 25-meter horizontal reach * Remote control * 1400 kg lifting capacity * Wheel drive * Includes documents

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, power: 1.6 kW (2.18 HP), type of input current: three-phase, DGUV certified until: 08/2027, NEW NEW Dough Dividers NEW NEW For tension-free and oil-free dough dividing TOP model: Slim 1400 Cylinders and pistons made of high-quality stainless steel Teflon-coated stainless steel container Capacity: max. 1,100 pieces per hour Dough weight range: 200 to 1400 g (depending on dough type) Only available from us, DGUV V3 certified Electronic variable speed and piece counter Connection: 400V, 16A-CEE plug New machine & SAB tested Guodpsrk Eabefx Anljd With warranty + spare parts service Optional: Leasing & rental service - Output conveyor belt up to a maximum height of 1650 mm - Automatic flour dispenser - Circular knitting module - Hopper, 90 kg - Higher underframe - Maintenance contract - Service package - Delivery service - Training & commissioning Many other TOP dough dividers in stock!

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Gujdpfx Aexnqzxjnlsd Coolant device Work light Guideways in good condition without scratches, not worn Machine is in good overall condition with signs of wear commensurate with age. Includes operating instructions Translated with (free version)

Condition: new, Fanuc A16B-1400-0131/11C board, unused, 100% functional. Guodpfei D U Dmex Anljd

Condition: ready for operation (used), Sincron / Calitax 1055-XEHBA pump with Siemens motor - 0.55 kW / 400V / 1400 RPM / 50 Hz, used, normal signs of wear, 100% functional, delivery as per photos. Gusdpex Dwbqjfx Anled

Year of construction: 2020, condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Dunli, axial fan -Type: YMF.A4T-630S-7FIIIS01 -Power: 1.4 kW at 1400 rpm -Voltage: 380 volts -Fan wheel: Ø 630 mm / see photos Quantity: 1 piece available -Dimensions: 805/805/H265 mm Guedpfx Ajylhwgenljd -Weight: 36 kg

Condition: new, Year of construction: 2025, machine/vehicle number: GJ900182, fuel type: diesel, motor manufacturer: Caterpillar C32, General information Field of application: Construction Weights Empty weight: 11.481 kg Functional Generator capacity: 1.400 kVA Dimensions of cargo space: 667 x 245 x 279 cm CE mark: yes Other information Fuel consumption: 217,4 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Guodpfxsxxn Rxs Anlsd RATING TYPE STANDBY: Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Godpfxozc Nwve Anloud Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: used, Year of construction: 2003, functionality: fully functional, The conveyor belt from the company RAU is available for sale, twice; the price is per unit. Feed length: 1600mm Inclined belt: 1400mm Discharge: 500mm, discharge height: 1200mm Usable width: 400mm Mobile Guide plate: 100mm Belt speed: 4/min Guedpfjzg Dlusx Anled

Condition: used, functionality: fully functional, power: 13.3 kW (18.08 HP), fuel type: gasoline, color: orange, overall weight: 350 kg, tire condition: 70 %, Year of construction: 2012, Used rotary cutting machine for creating conical bevels on manhole covers, in good, working condition. Gsdpfx Aezg Ulfonleud

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: Gedpfx Anozg Dx Ueljud NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: used, Year of construction: 2007, operating hours: 71,393 h, functionality: fully functional, machine/vehicle number: 61010638, clamping force: 3,000 kN, We are offering this used KraussMaffei KM 300-1400 CX injection molding machine, manufactured in 2007. Manufacturer: KraussMaffei Model: KM 300-1400 CX Year of manufacture: 2007 Gujdpfozky Nqox Anlsd If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1963, functionality: fully functional, Single-Column Vertical Turret Lathe | Jungenthal DK 1400 The machine was overhauled in 1996, recently cleaned, and is in good condition. - Faceplate diameter: 1,200 mm - Swing diameter: 1,500 mm - Turning height: 1,300 mm - Cross slide travel: 800 mm - Side slide horizontal traverse: 550 mm Gsdpsyft Ahsfx Anloud - Heidenhain Positip 855 digital readout - New operator panel - Various accessories Inspection is possible at any time by appointment.

Condition: used, Year of construction: 1995, Used machine Gujdpjwka Hlefx Anljd Year of manufacture: 1995 Equipment and technical data: efficient: - Turbo system: 25% higher system performance thanks to state-of-the-art application technology, all with the same space requirements! - Reduced throughput times due to optimized program automation for fast UV systems - Up to 70% cost savings compared to casting and spraying, thanks to the use of solvent-free systems and single-operator control flexible: - Cost-effective single-operator operation with return function or, alternatively, continuous operation for two-person operation - Expandable: The system can be upgraded with additional roller, smoothing, or sanding units ergonomic: - Simple operation thanks to ergonomic controls service-friendly: - Cleaning cycle and quick-change system process-safe: - Top-quality surfaces, precisely reproducible Included: - Roller conveyor, 2000 mm long - ELX 1400 roller conveyor - Bar conveyor, 3000 mm long - UV drying tunnel, 1 lamp 60/80/120 W Working height: 850 - 950 mm Application roller, rubberized: D=238 mm Dosing roller, chrome-plated: D=174 mm Passage height: 3–120 mm UV lamp module: 80/120 W mercury Connected load: approx. 21 kW Dimensions: 1300 x 3080 mm Availability: short notice Location: Röllbach

Condition: good (used), Year of construction: 1982, functionality: fully functional, Single-column vertical turning lathe | Dörries VCE 1400 The machine was overhauled in 2010 by Hering, has recently been cleaned, and is in good condition. - Table diameter: 1,000 mm - Swing diameter: 1,400 mm - Turning height: 1,100 mm - Siemens CNC control type 840 D Shop Turn - Tool changer - X-axis travel: 2,000 mm - Z-axis travel: 700 mm Guodpfjyft Nnox Anlsd - Slide adjustment: 1,000 mm - Rapid traverse: 6,000 mm/min - Spindle speed: 500 rpm - Handwheel - Total power requirement: 62 kW Inspection possible at any time by appointment. #Tags: Doerries | VCE1400 | Dörries VCE

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition . Gjdpfx Ajvi Hryenleud

Condition: used, functionality: unexamined, mileage: 5,100 km, operation weight: 32,000 kg, Year of construction: 2007, operating hours: 8,000 h, Powerscreen Chieftain 1800 Double-Deck Screen 2007 Double-deck - 3 fractions, the screen for sale will have an additional fourth conveyor Two independent sieves for improved screening of fine fractions Guodpszii Tiofx Anled Upper deck area 4800x1350 mm Lower deck area 4200x1350 mm Capacity up to 200 tons per hour with a fraction of 0-31-63 mm Maximum material inlet 100 mm Hydraulically opening grate on the hopper CAT 100 HP engine Weight 34 tons

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,400 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,400 kg, total height: 2,492 mm, total length: 4,367 mm, total width: 3,070 mm, table length: 1,500 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Gsdpfjrg Htpjx Anleud Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: new, power: 25 kW (33.99 HP), travel distance X-axis: 1,430 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 640 mm, workpiece weight (max.): 1,200 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 2,900 mm, total length: 4,855 mm, total width: 2,945 mm, overall weight: 11,000 kg, Equipment: CE marking, documentation/manual, LAGUN L 1400 machining center – available for immediate delivery The LAGUN L 1400 machining center stands for high precision, robust design and economical production. Ideal for single-part production as well as series production in mechanical engineering, mold making and contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / lease-purchase possible ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics and durable machine concepts. The machining centers impress with their reliability, easy maintenance and low operating costs. Technical equipment: Control: HEIDENHAIN TNC 7 digital control HEIDENHAIN TFT screen 16" HEIDENHAIN motors, measuring systems and electronic handwheel HR 510 Chip disposal: Chip conveyor Preparation: Preparation for 4th axis (rotary table) Enclosure: Full enclosure with side-opening viewing windows Accuracy: Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Gsdpfshy Atfox Anloud Contact us – we will be happy to advise you and create an individual offer for you.

Condition: excellent (used), Year of construction: 1998, operating hours: 1,227 h, overall weight: 4,800 kg, fuel type: diesel, tank capacity: 1,000 l, color: grey, power: 280 kW (380.69 HP), output current: 504 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 280 kW (380.69 HP), nominal power (apparent): 350 kVA, total length: 4,500 mm, total width: 1,600 mm, total height: 2,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Iveco, type of cooling: water, We have a used emergency power generator/grid replacement system for sale with the following technical specifications: Condition: Used, fully functional, inspected Engine: MTU 12V396 (used in ships, locomotives, tanks, and industrial generators) Rated power: 1250 kVA / 1,000 kW Speed: 1500 rpm Frequency: 50 Hz Rated voltage: 231/400 V Operating hours: approx. 287 hours (emergency power operation) - Includes batteries - Includes diesel tank - Includes circuit breaker - Includes new control system (island operation) - Includes engine cooler - Upon request and for an additional charge, the control system can also be synchronized for grid-parallel operation with load distribution and emergency power operation. Seamless integration into your energy infrastructure. Dimensions: 500x180x200 cm (L x W x H) Weight: 8,500 kg The emergency power generator will be delivered in an operational condition, including a documented load test lasting 60 minutes. Upon request, the generator can also be installed in a soundproof 30-foot container as a compact all-in-one unit. Delivery, installation, and commissioning are possible for an additional charge. Prices (net): - €58,000 per unit (without container) Guodpfx Ajt Agwxenlod - €69,000 per unit (including container installation) Further offers can be found at:

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis Gjdpfx Ajuni D Ejnloud 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.