Used Optiflex B for sale (39,209)

Condition: good (used), Year of construction: 2014, Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Njdezbyn Nspfx Abuolh Serial numbers: 14/0558 and 14/0557 Each unit includes 1 Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,500 kg Dimensions according to documentation: approx. 3,741 x 1,718 mm and height approx. 2,800 mm (including operating light, which can be unscrewed). For carton dimensions: 600 x 400 x 400 mm (can be changed with a different tool). 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: used, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Nlodpozlivpofx Abush Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: DEK-1807003, working width: 320 mm, total width: 900 mm, input frequency: 50 Hz, input voltage: 380 V, total length: 3,500 mm, type of input current: three-phase, eisenkolb DEKO-2000 Nodpfx As Abar Rebuolh Curtain ironing table with preheated rotating surface and steam extraction The ergonomic design of the ironing surface, angled at 6 degrees, with weightless suspension/guidance of the iron, prevents fatigue and RSI (Repetitive Strain Injury). Rotating, electrically thermostat-controlled, heated, and rotating ironing surface measuring 320 x 60 cm, with steam extraction and pedal control. Power consumption according to the manufacturer: 2,000 W The ironing surface can be moved forward or backward using a foot pedal, making it easy to transport an ironed curtain. Vacuum function for optimal steam ventilation and improved ironing results. Fabric trays at the front and rear to keep the curtain clean. Technical specifications: Dimensions: 350 x 90 cm Electrical: 380 V, 3-phase, 2000 W Inspection possible by appointment. Collection in 58239 Schwerte.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020012.010, total height: 870 mm, total width: 750 mm, total length: 1,400 mm, Equipment: documentation/manual, COMMERCIAL SALE As part of the liquidation of a company, we are selling the following used packaging machines. All machines offered are fully functional and were used in ongoing operations until recently. If you have any questions about the individual machines, possible combinations, or further details, please do not hesitate to contact us. Delivery and collection are possible by arrangement. Location: 41564 Kaarst-Holzbüttgen 1. & 2. Simons+Harren carton sealer NH-FJ-2 Two identical semi-automatic carton sealers, type NH-FJ-2 - 1x manufactured in 2020 - 1x manufactured in 2018 Technical data (both machines): - Operation: manual / pneumatic, 230 V - Sealing: Tesa adhesive tape - Dimensions: L 1,160 x W 970 x H 750 mm - Carton sizes approx.: L 150–∞ x W 120–470 x H 120–450 mm Price, manufactured in 2020: 3,000 EUR net Price, manufactured in 2018: 2,500 EUR net 3. Youngsunpack carton sealer MHFJ1AB (2013) Semi-automatic, 230 V, Tesa adhesive tape Dimensions: L 1,100 x W 770 x H 700 mm Carton sizes approx.: L 150–∞ x W 120–480 x H 120–480 mm Price: 1,000 EUR net 4. Heripack HV-TX52.B (2018) Semi-automatic carton sealer / bottom closing machine 230 V, Tesa adhesive tape, automatic format adjustment Dimensions: L 1,400 x W 750 x H 870 mm Price: 2,700 EUR net 5. Simons+Harren bottom flap folding machine CF-10T (2017) Pneumatic side gusset folding machine Dimensions: L 1,400 x W 750 x H 870 mm Carton sizes: L 200–600 x W 150–480 x H 120–500 mm Price: 1,700 EUR net 6. Heripack bottom flap folding machine HB-Sonder (2020) Pneumatic/electric, side gusset folding machine Optimized for combination with item 4 (HV-TX52.B) Dimensions: L 1,650 x W 740 x H 750 mm Carton sizes approx.: L 150–800 x W 110–400 x H from 90 mm Price: 2,500 EUR net (Particularly attractive as a set with HV-TX52.B) Nsdpoz S Hwvefx Abuolh All machines are available individually.

Condition: used, Year of construction: 2013, operating hours: 33,559 h, spindle speed (max.): 7,000 rpm, overall weight: 9,800 kg, CNC Lathe Manufacturer: DMG MORI Model: SPRINT 50 3T+B Year of manufacture: 2013 Technical details: Spindle speed: 7,000 rpm Machine weight: approx. 9.8 t Spindle hours: approx. 48,437 h Operating hours: approx. 33,559 h Condition: Used Available from December 2026 Accessories, tools, and work-holding devices shown are included in the scope of delivery Nedpe Advfrsfx Abujlh only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Hilge F&B Hygia IIK Centrifugal pump Nedpo Ad Rcfjfx Abuelh Single stage end suction hygienic centrifugal pump, designed for sterile and sanitary process applications, flow rate 60 m3h, 2900 min -1, with brand new ABB 7.5Kw motor, 95mm inlet and outlet, 3Ph

Condition: used, functionality: limited functionality, overall weight: 2,100 kg, workpiece diameter (max.): 70 mm, spindle diameter: 54 mm, type of input current: three-phase, spindle speed (max.): 114 rpm, spindle speed (min.): 24 rpm, roll width: 160 mm, stroke length: 15 mm, SENY D-75-B – Hydraulic Thread Rolling Machine – 220 kN For sale is a fully functional hydraulic thread rolling machine from the Spanish manufacturer SENY, model D-75-B, with a maximum rolling force of 220 kN. Due to operational changes, the machine has been taken out of service and is no longer in productive use. However, it is still operational and can be inspected and demonstrated under power after prior appointment. The machine is designed for chip-free cold forming of external threads, as well as for knurling and profile rolling operations. The thread rolling process enables the production of high-strength threads with very good surface quality, without removing material. Technical data General information Manufacturer: SENY Country of manufacture: Spain Type: D-75-B Factory number: 327 Nledpfxoz Sl Arj Abush Machine type: Hydraulic thread rolling machine Year of manufacture: Unknown Operating voltage: 380 V three-phase Rolling capacity and machining range Maximum rolling force: 220 kN (approx. 22.4 t) Workpiece diameter: 3–70 mm Maximum thread pitch: 6 mm Maximum knurling pitch: 2.25 mm Maximum rolling width: 160 mm Rolling spindles Rolling diameter: 133–170 mm Rolling spindle diameter: 54 mm (standard version) Rolling spindle spacing: 135–230 mm Rolling spindle speeds: 24 / 30 / 38 / 45 / 62 / 72 / 90 / 114 rpm Hydraulics and feed Hydraulic roller feed Maximum working stroke: 15 mm Feed speed: 0.5–6 mm/s Adjustable rolling time: 0.1–100 seconds Adjustable pause time: 0.1–100 seconds Hydraulic oil tank: approx. 130 liters Drive power Main motor: 5.5 kW Total electrical power consumption: approx. 8.6 kW Weight Machine weight: approx. 2,100 kg Condition and scope of supply Used industrial machine Fully functional Taken out of service due to operational changes Machine is still operational Inspection and demonstration under power possible after prior appointment No thread rolling tools or rolling sets included in the scope of supply Possible applications The machine is particularly suitable for the production of external threads on screws, bolts, threaded rods and other cylindrical workpieces. In addition, knurling and profile rolling operations are possible with the appropriate tools. The robust machine design and hydraulic feed enable use in both single-piece production and series production. Inspection and further information The machine can be inspected and demonstrated under power after prior appointment. Further information and pictures are available on request. Note: The technical data is based in part on manufacturer and comparative documentation of the SENY D-75-B series. Deviations due to the year of manufacture or design may occur. All information without guarantee. Subject to prior sale.

Condition: good (used), Year of construction: 1989, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, input current: 6 A, pressing force: 30 t, compressed air connection: 6 bar, input frequency: 50 Hz, Equipment: compressor, documentation/manual, safety light barrier, We are offering this well-maintained Baier Geba 45/B foil printing machine, manufactured in 1989, for sale. Type: Geba 45/B Serial number: 89075 Nlsdez R Ru Ropfx Abush Nominal voltage: 380 3/N/PE ~ V Frequency: 50 Hz Current: 6 A Max. pressure: 6 bar Heating: 480 W Printing force: 30 kN Max. strokes per hour: 9900/h Wiring diagram no.: 541300 16 3 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B + Trackmotion 2.9 meters, complete, like new, DTC 7 hours, 2019 DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Nledpfx Aboz Tacneuoh

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Nodpfx Ao Aa Im Tsbuolh Type FB 125 b Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: good (used), Year of construction: 1998, functionality: fully functional, magnetic sign, 170x450mm Clean and well-maintained, with a paper filter. Nsdpfx Aezicflebuslh

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B robot, fully equipped with options. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two renowned robot manufacturers, ABB and Fanuc. Nodpfxjz Tac Us Abujlh

Condition: used, Year of construction: 2012, The machine is designed for the production of: • Stand-up pouches (Doypack / SUP) with bottom gusset • Three-side seal pouches (3SS) • Flat pouches • Bottom-gusseted pouches with shaped bottom contours Technical Data: • Machine length: 16,900 mm • Machine width: 5,500 mm • Machine passage width: 800 mm • Operating voltage: 400 V, 50 Hz, 3-phase • Control voltage: 24 V DC • Power rating: 125 kW • Current: 235 A • Maximum web feed speed: 3.0 m/s • Maximum output: 150 cycles/min • Maximum output with stacking system: 130 cycles/min • Main operating side: left-hand side in the direction of web travel Production Capabilities • Three-side-sealed pouches • Stand-up pouches • Pouch width: 90–340 mm • Pouch length: min. 80 mm; max. 375 mm (two lanes), max. 750 mm (single lane) • Bottom gusset depth: 20–75 mm • Processable materials: PET/PE, PA/PE, PET/ALU/PE • Film thickness: 80–250 µm Equipment • Shaftless unwind stand with web edge control • Height-adjustable unwinding position • Unwind stand for 152 mm cores • Maximum clamping width: 1,600 mm • Maximum roll diameter: 1,200 mm • Bottom-gusset strip unwind stand with web edge control • Bottom-gusset strip unwind stand for 76 mm cores • Maximum clamping width for bottom-gusset strips: 450 mm • Maximum roll diameter for bottom-gusset strips: 1,000 mm • Dancer system for roll changes during machine operation • Fine-dust extraction for bottom-gusset strips • Hot embossing station Nedpjz Szcyjfx Abujlh • Sealing presses with cooling, complete sealing process • Bottom-contour punching unit and bottom opener • Punching-knife holder for 310 mm wide knives • Bottom pre-opening unit with additional embossing function • Longitudinal edge trimming with additional punching unit • Six knife holders with trimming blades replaceable during production • Suction conveyor with three waste-removal rollers for punched corners • Pouch stacking unit with lateral discharge conveyor • Reject diverter into a mesh container • Swivelling packing table • Carton sealer and roller conveyor • Matho central extraction system for punching waste • Extraction of bottom-hole, corner and bottom punching waste • Edge-trim extraction with shredding function • Waste collection in a Big Bag

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Drilling capacity in steel: 35 mm Overhang: 300 mm Drilling stroke: 116 mm Feed stages: 3 Feed rate range: 0.1–0.3 mm/rev Tool holder: ISO 30 Column diameter: 130 mm Table dimensions: 480 × 400 mm Distance from spindle to table: 10–600 mm Nlodo Adzpvepfx Abush MACHINE DETAILS Machine type: Bench drill press Manufacturer: Metalik Model: PK035A/B Dimensions (L × W × H): 700 × 600 × 2,200 mm Weight: 400 kg

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,650 kg, spindle mount: MK 6, L&Z Lathe Weiler Commodor B The machine has been cleaned and inspected by us. It runs smoothly; measured runout is < 0.01 mm. Upon request, a coolant system and tool guard with a microswitch can be retrofitted. For sale only to businesses as defined in § 14 BGB. Technical data: Year of manufacture: 1987 Turning length: 1000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed: 25 - 2000 rpm Spindle bore: Ø 56.0 mm / MK6 Tailstock quill: MK 4 Quill stroke: 150 mm Bed width: 310 mm Nlodpoz A Ah Refx Abush Spindle mounting: DIN 55027 Size 6 Feeds - longitudinal: 0.022 - 0.8 mm/rev Feeds - transverse: 0.011 - 0.4 mm/rev Threads: M 0.3 - 10.0 mm Operating voltage: 380 V Total power consumption: 4 kW Weight approx. 1650 kg Accessories: • 3-axis digital display • Multifix quick-change tool holder B • 3-jaw chuck Forkardt 200 • 4-jaw chuck Röhm • Operating manual • Chip tray with integrated coolant pump for connecting a coolant system • Various accessories (set of soft jaws, turning tools, etc.)

Condition: used, Year of construction: 2017, operating hours: 1,452 h, functionality: fully functional, machine/vehicle number: Roboter: 2600-107871 / Steuerung: 2600-107871, overall weight: 417 kg, load capacity: 12 kg, arm reach: 1,850 mm, ABB industrial robot featuring an IRB 2600-12/1.85 Type B manipulator and an IRC5 Single controller, designed for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. It has a payload capacity of 12 kg and a reach of 1850 mm. Manufactured in 2017, it has 1452 operating hours and is running RobotWare Version 6.04.01.00. It is equipped with two cable sets for power and control connections, a FlexPendant DSQC 679 teach pendant, a transport frame/mounting base located under the manipulator, and the software options World Zones, Path Recovery, and Collision Detection. Nlsdpfx Aszak Htjbuoh

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki lathe Njdpfoypb Nkox Abuslh DOUBLE TURRET Model ZL-45 B Year 1991 CNC Fanuc Sold complete With documentation With chip conveyor

Condition: good (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, Hezinger B 06 - 4000 hydraulic guillotine shear, Njdpfxjyxgbxe Abuelh year of manufacture: 2024, NC control ELGO P 40 T with touch screen, sheet thickness at 400 N/m²: 6 mm, sheet thickness at 700 N/m²: 4 mm, cutting angle: 1.5°, stroke rate: 13 / min, throat depth: 250 mm, 18 hold-downs, backgauge: 1,000 mm, traversing speed: 80 mm/s; accuracy: +/- 0.1 mm, cutting gap adjustment, cutting length limitation, controlled backgauge, cutting line illumination with shadow, max. cutting capacity: 6 mm, max. hydraulic pressure: 220 bar, machine weight approx. 11,000 kg, max. cutting length: 4,000 mm,

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm Nedpfx Ajz Il E Aobuslh T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected power: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vise shown in the photos is not included. External reference: Schönichen - Lot 23

Condition: used, Year of construction: 1987, Max. working width: 630 mm Number of knives: 4 pcs Knife shaft: Tersa knife shaft Motor brake: Yes Nledpfx As Aaq R Isbush Max. planing height: 240 mm Min. planing height: 3 mm Max. material removal: 8 mm Thickness table adjustment: electric/manual & fine adjustment Thickness gauge display: mechanical digital display Feed speed, fixed: 6/18 m/min Thickness table spindles: 1 large Infeed rollers: Steel, toothed Outfeed rollers: Steel Weight approx.: 900 kg Motor power: 5.5 kW Dust extraction diameter: 150 mm Location: Customer

Condition: ready for operation (used), functionality: fully functional, Pipe bending machine from Amga. Nodpfez Szfhex Abuelh Includes tools.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Nljdpjz Il Haofx Abueh Positional accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vise shown in the photos is not included. External reference: Schönichen - Lot 25

Condition: used, Year of construction: 2022, operating hours: 1,700 h, Panel dividing saw Nledpj Abaqyjfx Abujh Manufacturer: Homag Type: Sawteq B-200 Optimat HPL200/38/22 Year of manufacture: 2022 Technical data - Cutting length: 3800 mm - Width of feed table: 2200 mm - Number of clamping devices: 7 - Feed rate: max. 80 m/min - Stepless feed rate - Panel thickness: min. 9.5 mm - Saw blade overhang: 95 mm - Saw blade diameter: max. 380 mm - Main motor: 9.2 kW - Scoring saw - Labeling manually via HOMAG PICA - Control system: CADMATIC 5, Homag POWER CONTROL V2 - CE marking - Operating hours: 1700h Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2004, turning diameter 320 mm turning length 305 mm Nlodpfxoz Icz Uj Abush control Fanuc weight of the machine ca. 3500 kg

Condition: excellent (used), Fully automatic pallet wrapper with film pre-stretching Inventory No. 3974 Nedpfx Abez Rq Rwjuslh Manufacturer: Matco Type: B 200 * Year of manufacture: 2016 * Turntable positioning via fixed stop * Number of bottom and top wrapping cycles * Turntable diameter: 2000 mm !!!! * Max. wrapping height: approx. 2700 mm !! * Own weight: approx. 550 kg * Very good condition * Suitable for Euro pallets and block pallets!!! * Ramp