Used Spinner 1800S for sale (1,829)

Condition: used, machine/vehicle number: 007234, Max. panel width: 900 mm Max. panel length: 1200 mm Bwodpfxjwlpnnj An Nsn Length of conveyor: 8000 mm Panel return for edgebander: Left

Condition: excellent (used), Year of construction: 2003, Engel ES 1800/300 HL-V Clamping force 300 tons Year of manufacture 2003 Screw 70 mm Bjdoww Nu Eopfx An Njwn Max shot volume 1039 cm³ Core pull x3 Including robot

Condition: excellent (used), Year of construction: 1999, Engel ES 1800/350 HL Year of manufacture: 1999 Clamping force: 350 tons Bwodpfxsxvtnqs An Nen Screw diameter: 60 mm

Condition: used, machine/vehicle number: 007802, Max. panel width: 1000 mm Max. panel length: 2000 mm Bedjxn Nf Nopfx An Nown Length of conveyor: 8200 mm Panel return for edgebander: Right

Condition: good (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, The machine was used for reducing waste wood, with little usage. Exchange basket is available. Knives are new. Runs very reliably. Good quality wood chips. Loading included. Bwsdpfxoy Ulyxj An Non

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm Bwsdpfxoy Tplie An Nen sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA Accessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Bodpfxoy D Rypo An Nswn Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Live tooling capability Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: used, Westtech Woodcracker W600 W820 W1000 W1350 W1800 Log Splitter Tongs Available immediately Westtech Woodcracker W600 - Jaw opening: 620 mm - Splitting force at 240 bar: 26 t - Dead weight (basic version): 295 kg - Recommended oil flow rate: 25–60 l/min - Recommended operating pressure: 190–250 bar - Carrier vehicle operating weight: 6 t - Optional: Autospeed valve - Optional: Rotator Bjdpfoyfqc Sex An Njwn Westtech Woodcracker W820 - Jaw opening: 820 mm - Splitting force at 240 bar: 26 t - Dead weight (basic version): 360 kg - Recommended oil flow rate: 25–60 l/min - Recommended operating pressure: 190–250 bar - Carrier vehicle operating weight: 10 t - Optional: Autospeed valve - Optional: Rotator Westtech Woodcracker W1000 - Jaw opening: 1040 mm - Splitting force at 240 bar: 26 t - Dead weight (basic version): 580 kg - Recommended oil flow rate: 40–80 l/min - Recommended operating pressure: 190–250 bar - Carrier vehicle operating weight: 14 t - Optional: Autospeed valve - Optional: Rotator Westtech Woodcracker W1350 - Jaw opening: 1370 mm - Splitting force at 240 bar: 34 t - Dead weight (basic version): 950 kg - Recommended oil flow rate: 80–150 l/min - Recommended operating pressure: 220–270 bar - Carrier vehicle operating weight: 20 t - Optional: Rotator Westtech Woodcracker W1800 - Jaw opening: 1830 mm - Splitting force at 240 bar: 50 t - Dead weight (basic version): 1990 kg - Recommended oil flow rate: 100–190 l/min - Recommended operating pressure: 240–300 bar - Carrier vehicle operating weight: 20 t - Optional: Rotator Various versions and adapter plates available Price on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction equipment sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We can supply the complete range of Westtech Woodcracker products for you! Rental available = More information = New: Yes Please contact Tobias Ebert for further information.

Year of construction: 2014, condition: like new (used), functionality: fully functional, Hilltip floor sweeper (combined with the Hilltip hydraulic power unit): Width: 180 cm Diameter: 50 cm Weight: 180 kg Hilltip hydraulic power unit (also in mint condition, unused, fully functional): Model: HPU18 (built in 2013) Motor: 18 HP (13.4 kW) Voltage: 12 VDC Bjdpfjwiww Sox An Nown Weight: 190 kg

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Westtech Woodcracker W1800 Log Splitter Grapple / incl. RTW28 Rotator / NEW machine / in stock & immediately available - Jaw opening (mm): 1,830 - Splitting force at 240 bar (t): 47 - Own weight (basic - full equipment) (kg): 1,990 - Recommended oil flow (l/min): 100 - 190 - Recommended operating pressure (bar): 240 - 300 - Carrier vehicle weight (t): 25 - 35 Equipment: - Incl. RTW28 Rotator We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / and more...) in stock and immediately available. Our warehouse holds a wide selection of various Westtech products, ready for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. Upon request, we are pleased to provide you with a financing offer. We are an official distribution and service partner for Westtech. We are an official distribution and service partner for OilQuick. We are an official distribution and service partner for Holp. We are an official distribution and service partner for Magni telehandlers. We are an official distribution and service partner for DMS. We are an official distribution and service partner for Gierking GMT. Bodpjyrw Stsfx An Nown We are an official distribution and service partner for Weber MT. We are an official distribution and service partner for Seppi M. We are an official distribution and service partner for JCB construction machinery. We are an official distribution and service partner for Mercedes-Benz. We are an official distribution and service partner for Iveco. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We can supply the full range of Westtech Woodcracker products for you! Subject to errors and prior sale! = Further information = New: Yes Application: Construction Contact Marius Herden for further information.

Year of construction: 2000, condition: ready for operation (used), Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available. Bodpfxetk Rwto An Newn

Condition: like new (used), Year of construction: 2022, operating hours: 942 h, functionality: fully functional, turning length: 600 mm, turning diameter: 230 mm, spindle motor power: 22 W, spindle speed (min.): 50 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, rotational speed (min.): 50 rpm, bar passage: 65 mm, total height: 2,100 mm, total length: 5,000 mm, total width: 2,200 mm, overall weight: 8,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​8-axis CNC lathe "DN Solutions mod. PUMA TT1800SY" with motorized upper turret equipped with Y axis, motorized lower turret, opposing spindles and DN Solutions-Fanuc i-Plus iHMI CNC. Bjdpfx Anjwuqp Ej Njwn

Condition: good (used), Year of construction: 2020, operating hours: 2,125 h, load capacity: 2,000 kg, fuel type: electric, empty load weight: 600 kg, mileage: 2,125 km, Electric ride-on pallet truckBrand: STILL (Germany)Year of manufacture: 2020ONLY 2,125 hoursFork length: 1,800 mmCapacity: 2,000 kg2020 gel maintenance-free batterywith INTERNAL charger Bwsdpfx Anjx Hyx Ho Nen

Condition: excellent (used), Year of construction: 2019, turning length: 700 mm, spindle bore: 76 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 720 mm, Twin spindle construction Twin turret configuration with Y Axis (Y-Axis Cutting complex shaped work piece) Build in Spindle motor High Rigidity BMT Turret Full C-Axis 360.000 Slant bed construction 45 Gr Please note Pictures is example not orginal picture ! Max. turning Ø: 290mm X-Axis: 165/195mm Y-Axis: 100mm Z-Axis: 700/720mm B Axis: 668° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 76mm Subspindle power: 22kW ATC / revolver: 12 Bwsdpfx Ansx I Nike Non Speed live tools: 5000Rpm Positions lower revolver:12 Speed live tools: 5000Rpm Power live tools: 6kW Chip conveyor: Yes Tool eye: Yes Length: 3800mm Width: 2000mm Height: 2100mm Weight: 8500kg

Condition: used, Year of construction: 2004, machine/vehicle number: M336, Used Sidel filling Combiblock for PET 18000 BPHTechnical Specifications & Performance DataThis Filling Monoblock Combi integrates blow molding, gravity filling, and capping within a single compact platform for high-efficiency PET beverage production. Manufactured by Sidel with precision engineering, the system combines a rotary blow molder, a gravity filler, and an Arol capping turret to minimize footprint, reduce handling, and improve overall line efficiency. It is an excellent choice for a used bottling line or second hand industrial packaging upgrade focused on beverage production with PET containers.Configuration: Combi monoblock for blowing, filling, and cappingManufacturer: Sidel (capper by Arol)Blow molder: Sidel SBO 16 Series 2, rotary, 16 molds (molds not included)Filler: Sidel ALSIM gravity filler with 63 valves, mechanical valve typeSpeed: 18.000 BPH on 2L, 23.000 BPH on 0,5LCapper: Arol, 12 heads, pick & place cap distributionYear of construction: 2004 (blow molder and filler)Rotation direction: CounterclockwiseHygienic features: Pressurized cabin with filters on the fillerUtilities/options: Air recovery system present; no chiller includedNeck/cap compatibility: Alaska neck handling; pre-threaded plastic caps including HEXALITE tethered GME30.28 NCB PT 1.00gContainers: Designed for PET bottlesAdvanced Automation & Control SystemsThe monoblock’s integrated design simplifies synchronization between blowing, filling, and capping. The pressurized filler cabin with filtration improves hygienic conditions around the filling environment, helping maintain product quality. Mechanical gravity valves ensure repeatable volumetric accuracy for still beverages, while the Arol capping turret with pick & place distribution delivers consistent torque and closure positioning for pre-threaded plastic caps, including tethered designs compliant with modern packaging standards. Quick access to key turrets supports routine adjustments and maintenance.Production Line Integration CapabilitiesThis Combi is engineered for smooth integration into a complete packaging line. Upstream, it pairs with preform feeding and heating systems suited to the Sidel SBO 16 Series 2. Downstream, it interfaces with conveyors, labelers, inspection equipment, and secondary packaging machinery for end-to-end industrial packaging. Format changes center on PET neck compatibility and cap standardization (e.g., GME30.28), ensuring dependable handling across typical PET beverage applications. The counterclockwise rotation aligns with common plant layouts, enabling inline or cell-based configurations.Machine Condition & Maintenance HistoryThe Combi was overhauled at the end of 2024, providing refreshed reliability for immediate deployment in a used bottling line context. Core mechanical and hygienic features are stated, including the pressurized filler cabin and air recovery on the blow molder. The listing indicates a complete Alaska neck handling set is i... Bwedpfxey Uvgpj An Nen

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Bjdpfeyuyg Ssx An Newn Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: like new (used), power: 46 kW (62.54 HP), rotational speed (max.): 18,000 rpm, SPL Motor Spindle HSK-A63 46 kW 18000 rpm Manufacturer: SPL Spindel und Präzisionslager GmbH Type: Motor spindle Tool holder: HSK-A63 Power: 46 kW Rated speed: at 9880 rpm Maximum speed: 18000 rpm Lubrication: Lifetime grease Bearings: Hybrid bearings Cooling: Water cooling Coolant flow rate: 8 l/min Maximum pressure: 7 bar Protection class: IP65 Balancing quality: G1 Spindle head seal: Purge air Radial run-out accuracy: 2 µm Axial run-out accuracy: 2 µm Radial run-out accuracy at 250 mm distance: 12 µm Bjdpfx Asyr Aaven Njwn Rotating parts mass moment of inertia: 0.0196 kgm² Front spindle diameter D1: 151 mm Bearing diameter D2: 174 mm Diameter LB: 164 mm Overall length L: 614 mm Material number: 90010004149

Condition: ready for operation (used), Year of construction: 2008, number of axes: 6, This 6-axis PANASONIC TA-1800WG Welding Robot was manufactured in 2008. It includes a 350A welding source, a VWP 316/351/95-3 welding gun, a BRG 2000 mechanical cleaner, an 800mm plinth, and a 750 H-manipulator. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800WG machine we have for sale. Contact us for more information. • 6-axis welding robot Additional equipment • Welding source: 350A (SP-Mag / Hyper Dippulse) • Welding gun: VWP 316/351/95-3 Bsdpfxsyfd N Ee An Njwn • Mechanical cleaner: BRG 2000 • Plinth: TA, H=800 mm • H-manipulator: 750

Condition: ready for operation (used), Year of construction: 2007, operating hours: 101,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control system: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 • Motor and planetary gearbox replacement in 2021 • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Bsdpfx Ajyn Ntzon Nown Additional equipment • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)

Condition: used, Year of construction: 2004, machine/vehicle number: LC617, Used KRONES glass bottling line - 18000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for spirits is a high-performance, used bottling line engineered around premium OEM equipment. With a nominal speed of 18,000 bottles per hour, it delivers reliable throughput for mid-to-high volume beverage production and industrial packaging. The line handles standard spirits formats with precision and is fully integrated from depalletizing to labeling and end-of-line packaging.Production speed: 18,000 bottles per hourBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainer types: Designed for Glass bottle handlingKey OEMs: Krones (core line), Zalkin (capping), plus Hartness, MSK, Garvens, Videojet, Langenpac, Marsh, Mapex, GassnerPrimary modules and models: Krones Sensometic filler, Krones Variojet rinser, Zalkin T9/360 cappers (x3), Krones Prontomodul labeller, Krones Linapac autopacker, Krones Variocart C-40 case erectors (x2), Krones Variocol H-120 case sealer, Garvens E40-DMS checkweighers (x2), Videojet 3330 laser coders (x2)Years of manufacture (predominant): 2004 core line, with labeling and coding upgrades in 2015 and 2016Line scope: Fully integrated from depalletizing, rinsing, filling, capping, labeling, inspection, coding, packing, case forming and sealing, to conveyingAdvanced Automation & Control SystemsThe line features comprehensive automation across all stations to ensure stable, synchronized operation at 18,000 bph. Continuous multi-head capping from Zalkin enables consistent closure application. In-line inspection and weighing provide real-time quality control and automated rejection. Laser coding and case printing integrate seamlessly for traceability and compliance within beverage production.Integrated controls for coordinated machine operation and changeoversIn-line inspection (fill level/visual) and checkweighing with automatic rejectLaser coders for high-speed, permanent coding on glass containersEnd-of-line automation including autopacking, case forming, and sealingProduction Line Integration CapabilitiesEngineered as a cohesive, second hand packaging system, the line offers end-to-end integration and stable handling of glass bottles. It is suitable for spirits bottling with format flexibility across common 0.7L, 0.75L, and 1.0L sizes. The conveyor network covers container, pack, and pallet levels, supporting streamlined material flow and efficient accumulation.Inline operation from depalletizer to labeller and end-of-lineFormat flexibility across 0.7L, 0.75L, and 1.0LFull conveyor network for containers, packs, and palletsCompatible with additional upstream/downstream equipment as requiredMachine Condition & Maintenance HistoryThis used bottling line has been maintained to a very high standard with regular OEM servicing. It is currently in production with excellent operational performance and strong reliability. Availability is planned for October–November 2026, allowing for structured decommissi... Bsdpfx Aoyzz Hhon Newn

Condition: used, This listing is for a Sysmex XT-1800i Automated Hematology Analyzer Bsdpfx Anjxzgxas Nswn This system is complete, with PC and software disks. Designed to be reliable and efficient, the Sysmex XT-1800i offers medium volume laboratories an automated hematology system that can truly meet and exceed their expectations. The XT-1800i provides CBC and differential analysis using the same technologies as the other analyzers in the Sysmex XT-Series and XE-Series lines. Body fluid samples, including CSF, serous fluid and spinal fluid, are analyzed for RBC and WBC counts. A 6-part WBC Differential, including enumerated immature granulocytes (IG% and #), is optional for laboratories who need to reduce smear reviews. The XT-1800i streamlines your workflow by providing testing for up to 80 samples per hour, enabling rapid turnaround time.

Condition: used, Year of construction: 2013, machine/vehicle number: M313, Used MESAL filling triblock - 18000 BPMTechnical Specifications & Performance DataThis MESAL filling monoblock is a tri-block configuration that integrates rinsing, filling, and capping on a single compact rotary platform. Engineered for PET bottle handling and designed for still beverages such as juice and tea, it delivers reliable performance and consistent product quality for industrial packaging and beverage production. With automatic operation, weight (gravimetric) filling, and a robust rotary carousel design, this unit is suitable for scaling a used bottling line or expanding second hand beverage production capacity with modern automation.Manufacturer: MESALModel: E50-60-15GA1Year: 2013Production speed: up to 18,000 bottles/hourConfiguration: Rinser/Filler/Capper tri-blockFiller valves: 60Rinser grippers: 50Capper heads: 15Container type: PETBase format: 0.38L (380 ml)Neck finish: 38 mmFill principle: Weight (gravimetric)Operating type: AutomaticElectrical: 400 V, 60 HzControl system: Omron PLC/HMIApproximate weight: 8,000 kgAdvanced Automation & Control SystemsThe machine is equipped with an Omron PLC-based control system and touch HMI for efficient operation, diagnostics, and format adjustments. Automated bottle handling across the rinser, filler, and capper ensures smooth transfer between turrets, with synchronized motion and recipe-driven settings to minimize changeover times. Electrical specifications are configured for industrial environments, and integrated safety interlocks support protected access during operation.Omron PLC with modular I/O and clear status indicatorsTouchscreen HMI for parameter management and alarmsAutomatic operation with synchronized turretsDesigned for stable weight-based filling accuracyElectrical supply: 400 V, 60 HzProduction Line Integration CapabilitiesThis filling monoblock integrates seamlessly into a complete beverage production line. Infeed and discharge are designed for PET bottle conveyors, with intermediate transfers between the rinser, filler, and capper to maintain continuous flow. The platform is well-suited for industrial packaging lines requiring efficient rinsing, precise filling, and reliable capping in a compact footprint.Inline integration with standard bottle conveyorsRinser/Filler/Capper tri-block layout for reduced floor spaceSuitable for still beverages: juice and teaDesigned for PET bottles with 38 mm neckBase format 0.38L; additional formats can be supported with change partsMachine Condition & Maintenance HistoryThe machine is currently in storage. From a commercial perspective, this status typically enables inspection and testing prior to commissioning. The mechanical and... Bwsdpfx Ajyhbgasn Nsn

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Bwsdpjw D E Ubjfx An Njn Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: excellent (used), Year of construction: 2012, FRASCH Type: FA-LH1200/LA 1800X500 Year 2012 Bwedpfx Ansu Txcaj Njn L . 3.0 meters (1.2+1.8 meters) W. 0.50 meters H. 70 meters

Condition: excellent (used), Year of construction: 2019, Flow Rack, FIFO Rack Manufacturer: Bito 2050x1800x2100 mm We have various flow racks: - straight - straight/bent - bent Flow racks are divided into slightly inclined flow levels and designed for goods provision according to the FIFO (first-in, first-out) principle. The racks are loaded from the back, and the goods move on plastic rollers to the opposite side, from where they can be retrieved as needed. Bodpfx Anjwlg Rme Njwn Advantages: Enables high picking performance Prevents idle times due to a lack of replenishment Ideal for fast- and medium-moving items Five times higher picking frequency compared to shelving We have several sizes in stock! If you are interested, please contact me.