Used Amada Hfb 125-3000 for sale (8,919)

Condition: used, Electric chain hoist crane DEMAG, type DCM PRO -125 1/1 H2.8 V8/2, Manulift Year of manufacture: 2004 Load capacity: 125 kg Nsdjzugnujpfx Ah Sodc Hook travel: 2.8 meters Lifting speed: 8 m/min Fine lifting speed: 2 m/min Distance from suspension to load hook: 630 mm Power supply: 400 volts, 50 Hz 1 load chain = 125 kg Manulift hand control directly on the crane hook Weight: 21 kg Good condition

Condition: used, PSK series, older generation Tank capacity: 40 to 120 L Standard power supply: 220/380 V three-phase 50 Hz Installed electrical power: 15 kW Electric heaters: 6 × 2.2 kW Compressor power: 3.5 kW Agitator motor power: 0.65 kW Minimum water pressure: 2 atm Water consumption: 400 L/h Thermal fluid: inhibited glycol + water Thermal fluid quantity: 22 L 3-digit digital display 6 operating controls 4 programming controls 7 indicator lights Nodpfx Ajzx Uhqoh Sodc Pasteurization temperature: 50 to 90 °C Programmable holding time: 0 to 30 min Continuous agitation during pasteurization Automatic cooling down to +4 °C Automatic holding at +4 °C Agitation: 15 s every 15 min during holding Discharge by gravity or with agitation Water inlet control to the tank Water control for cleaning the tap Dimensions (L × W × H): 640 × 880 × 1065 mm Net weight: 255 kg Cattabriga PSK 125 ice cream pasteurizer – capacity 40 to 120 L General overview The Cattabriga PSK 125 ice cream pasteurizer is designed for the thermal treatment of mixes used in the production of ice cream and artisanal gelato. This data sheet corresponds to the older generation PSK 125 identified on your machine, which is different from the newer KEL and PRO versions. Its working capacity ranges from 40 to 120 L, allowing for the processing of large volumes of mix in a single tank. What sets this model apart This version of the PSK 125 is based on a robust design combining electric heating, mechanical agitation, and a thermal circuit. The total installed power reaches 15 kW, with six 2.2 kW heaters. The agitator is driven by a 0.65 kW motor, while the compressor delivers 3.5 kW. The control panel features a digital display and controls for operating the machine without using the touch interfaces of the newer generations. Key advantages Capacity of 40 to 120 L for different preparation volumes Installed power of 15 kW, suitable for this tank capacity Integrated mechanical agitation during mix processing Thermal circuit using a mixture of inhibited monopropylene glycol and water Electronic controls with digital display Compact construction with a height of approximately 1065 mm

Condition: used, Year of construction: 2018, overall weight: 130 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz Njdez H Ah Sepfx Ah Sodc delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2008, input voltage: 380 V, cutting height (max.): 330 mm, cutting width (max.): 370 mm, total height: 34 mm, overall weight: 2,500 kg, cutting range round steel at 90°: 330 mm, cutting range square steel at 90°: 330 mm, saw band length: 4,430 mm, saw band width: 1 mm, For sale: a professional, fully automatic band saw for metal, manufactured by the renowned Taiwanese brand Bigstone, model CF 325 (year of manufacture 2008). Its robust construction ensures high rigidity and performance, with technology comparable to top-of-the-line models from AMADA, BOMAR, and PILOUS. Here is a short video demonstrating the machine in operation: ?is=nlNDZ9sSgcR8z4iA The machine weighs a substantial 2500 kg, guaranteeing complete vibration-free operation during cutting and ensuring perfect geometry and consistent serial production. Technical condition: The machine is in 100% working order, connected in the workshop, and ready for immediate production use. The hydraulic feed system, vise clamp, and automatic cycle function flawlessly. Technical specifications: • Maximum cutting range (square): 330 mm • Maximum cutting range (rectangle): 330 x 370 mm • Cutting blade size: 4430 x 34 x 1.1 mm (wide, stable blade) • Main motor power: 5 kW (very powerful drive) • Weight: approx. 2500 kg Nsdpfx Ajxyuwnoh Sjdc Equipment and logistics: • Advanced automatic control: The controller allows for full programming of the desired number of pieces to be cut. • Multiple feed function: The machine has a function for repeating the feed stroke up to nine (9) times for a single piece. This enables fully automatic cutting of very long parts without the need to manually reposition the machine stop! • Full automatic cycle (hydraulic material feed, clamping, cutting, and ram return). • Integrated cooling system and blade cleaning brush. • LOADER INCLUDED – I have a forklift on site and can ensure the safe and efficient loading of this 2.5-ton machine onto your transport. The saw can be tested in a full automatic cycle during an inspection. Price: 26,000 PLN net (+23% VAT), negotiable. VAT invoice available.

Condition: used, Technical details: measuring range X-axis: 3000 mm indexing: 0,1 mm weight: variable kg No. 1 Caliper/caliper gauge made of stainless and hardened steel Make INOX Measuring range 0 - 3000mm Reading 0.05mm via vernier Leg length approx. 280mm without measuring tips for internal measurement No. 2 Caliper/caliper gauge made of stainless and hardened steel Ndjdpeu N Atwofx Ah Sec Make Massi according to TGL Measuring range 2000mm Reading 0.1mm via vernier *

Condition: used, Technical details: welding current: 330A / 50% bis 210A / 100% protection class: IP23 total power requirement: 13,8 kVA weight of the machine approx.: 71 kg dimensions of machine: 0,95 x 0,60 x 0,90 m - MIG / MAG / MIG and electrode - cooling method water-cooled AF - insulation class B - power range 3A / 20V to 330A / 34V - Draht Ø bis 1,6mm Equipment: - cooling unit Nodpfxou Nwb Ns Ah Sodc Control via robot interface *

Year of construction: 1979, condition: used, Technical details: Flow rate: 400 m³/h Nodpfou Nwwqex Ah Sedc negative pressure : 1250 pa motor: Typ B5-71 mit 2850 U/min connection electric: 380 V total power requirement: 0,37 kW weight of the machine approx.: 35 / 28 kg dimension machine xH: Ø 0,5 x 1,3 m Trockenabscheider mit Ventilator, beide Geräte stehen als Ersatzteilspender zum Verkauf! Nr. 1 = 400 m³/h BJ 1979 (Zustand: Motor i.O., Saugprozess außer Funktion) Nr. 3 = 400 m³/h BJ 1979 (Zustand: unvollständig!) Dry separator with fan Nr. 1 + Nr. 2 (Nr. 1 = 400 m³/h + Nr. 3) Suction nozzle Ø 40 x 50mm Operating temperature 50°. Filter space = approx. Ø 400 x 500m i.D. *

Condition: used, Technical details: welding current: 330A / 50% und 210A / 100% protection class: IP 23 Ndodpfx Ahsu Nxv Io Soc total power requirement: 13,8 kVA weight of the machine approx.: 71 kg dimensions of machine: 0,95 x 0,60 x 0,90 m - MIG / MAG / MIG and electrode - cooling method water-cooled AF - insulation class B - power range 3A / 20V to 330A / 34V - wire feeder DS III (wire Ø 0,8 - 1,6mm) optinal possible! Steuerung über Roboterinterface *

Condition: used, Tilting container for forklifts, RMS Rotherm Mechanical Systems, type KK - 125 Chip container - bulk container - folding container Manufacturer's No.: 89218 Year of manufacture: 2012 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork pockets: 200 x 60 mm Fork spacing, inside/outside: 505/900 mm - Manual locking device for the tilting container Ndsdpjz Rnb Hofx Ah Ssc - Tilting process is initiated by gravity - 4 plastic support rollers, Ø 175 mm, 2 swiveling, 1 with locking mechanism - Fork pockets / forklift receiver Weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Overall height with frame: 1200 mm Very good condition Suitable for collecting, storing, and transferring valuable materials.

Year of construction: 2021, condition: ready for operation (used), travel distance X-axis: 1,400 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 400 mm, overall weight: 26,000 kg, total width: 4,300 mm, total height: 3,444 mm, product length (max.): 4,920 mm, number of axes: 3, This 3-axis GRENZEBACH FSW Machine DSM 3000 was manufactured in 2021. It features a working area with an X-axis of 1,400 mm, Y-axis of 3,000 mm, and Z-axis of 400 mm. The machine has a maximum spindle speed of 5,000 rpm and a rapid traverse of 20 m/min. If you are looking to get high-quality friction stir welding capabilities, consider the GRENZEBACH FSW Machine DSM 3000 we have for sale. Contact us for further details. • Units available: 2 • Weights: • Basic machine: 18,750 kg • ZC axis: 1,290 kg • Welding head: 10 kg • Control system: 750 kg • Overall machine: approx. 26,000 kg • Electrical: • Max. power consumption: 10 kW • Voltage: 400 V • Frequency: 50 Hz • Power supply: 3PH + N + PE • Mains fuse: 32 A • Pneumatics: • Min. line pressure: 6 bar • Connection diameter: 1" • Air consumption: approx. 21 m³/h • Compressed air quality: ISO 8573-1 Class 4.4.1 • Hydraulic system: • Flow rate: 5.1 l/min • Rated pressure: 340 bar • Filling quantity: approx. 15 l • Effective capacity: approx. 11 l • Working area: • Max. rapid traverse: 20 m/min • Max. process speed: 1.5 m/min • Process/operating data: • Process force X/Y: 2.6 kN • Process force Z: 10 kN • Max. spindle speed: 5,000 rpm • Operating temperature: +15 to +35 °C • Max. humidity: 70% • Max. operating time: 24 h/day Additional equipment Njdoz Ryauopfx Ah Sedc • Clamping device (approx. 7,500 kg)

Condition: new, functionality: fully functional, Year of construction: 2026, max rolling capacity (cold): mm. 32 max prebending capacity (cold): mm. 24 at diameter mm. 2050 with material yield strength N/mm2 260 working length: mm. 3050 number of rolls: four top roll diameter mm. 410 pinching roll diameter mm. 390 driven rolls : two rotation speed 5 m./min. rolls rotation: hydraulic installed power: 30 PS Voltage 400V, 50Hz, 3Ph Nsdpfxjf T Rzfo Ah Ssdc Inkl.: - hardened & polished rolls - cone bending device - electronic rolls parallelism - Siemens PLC Control - CE certificate - control console on wheels

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3163 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rollers: planetary guide Working length: 3000 mm Nedpfx Ahoiivfqj Sjdc Top roll diameter: 630 mm Lower roll diameter: 570 mm Side rolls diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800mm Width: 3,600mm Height: 3,550mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 70 mm Bending performance (full working width) 60 mm from pipe diameter 3150 mm Rolling capacity (full working width) 55 mm Bending capacity (full working width) 50 mm from pipe diameter 820 mm Standard equipment: Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: like new (used), Scale with the following dimensions: Length 2000 mm Width 1500 mm Height 110 mm Aisi 304 L stainless steel Load capacity 3000 kg The scale has valid certification for over 2 years Touchscreen display with multiple functions and language selection option Please check my other listings Njdpfx Ajy Ilvysh Ssdc

Year of construction: 2025, condition: like new (used), For sale is a mobile dust extractor from the manufacturer Blotenberg, model FILTERBLOC MOBIL-3000, with 0 operating hours. The unit has sustained minor damage, presumably from a collision, but this is not expected to affect its functionality. Manufacturer: Blotenberg Model: FILTERBLOC MOBIL-3000 Date of manufacture: 04/2025 Article number: OEM-7094 Power: 3.0 kW Voltage: 400 V Phases: 3P+PE Frequency: 50 Hz Protection class: IP55 Nominal air volume: 3,200 m³/h Max. negative pressure: 2,500 Pa Max. raw air connection: Ø 224 mm Ndsdez R Dhpjpfx Ah Soc Filter area: 20 m² Weight: 180 kg Operating hours: 0 h Design: Mobile, can be moved Application: Extraction of dry, free-flowing dust and fumes Condition: Unused, with minor collision damage Documentation: Operating and maintenance manual available

Condition: new, Year of construction: 2020 Empty weight: 118 kg Nodpfx Aez S Htqeh Sjdc Carrying capacity: 400 kg Width: 125 cm Attachment suited for: Agricultural machines

Condition: used, machine/vehicle number: LC573, Used olive oil processing line VITONE V3 3000 kg/hr The Used olive oil processing line VITONE V3 3000 kg/hr delivers a complete solution for olive oil extraction. Industrial olive mills and professional oil producers use this line to achieve efficiency, operational continuity, and consistent oil quality. The system processes up to 3000 kg of olives per hour, offering high performance while reducing capital investment compared to new equipment. Technical configuration of the processing line VITONE manufactures every component of the Used olive oil processing line VITONE V3 3000 kg/hr. As a result, the system offers seamless mechanical integration and compatibility between modules. Moreover, technicians benefit from simplified maintenance procedures. Operators can run the line continuously without compromising output quality. In particular, VITONE uses certified food-grade materials that resist corrosion and mechanical wear, ensuring long-term durability. Olive washing and feed system The VITONE V3 olive washer initiates the process. It uses water and agitation to remove leaves, stones, and soil. Subsequently, the integrated elevator feeds clean olives directly into the crusher. This approach, in turn, minimizes downtime and reduces manual handling. In addition, the enclosed design improves workplace hygiene and reduces contamination risks. Traditional olive crushing Nedpfx As Adt Rxeh Sedc The VITONE granite millstone crushes the olives at low rotational speeds. Because of this, the system preserves phenolic content and aroma compounds. Therefore, the machine enables producers to obtain oil with superior sensory qualities. Operators favor granite millstones for high-quality extra virgin olive oil, especially in artisanal production contexts. In other words, this equipment combines tradition with technical efficiency. Paste mixing with thermal control After crushing, the paste pump transfers the olive paste to the VITONE malaxers. These units mix the paste while maintaining precise temperature control. This step is critical, as it promotes coalescence of oil droplets. Consequently, the system prepares the paste for high-yield separation. In addition, thermal stability prevents the degradation of volatile compounds, preserving quality. Solid-liquid separation The VITONE decanter centrifuge separates the solid phase (pomace) from the liquid phase (oil and water). This machine handles 3000 kg/h and operates continuously. Thanks to its high throughput, it ensures stable processing under demanding conditions. Furthermore, the decanter maintains excellent oil recovery rates and leaves minimal residual oil in the pomace. As a result, it significantly reduces waste. Final clarification and oil polishing Two VITONE vertical separators perform the final stage of oil clarification. These machines remove fine solids and water traces from the extracted oil. Notably, the built-in collection tubs simplify ...

Condition: excellent (used), Year of construction: 1980, For sale: a wire brush grinder in good condition. Ndjdpfjz Sk H Nsx Ah Ssc - 1500/3000 RPM. - 380V.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220113, total length: 3,500 mm, total height: 2,500 mm, total width: 1,500 mm, overall weight: 12,500 kg, feed length X-axis: 3,000 mm, input voltage: 400 V, type of input current: three-phase, We offer this used CNC edge banding machine, Otinus WC67Y-250/3200, manufactured in 2022. Manufacturer: Otinus Model: WC67Y-250/3200 Year of manufacture: 2022 Machine type: CNC edge banding machine Bending compensation Ndsdpfxe Adgrpj Ah Sjc If you have any questions or require further information, please send us a message or contact us by phone.

Condition: new, 0 ja Working width 3000 (3500) mm 0 ja Ruchser RU-BM-3000 (option: 3500) Wing assembly table ----- Herstellerbeschreibung: Item 1.0 Article 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of working platform manually adjustable. Usable width 2500 mm Nsdpet Tq Aasfx Ah Sedc Holder for hardware shears or hardware punch. 10 swivel-mounted pendants for hanging the sashes, completely pneumatically foldable for unhindered movement of the sashes on the table surface. Device for scanning the sash fitting length for constant and variable/centered handle fit and any handle fit height for pre-drilled sashes, colour-coded dimension recognition for the fittings. Pendulum height can be set to 50 or 60 mm on one stop. RU-SH, special screwdriver with pneumatic depth cut-off mounted on carriage, safety control, pneumatic height adjustment, screw feeder with automatic switch-off of the filling container manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4 commuter rail manually adjustable in depth against left and right one 4-fold turret stop each. PSF - Pneumatic clamping device for sashes against the lateral stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, sliding or brush strips should be used as a support. Item 1.1 Article 6315 RU-BM-... adjusted to customer's fitting specification Item 1.2 Article 0500000 Holder adjusted to customer punching press/ shear For mounting a customer-supplied punching press or shear (other manufacturer) on the sash assembly table. Please specify make when ordering !!! ----- Price RU-BM-3000 in the above version ex works: on request! ----- Fitting bearing options for RU-BM-3000: ----- Version with fixed fitting bearing: Price EUR 5.468,00 Article 0630000 RU-BL-30/30 Fixed fitting storage unit Mounted above the leaf assembly table Length 3100 mm, depth 1250 mm, with 3 shelves with 10 compartments each, divided by partitions. Freestanding version: Price EUR 6.017,00 Item 0710000 RU-SBL3000/30 Freestanding storage unit, Length 3100 mm, depth 1250 mm, height 2050 mm, upright frame on the front without supports, 30 compartments, 10 in a row, each divided by partitions and a continuous shelf at the top, size of the compartments: width 280 mm, height 150 mm 4 pcs. Angle supports for corner deflections: Price 609,00 EUR Side length 120x120mm; inclination approx. 3° The front edge of the angles is bent up 5mm to prevent accidental unloading. 2 pieces on the left and 2 pieces on the right under the first shelf of the fitting. ----- Surcharge for RU-BM-3500 ----- Article 0610300 RU-BM-3500 Sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver length 3500 mm, width 1400 mm, inclination of working platform manually adjustable.usable width approx. 3000 mm Surcharge RU-BM 3500 to RU-BM 3000: EUR 2,811.00 Fitting bearing for RU-BM-3500 (only free-standing possible): Price EUR 6,665.00 Item 0710007 RU-SBL3800/36, free-standing fitting storage Length 3800 mm, depth 1280 mm, height 2060 mm...

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 3000-650-500 RA1410 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (UR): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Nodsk Aa U Dspfx Ah Sodc We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. rotary actuator / Year of manufacture: 2024 / DEMO machine / in stock & immediately available / very good condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as along roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 tonnes - For mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine’s flow rate - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes in sandwich design, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 Nodpfoyltvbjx Ah Ssdc OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST angle-axis piston motor - With automatic displacement regulation 60–80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60–80 - Required pressure in bar (min-max): 200–350 - Required hydraulic flow rate: 80–170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net The rotor requires 3 hydraulic lines: supply, return, and leakage oil. An additional hydraulic circuit is required for the hood. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse has a very large selection of various Seppi M. products that are ready for immediate delivery! Mr. Herden is happy to assist you by phone. Upon request, we can also provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in...

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Fabr. / Serien Nr. 12.16.0072, Year of construction: 2016, operating hours: 6,250 h, total length: 2,000 mm, total height: 1,400 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 800 kg, input voltage: 400 V, input current: 32 A, shaft length: 1,070 mm, temperature: 200 °C, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 10 °C, ambient temperature (max.): 35 °C, electrical fuse: 32 A, table width: 125 mm, tank capacity: 25 l, table length: 125 mm, repeat accuracy: 0.001 mm, Equipment: cooling unit, Manufacturer: SLM Solutions GmbH Type: SLM 125 HL Manufactured / Serial No.: 12.16.0072 Year of manufacture: 2016 Weight: 800 kg Dimensions: Length x Width x Depth in mm (2,000x1,400x1,100) Documentation: yes Accessories: Spare parts such as flanges, pipe sections, substrate plates, coating lips, powder containers or bottles (photos available upon request) Special features: Compressed air 7-8 bar, inert gas (argon or nitrogen) 5 bar and cooling water are required for operation. Nodpfx Ahoy Uzcio Sodc Used SLM Solutions SLM 125 HL system for processing reactive and non-reactive powder materials. Stainless steel and aluminum (other materials possible) have been processed on this system. Design of process chamber, handling station, and powder extraction system in accordance with ATEX Directive II for flammable materials. Build volume (L x W x H): 125 x 125 x 125 mm (less substrate plate height) Build volume reduction (L x W x H): 50 x 50 x 50 mm (less substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 μm - 75 μm, 1 μm increments Min. feature size: 140 μm Focus diameter: 70 μm - 100 μm Max. scanning speed: 10 m/s Average protective gas consumption during build process: 0.6 l/min (argon) Average protective gas consumption during flood process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Ndsdpj Aa Im Tjfx Ah Sec Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: used, Year of construction: 1987, Parallel lathe PBR, type TM-30 Distance between centers: 3000 mm Max. diameter over bed: 620 mm Max. diameter over cross slide: 400 mm Max. diameter in bed gap: 860 mm Spindle diameter: Ø 105 mm Spindle speed: 15 – 1500 rpm 3-jaw chuck, Ø 315 mm Year of manufacture: 1987 Motor: 15 hp Ndjdpfx As Acd N Neh Ssc Threading: Metric + Whitworth Tailstock: MK5 Equipment: 1 x 3-point fixed steady rest Rapid traverse Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4.5 t

Condition: used, Hommel Dura measuring plate/inspection plate made of natural hard stone (granite plate) Hommel Dura measuring plate made of hard stone (granite plate) - Length: 3000 mm - Width: 1000 mm - Thickness: 300 mm - 1 x T-slot - No. 2724 Suitable as a measuring plate, inspection plate, and precision work surface. You can find more measuring plates in other sizes – new and used – in our shop! International shipping costs available upon request! Nedpfx Ahjk Shcuj Ssdc