Used Beck Sx Hp for sale (7,932)

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand Fgsdpfx Asx Suzasggeg German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 80 mm, number of axes: 3, overall weight: 5,200 kg, spindle motor power: 7,500 W, spindle speed (max.): 24,000 rpm, This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details. • Number of milling spindles: 2 • Tool clamping system: HSK-F63 • Vertical drill spindles: 96 • Horizontal drills (X/Y): 32 / 4 • CE mark Fgodpfx Agezuhcgegeg Additional equipment • Barcode reader • Enclosed fence • Light barrier • DXF interface • Software: SCM XILOG PLUS

Condition: good (used), functionality: fully functional, price starts from 2.800 EUR gluing press 42000 x 450 x 60 mm press 15 pieces press cylinder ( Membrane cylinder ) with press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down devices Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight 600 kg Fedpfxog Uk Eio Aggogg Price on request 2 press frames to turn 3 press frames as gluing star 4 press frames

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,350 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 39 m/min, feed rate Y-axis: 39 m/min, feed rate Z-axis: 39 m/min, workpiece weight (max.): 2,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 50, Equipment: chip conveyor, documentation/manual, We offer this Hurco BX50i vertical machining center in very good condition, manufactured in 2020. It was first put into service in 2021. Model: BX50i Work table surface 1500 x 960 mm T-slots 6 x 22 mm Maximum permissible uniformly distributed loads 2500 kg Door opening 1100 mm Distance between the 2 columns 1060 mm Distance from spindle nose to table min/max 180/780 mm Spindle speed: 0 – 18000 rpm Hybrid spindle bearings Bearing lubrication: Grease/air Spindle taper: HSK63 FORM A Peak power (for 1 min) Continuous 47 HP - 35 kW at 2800 rpm 33.5 - 25 kW at 2800 rpm Maximum speed: 18,000 rpm Number of tools: 50 Fgodpfxszzlu Ts Aggsg Center spindle coolant: 40 bar KNOLL paper filtration If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2007, ILAPAK DELTA 3000 LDR B SX | Flowpack packaging machine (Horizontal packaging line) Manufacturer: ILAPAK International S.A. Model / Type: DELTA 3000 LDR B SX Serial number: D.230.04.061 Year of manufacture: 09/2007 Power supply: 400 V / 50/60 Hz / 3 phases Power: 7500 W Width of infeed belt: 300 mm Dimensions of sealing area: Seal length: 400 mm Seal width: 400 mm Overall dimensions: 4000 x 1450 x 1950 mm Markem-Imaje laser printer FUME EXTRACTION AND FILTRATION SYSTEM Brand: BOFA International Ltd Model / Type: ES400i Serial number: 06/07/ES400i-771 Year of manufacture: 06/2007 Power supply: 220-240 V / 50/60 Hz Rated current: 6.20 A Dimensions: 720 x 440 x 800 mm Compatible filter cartridges: 0695916 & 10001304 Machine is incomplete Fgsdpfx Aey Umlveggog The Ilapak Delta 3000 industrial flowpack is one of the most highly regarded horizontal HFFS (Horizontal Form Fill Seal) packaging machines on the market, designed for continuous operation at high production rates. Machines in the Delta 3000 series are characterized by a design based on multi-axis servo drive technology, which allows for precise control of the film feeding process, product positioning, and cutting of finished packages. The LDR version with bottom film feeding is an ideal solution for packaging products with irregular shapes, sticky or easily deformable products (e.g., fresh meat, cheeses, bakery products with or without trays, medical products). The unit presented here was factory-integrated with an advanced laser marking system from Markem-Imaje. The use of a laser coder allows for contactless, permanent and extremely aesthetic application of expiration dates, batch numbers or barcodes directly onto the packaging film during its unwinding, without the need for costly thermal transfer ribbons or ink. To ensure complete operator safety and a clean working environment, the set includes a dedicated, high-performance BOFA ES400i extraction system. The task of this device is to immediately suck up and neutralize the smoke and microscopic particles generated during laser ablation of the film structure, protecting the operators' lungs and the laser optics from contamination.

Condition: excellent (used), Working width: 110 cm Fodpezxzkfsfx Aggogg First unit: steel roller Second unit: combination – rubber roller plus pad Pneumatic belt cleaning Pneumatic oscillation with photocells Electric table height adjustment (up/down) Pneumatic belt tensioning Two feed speeds Abrasive belt size: 2200 x 1130 mm Voltage: 400 V Motor: 12 kW Weight: 1542 kg Year of manufacture: 2004

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Floor space required 4810 x 2550 mm Fgedpfxozuxt Ae Aggsg Weight 7800 kg Supplied with: Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Cost: £49,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, System Decanter used Type Guinard D3LLC-30B HP Machine number 3806 Fsdpfx Ajwtckleggsgg Year of manufacture 2003 Speed 3500-4000 rpm. Drum diameter 340 mm Service If you have individual requests, please contact us. We are your specialist in sludge dewatering with over 40 years of experience.

Condition: used, Year of construction: 1983, Max. press length: 2500 mm Max. press width: 1250 mm Total pressing force: 80 t Fgedpjzkl Tbefx Aggsg Specific pressing force: 2.5 kg/cm² Press opening width: 400 mm Heating plate material: standard aluminum Operation: button control Swivel button: Yes Number of pressure pistons: 4 Safety edge strip: Yes Condition of heating plate: good Weight: 3800 kg Dimensions: 2850 x 1410 x 2000 mm Storage location: Nattheim

Condition: excellent (used), a) Ref. VAC-1) Saw-Dust Collecting System “AIREX” (with fan - motor power HP 150) - Total air flow rate: 40,000 CFM (67,960 m³/h) b) Ref. VAC-2) Saw-Dust Collecting System “AIREX” (with fan - motor power HP 250) - Total air flow rate: 60,000 CFM (101,940 m³/h) Fsdpfx Agezx Eilsgjgg

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Fedpfx Aszwpvajggsgg Minimum workpiece length: 270 mm Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: ab/174978, overall weight: 2,950 kg, total height: 1,650 mm, total width: 1,700 mm, rotational speed (max.): 6,000 rpm, planing width: 230 mm, input voltage: 380 V, number of blades: 4, total length of planing tables: 4,700 mm, type of input current: three-phase, year of last overhaul: 2023, actuation type: electric, Equipment: CE marking, documentation/manual, four-sided planer SCM Superset XL Comp 6 documentation available, minimum/maximum planing dimensions width 25 to 230 Fgsdpfozwf Eksx Aggjg minimum/maximum planing dimensions height 6 to 120 1x planing spindle 10 hp, sanding spindle 10 hp, width spindle 10 hp, thickness spindle 15 hp, additional spindle 10 hp, universal spindle 10 hp including planing heads/quick-change system, infeed table 2500, automatic height and width adjustment, with memory capacity for 99 programs manual central lubrication system, Waxelite pump, including dust extraction pipes up to and including automatic sliding dust collector year of manufacture 2005, machine available for pick-up, currently available, price €17,500 excluding VAT

Condition: new, power: 368 kW (500.34 HP), axle configuration: 6x2, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Iveco AS260S50Y/FS 6x2-4 Beverage Box Body with Tail Lift Böse swing wall body, tail lift: BÄR BC 2500 S4U-W4 (2,500 kg), fold-up underride guard, 2x trailer couplings (standard and low-mounted), CA axle configuration 6x2P with 3 axles, trailing axle, CT cab, AS MY version, DR steering SX left-hand drive, EM emission level Europe, EP engine 500 C13 Cursor 13, 500 HP, Euro VI, GT transmission TX-12M 12-speed HiTroniX automated, MT permissible gross weight 26 t, RT drive axle variant, SR single reduction, single axle, SU suspension FP full air suspension, TF brakes DIS-DIS disc/disc, TT additional axle STER steered trailing axle, single tires, WB wheelbase 4,800 mm, 78507 rocking mode (free rocking mode), 73131 DRIVE T. 315/70R22.5, 04047 luggage compartment left and right, 02714 electrically adjustable and heated exterior mirrors, 00632 transparent sun visor, mounted externally on cab roof, 00873 AS cab with standard roof (MY24), 72536 auxiliary diesel/water heater 4KW, 72970 standard refrigerator and storage box, 72251 with curtains at the bed, 72270 one-piece lower bed, degree of firmness – soft, incl. adjustable head section, 78563 horn behind bumper (compressed air), 07599 weight configuration front axle 8,000 kg/rear axle 11,500 kg (technically possible 12,000 kg)/trailing axle 7,500 kg, 75182 electrical preparation for tail lift operation according to VEHH standard, 02532 battery master switch in cab, electrically operated, 08299 air compressor 2-cyl. 630 ccm, 78713 battery charging socket, terminals, 05679 AdBlue tank, 80 liters, 07806 trailer coupling, Ringfeder make, 07228 fuel tank 390 liters, aluminum, 00730 rear axle ratio: i 2.64, 06156 trailer coupling, 40 mm, 130 kN, 00351 edge protector at frame end, 01934 ECO NORMAL PERFORMANCE MODE, 78388 electrical connection for body on left frame, 02548 side marker lights, 75181 reverse warning buzzer, switchable, 01076 high-performance engine brake, 05108 warning beacon, 50105 white IC 194, 30804 operating manuals, 30184 tire manufacturer GOODYEAR, 20294 tires 315/70 R22.5, 26095 FUELMAX ENDURANCE S D, 79443 printed operation and maintenance manual, 00875 infotainment 10" TFT display, 02443 leather steering wheel, 01765 dashboard design: plastic with silver trim, 02759 air suspension for cab, 05629 sunblind roller for side windows on driver and passenger side, 02916 driver’s seat HI-Comfort, multi-adjustable, air-sprung, integrated headrest and height-adjustable seatbelt, lumbar support, with 3-stage cooling or heating function, 72543 LED headlamps, 78714 standard rear lights, 72629 fog lamps including cornering/turning light, 00915 electric parking brake, 07306 axle load display in cluster, 00883 corrective steering function (CSF) + lane departure warning system (LDWS), 00890 adaptive cruise control (ACC) with stop & go, 73240 electrohydraulic power steering. On request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. For further information, please visit our website. Fsdpsy Hn U Nsfx Aggsgg ... Subject to errors, alterations, and prior sale!!! ... ESP, navigation system, stationary heater Cab: Long-distance transport

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. • Machine maintained and serviced • Edge banding machine for single-sided edge application • Heavy-gauge steel construction • High-frequency motors • Protective hood over all units after the gluing station • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen Fgsdpfxszug Sgo Aggsg • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing • Scraper and edge scraper unit • Cloth polishing unit Additional equipment • Anti-adhesive and polishing liquids

Condition: used, mileage: 202,401 km, power: 320 kW (435.08 HP), axle configuration: 6x4, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, total length: 104,600 mm, total width: 25,500 mm, total height: 38,500 mm, loading space length: 62,900 mm, loading space width: 24,900 mm, loading space height: 3,900 mm, Year of construction: 2009, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. [phone number]). Mercedes-Benz Actros 2644 L 6x4 platform truck with rear crane Fgedpfx Ageztlrisgsg Crane: MKG HLK 541 HP, 307 operating hours, 5 hydraulic extensions, 2 manual extensions, radio remote control, 4-point support, crane tip, load chart: see photos, twist locks, outriggers, A00 front axle air-suspended, A57 front axle with camber, AL4 front axle 8.0 t, AM4 rear axle H7 13.0 t, bevel gear 233, AP3 axle ratio i = 3.714 (HL7), B43 trailer brake 2-line, B65 AIR DRYER HEATED, BB5 disc brake on front and rear axle, BB8 Telligent braking system with ABS and ASR, C71 rear underrun protection (EC), C73 front underrun protection (EC), CB9 splash guard (EC), front, CE6 DUST PROTECTION FOR AIR SPRING, CL9 steering LS 6/LS 8, DS3 pop-up roof, electric, E39 FUSE AUTOMATA, E52 CB mobile radio system, E86 battery sensor, EB3 batteries, 2 x 12V/220 Ah, maintenance-free, EC6 trailer socket, 15-pin, EC8 adapter, 15-pin to 2x7-pin socket, EM8 PSM, cab and trailer CAN, ISO 11992, ES5 auxiliary socket 12 V/15 A, cab bulwark, ET2 voltage converter 24 V/12 V, 15 A, EU2 CD radio Bluetooth, without mobile phone charging interface, EV2 CB radio pre-wiring, EV5 telephone, fax pre-wiring, EX8 toll collection pre-wiring, material Toll Collect, F04 L cab, F52 external sun visor, transparent, FA5 curtain, transverse in front of bed/sleeping berth(s), FA6 Mercedes star, illuminated, FC0 rain sensor and automatic headlights, FC7 tinted windows, without band filter, FE5 electric windows, driver and passenger door, FG1 digital clock with alarm function, FG6 drawer above engine tunnel, pull-out, FH9 root wood trim, cab, FK0 storage compartments above, with hinged lid, FL4 comfort cab suspension, steel-sprung, FN2 comfort cockpit, FQ2 cool box, 25 l, in pull-out drawer, FS2 wide-angle mirror, on driver's side, heated, FS4 sun blind, side window driver's door, FT2 exterior mirror, housing chrome, FX7 front mirror aerodynamic, front, FZ7 immobilizer, with transponder, G86 twin-plate clutch, GE7 Mercedes PowerShift 2, GH8 Mercedes PowerShift G 330-12/11.63-0.77, H03 air conditioning, H04 additional thermal insulation, H61 auxiliary hot air heater, Webasto Air Top 2000, HF1 construction site filter, I69 tires tubeless, 315/70 R 22.5 rear axle, IA5 wheel arrangement 6x4, ID2 air suspension rear axle, IE8 tires 385/55 R 22.5 front axle/front lifting axle/rear lifting axle, IF2 MPII series, IL1 domestic (Germany), IL6 color tone control, metallic, IL8 left-hand drive version, IR8 wheelbase 4800 mm, IV5 26.0-tonne truck, J76 air horns, cab roof, JD3 tachograph, dig. EC, speed limiter + additional recorder, ADR, JK2 combination instrument, graphic display, JZ2 tachograph manufacturer Stoneridge TVI, K40 fuel tank lock, KD6 exhaust gas monitoring for nitrogen oxide (NOx), KE9 on-board diagnostics 2, with NOx control, KG2 muffler, SCR catalytic converter medium, stainless steel, KH8 exhaust pipe, tailpipe downwards, KP4 AdBlue tank, 95 l, KP9 AdBlue container, plastic, KU4 main tank 400 l, aluminum, L16 fog lights, halogen, L54 rotating beacon yellow, left+right front, L72 electrical system, for external body, M62 air intake rear top, air filter under cab, MD4 speed limiter 90 km/h, EC, MD9 cruise control, MO1 viscous coupling electromagnetic, for fan, Behr, MS5 BlueTec 5 (Euro V), MV4 engine, V6, diesel, 320 kW (435 hp), 1800/min, MZ8 air compressor, 2-cylinder, regulated, N55 transmission oil cooler, ND3 auxiliary dri

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Fgsdpfxsx Sq Uvj Aggsg Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: ready for operation (used), We have a BECK HV600 shrinktunnel available. This machine is ready and is working like new! Fedpfohcdhlox Aggegg The measurements are in the pictures.

Condition: good (used), pressure 100 t punching cross-cut in cmm 40.0 in 22.0 mm ST stroke 120 mm column arm 760 mm Fedpezn Ahksfx Aggsgg total power requirement 8.5 kW weight of the machine ca. ca. 3.800 kg dimensions of the machine ca. ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Special price available upon request Features: - Robust / heavy-duty hydraulic hole punch - Punch stroke continuously adjustable - NC stop system "MUBEA MATIC 82" * Travel range in X and Y axes * With "FAGOR" control unit * Includes large support table * Separate control cabinet - Various (custom) punching tools (see Figure 9) - Front safety guard, including sheet metal scraper - 1 freely movable foot switch - Operating instructions for machine and stop system

Condition: used, Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximarely 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Fodpeyma Dbefx Aggjgg Specifications: Capacity: 14.1 ft³ Material of construction: 316 stainless steel Width: 22.83" Horsepower: 7.4 hp Length: 66.14" Jacket: No

Condition: excellent (used), functionality: fully functional, power: 735.5 kW (1,000.00 HP), Year of construction: 2015, Oil drilling rig National 80 UE 1000 HP Year of manufacture: 2015 Fully operational Fjdox Nc Ddepfx Aggogg

Condition: used, Year of construction: 2021, saw blade diameter 370x32x3 mm 15-150 U/min vice 190 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180x100 mm 115 mm 90 mm 90x90 mm 115 mm 100 mm 120x100 mm 115 mm 100 mm 120x100 mm total power requirement 5,5 kW Fgsdpfxoyvvpao Aggsg weight 615 kg Overall size 1400x1400x2000 mm

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed adjustable up to 25 m/min. -Option for fixed or rotating tunnel bars. -Deflector plates allow the hot air streams to be adjusted separately at the top and in the middle. -Bottom air flow can be activated separately. Fsdpfx Agoh U A I Rsgsgg -The machine can be moved or locked in place using adjustable foot rollers.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 310B069, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fanuc Series 18i-MB, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, BRIDGEPORT XP3-760 - Manufacturer: Bridgeport - Model: XP3-760 / VMC 760 XP3 - Serial Number: 310B069 - Year: 2005 - Machine Type: CNC Vertical Machining Center - CNC Control: Fanuc Series 18i-MB - Number of Axes: 3 - X-Axis Travel: 760 mm - Y-Axis Travel: 610 mm - Z-Axis Travel: 610 mm - Table Size: Approx. 890 × 600 mm - Maximum Table Load: Approx. 907 kg - Spindle Speed: 12,000 rpm - Spindle Motor Power: 25 HP / approx. 18.6 kW - Spindle Taper: BT-40 - Automatic Tool Changer: 30 tools - Tool Change Time: Approx. 4 sec chip-to-chip - Rapid Traverse X/Y: Approx. 43 m/min - Rapid Traverse Z: Approx. 36 m/min - Spindle Nose to Table: Approx. 100–709 mm - Machine Dimensions: Approx. 3,940 × 2,340 × 2,340 mm - Machine Weight: Approx. 6,580 kg Fjdpfxozvf Suj Aggjgg

Condition: excellent (used), Year of construction: 2015, Mikron HPM 800U HD 5 axis Vertical Machining Centre, with 7 pallet changer (2015) Traverses XYZ: 800 x 800 x 550mm, Fgjdpfxezm Tice Aggsg 500 x 500mm table, A axis -91 / + 121 degrees, C axis, 360 degrees, Heidenhain TNC530, Spindle Speed 20,000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 165 tools, swarf conveyor, through spindle coolant,

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2011011, Edge grinding machine, Montresor model Lola 1000 8+6 SX • Belt running direction: LEFT to RIGHT, year of manufacture 2011 #2011011 • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 pneumatic upper chamfer supports • Belt infeed: Calibration/profiling support • Belt outfeed: Water nozzle support • Table extension console, extended • Machine footprint approximately: 610 x 180 cm • Infeed and outfeed path, each 250 cm Price: • EXW at the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories shown in the pictures are not included with the machine/scope of delivery. Payment terms: • 50% down payment upon order confirmation, 50% payment upon notification of shipping readiness. Warranty: • Machine sold as is, excluding any warranty claims. Inspection: • Possible at the operating site near Passau. Fgedjzwx Hujpfx Aggjg Availability: • After delivery of the new machine in December 2026 / January 2027.