Used extraction systems (stationary) for sale (144)

Condition: good (used), Year of construction: 2001, machine/vehicle number: 077359, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 22 A, input frequency: 50 Hz, volume flow: 7,500 m³/h, intake vacuum (max.): 30 mbar, suction capacity: 7,500 m³/h, intake manifold diameter: 300 mm, filter area: 36 m², noise level: 76 dB, actuation type: electric, total height: 4,000 mm, total length: 1,600 mm, total width: 2,250 mm, overall weight: 1,000 kg, year of last overhaul: 2025, Due to the purchase of new equipment to expand our machinery, this functional dust extraction unit is for sale. It can be inspected up to week 42; after that, we will dismantle it. The impeller was replaced in October 2025 – a parts invoice is available. Hsdpfx Aez Erfdjazou

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input current: 21 A, type of input current: DC, volume flow: 6,045 m³/h, overall weight: 1,100 kg, ALKO ECO JET 60/5 HD extraction unit, without control software. Hjdpfxsyrqnze Aazou Dust extraction unit, chip extraction, self-cleaning filter, vacuum-based ALKO ECO JET. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. It is ideally suited for all types of dry dust generated in various technological processes. Filter bags can be replaced according to specific requirements and intended use.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, total height: 3,500 mm, total length: 20,000 mm, total width: 2,500 mm, overall weight: 12,000 kg, Equipment: documentation/manual, The Modesta exhaust system is in good condition, is still installed, and can be seen in operation. Hedpfxsx Ezlfj Aazou It includes two automatic diverter valves, allowing you to choose whether to discharge into the bunker/silo or into two containers.

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) Hedpfsy Dc R Tjx Aazou New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Sold as seen, without warranty without guarantee

Condition: used, Year of construction: 1995, functionality: unexamined, suction capacity: 10,000 m³/h, actuation type: electric, We are selling a dust extraction system from Wipos that we no longer need. We used the system to blow the chips into a container. The container is not included in this auction. Hodpszunziefx Aazsu Inspection is possible. Price is ex works; the buyer must dismantle the system. On-site support is available. No warranty is provided for the system!

Condition: used, Year of construction: 2009, machine/vehicle number: 4006, functionality: fully functional, year of last overhaul: 2023, Equipment: documentation/manual, We are offering this used Riedex MD-450 stationary dust extraction system, manufactured in 2009, including the air filter unit. Manufacturer: Riedex Model: MD-450 Year of manufacture: 2009 Condition: used Category ID: 1413 Type ID: 586 Type: stationary dust extraction system If you have any questions or would like more information, please send us a message or call us. Hsdpfx Aaezxfrmezsu The machine is still in working order. You will be responsible for dismantling it.

Condition: used, Year of construction: 2008, machine/vehicle number: 1001877, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 14,100 m³/h, intake vacuum (max.): 450 mbar, suction capacity: 14,100 m³/h, intake manifold diameter: 450 mm, filter area: 125 m², actuation type: electric, total height: 5,800 mm, total length: 2,100 mm, total width: 2,100 mm, overall weight: 2,000 kg, Equipment: CE marking, documentation/manual, dust extraction, Schuko Ecovar extraction system, 14,000 m³/h – complete and operational Complete Schuko Ecovar industrial extraction system for sale, including a 22 kW main fan, a 7.5 kW transport fan, and the corresponding control system. The system is currently in operation and can be inspected while it is running. Due to an expansion of our capacity, this system will be replaced by a larger, new Schuko extraction system. Hedpfjz Egzmex Aazju An interesting complete system for companies looking for a powerful used extraction/filtration system with a capacity of approximately 14,000 m³/h. Key features * Capacity: approx. 14,000 m³/h * Filter area: 125 m² * Main fan: 22 kW * Transport fan: 7.5 kW * 100 filter hoses * Electric/pneumatic filter cleaning * Antistatic filter material * Includes the corresponding control system * Complete system * Currently in use and can be inspected while running Technical data for the filter system Brand: Schuko Type: Ecovar 04 22020/25/125, through-flow Design: overpressure, static Number of elements: 1 Material extraction: transport fan Filter material: antistatic polyester needle felt, BIA, AWN 05 Diameter of filter hoses: Ø 160 mm Length of filter hoses: 2,500 mm Number of filter hoses: 100 pieces Filter fabric area: 125 m² Filter cleaning: electric/pneumatic Weight: approx. 2,000 kg Dimensions of the filter system (L × W × H): approx. 2,100 × 2,100 × 6,000 mm Main fan Brand: Schuko Type: S 450/O/L2 Connection diameter: Ø 450 mm Capacity: 14,100 m³/h at 3,412 Pa Motor power: 22 kW Drive: direct Transport fan Brand: Schuko Type: TSK 250/O/S4 Connection diameter: Ø 250 mm Capacity: 4,500 m³/h at 3,344 Pa Motor power: 7.5 kW Drive: indirect Design: reinforced Condition and availability The extraction system is currently operational and is being sold only because it is being replaced by a new Schuko system with a larger capacity. This provides the opportunity to inspect the system while it is running before dismantling. Availability upon consultation. Dismantling and transport upon consultation. Serious interest? Please feel free to contact us for additional information, photos, technical data, or to arrange an appointment to inspect the system while it is running.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 020020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 4,500 m³/h, total height: 2,000 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 280 kg, For sale is a fully functional industrial dust extraction unit from HOLZING / MÜNALSAN, model RLA 125 VIBER. The unit is used, in good technical condition, and fully operational. It is ready for further use. The dust extraction unit is designed for industrial applications, including the extraction of dust, wood chips, and other contaminants generated during material processing. Technical data: Manufacturer: KMA Maszyny / MÜNALSAN Type: RLA 125 VIBER Year of manufacture: 2020 Serial number: 020020 Motor power: 3 kW Power supply: 400 V Frequency: 50 Hz Maximum capacity: approx. 4500 m³/h Unit weight: approx. 280 kg Solid, metal construction Installation with pipes and fittings as shown in the photos The unit has been inspected and is functioning correctly. The visual condition is as shown in the photos – normal signs of use, dirt, and wear are visible, but they do not affect the operation. We are selling the exact unit shown in the photos. Hedez D Sm Espfx Aazou It is possible to inspect the unit on-site before purchase. The stated price is indicative and does not constitute a binding offer. The final selling price will be determined individually after inspection and verification of the unit's technical condition. Due to its size and weight, personal collection is preferred. Transportation is also possible after prior arrangement.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, suction capacity: 30,000 m³/h, filter area: 152 m², actuation type: electric, total height: 3,500 mm, total length: 5,855 mm, total width: 1,920 mm, overall weight: 1,480 kg, Equipment: documentation/manual, The HOLZING RLA 1000 VIBER Power industrial stationary dust extraction unit is an advanced dust collection device designed for large production facilities and woodworking plants. Its design allows for outdoor installation, maximizing the use of space inside the production hall. Thanks to the integration of modern Viber Power technology, the unit continuously monitors operating parameters and automatically tracks the filter contamination level. The use of sound-absorbing enclosures for the fans effectively reduces noise generation, and the special blade geometry ensures maximum energy efficiency and stable vacuum pressure. Hodpfezv Sx Ijx Aazju

Condition: new, Year of construction: 2025, functionality: fully functional, Fan motor power - 5.5 kW Filtration area - 14.15 m² Number of filter bags - 15 Dimensions - 255x90x310 cm Power supply - 380 V Rated capacity - 6500 m³/h Hodjz Hckyspfx Aazou Year of manufacture - 2025

Condition: new, Year of construction: 2025, functionality: fully functional, Fan motor power – 5.5 kW Hedsz Hck Tjpfx Aazeu Filtration area – 19.8 m2 Number of filter bags – 21 Dimensions – 255x90x310 cm Power supply – 380V Rated capacity – 6500 m3/h Year of manufacture – 2025

Condition: used, Year of construction: 1998, machine/vehicle number: 980919, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 3,450 m³/h, intake vacuum (max.): 3,550 mbar, suction capacity: 3,450 m³/h, intake manifold diameter: 250 mm, filter area: 23 m², total height: 2,959 mm, total length: 2,500 mm, total width: 1,238 mm, overall weight: 750 kg, Used clean air system for two to three woodworking machines operating simultaneously. Suitable for outdoor installation. New filters are included. The control system is equipped with a speed control function via a frequency inverter. Hedpfxszukulj Aazju

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: Hsdpfx Aaozvz Tbszou - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: used, Year of construction: 2016, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,927 m³/h, suction capacity: 9,500 m³/h, intake manifold diameter: 350 mm, filter area: 42 m², noise level: 74 dB, total height: 2,420 mm, total length: 5,000 mm, total width: 1,250 mm, overall weight: 1,500 kg, Dust extraction system, wood chip extraction system, NESTRO NE 350 P self-cleaning negative pressure filter. Automatic filter cleaning with a pneumatic actuator. The fan is located on the clean air side, minimizing the risk of explosion. The unit is suitable for wide-belt sanding machines and all types of dry dust generated during various manufacturing processes. Fan power: 11 kW. Capacity: up to 9500 m3/h. Rated capacity: 6927 m3/h. Negative pressure: 2400 Pa. Nozzle diameter: 350 mm. Filtration area: 42 m2. Year of manufacture: 2016. Hjdpfxszdddyj Aazju Dimensions: Length: 5.00 m Depth: 1.25 m Height: 2.42 m Weight: 1500 kg Stock number: 1143

Condition: excellent (used), Year of construction: 2009, Equipment: CE marking, Small mixing system for 3 gases with fluctuating withdrawal rates, mixture withdrawal possible from zero up to maximum capacity, independent of pressure fluctuations, rapid cycling withdrawal possible, lockable viewing panel for protection against accidental adjustment, splash-proof stainless steel housing. Technical data: Mixing range: Oxygen: (0-25% vol.) Carbon dioxide: (0-10% vol.) Argon: (0-100% vol.) Inlet pressure bar: min 6 bar - max 20 bar dynamic Hsdjzrfmdspfx Aazju Outlet pressure bar: 3 bar Measuring pressure: 6 bar Volume flow: 0 - 173 NI/min Scope of supply: without container

Condition: ready for operation (used), Extraction system consisting of a filter unit, rotary valve airlock, and a fan. Hedpfx Aez Dtmyeazsu Filter data: Filter base area approx. 2000 x 2000 mm Filter unit height approx. 5000 mm Filters partially defective Return air duct Pipes from the filter to the fan Accessories: Rotary valve airlock approx. 1800 mm Fan: Output unknown (previously used to extract dust from a four-sided planer) Price ex works for self-dismantling Further technical data available upon request All information without guarantee

Condition: used, Year of construction: 2021, Dust extraction system Manufacturer: Felder Type: RL 300 Year of manufacture: 2021 - Like new, never used - Technical data - Airflow rate: max. 6000 m3/h - Rated airflow rate at 20 m/s: 5090 m3/h - Negative pressure at the total connection at 20 m/s: 2680 Pa - Dust extraction connection (can be mounted on the left or right): 300 mm - Filter area: 50 m2 Hedpezv Tmmjfx Aazsu - Sound pressure: 75 dB - Chip collection container (liters): 2 x 250 l Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2015, Complete extraction system, with briquetting press Consisting of: Chip container approx. 10 m³ Filter unit approx. 140 m² Fan, frequency-controlled, 15 kW Container discharge Briquetting press 60 to 90 kg/h Recirculation air components Control systems complete Pipe components complete for the system Spänex extraction system: completely disassembled, ready for transport from a public sector facility Components complete for the system Fire alarm Baffle silencer 1200 x 900 2 channel bends 90° 600 x 600 Transition 90° 600 x 600 to 1200 x 600 Transition outlet 550 / 320 x 350 Connection vent 320 x 350 / 1200 x 900 Perforated recirculation air pipes for air distribution D 630 mm: 3 x 1500 mm 1 x 1400 mm 1 x 1300 mm 2 bends 450 mm 90 r=300 mm 3 bends 450 mm 90 tight r=200 mm 5 pipes 4450 mm 1.0 m 1 bend 560 mm 90° 2 pipes 560 mm 1.0 m in top condition low operating hours Hodpfxszy Sfie Aazju Manufacturer: Spänex extraction system / IPE press Year of manufacture: 2015 press, system 1996 GS-tested CE-type tested Afterfilter Suction/blowing nozzle mm: 400 Suction nozzle mm: collecting duct Casing Fire hose motorized shaking with discharge gear Air recirculation Number of filter hoses: 215 Filter hose length mm: 1050 Filter hose diameter mm: 200 Filter category: BIA-tested Cat G/C Fan kW: negative pressure, high-performance fan, frequency-controlled, 15 kW, 1996, 10670 m³/h at 2500 pa Fan diameter: 400 Fan Pa: 2500 Length mm: 4500 Width mm: 3000 Height mm: 3200 Briquetting press: used in top condition low operating hours Manufacturer: IPE Type: ECOpress 90/10 Year of manufacture: 2015 Machine no.: 016615 GS-tested CE-type tested Motor kW: 7.5 Press output kg/h approx. material-dependent: 60 - 90 Briquet diameter mm approx.: 60 Filling cylinder Screw feed Location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee and warranty

Condition: used, Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Hsdpfx Aaozlbqrszou Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 2804221, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, volume flow: 18,000 m³/h, suction capacity: 18,000 m³/h, filter area: 60.6 m², actuation type: electric, The EK-24 unit is a dust and chip extraction and filtration system for wood and wood-based material processing. The unit is manufactured by the Polish company Euro-Komplex, which specializes in the design, production, and installation of comprehensive dust extraction systems used in various industries, particularly in woodworking and furniture factories. The filter effectively removes contaminants from multiple machines simultaneously, such as circular saws, panel saws, four-sided planers, veneer coating machines, CNC machines, milling plotters, and sanders. Technical specifications: • Airflow: 18,000 m³/h • Filtration area: 60.6 m² • Number of filters: 48 pcs / 2000mm / 200mm • Electrovibrator: 0.09 kW x 2 • Control cabinet with frequency converter • WTK fan • Air lock Hedpjzba E Ijfx Aazju • Dry fire tube The filter's robust and solid construction is made of hot-dip galvanized or powder-coated steel with a thickness of 2mm, and the inlet tunnel and reinforcements are made of 3mm steel. The structural elements are fastened with 8.8 screws with Teflon inserts. It is worth noting that the filter basket used is uniform and smooth, without welded elements, which facilitates airflow with waste fractions without depositing them on the basket walls. The EK-24 is equipped with an 0.09 kW electrovibrator in an ATEX system, used to clean the filter bags made of antistatic and waterproof material with a weight of 350g/m² and an air permeability of 240l/dm²/min. The cleaning system is fully automated and operates in appropriately selected time cycles adapted to the type of dust being extracted. Thanks to the use of an air return lock (summer/winter flap), in winter, the cleaned and filtered air returns to the production hall, which has a very beneficial effect on maintaining the appropriate temperature and provides measurable financial benefits. The WTK fans used in the EK-24 have self-cleaning impellers and a reinforced design, which guarantees stable operation for a long time. Electrical control is carried out using a control unit equipped with protection and a time control system for the electrovibrator and the fan motor. The control cabinet is equipped with a frequency converter, which enables the adjustment of the fan motor speed and provides very precise control. The air lock is used to separate the filter zone from the external zone. It blocks the airflow, allowing only wood chips to pass through, so they fall freely into the bag without an air blast. The air lock is equipped with a system that mitigates the impact of the impeller in case a large solid object enters the unit. It is equipped with a dry fire tube mounted on the filter, used to quickly supply water or extinguishing agent to the closed filter chamber using internal sprinklers. The installation is equipped with a fire brigade connection necessary to connect fire department equipment or a hose directly from a fire hydrant. The filter also has a pressure relief device, which lowers the pressure in the event of an explosion. It is designed to relieve an explosion developing inside a protected device, such as hoppers, silos, separators, filters, sorters, etc., where an explosion hazard exists. By releasing the explosion into the environment, the explosion pressure is reduced to a value below the allowable pressure resistance of the protected device.

Condition: excellent (used), Year of construction: 2015, Dust extractor for capturing, conveying, and sorting all types of wood dust and chips from their sources, as well as extracting and separating settled wood chips and dust.
1 x Modular vacuum filter 9/4-30, 3 units. Fans: 2 x US-FHN 15kW
Conveyor device: 1 x rotary airlock NZRS 2140x665 Total volumetric flow: 30,000 m3/h Hjdpjy Edxusfx Aazou

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 2407001, functionality: fully functional, operating hours: 1,000 h, power: 4 kW (5.44 HP), filter area: 10.5 m², noise level: 75 dB, total height: 1,735 mm, total length: 1,580 mm, total width: 550 mm, overall weight: 182 kg, nominal flow rate: 460 m³/h, negative pressure: 240 Pa, The unit was designed and installed as a single-station extraction system for a workshop area. It has hardly been used in the past 10 years, as the workshop concept has changed. The system is currently powered and can be inspected. Dismantling and collection must be carried out independently. Upon purchase agreement, the electrical connections will be disconnected from the central control cabinet. All system and installation documentation is available. Hedpfoyf Az Tex Aazju

Condition: good (used), Holtrop & Jansman MSO-250 Dust extraction system with negative pressure Connection diameter: 250 mm Capacity: approx. 4,000 m³/h at 2,000 Pa Motor power: 4 kW Fire protection flap Filter hoses: already replaced with an antistatic version. Hsdpfjzzmadjx Aazou

Condition: excellent (used), disassembly included in the price air return duct fan motor power: 15 kW screw conveyor total lock 72 filter bags mechanical filter cleaning transfer fan for sawdust Hedpfezvpxlox Aazou

Condition: used, functionality: fully functional, GGE Minisilos 7.5kw dust extraction unit Power: 7.5 kW Filter bag cleaning system Hedpez Ahw Tofx Aazsu 36 filter bags Filter bag diameter: 160 mm Filter bag length: 2000 mm Dust collection hopper with a capacity of 4.84 m³ Air recirculation to the hall is possible.