Used Becker Vx 4.40 for sale (463)

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Dcjdpfx Aey Uvfropbsn Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 7,839 h, load capacity: 2,500 kg, lifting height: 4,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, power: 44 kW (59.82 HP), Equipment: lighting, sideshift, trailer coupling, Diesel forklift JUNGHEINRICH DFG425s Year: 2017 Hours (according to meter): 7,839 Djdpeyuf Ubefx Apbscn Lifting capacity: 2.5 tons Overall height: 2.20 meters Lift height: 4.40 meters 44 kW - Triplex free lift mast - Sideshift - 4th hydraulic circuit - Work lights - Visually LIKE NEW! - Immediately ready for use! Sale price: €12,500,-- net Affordable delivery also possible!

Condition: used, Year of construction: 2022, power: 13 kW (17.68 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 8,500 kg, We are offering this used KiMLA BPF 2171 4-axis CNC machining center, manufactured in 2022. The package includes a KOGI dust extraction unit in a two-bag configuration (2.2 kW / 1,650 Pa), SCHMALZ distance and vacuum suction cups (suitable for 4-axis operation), an adjustable angular head for 4-axis machining, and a wide range of additional accessories. A valuation report is attached. Key features 4-axis machine – wide machining capabilities HSD 9 kW spindle, 24,000 rpm, ISO30 Automatic tool changer Dual vacuum foot with automatic lowering system Working area: 2,100 × 7,100 mm Tandem working mode: simultaneous machining on one side of the table while loading/unloading parts on the other, significantly increasing productivity Large working area enabling machining of non-standard and extra-long parts Pneumatic positioning pin system for fast and precise material positioning SCHMALZ vacuum cups for high-quality workpiece holding Condition and usage Machine currently in continuous production (can be inspected in operation) Regularly serviced Ready for immediate deployment Inspection in person or video presentation is possible. Additional equipment Chip extraction system included Optional (separate offer) Becker VariAir Control vacuum system Dodpfx Asy Exytjpbjcn Possibility to operate 2–3 CNC centers simultaneously, significantly improving energy efficiency Machine data Type: BPF Model: 2171 Serial number: 3586 Year of manufacture: 2022 Power supply: ~400 V Frequency: 50 Hz Power: 13 kW Weight: 8,500 kg Air pressure: 8 bar Axis travel (X × Y): 2,100 × 7,100 mm Z-axis travel: 400 mm Spindle: HSD 9 kW, 24,000 rpm, ISO30 Table type: Vacuum table Control system: 3D control module Drives: Digital AC servo drives Technology: High-Speed Machining (HSM) Tool length correction sensor included Control computer and operator panel included C-axis for angular aggregates Adjustable angle aggregate Extraction hood with support foot Automatic tool changer Rotary tool magazine Positioning pins, automatic (2 × 7 pcs) Base positioning pins (4 pcs) 6 SCHMALZ vacuum cups (single-ring type) PC-CAM machine control software Control system with dynamic toolpath optimization improving cutting smoothness and feed dynamics Integrated CAD/CAM module for part design and toolpath generation Remote diagnostics via internet Electronic gantry angle correction 20 kHz position controller frequency enabling higher dynamics, especially in curves Direct support for .dxf and .dwg files in control system Real-time hardware interpolation via control computer Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: refurbished (used), Year of construction: 2025, Equipment: documentation/manual, CMS NC SA32 TM R65 CNC machining center for woodworking and plastic machining. The machine was originally manufactured in the 1994 and underwent a complete control and drive retrofit in 2025. As part of the retrofit, the machine was equipped with: New OSAI OPENcontrol CNC system New servo drives and servo motors New control electronics and operator interface Modernized machine control architecture and programming environment This upgrade combines the reliability of a modern CNC system with the robust industrial construction of a heavy-duty CMS machining center. Technical Specifications X-axis travel: 3,250 mm Y-axis travel: 1,250 mm Z-axis travel: 250 mm Vacuum worktable size: 3,240 × 1,200 mm R65 revolver unit with 6-position rotating drum 25 high-speed electrospindles (18,000 rpm) and 5 electrospindles (9,000 rpm) Tool holders: ETS32 collets, MK2 Morse taper, hollow cutters Ø30 mm Feed speed up to 20,000 mm/min in X and Y axes Dual Becker VTLF250 vacuum pumps for workpiece clamping Machine weight: approx. 8,500 kg Equipment OSAI OPENcontrol CNC control system Vacuum workpiece clamping system Automatic centralized lubrication Hydraulic revolver positioning system Djdpfszv Si Tjx Apbecn Dust and chip extraction hood Complete technical documentation for both the machine and the new control system Condition The machine is fully operational and ready for production. The 2025 retrofit significantly improved reliability, serviceability, and future spare-parts availability while retaining the proven CMS mechanical structure. Inspection and testing under power are available by appointment. An additional identical CMS NC SA32 TM R65 machine is available and can be purchased separately either: as a spare parts machine, or as a complete operational machine with the original control system and software.

Condition: like new (used), 3 working axes working area X-2100mm, Y-3100mm maximum power consumption 14kW maximum spindle speed 24,000 rpm spindle mount ISO 30 Dcedozx Al Rspfx Apbjn air pressure 8 bar vacuum raster table, Becker pump 5.5 kW year of manufacture 2014 total power 17 kW total weight 3100 kg

Condition: good (used), We offer here a used UPC chuck with airdock ER-139501 / ER-078728. Additionally with an adapter pallet compatible with ER-115304 for use on milling, grinding, measuring, drilling and die-sinking EDM machines. The chuck has been cleaned and relubricated by us and is in very good technical condition. Please do not hesitate to contact us if you have any questions. Dcedpjviul Iefx Apbsn

Condition: good (used), Year of construction: 2009, I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table Year 2009. Configuration: 3-axis main spindle 6 KW Tool magazine 8 positions HSK63 1 grooving saw X-direction Dcodpfxett S D Rj Apben Drilling head 16+4+2 spindles Useful working area 3200 x 1060 x 378mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump BECKER 250 m3/hr. Good condition. Available immediately.

Condition: good (used), Hello, we offer used Erowa clamping beams in the following dimensions: Djdpfx Aeih Smaspbscn 220mm 300mm 380mm 460mm Other dimensions would also be available. Delivery possible for an extra charge. If you have any further inquiries, we will be happy to address them.

Condition: new, Year of construction: 2026, 2030 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. Dedpfsin Eqfox Apbscn SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist

Condition: new, Year of construction: 2026, Pros: • comprehensive processing (cutting, drilling, milling, engraving) Dcsdpfxein Erne Apben • stable structure guaranteeing maximum precision and reliability • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 1525 ATC milling ploter Dsdpfxsin Eyvs Apbjcn THE MACHINE HAS A TOOL STORAGE EQUIPPED WITH 6 ISO30 CONES !!! CNC 1525 ATC milling plotter is a precise machine constructed in Poland, it is used to process many engineering materials, i.e. wood, wood-based materials (chipboard, MDF, OSB etc.), plastics (plexiglass, PVC, HPL etc.), composites (dibond, carbon, alucobond), soft metals, etc. The ATC series machines have an additionally reinforced structure and the applied AC servo drives on each axis, coupled with an affordable price, leave the competition far behind. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: good (used), Hello, we are offering a used Erowa alignment pallet D 115 for sale. The pallet has been inspected and is fully functional. Dcedpfx Apsiryx Ijbjn

Condition: good (used), Year of construction: 2005, Truck-mounted aerial platform – Ruthmann T 265 Manufacturer: Ruthmann Model: T 265 Year of manufacture: 2005 Technical data Working height: 26.40 m Platform height: 24.40 m Lateral reach: 17.20 m Slew range: 450° Basket arm swivel angle: 200° Total weight: 7,490 kg Length: 9.35 m Width: 2.51 m Overhead clearance: 3.55 m Working platform size: 1.70 m x 1.00 m Platform load capacity: 350 kg Outriggers: Horizontal/Vertical Outrigger spread: 4.40 m on both sides / 3.45 m on one side / 2.50 m in profile Drive: Diesel Special equipment 220 V connection to the working platform Water/air pressure line to the working platform Platform exchange system Platform rotation +/- 45° Cab roof protection Driver's license class: 3 / C1 Dedpfx Apegy Tu Iebocn Dates/Status TÜV (technical inspection): valid until 01/2027 UVV (accident prevention regulations): valid until 11/2026 Mileage: 197,268 km as of 11/2025 Price quoted plus statutory VAT. Are you interested? We are always happy to assist you! You can reach us from Monday to Friday between 7:00 a.m. and 4:00 p.m.! Subject to changes and errors.

Condition: like new (used), functionality: fully functional, How do you do? We are offering used and compatible clamping devices from Erowa. These are suitable for die sinking and milling. Here are some of the available parts: ER-008617 Plug gauge Dedjvby U Sjpfx Apbscn ER-010723 Control mandrel ITS 50 ER-010561 Replacement probe pin ø 2mm ER-010560 Replacement probe pin ø 5mm ER-093992 Square 25 holder C F-Tool holder with square 25 ER-010592 Square 25 Alignment ruler ER-010495 Square 15 alignment ruler ER-129072 Uniplate Collet holder ø 72 ER16-ER50 Table probe with magnetic base 3D probe ø1-5 Steel pallet ø148mm All parts have been cleaned and checked by us. A functional test was also carried out. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: used, mileage: 110,000 km, power: 120 kW (163.15 HP), first registration: 08/2019, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 4,250 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: - 2nd battery (auxiliary battery) in engine compartment - Overhead storage in cab headliner - Passenger airbags - Aluminum trim at sliding door step - Tow bar: ball head, for increased trailer load - 3.5 t - 13-pin trailer socket - Electric roof ventilator II (cargo/passenger compartment) - Cargo area ceiling light with door contact - Entry handle on rear left D-pillar Dcedsy Nf T Uspfx Apbon - Entry handle on rear right D-pillar - Tachograph controls front under roof headliner - Chassis: Stabilization level II - Transmission lock for PTO - Grab handles on A-pillars - Additional main key - Rear door (opening angle 270 degrees) - Wooden floor in cargo area - Terminal strip for electrical connections (driver's seat base) - LED cargo area light - Cable duct at rear portal - Cable duct at side wall - Multimedia system MBUX (7" touchscreen) - PTO 2 B with layshaft - Parameterizable special module - Crossmember with integrated step - Smoker package - Spare wheel with same specification as driving tires - Spare wheel carrier under rear chassis incl. jack - Amber warning beacons (2) - Reversing camera - Acoustic reverse warning (external warning signal) - Wipers with rain sensor - Off-road chassis - Seat belt warning system with alert (passenger side) - Cabin seats: passenger double seat - Cabin seats: comfort driver's seat - Engine start/stop system - 12V socket in driver's cab - Additional separating relay with extra battery - USB port middle under dashboard (charging only) - AGM battery 92 Ah - Jack - Additional rear indicator lights (roof) Further equipment: - 2 extra main keys - Overhead parcel shelf - Aluminum protective strip, floor covering, entry - Trailer hitch for increased towing capacity 3.5 t incl. 13-pin socket - Fixing rails for roof rack - Passenger airbag - Passenger double seat - Warning film application - Hill start assist - Flat indicator lamps, extra rear on roof - Electric roof ventilator II - Load space ceiling light with door contact - Constant speed control - Eco start-stop function - Entry grip on rear left corner pillar - Transmission lock for PTO - Passenger seat belt warning device - Entry grab handles for driver and passenger - Wooden floor - Terminal strip for electrical connection - Controlled air conditioning TEMPMATIK - Comfort roof control unit - Comfort driver's seat - LED light strip in load compartment - M. Becker MobiE generator offer 18022287 - M+S tires - MBUX multimedia system with 7-inch touchscreen - PTO layshaft - Parameterizable special module - Crossmember with integrated step - Smoker package - Rain sensor - Spare wheel - Spare wheel holder under end of frame - Reversing camera - Reverse warning device - Double-wing rear door, opening up to side wall - Amber warning lights front left/rear right - Rough road version - Sortimo racking system - Stabilization level II - Socket in cab - Tank sender for auxiliary heater - Additional separating relay at battery - USB socket 5V - Additional features: Interchangeable ball/pin towing coupling - Additional features: Switchable additional hot air heating - Auxiliary battery for retrofit consumers, engine compartment 3rd brake light, storage compartment above windscreen, storage compartment below dashboard passenger side, adaptive brake light, driver's airbag, hill start assist, traction control (ASR), washer fluid level display, exterior mirrors electrically adjustable and heated, both sides, outside temperature display, cab roof lining, ...

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, empty load weight: 7,200 kg, working width: 1,535 mm, spindle speed (max.): 20,000 rpm, working height: 275 mm, working length: 6,200 mm, Submitting a bid obliges you to collect the machine by June 22, 2026! TECHNICAL DETAILS Number of milling spindles: 2 Milling spindle 1 Number of controlled axes: 5 Spindle speed: 1,000 - 20,000 rpm Main motor power: 9 kW Dsdpfx Aoy Tu Upjpbecn Milling spindle 2 Number of controlled axes: 3 Main motor power: 18.5 kW Tool changer positions: 22 Tool clamping system: HSK-F63 Working area X-axis: 6,200 mm Working area Y-axis: 1,535 mm Working area Z-axis: 275 mm X-axis maximum travel: 6,820 mm Y-axis maximum travel: 1,963 mm Table length: 6,200 mm Table width: 1,320 mm MACHINE DETAILS Software: BiesseWorks Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,400 x 2,500 mm Unladen weight: 7,200 kg Transport packages: 1 piece EQUIPMENT Vacuum pump Becker VTLF 250 (main motor power 5.5 kW; capacity 250 m³/h) Safety mat Pneumatic material clamping system Beam table CNC documentation: USB stick, user key/licenses

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 120 mm, total width: 4,600 mm, total height: 2,500 mm, spindle motor power: 10,000 W, product length (max.): 13,500 mm, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis HOLZHER Dynestic 7535 was manufactured in 2018. It features a working area of 3700 x 2100 x 120 mm and a powerful 10 kW spindle with a speed of 24,000 rpm. The machine includes an 18-position tool changer and a complete CNC nesting solution for high-performance cutting and drilling capabilities. If you are looking to get high-quality woodworking capabilities, consider the HOLZHER Dynestic 7535 wood mill we have for sale. Contact us for further details. • Control: Beckhoff TwinCAT 2 (PC-based) • Software: WorkCentre, NC-Hops, Cabinet Control, CAMPUS v7 • Tool holder: HSK-F63 • Tool changer: 18 positions (gantry-mounted) • Drilling unit: 10 vertical, 3 horizontal (4 X, 2 Y) • Saw unit: Groove saw integrated in X direction • Table type: Matrix table (gantry construction) • Automatic tool measurement: up to Ø20 mm • Power: 22 kW • CE marked • Key features: Complete CNC nesting solution; high-performance cutting and drilling; advanced control with DXF compatibility; auto lubrication and cooling system; offline programming capability included Djdjzug D Aepfx Apbecn • Additional services available upon request: • Mechanical and electrical decommissioning, as well as installation support • Basic application training (HOPS), depending on the operator’s experience • After-sales service, including warranty and potential service interventions handled by the seller (T&Cs apply)Please feel free to ask us for detailed pricing regarding these additional services. Additional equipment • Vacuum system: Becker, 250 m³/h • Air cushion table for easy material handling • Zoned safety mats for safe loading during operation • Additional saw blade holder (up to Ø350 mm)

Condition: used, mileage: 146,459 km, power: 100 kW (135.96 HP), first registration: 05/2017, fuel type: diesel, overall weight: 2,800 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 5, Year of construction: 2017, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 166 Mercedes-Benz Vito 114 CDI 4x4 MIXTO KOMPAKT. First owner. Paint code: * Sulfur Yellow MB 1216 Interior: * VY2 Fabric Tunja black Equipment: * 1216 Paint color Sulfur Yellow MB 1216 * 212L Berlin * C447 - * CF0 Basic chassis * CL1 Steering wheel adjustable in inclination and height * CL3 Leather steering wheel * CL4 Multifunction steering wheel with trip computer * D57 Partition, continuous to pillar C with window * E07 Hill-start assist * E1N Becker® MAP PILOT * E34 Buffer battery for starting * ED4 Fleece battery 12 V 92 Ah * EL8 Two-way front speakers * EN7 Audio 15 * F447 - * F61 Interior mirror * F66 Lockable glove compartment * F68 Heated and electrically adjustable exterior mirrors * FF1 Center console with storage compartment * FKB Combination vehicle * FR8 Rearview camera * FY7 Multi-button remote control * G42 7G-Tronic Plus * H00 Warm/cold air duct to passenger compartment * H15 Seat heating for front passenger * H16 Seat heating for driver * H20 Heat-insulating glass all around * HH9 Semi-automatic climate control system Tempmatic * HI1 Climate zone 1 (cold/comfort) * HZ0 Auxiliary heater, electric * IG5 Basic * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IL7 Topcoat, 1 additional coat * IN1 Wheelbase 3200 mm, short overhang * J55 Seatbelt warning system for front passenger seat * JA1 Warning lamp for windshield washer fluid level * JF1 Rain sensor * JK3 Instrument cluster with pixel-matrix display * JW8 Attention Assist * JX2 Service interval 40,000 km * KB5 Main tank 70 liters * KP4 AdBlue® tank, large * L Left-hand drive * LA2 Driving light assistant * LD0 Roof control unit with 2 reading spotlights * LD9 Interior light(s) in the rear * LE1 Adaptive brake light * LX5 Europe * M3B Electric fan, level 2 * M40 Generator 14V/200A * MA6 Emissions standard Euro 6b N1 * MG7 Engine OM651 DE 22 LA 100 kW (136 hp) * MG9 Generator management * MJ8 ECO Start-Stop function * MS1 Cruise control * MX0 BlueEFFICIENCY package * OA3 Customer service measure, diesel, control code 1 * OD4 Customer service measure, diesel, control code 4 * R21 Wheel size group 1 * RF9 Tire manufacturer Goodyear (90) * RG7 Tires 225/55 R17 * RM0 All-season tires * RS7 Steel wheels 6.5 J x 17 * SA6 Airbag, front passenger * SB1 Driver's seat, comfort * SB2 Front passenger seat, comfort * T14 Active locking mechanism for sliding door * T70 Child safety lock on doors in the passenger compartment * U65 Seating in passenger compartment, 3-seater bench seat, 1st row * V30 Side wall interior trim in cargo/passenger compartment Dcedpfx Apozt Ex Asbjn * V43 Wooden floor * VD2 Roof liner, standard * VV9 Attachment points in the roof frame * VY2 Fabric Tunja black * W16 Window, front left, fixed in side panel/sliding door * W17 Window, front right, fixed in side panel/sliding door * W65 Tailgate * X30 Vehicle registration certificate part 2 * XC9 Certificate of Conformity (COC) * XG6 Weight variant 2,800 kg * XN6 Model year U6-II * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signage/printed materials, German * XZ0 Model generation 0, model year 2010 * Y10 First-aid kit * Y44 Warning triangle * Z41 Approved as a truck * ZC5 Sales code 0 * ZG2 Permanent all-wheel drive * ZK4 Mixto GUARANTEE UP TO 36 MONTHS POSSIBLE. TRADE-IN AND FINANCING POSSIBLE. More vehicles available.

Condition: new, Year of construction: 2026, Working area: X - 1500mm, Y - 1500mm Z axis clearance: 300mm Worktable type: hybrid, i.e. vacuum + mechanical rails Number of vacuum sections: 2 Maximum working speed in slow motion: up to 40m/min Maximum Working speed: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm 9kW electrospindle, 24,000 rpm with full ceramic bearings Becker KVT 3.140 vacuum pump Drive: Full Leadshine AC servo drives with 750W power and high holding torque (double on the Y axis) Drive transmission: High-precision NIDEC SHIMPO planetary reducers Drive system: 25mm PMI linear guides and carriages with helical inclined strips with maximum contact area Guide lubrication system: Automatic Tool length measurement system: Automatic Control system: NK-105 G3 controller Standard CAD/CAM software: Artcam Open 2016 Optional CAD/CAM software: Vectric Cut 2D PRO (Ramp access function, automatic nesting) - additional cost: PLN 2,000 net Power supply: 3PH, 400V, 50-60Hz Dcsdpozr Ecrsfx Apbsn Fire-rated wiring, bendable and protected against deformation Machine dimensions 2360 / 2510 / 2415mm

Condition: used, mileage: 150,023 km, power: 105 kW (142.76 HP), first registration: 03/2018, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro6, total length: 6,961 mm, total width: 1,993 mm, total height: 2,612 mm, loading space length: 4,330 mm, loading space width: 1,780 mm, loading space height: 1,930 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Mercedes-Benz Sprinter II Box Van 314 CDI 4x2 !!! 6 identical Sprinters in stock !!! Wheelbase: 4325 mm Payload: 1144 kg Color: Silver Cargo area: Length: 4.33 m Width: 1.78 m Height: 1.93 m Dcedpfx Apezr Stdjbjn Special equipment: Audio system Audio 15 (radio with color display), Outside temperature display, Roof control unit with reading light (driver/passenger side), Rear door (opening angle 270 degrees), Wooden floor in the cargo area, Metallic paint, Navigation system Becker MAP Pilot, Parktronic system (PTS), Rear stabilizer, Reinforced front stabilizer, Rear door step, Interior paneling in the cargo/passenger compartment: plastic, Auxiliary heater (air) electric, Generator 250 A Additional equipment: 3rd brake light, Adaptive brake light, Airbag (driver side), Washer fluid level indicator, Exterior mirrors, electrically adjustable and heated, both sides, Exterior mirrors with integrated turn signal, Battery 74 Ah, Braking system with ABS+ASR, Roof lining in the cab, Lockable glove compartment, Body/superstructure: box van with high roof, Child safety lock, Fuel tank: main tank 75 liters, Full-height cargo area partition, Load securing/tie-down points, Headlight range adjustment, Model update, Engine 2.1 L - 105 kW CDI CAT, Wheelbase 4325 mm, Tire repair kit with compressor, Low emissions according to Euro 6 emission standard, Sliding door, cargo/passenger compartment, right side, Safety belt system with warning system (driver side), Seat cover/upholstery: fabric Lima, Seats in the cab: adjustable passenger seat, Service interval display Assyst, Heat-absorbing glass, Permissible total weight 3.50 t Cargo area with shelving system We would also be happy to assist you with financing/leasing through our partners. All information without guarantee. Errors and prior sale excepted.

Condition: used, mileage: 100,000 km, power: 100 kW (135.96 HP), first registration: 06/2020, fuel type: diesel, empty load weight: 1,921 kg, overall weight: 2,800 kg, next inspection (TÜV): 01/2028, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 3, total length: 4,895 mm, construction height: 1,910 mm, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, sliding door, soot filter, traction control, trailer coupling, * Please schedule an appointment by phone for a consultation or test drive before your visit. This will help you avoid waiting times, and allow us to dedicate sufficient time to you. * Non-smoking vehicle * This vehicle has a well-maintained digital service booklet with Mercedes-Benz. * Last service performed at 90,117 km. TRANSMISSION / CHASSIS * Drive type: All-wheel drive * 7G-Tronic Plus * Chassis with increased ground clearance APPEARANCE * Paint color: Arctic white LIGHTS & VISIBILITY * Daytime running lights * Fog lights * Aspherical exterior mirrors, both sides * 3rd brake light * Interior light in the cargo area * Windshield with integrated antenna * Exterior mirrors, electrically adjustable and heated, both sides ENTERTAINMENT * Becker MAP PILOT * Steering wheel with multifunction controls including trip computer * Instrument cluster with pixel-matrix display * Audio 15 * Two-way speakers ASSISTANCE SYSTEMS AND SAFETY * Active Parking Assist * Driver assistance system: Attention Assist (drowsiness detection sensor) * Driver assistance system: Breakdown management * Driver assistance system: Crosswind Assist * Speed limiter (cruise control) * Start/stop system * Brake assist * Adaptive Brake * Hill-start assist * Service interval indicator Assyst * Outside temperature display * Seatbelt system with warning system (driver/passenger side) * Mercedes-Benz emergency call system * 3-button remote control for central locking * Airbag, driver side * Airbag, passenger side * Head/shoulder airbag (thorax bag), driver/passenger side * Electronic Stability Program (ESP) * Braking system with ABS+ASR * Anti-lock braking system (ABS) * Immobilizer * Power steering COMFORT * Auxiliary heating (hot water) * Seats in the cab: driver's seat heated * Seats in the cab: driver's seat comfort * Sliding door, cargo/passenger compartment, right side * Steering wheel (steering column mechanically adjustable) * Window pillar trim * Passenger seat, single seat * Ambient lighting in the passenger/cargo area * Lockable glove compartment * Air conditioning, regulated (Tempmatik) * Insulated glazing * Cup holders, rear * Fleece battery 92 Ah * Tie-down points in the roof frame * Mounting rails for roof racks * Load anchoring / lashing eyes Dcodpfx Aoyadw Sspbon * Grab handle, passenger side * Lashing rails in the cargo area - side wall to roof frame * Trim in the cargo/passenger compartment: Hardboard, half-height * Solid cargo area partition * Floor covering: Passenger compartment, TPO * Electric windows, 2-way OTHER * Low emissions, compliant with emission standard Euro 6 * Tow hitch: fixed ball head * Trailer load 2500 kg * Registered as a truck * Body/superstructure: Standard van * Body/superstructure: Compact * Permissible gross weight 2.80 t * Fuel tank: enlarged * and much more * The above information is provided without guarantee. It does not constitute an agreed-upon specification. Errors and prior sale are subject to change. * Our services: * Financing possible, even without a down payment * Registration service * Trade-in of your old car * Delivery possible * Tire service, winter and summer tires available for an extra charge * We also speak various languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak * We look forward to your visit!

Year of construction: 2019, condition: good (used), Saroseal VI-2520 Vacuum / Gas Seal Machine The SaroVac VI machines use MSB technology. The Modular Sealing Bar system is an innovation that makes it possible to change the sealing bar width within a few minutes. All temperature, time and closing pressure settings are automatically adjusted to the change in width! Maintenance of the used sealing bar can be carried out in parallel without any problems, and the packaging process can continue. Manufacturer: Saropack Model: VI-2520 Year: 2019 Dcodpfx Apjx Ifqksben Max. seallength: 2.500 mm Max. welding width: 8 mm Max. film thickness: 50-100 my Power 3x 400V / 50Hz / 3,6kW Vacuum Pump: Becker 300m3/h Machine Dimensions LxWxH: 2.750x1.400x1.850 mm Machine Weight: 500 kg.

Condition: used, mileage: 17,309 km, power: 140 kW (190.35 HP), first registration: 01/2016, fuel type: diesel, overall weight: 5,000 kg, next inspection (TÜV): 10/2026, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Body/Construction: - Body/Type: Flatbed with tarpaulin body - Manufacturer - Sliding curtain on the right - Rear roller tarpaulin - Roof and side spoilers painted in vehicle color Equipment: - Tow bar with ball head, for increased towing capacity – 3.5 t - Fuel tank: main tank 100 liters - Metallic paintwork - Comfort suspension seat - Twin passenger bench seat - Rear wall trim Technology: - Audio system: Audio 15 - Navigation: Becker MAP Pilot - Multifunction steering wheel incl. trip computer - Reversing camera - Outside temperature display - Digital tachograph - Exterior mirrors electrically adjustable and heated Safety/Environment: - Airbags for driver and passenger - Hill-start assist - Brake system with ABS + ASR - Driver assistance system: Lane keeping assist - Low emissions according to Euro 6 standard Miscellaneous: - Truck registration - Facelift model - Engine: 3.0 liter – 140 kW CDI CAT - Wheelbase: 4,325 mm Dedexw Rukjpfx Apbscn - GVWR: 5.00 t Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approx. 200 vehicles available, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special low rates. Upon request, we will be happy to provide an individual offer for you! Trade-in of your commercial vehicle or construction machinery is welcome. If a new TÜV inspection is required, we will be glad to provide an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, price tags, and pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed features may need to be checked separately. Errors and prior sale excepted.

Condition: used, Year of construction: 1998, Manufacturer: Zanchetta (Romaco Group) Model: Rotolab Year : 1998 Dodpfxex R A Ifj Apbscn Type : High shear granulator mixer Capacity : 2 Litres Opening : lid Double heating jacket Crumbler = 1500 rpm Variable mixing speed : 20 – 955 rpm Heating integrated into the double jacket. Max. Max. bowl temperature 85°C, Heating jacket Connection for vacuum and nitrogen (.), Materials: Stainless steel Operating pressure: 0.6 MPa Becker vacuum pump: 1.25 KW    

Condition: used, mileage: 201,920 km, power: 92 kW (125.09 HP), first registration: 06/2009, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total width: 2,200 mm, total height: 3,200 mm, loading space length: 4,400 mm, loading space width: 2,150 mm, loading space height: 2,150 mm, * Mitsubishi Canter Fuso 3C13 * Twin tires * VIN: TYBFB833BE4DU06124 Dedpfxey Ng Umj Apbecn * Engine type: 4M4.2A3-73-40 * kW: 92 * Displacement: 2977 cc * Euro 5 * Unladen weight: 2790 kg * Payload: 635 kg * Gross weight: 3500 kg * Wheelbase: 3350 mm * Body internal length: 4.40 m * Body internal width: 2.15 m * Body internal height: 2.15 m * Vehicle length: 6300 mm * Vehicle width: 2200 mm * Vehicle height: 3200 mm * Tires: 195 / 75 R 16 C * Vehicle without VAT * All information provided without guarantee Tel./WhatsApp: